diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart5.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart5.go
new file mode 100644
index 0000000..4e0cf45
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart5.go
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslLineInventoryAndStatusDataPart5ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL line inventory and status data part 5
+const XdslLineInventoryAndStatusDataPart5ClassID = ClassID(325) // 0x0145
+
+var xdsllineinventoryandstatusdatapart5BME *ManagedEntityDefinition
+
+// XdslLineInventoryAndStatusDataPart5 (Class ID: #325 / 0x0145)
+//	This ME extends the attributes defined in the xDSL line inventory and status data parts 1..4.
+//	This ME reports FEXT and NEXT attributes, and pertains to Annex C of [ITUT G.992.3] (ADSL2) and
+//	Annex C of [ITUT G.992.5] (ADSL2plus).
+//
+//	Relationships
+//		This is one of the status data MEs associated with an xDSL UNI. The ONU automatically creates or
+//		deletes an instance of this ME upon creation or deletion of a PPTP xDSL UNI part 1 that supports
+//		these attributes.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R) (mandatory) (2-bytes)
+//
+//		Fext Downstream Snr Margin
+//			The FEXT SNRMds attribute is the downstream SNR margin measured during FEXTR duration at the
+//			ATU-R. The attribute value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF
+//			indicates that the attribute is out of range. (R) (mandatory) (2-bytes)
+//
+//		Next Downstream Snr Margin
+//			The NEXT SNRMds attribute is the downstream SNR margin measured during NEXTR duration at the
+//			ATU-R. The attribute value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF
+//			indicates that the attribute is out of range. (R) (mandatory) (2-bytes)
+//
+//		Fext Upstream Snr Margin
+//			The FEXT SNRMus attribute is the upstream SNR margin (see clause 7.5.1.16 of [ITUT G.997.1])
+//			measured during FEXTC duration at the ATU-C. The attribute value ranges from 0 (-64.0-dB) to
+//			1270 (+63.0-dB). The special value 0xFFFF indicates that the attribute is out of range. (R)
+//			(mandatory) (2-bytes)
+//
+//		Next Upstream Snr Margin
+//			The NEXT SNRMus attribute is the upstream SNR margin (see clause 7.5.1.16 of [ITUT-G.997.1])
+//			measured during NEXTC duration at the ATU-C. The attribute value ranges from 0 (-64.0-dB) to
+//			1270 (+63.0-dB). The special value 0xFFFF indicates that the attribute is out of range. (R)
+//			(mandatory) (2-bytes)
+//
+//		Fext Downstream Maximum Attainable Data Rate
+//			The FEXT ATTNDRds attribute is the maximum downstream net data rate calculated from FEXT
+//			downstream SNR(f) (see clause 7.5.1.28.3.1 of [ITUT G.997.1]). The rate is coded in bits per
+//			second. (R) (mandatory) (4-bytes)
+//
+//		Next Downstream Maximum Attainable Data Rate
+//			The NEXT ATTNDRds attribute is the maximum downstream net data rate calculated from NEXT
+//			downstream SNR(f) (see clause 7.5.1.28.3.2 of [ITUT G.997.1]). The rate is coded in bits per
+//			second. (R) (mandatory) (4-bytes)
+//
+//		Fext Upstream Maximum Attainable Data Rate
+//			The FEXT ATTNDRus attribute is the maximum upstream net data rate calculated from FEXT upstream
+//			SNR(f) (see clause 7.5.1.28.6.1 of [ITUT G.997.1]). The rate is coded in bits per second. (R)
+//			(mandatory) (4-bytes)
+//
+//		Next Upstream Maximum Attainable Data Rate
+//			The NEXT ATTNDRus attribute is the maximum upstream net data rate calculated from NEXT upstream
+//			SNR(f) (see clause 7.5.1.28.6.2 of [ITUT G.997.1]). The rate is coded in bits per second. (R)
+//			(mandatory) (4-bytes)
+//
+//		Fext Downstream Actual Power Spectral Density
+//			The FEXT ACTPSDds attribute is the average downstream transmit PSD over the used subcarriers
+//			(see clause-7.5.1.21.1 of [ITUT G.997.1]) calculated from the REFPSDds and RMSGIds for FEXTR
+//			duration. The attribute value ranges from 0  (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special
+//			value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Next Downstream Actual Power Spectral Density
+//			The NEXT ACTPSDds attribute is the average downstream transmit PSD over the used subcarriers
+//			(see clause-7.5.1.21.2 of [ITUT G.997.1]) calculated from the REFPSDds and RMSGIds for NEXTR
+//			duration. The attribute value ranges from 0  (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special
+//			value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Fext Upstream Actual Power Spectral Density
+//			The FEXT ACTPSDus attribute is the average upstream transmit PSD over the used subcarriers (see
+//			clause-7.5.1.22.1 of [ITUT G.997.1]) calculated from the REFPSDus and RMSGIus for FEXTC
+//			duration. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special
+//			value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Next Upstream Actual Power Spectral Density
+//			The NEXT ACTPSDus attribute is the average upstream transmit PSD over the used subcarriers (see
+//			clause-7.5.1.22.2 of [ITUT G.997.1]) calculated from the REFPSDus and RMSGIus for NEXTC
+//			duration. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special
+//			value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Fext Downstream Actual Aggregate Transmit Power
+//			The FEXT ACTATPds attribute is the total amount of transmit power (see clause 7.5.1.24.1 of
+//			[ITUT G.997.1]) calculated from PSDds measured during FEXTR duration at the ATU-R. The attribute
+//			value ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the
+//			parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Next Downstream Actual Aggregate Transmit Power
+//			The NEXT ACTATPds attribute is the total amount of transmit power (see clause 7.5.1.24.2 of
+//			[ITUT G.997.1]) calculated from PSDds measured during NEXTR duration at the ATU-R. The attribute
+//			value ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the
+//			parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Fext Upstream Actual Aggregate Transmit Power
+//			The FEXT ACTATPus attribute is the total transmit power (see clause 7.5.1.25.1 of [ITUT
+//			G.997.1]) calculated from PSDus measured during FEXTC duration at the ATU-C. The attribute value
+//			ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the
+//			parameter is out of range. (R) (mandatory) (2-bytes)
+//
+//		Next Upstream Actual Aggregate Transmit Power
+//			The NEXT ACTATPus attribute is the total transmit power (see clause 7.5.1.25.2 of [ITUT
+//			G.997.1]) calculated from PSDus measured during NEXTC duration at the ATU-C. The attribute value
+//			ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the
+//			parameter is out of range. (R) (mandatory) (2-bytes)
+//
+type XdslLineInventoryAndStatusDataPart5 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	xdsllineinventoryandstatusdatapart5BME = &ManagedEntityDefinition{
+		Name:    "XdslLineInventoryAndStatusDataPart5",
+		ClassID: 325,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+		),
+		AllowedAttributeMask: 0xffff,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  Uint16Field("FextDownstreamSnrMargin", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+			2:  Uint16Field("NextDownstreamSnrMargin", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+			3:  Uint16Field("FextUpstreamSnrMargin", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+			4:  Uint16Field("NextUpstreamSnrMargin", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+			5:  Uint32Field("FextDownstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
+			6:  Uint32Field("NextDownstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+			7:  Uint32Field("FextUpstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
+			8:  Uint32Field("NextUpstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
+			9:  Uint16Field("FextDownstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
+			10: Uint16Field("NextDownstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
+			11: Uint16Field("FextUpstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
+			12: Uint16Field("NextUpstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
+			13: Uint16Field("FextDownstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
+			14: Uint16Field("NextDownstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
+			15: Uint16Field("FextUpstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, false, false, 15),
+			16: Uint16Field("NextUpstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, false, false, 16),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewXdslLineInventoryAndStatusDataPart5 (class ID 325) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslLineInventoryAndStatusDataPart5(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*xdsllineinventoryandstatusdatapart5BME, params...)
+}