diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/voiceserviceprofile.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/voiceserviceprofile.go
new file mode 100644
index 0000000..d9827ed
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/voiceserviceprofile.go
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// VoiceServiceProfileClassID is the 16-bit ID for the OMCI
+// Managed entity Voice service profile
+const VoiceServiceProfileClassID = ClassID(58) // 0x003a
+
+var voiceserviceprofileBME *ManagedEntityDefinition
+
+// VoiceServiceProfile (Class ID: #58 / 0x003a)
+//	This ME organizes data that describe the voice service functions of the ONU. Instances of this
+//	ME are created and deleted by the OLT.
+//
+//	Relationships
+//		An instance of this ME may be associated with zero or more instances of a VoIP voice CTP by way
+//		of a VoIP media profile.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+//			(2-bytes)
+//
+//		Announcement Type
+//			This attribute specifies the treatment when a subscriber goes off hook but does not attempt a
+//			call within the dial-tone timeout interval. Valid values include the following.
+//
+//			0x01	Silence
+//
+//			0x02	Reorder tone
+//
+//			0x03	Fast busy
+//
+//			0x04	Voice announcement
+//
+//			0xFF	Not specified; ONU is free to make its own choice.
+//
+//			(R,-W, setbycreate) (mandatory) (1-byte)
+//
+//		Jitter Target
+//			This attribute specifies the target value of the jitter buffer in milliseconds. The system tries
+//			to maintain the jitter buffer at the target value. The value 0 specifies dynamic jitter buffer
+//			sizing. (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Jitter Buffer Max
+//			This attribute specifies the maximum depth of the jitter buffer associated with this service in
+//			milliseconds. The value 0 specifies that the ONU uses its internal default. (R,-W, set-by-
+//			create) (optional) (2-bytes)
+//
+//		Echo Cancel Ind
+//			The Boolean value true specifies that echo cancellation is on; false specifies off. (R,-W,
+//			setbycreate) (mandatory) (1-byte)
+//
+//		Pstn Protocol Variant
+//			This attribute controls which variant of POTS signalling is used on the associated UNIs. Its
+//			value is equal to the [ITU-T E.164] country code. The value 0 specifies that the ONU uses its
+//			internal default. (R,-W, set-by-create) (optional) (2-bytes)
+//
+//		Dtmf Digit Levels
+//			This attribute specifies the power level of DTMF digits that may be generated by the ONU towards
+//			the subscriber set. It is a 2s complement value referred to 1-mW at the 0 transmission level
+//			point (TLP) (dBm0), with resolution 1-dB. The default value 0x8000 selects the ONU's internal
+//			policy. (R, W, setbycreate) (optional) (2-bytes)
+//
+//		Dtmf Digit Duration
+//			This attribute specifies the duration of DTMF digits that may be generated by the ONU towards
+//			the subscriber set. It is specified in milliseconds. The default value 0 selects the ONU's
+//			internal policy. (R, W, setbycreate) (optional) (2 bytes)
+//
+//		Hook Flash Minimum Time
+//			This attribute defines the minimum duration recognized by the ONU as a switchhook flash. It is
+//			expressed in milliseconds; the default value 0 selects the ONU's internal policy. (R, W,
+//			setbycreate) (optional) (2 bytes)
+//
+//		Hook Flash Maximum Time
+//			This attribute defines the maximum duration recognized by the ONU as a switchhook flash. It is
+//			expressed in milliseconds; the default value 0 selects the ONU's internal policy. (R, W,
+//			setbycreate) (optional) (2 bytes)
+//
+//		Tone Pattern Table
+//			This attribute is a table, each of whose entries specifies a complex tone (or silence) and a
+//			duration. By linking tones and silence together, possibly cyclically, continuous, varying or
+//			interrupted tone sequences, repetitive or not, may be defined. A tone sequence is initiated by
+//			pointing to the first tone pattern table entry that defines its parameters. Each entry is a
+//			vector comprising the following components.
+//
+//			Index (1 byte): This component is simply an index into the table. It ranges from 1..255. In a
+//			set operation, the value 0 in this field clears the table.
+//
+//			Tone on (1 byte): This Boolean component controls whether the tone is on (true) or off. If the
+//			tone is off, the frequency and power fields are not meaningful.
+//
+//			Frequency 1 (2 bytes): This component specifies the frequency of one of the tone components in
+//			hertz.
+//
+//			Power 1 (1 byte): This component specifies the power level of the corresponding frequency
+//			component. It ranges from 0 (coded as 0) to  -25.5 (coded as 255)-dBm0 with 0.1-dB resolution.
+//
+//			Three additional pairs of frequency-power components may be specified to define a complex tone.
+//			If a pair of possibilities is not to be used, its frequency field should be set to 0.
+//
+//			Frequency 2 (2 bytes)
+//
+//			Power 2 (1 byte)
+//
+//			Frequency 3 (2 bytes)
+//
+//			Power 3 (1 byte)
+//
+//			Frequency 4 (2 bytes)
+//
+//			Power 4 (1 byte)
+//
+//			The following pair of frequency-power components allows the composite tone to be modulated
+//			(warble effect). If this effect is not to be used, the frequency should be set to 0.
+//
+//			Modulation frequency (2 bytes), hertz
+//
+//			Modulation power (1 byte), 0..25.5-dBm0
+//
+//			Duration (2 bytes): This component specifies the duration of the phase, in milliseconds. The
+//			value 0 specifies that the phase endures indefinitely, i.e., until terminated by other events
+//			such as call abandonment.
+//
+//			Next entry (1 byte): This component is a pointer to another entry in this same table, which
+//			permits sequences of tones to be defined, possibly cyclically. A reference to a non-existent
+//			table entry, or the value 0, indicates that the sequence should be terminated.
+//
+//			(R,-W) (optional) (N * 20 bytes)
+//
+//		Tone Event Table
+//			This attribute is a table, each of whose entries specifies an event for which a tone is defined.
+//			If the tone can be synthesized by a sequence of complex tones and silence, the event refers to
+//			an entry in the tone pattern table. Otherwise, the event refers to a file name that is expected
+//			to be recognized by the ONU environment. Each entry in the tone event table is a vector
+//			comprising the following components.
+//
+//			Event (1 byte): This component is an enumeration of the events for which a tone may be defined.
+//			The event component also serves as the index for the table. A set operation to event 0 causes
+//			the table to be cleared.
+//
+//			Tone pattern (1 byte): This component specifies an entry point into the tone pattern table
+//			attribute, to be invoked when the specified event occurs. The value 0 indicates that no tone
+//			from the tone pattern table is to be played.
+//
+//			Tone file (2 bytes): This component points to a large string ME that contains the path and name
+//			of a file containing a codec sequence to be played out. If no file is found after traversing
+//			these links, no tone is played. The behaviour is unspecified if both tone pattern and tone file
+//			are specified.
+//
+//			Tone file repetitions (1 byte): This component specifies the number of times the tone file is to
+//			be repeated. The value 0 means that the file is to be repeated indefinitely until terminated by
+//			some external event such as call abandonment.
+//
+//			Reserved (2 bytes)
+//
+//			(R,-W) (optional) (N * 7 bytes).
+//
+//		Ringing Pattern Table
+//			This attribute is a table, each of whose entries specifies a ringing pattern and a duration. By
+//			linking ringing and silence together, possibly cyclically, continuous or interrupted ringing
+//			sequences, repetitive or not, may be defined. A ringing sequence is initiated by pointing to the
+//			first ringing pattern table entry that defines its parameters. Each entry is a vector comprising
+//			the following components.
+//
+//			Index (1 byte): This component is simply an index into the table. It ranges from 1..255. In a
+//			set operation, the value 0 in this field clears the table.
+//
+//			Ringing on (1 byte): This Boolean component controls whether ringing is on (true) or off during
+//			this interval.
+//
+//			Duration (2 bytes): This component specifies the duration of the ringing phase, in milliseconds.
+//			The value 0 specifies that the phase endures indefinitely, i.e., until terminated by other
+//			events such as call abandonment.
+//
+//			Next entry (1 byte): This component is a pointer to another entry in this same table, which
+//			permits sequences of ringing bursts to be defined, possibly cyclically. A reference to a non-
+//			existent table entry, or the value 0, indicates that the sequence should be terminated.
+//
+//			(R,-W) (optional) (N * 5 bytes).
+//
+//		Ringing Event Table
+//			This attribute is a table, each of whose entries specifies an event for which a ringing sequence
+//			is defined. If the ringing sequence can be generated as a sequence of power ringing and silent
+//			intervals, the event refers to an entry in the ringing pattern table. Otherwise, the event
+//			refers to a file name that is expected to be recognized by the ONU environment. Each entry is a
+//			vector comprising the following components:
+//
+//			Event (1 byte): This component is an enumeration of the events for which a ringing sequence may
+//			be defined. The event component also serves as the index for the table. A set operation with the
+//			value 0 in this field causes the table to be cleared.
+//
+//			Ringing pattern (1 byte): This component specifies an entry point into the ringing pattern table
+//			attribute, to be invoked when the specified event occurs. The value 0 indicates that no ringing
+//			sequence is defined in the ringing pattern table.
+//
+//			Ringing file (2 bytes): This component points to a large string ME that contains the path and
+//			name of a file containing a ring tone to be played out. If no file is found after traversing
+//			these links, no ringing is played. The behaviour is unspecified if both ringing pattern and
+//			ringing file fields are specified.
+//
+//			Ringing file repetitions (1 byte): This component specifies the number of times the ringing file
+//			is to be repeated. The value 0 means that the file is to be repeated indefinitely until
+//			terminated by some external event such as call abandonment.
+//
+//			Ringing text (2 bytes): This component points to a large string ME that contains a text string
+//			to be displayed on the CPE device in conjunction with this event. A null pointer indicates that
+//			no text is to be displayed.
+//
+//			(R,-W) (optional) (N * 7 bytes).
+//
+//		Network Specific Extensions Pointer
+//			This attribute points to a network address ME that contains the path and name of a file
+//			containing network specific parameters for the associated UNIs. The default value for this
+//			attribute is 0xFFFF, a null pointer. (R,-W, set-by-create) (optional) (2-bytes)
+//
+type VoiceServiceProfile struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	voiceserviceprofileBME = &ManagedEntityDefinition{
+		Name:    "VoiceServiceProfile",
+		ClassID: 58,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			GetNext,
+			Set,
+			SetTable,
+		),
+		AllowedAttributeMask: 0xfffc,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1:  ByteField("AnnouncementType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+			2:  Uint16Field("JitterTarget", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+			3:  Uint16Field("JitterBufferMax", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+			4:  ByteField("EchoCancelInd", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+			5:  Uint16Field("PstnProtocolVariant", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+			6:  Uint16Field("DtmfDigitLevels", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+			7:  Uint16Field("DtmfDigitDuration", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+			8:  Uint16Field("HookFlashMinimumTime", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 8),
+			9:  Uint16Field("HookFlashMaximumTime", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 9),
+			10: TableField("TonePatternTable", TableAttributeType, 0x0040, TableInfo{nil, 20}, mapset.NewSetWith(Read, Write), false, true, false, 10),
+			11: TableField("ToneEventTable", TableAttributeType, 0x0020, TableInfo{nil, 7}, mapset.NewSetWith(Read, Write), false, true, false, 11),
+			12: TableField("RingingPatternTable", TableAttributeType, 0x0010, TableInfo{nil, 5}, mapset.NewSetWith(Read, Write), false, true, false, 12),
+			13: TableField("RingingEventTable", TableAttributeType, 0x0008, TableInfo{nil, 7}, mapset.NewSetWith(Read, Write), false, true, false, 13),
+			14: Uint16Field("NetworkSpecificExtensionsPointer", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 14),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+		Alarms: AlarmMap{
+			1: "File not found",
+		},
+	}
+}
+
+// NewVoiceServiceProfile (class ID 58) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVoiceServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*voiceserviceprofileBME, params...)
+}