diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart2.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart2.go
new file mode 100644
index 0000000..6385cfd
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart2.go
@@ -0,0 +1,257 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslLineInventoryAndStatusDataPart2ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL line inventory and status data part 2
+const XdslLineInventoryAndStatusDataPart2ClassID = ClassID(101) // 0x0065
+
+var xdsllineinventoryandstatusdatapart2BME *ManagedEntityDefinition
+
+// XdslLineInventoryAndStatusDataPart2 (Class ID: #101 / 0x0065)
+//	This ME contains part 2 of the line inventory and status data for an xDSL UNI. The ONU
+//	automatically creates or deletes an instance of this ME upon the creation or deletion of a PPTP
+//	xDSL UNI part 1.
+//
+//	NOTE 1 - [ITU-T G.997.1] specifies that bit rate attributes have granularity of 1000-bit/s. If
+//	ITUT-G.997.1 compliance is required, the ONU should only report values with this granularity.
+//
+//	Relationships
+//		An instance of this ME is associated with an xDSL UNI.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of the PPTP xDSL UNI part 1. (R) (mandatory) (2-bytes)
+//
+//		Xdsl Transmission System
+//			This parameter defines the transmission system in use. It is a bit map, defined in Table
+//			9.7.12-1. (R) (mandatory) (7-bytes)
+//
+//			NOTE 2 - This attribute is only 7-bytes long. An eighth byte identifying VDSL2 capabilities in
+//			use is defined in the VDSL2 line inventory and status data part 1 ME.
+//
+//		Line Power Management State
+//			The line has four possible power management states.
+//
+//			0	L0: Synchronized - This line state occurs when the line has full transmission (i.e.,
+//			showtime).
+//
+//			1	L1: Power down data transmission - This line state occurs when there is transmission on the
+//			line, but the net data rate is reduced (e.g., only for OAM and higher layer connection and
+//			session control). This state applies to [ITU-T G.992.2] only.
+//
+//			2	L2: Power down data transmission - This line state occurs when there is transmission on the
+//			line, but the net data rate is reduced (e.g., only for OAM and higher layer connection and
+//			session control). This state applies to [ITU-T G.992.3] and [ITUT-G.992.4] only.
+//
+//			3	L3: No power - This line state occurs when no power is transmitted on the line at all.
+//
+//			(R) (mandatory) (1-byte)
+//
+//		Downstream Line Attenuation
+//			The LATNds attribute is the squared magnitude of the channel characteristics function H(f)
+//			averaged over this band, and measured during loop diagnostic mode and initialization. The exact
+//			definition is included in the relevant xDSL Recommendation. The attribute value ranges from 0
+//			(0.0-dB) to 1270 (127.0-dB) dB. The special value 0xFFFF indicates that line attenuation is out
+//			of range. (R) (mandatory) (2-bytes)
+//
+//			NOTE 3 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
+//			defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
+//			downstream line attenuation attribute should be set to 0 here, and populated in the VDSL2 line
+//			inventory and status data part 3 ME instead.
+//
+//		Upstream Line Attenuation
+//			NOTE 4 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
+//			defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
+//			upstream line attenuation attribute should be set to 0 here, and populated in the VDSL2 line
+//			inventory and status data part 3 ME instead.
+//
+//			The LATNus attribute is the squared magnitude of the channel characteristics function H(f)
+//			averaged over this band, and measured during loop diagnostic mode and initialization. The exact
+//			definition is included in the relevant xDSL Recommendation. The attribute value ranges from 0
+//			(0.0-dB) to 1270 (127.0-dB). The special value 0xFFFF indicates that line attenuation is out of
+//			range. (R) (mandatory) (2-bytes)
+//
+//		Downstream Signal Attenuation
+//			The SATNds attribute is the measured difference in the total power transmitted in this band by
+//			the xTUC and the total power received in this band by the xTUR during loop diagnostic mode,
+//			initialization and showtime. The exact definition is included in the relevant xDSL
+//			Recommendation. The attribute value ranges from 0 (0.0-dB) to 1270 (127.0-dB). The special value
+//			0xFFFF indicates that signal attenuation is out of range. (R) (mandatory) (2-bytes)
+//
+//			NOTE 5 - During showtime, only a subset of the subcarriers may be transmitted by the xTU-C, as
+//			compared to loop diagnostic mode and initialization. Therefore, the downstream signal
+//			attenuation value during showtime may be significantly lower than the downstream signal
+//			attenuation value during loop diagnostic mode and initialization.
+//
+//			NOTE 6 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
+//			defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
+//			downstream signal attenuation attribute should be set to 0 here, and populated in the VDSL2 line
+//			inventory and status data part 3 ME instead.
+//
+//		Upstream Signal Attenuation
+//			The SATNus attribute is the measured difference in decibels in the total power transmitted in
+//			this band by the xTUR and the total power received in this band by the xTUC during loop
+//			diagnostic mode, initialization and showtime. The exact definition is included in the relevant
+//			xDSL Recommendation. The attribute value ranges from 0 (0.0 dB) to 1270 (127.0-dB). The special
+//			value 0xFFFF indicates that signal attenuation is out of range. (R) (mandatory) (2-bytes)
+//
+//			NOTE 7 - During showtime, only a subset of the subcarriers may be transmitted by the xTU-R, as
+//			compared to loop diagnostic mode and initialization. Therefore, the upstream signal attenuation
+//			value during showtime may be significantly lower than the upstream signal attenuation value
+//			during loop diagnostic mode and initialization.
+//
+//			NOTE 8 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
+//			defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
+//			upstream signal attenuation attribute should be set to 0 here, and populated in the VDSL2 line
+//			inventory and status data part 3 ME instead.
+//
+//		Downstream Snr Ratio Margin
+//			The downstream SNR margin SNRMds is the maximum increase of noise power received at the xTUR,
+//			such that the BER requirements can still be met for all downstream bearer channels. The
+//			attribute value ranges from 0 (-64.0 dB) to 1270 (+63.0-dB). The special value 0xFFFF indicates
+//			that the attribute is out of range (R) (mandatory) (2-bytes)
+//
+//		Upstream Snr Margin
+//			The upstream SNR margin SNRMus is the maximum increase of noise power received at the xTUC, such
+//			that the BER requirements can still be met for all upstream bearer channels. The attribute value
+//			ranges from 0 (-64.0 dB) to 1270 (+63.0 dB). The special value 0xFFFF indicates that the
+//			attribute is out of range. (R) (mandatory) (2-bytes)
+//
+//		Downstream Maximum Attainable Data Rate
+//			The ATTNDRds attribute indicates the maximum downstream net data rate currently attainable. The
+//			rate is coded in bits per second. (R) (mandatory) (4-bytes)
+//
+//		Upstream Maximum Attainable Data Rate
+//			The ATTNDRus attribute indicates the maximum upstream net data rate currently attainable. The
+//			rate is coded in bits per second. (R) (mandatory) (4-bytes)
+//
+//		Downstream Actual Power Spectrum Density
+//			The ACTPSDds attribute is the average downstream transmit power spectrum density over the
+//			subcarriers in use (subcarriers to which downstream user data are allocated) delivered by the
+//			xTUC at the UC reference point, at the instant of measurement. The attribute value ranges from 0
+//			(-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special value (0xFFFF) indicates that the parameter is
+//			out of range. (R) (mandatory) (2-bytes)
+//
+//		Upstream Actual Power Spectrum Density
+//			The ACTPSDus attribute is the average upstream transmit power spectrum density over the
+//			subcarriers in use (subcarriers to which upstream user data are allocated) delivered by the xTUR
+//			at the UR reference point, at the instant of measurement. The attribute value ranges from 0
+//			(-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special value 0xFFFF indicates that the attribute is out
+//			of range. (R) (mandatory) (2-bytes)
+//
+//		Downstream Actual Aggregate Transmit Power
+//			The ACTATPds attribute is the total amount of transmit power delivered by the xTUC at the UC
+//			reference point, at the instant of measurement. The attribute value ranges from 0 (-31.0-dBm) to
+//			620 (+31.0-dBm). The special value (0xFFFF) indicates that the parameter is out of range. (R)
+//			(mandatory) (2-bytes)
+//
+//			NOTE 9 - The downstream nominal aggregate transmit power may be taken as a best estimate of the
+//			parameter.
+//
+//		Upstream Actual Aggregate Transmit Power
+//			NOTE 10 - The upstream nominal aggregate transmit power may be taken as a best estimate of the
+//			parameter.
+//
+//			The ACTATPus attribute is the total amount of transmit power delivered by the xTUR at the UR
+//			reference point, at the instant of measurement. The attribute value ranges from 0 (-31.0-dBm) to
+//			620 (+31.0-dBm). The special value (0xFFFF) indicates that the parameter is out of range. (R)
+//			(mandatory) (2-bytes)
+//
+//		Initialization _ Last State Transmitted Downstream
+//			Initialization - last state transmitted downstream: This attribute represents the last
+//			successful transmitted initialization state in the downstream direction in the last full
+//			initialization performed on the line. Initialization states are defined in the individual xDSL
+//			Recommendations and are counted from 0 (if [ITUT-G.994.1] is used) or 1 (if [ITUT-G.994.1] is
+//			not used) up to showtime. This parameter must be interpreted along with the xDSL transmission
+//			system capabilities.
+//
+//			This parameter is available only when, after a failed full initialization, line diagnostic
+//			procedures are activated on the line. Line diagnostic procedures can be activated by the
+//			operator of the system (through the loop diagnostics mode forced attribute of the xDSL line
+//			configuration profile part 3) or autonomously by the xTU-C or xTU-R.
+//
+//			(R) (mandatory) (1-byte)
+//
+//		Initialization _ Last State Transmitted Upstream
+//			Initialization - last state transmitted upstream: This attribute represents the last successful
+//			transmitted initialization state in the upstream direction in the last full initialization
+//			performed on the line. Initialization states are defined in the individual xDSL Recommendations
+//			and are counted from 0 (if [ITUT-G.994.1] is used) or 1 (if [ITUT-G.994.1] is not used) up to
+//			showtime. This parameter must be interpreted along with the xDSL transmission system
+//			capabilities.
+//
+//			This parameter is available only when, after a failed full initialization, line diagnostic
+//			procedures are activated on the line. Line diagnostic procedures can be activated by the
+//			operator of the system (through the loop diagnostics mode forced attribute of the xDSL line
+//			configuration profile part 3) or autonomously by the xTU-C or xTU-R.
+//
+//			(R) (mandatory) (1-byte)
+//
+type XdslLineInventoryAndStatusDataPart2 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	xdsllineinventoryandstatusdatapart2BME = &ManagedEntityDefinition{
+		Name:    "XdslLineInventoryAndStatusDataPart2",
+		ClassID: 101,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+		),
+		AllowedAttributeMask: 0xffff,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  MultiByteField("XdslTransmissionSystem", OctetsAttributeType, 0x8000, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 1),
+			2:  ByteField("LinePowerManagementState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+			3:  Uint16Field("DownstreamLineAttenuation", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+			4:  Uint16Field("UpstreamLineAttenuation", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+			5:  Uint16Field("DownstreamSignalAttenuation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
+			6:  Uint16Field("UpstreamSignalAttenuation", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+			7:  Uint16Field("DownstreamSnrRatioMargin", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
+			8:  Uint16Field("UpstreamSnrMargin", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
+			9:  Uint32Field("DownstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
+			10: Uint32Field("UpstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
+			11: Uint16Field("DownstreamActualPowerSpectrumDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
+			12: Uint16Field("UpstreamActualPowerSpectrumDensity", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
+			13: Uint16Field("DownstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
+			14: Uint16Field("UpstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
+			15: ByteField("InitializationLastStateTransmittedDownstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, false, false, 15),
+			16: ByteField("InitializationLastStateTransmittedUpstream", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, false, false, 16),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewXdslLineInventoryAndStatusDataPart2 (class ID 101) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslLineInventoryAndStatusDataPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*xdsllineinventoryandstatusdatapart2BME, params...)
+}