[VOL-4396] OMCI lib update to be incorporated into ONU adapter, make use of relaxed decoding
Signed-off-by: mpagenko <michael.pagenkopf@adtran.com>
Change-Id: Ic8bc15ae061af8e27d73879f27bb5b80637a8dea
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/voipconfigdata.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/voipconfigdata.go
new file mode 100644
index 0000000..0e8f60e
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/voipconfigdata.go
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// VoipConfigDataClassID is the 16-bit ID for the OMCI
+// Managed entity VoIP config data
+const VoipConfigDataClassID = ClassID(138) // 0x008a
+
+var voipconfigdataBME *ManagedEntityDefinition
+
+// VoipConfigData (Class ID: #138 / 0x008a)
+// The VoIP configuration data ME defines the configuration for VoIP in the ONU. The OLT uses this
+// ME to discover the VoIP signalling protocols and configuration methods supported by this ONU.
+// The OLT then uses this ME to select the desired signalling protocol and configuration method.
+// The entity is conditionally required for ONUs that offer VoIP services.
+//
+// An ONU that supports VoIP services automatically creates an instance of this ME.
+//
+// Relationships
+// One instance of this ME is associated with the ONU.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. There is only one instance, number
+// 0. (R) (mandatory) (2-bytes)
+//
+// Available Signalling Protocols
+// This attribute is a bit map that defines the VoIP signalling protocols supported in the ONU. The
+// bit value 1 specifies that the ONU supports the associated protocol.
+//
+// 1 (LSB) SIP
+//
+// 2 ITU-T H.248
+//
+// 3 MGCP
+//
+// (R) (mandatory) (1-byte)
+//
+// Signalling Protocol Used
+// 0xFF Selected by non-OMCI management interface
+//
+// (R,-W) (mandatory) (1-byte)
+//
+// This attribute specifies the VoIP signalling protocol to use. Only one type of protocol is
+// allowed at a time. Valid values are:
+//
+// 0 None
+//
+// 1 SIP
+//
+// 2 ITU-T H.248
+//
+// 3 MGCP
+//
+// Available Voip Configuration Methods
+// This attribute is a bit map that indicates the capabilities of the ONU with regard to VoIP
+// service configuration. The bit value 1 specifies that the ONU supports the associated
+// capability.
+//
+// 1 (LSB) ONU capable of using the OMCI to configure its VoIP services.
+//
+// 2 ONU capable of working with configuration file retrieval to configure its VoIP services.
+//
+// 3 ONU capable of working with [BBF TR-069] to configure its VoIP services.
+//
+// 4 ONU capable of working with IETF sipping config framework to configure its VoIP services.
+//
+// Bits 5..24 are reserved by ITU-T. Bits 25..32 are reserved for proprietary vendor configuration
+// capabilities. (R) (mandatory) (4-bytes)
+//
+// Voip Configuration Method Used
+// Specifies which method is used to configure the ONU's VoIP service.
+//
+// 0 Do not configure - ONU default
+//
+// 1 OMCI
+//
+// 2 Configuration file retrieval
+//
+// 3 BBF TR-069
+//
+// 4 IETF sipping config framework
+//
+// 5..240 Reserved by ITU-T
+//
+// 241..255 Reserved for proprietary vendor configuration methods
+//
+// (R,-W) (mandatory) (1-byte)
+//
+// Voip Configuration Address Pointer
+// If this attribute is set to any value other than a null pointer, it points to a network address
+// ME, which indicates the address of the server to contact using the method indicated in the VoIP
+// configuration method used attribute. This attribute is only relevant for non-OMCI configuration
+// methods.
+//
+// If this attribute is set to a null pointer, no address is defined by this attribute. However,
+// the address may be defined by other methods, such as deriving it from the ONU identifier
+// attribute of the IP host config data ME and using a well-known URI schema.
+//
+// The default value is 0xFFFF (R,-W) (mandatory) (2-bytes)
+//
+// Voip Configuration State
+// Indicates the status of the ONU VoIP service.
+//
+// 0 Inactive: configuration retrieval has not been attempted
+//
+// 1 Active: configuration was retrieved
+//
+// 2 Initializing: configuration is now being retrieved
+//
+// 3 Fault: configuration retrieval process failed
+//
+// Other values are reserved. At ME instantiation, the ONU sets this attribute to 0. (R)
+// (mandatory) (1-byte)
+//
+// Retrieve Profile
+// This attribute provides a means by which the ONU may be notified that a new VoIP profile should
+// be retrieved. By setting this attribute, the OLT triggers the ONU to retrieve a new profile. The
+// actual value in the set action is ignored because it is the action of setting that is important.
+// (W) (mandatory) (1-byte)
+//
+// Profile Version
+// This attribute is a character string that identifies the version of the last retrieved profile.
+// (R) (mandatory) (25-bytes)
+//
+type VoipConfigData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ voipconfigdataBME = &ManagedEntityDefinition{
+ Name: "VoipConfigData",
+ ClassID: 138,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xff00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("AvailableSignallingProtocols", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+ 2: ByteField("SignallingProtocolUsed", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+ 3: Uint32Field("AvailableVoipConfigurationMethods", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+ 4: ByteField("VoipConfigurationMethodUsed", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: Uint16Field("VoipConfigurationAddressPointer", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+ 6: ByteField("VoipConfigurationState", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+ 7: ByteField("RetrieveProfile", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Write), false, false, false, 7),
+ 8: MultiByteField("ProfileVersion", OctetsAttributeType, 0x0100, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), true, false, false, 8),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "VCD config server name",
+ 1: "VCD config server reach",
+ 2: "VCD config server connect",
+ 3: "VCD config server validate",
+ 4: "VCD config server auth",
+ 5: "VCD config server timeout",
+ 6: "VCD config server fail",
+ 7: "VCD config file error",
+ 8: "VCD subscription name",
+ 9: "VCD subscription reach",
+ 10: "VCD subscription connect",
+ 11: "VCD subscription validate",
+ 12: "VCD subscription auth",
+ 13: "VCD subscription timeout",
+ 14: "VCD subscription fail",
+ 15: "VCD reboot request",
+ },
+ }
+}
+
+// NewVoipConfigData (class ID 138) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVoipConfigData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*voipconfigdataBME, params...)
+}