[VOL-5292] Implementation for fetching the GEM port history Data from the ONT
Change-Id: I4cf22555cbd13bcd5e49e620c8aa8b67cbd2891c
Signed-off-by: Akash Reddy Kankanala <akash.kankanala@radisys.com>
diff --git a/vendor/github.com/cespare/xxhash/v2/xxhash_amd64.s b/vendor/github.com/cespare/xxhash/v2/xxhash_amd64.s
index d580e32..3e8b132 100644
--- a/vendor/github.com/cespare/xxhash/v2/xxhash_amd64.s
+++ b/vendor/github.com/cespare/xxhash/v2/xxhash_amd64.s
@@ -1,215 +1,209 @@
+//go:build !appengine && gc && !purego
// +build !appengine
// +build gc
// +build !purego
#include "textflag.h"
-// Register allocation:
-// AX h
-// CX pointer to advance through b
-// DX n
-// BX loop end
-// R8 v1, k1
-// R9 v2
-// R10 v3
-// R11 v4
-// R12 tmp
-// R13 prime1v
-// R14 prime2v
-// R15 prime4v
+// Registers:
+#define h AX
+#define d AX
+#define p SI // pointer to advance through b
+#define n DX
+#define end BX // loop end
+#define v1 R8
+#define v2 R9
+#define v3 R10
+#define v4 R11
+#define x R12
+#define prime1 R13
+#define prime2 R14
+#define prime4 DI
-// round reads from and advances the buffer pointer in CX.
-// It assumes that R13 has prime1v and R14 has prime2v.
-#define round(r) \
- MOVQ (CX), R12 \
- ADDQ $8, CX \
- IMULQ R14, R12 \
- ADDQ R12, r \
- ROLQ $31, r \
- IMULQ R13, r
+#define round(acc, x) \
+ IMULQ prime2, x \
+ ADDQ x, acc \
+ ROLQ $31, acc \
+ IMULQ prime1, acc
-// mergeRound applies a merge round on the two registers acc and val.
-// It assumes that R13 has prime1v, R14 has prime2v, and R15 has prime4v.
-#define mergeRound(acc, val) \
- IMULQ R14, val \
- ROLQ $31, val \
- IMULQ R13, val \
- XORQ val, acc \
- IMULQ R13, acc \
- ADDQ R15, acc
+// round0 performs the operation x = round(0, x).
+#define round0(x) \
+ IMULQ prime2, x \
+ ROLQ $31, x \
+ IMULQ prime1, x
+
+// mergeRound applies a merge round on the two registers acc and x.
+// It assumes that prime1, prime2, and prime4 have been loaded.
+#define mergeRound(acc, x) \
+ round0(x) \
+ XORQ x, acc \
+ IMULQ prime1, acc \
+ ADDQ prime4, acc
+
+// blockLoop processes as many 32-byte blocks as possible,
+// updating v1, v2, v3, and v4. It assumes that there is at least one block
+// to process.
+#define blockLoop() \
+loop: \
+ MOVQ +0(p), x \
+ round(v1, x) \
+ MOVQ +8(p), x \
+ round(v2, x) \
+ MOVQ +16(p), x \
+ round(v3, x) \
+ MOVQ +24(p), x \
+ round(v4, x) \
+ ADDQ $32, p \
+ CMPQ p, end \
+ JLE loop
// func Sum64(b []byte) uint64
-TEXT ·Sum64(SB), NOSPLIT, $0-32
+TEXT ·Sum64(SB), NOSPLIT|NOFRAME, $0-32
// Load fixed primes.
- MOVQ ·prime1v(SB), R13
- MOVQ ·prime2v(SB), R14
- MOVQ ·prime4v(SB), R15
+ MOVQ ·primes+0(SB), prime1
+ MOVQ ·primes+8(SB), prime2
+ MOVQ ·primes+24(SB), prime4
// Load slice.
- MOVQ b_base+0(FP), CX
- MOVQ b_len+8(FP), DX
- LEAQ (CX)(DX*1), BX
+ MOVQ b_base+0(FP), p
+ MOVQ b_len+8(FP), n
+ LEAQ (p)(n*1), end
// The first loop limit will be len(b)-32.
- SUBQ $32, BX
+ SUBQ $32, end
// Check whether we have at least one block.
- CMPQ DX, $32
+ CMPQ n, $32
JLT noBlocks
// Set up initial state (v1, v2, v3, v4).
- MOVQ R13, R8
- ADDQ R14, R8
- MOVQ R14, R9
- XORQ R10, R10
- XORQ R11, R11
- SUBQ R13, R11
+ MOVQ prime1, v1
+ ADDQ prime2, v1
+ MOVQ prime2, v2
+ XORQ v3, v3
+ XORQ v4, v4
+ SUBQ prime1, v4
- // Loop until CX > BX.
-blockLoop:
- round(R8)
- round(R9)
- round(R10)
- round(R11)
+ blockLoop()
- CMPQ CX, BX
- JLE blockLoop
+ MOVQ v1, h
+ ROLQ $1, h
+ MOVQ v2, x
+ ROLQ $7, x
+ ADDQ x, h
+ MOVQ v3, x
+ ROLQ $12, x
+ ADDQ x, h
+ MOVQ v4, x
+ ROLQ $18, x
+ ADDQ x, h
- MOVQ R8, AX
- ROLQ $1, AX
- MOVQ R9, R12
- ROLQ $7, R12
- ADDQ R12, AX
- MOVQ R10, R12
- ROLQ $12, R12
- ADDQ R12, AX
- MOVQ R11, R12
- ROLQ $18, R12
- ADDQ R12, AX
-
- mergeRound(AX, R8)
- mergeRound(AX, R9)
- mergeRound(AX, R10)
- mergeRound(AX, R11)
+ mergeRound(h, v1)
+ mergeRound(h, v2)
+ mergeRound(h, v3)
+ mergeRound(h, v4)
JMP afterBlocks
noBlocks:
- MOVQ ·prime5v(SB), AX
+ MOVQ ·primes+32(SB), h
afterBlocks:
- ADDQ DX, AX
+ ADDQ n, h
- // Right now BX has len(b)-32, and we want to loop until CX > len(b)-8.
- ADDQ $24, BX
+ ADDQ $24, end
+ CMPQ p, end
+ JG try4
- CMPQ CX, BX
- JG fourByte
+loop8:
+ MOVQ (p), x
+ ADDQ $8, p
+ round0(x)
+ XORQ x, h
+ ROLQ $27, h
+ IMULQ prime1, h
+ ADDQ prime4, h
-wordLoop:
- // Calculate k1.
- MOVQ (CX), R8
- ADDQ $8, CX
- IMULQ R14, R8
- ROLQ $31, R8
- IMULQ R13, R8
+ CMPQ p, end
+ JLE loop8
- XORQ R8, AX
- ROLQ $27, AX
- IMULQ R13, AX
- ADDQ R15, AX
+try4:
+ ADDQ $4, end
+ CMPQ p, end
+ JG try1
- CMPQ CX, BX
- JLE wordLoop
+ MOVL (p), x
+ ADDQ $4, p
+ IMULQ prime1, x
+ XORQ x, h
-fourByte:
- ADDQ $4, BX
- CMPQ CX, BX
- JG singles
+ ROLQ $23, h
+ IMULQ prime2, h
+ ADDQ ·primes+16(SB), h
- MOVL (CX), R8
- ADDQ $4, CX
- IMULQ R13, R8
- XORQ R8, AX
-
- ROLQ $23, AX
- IMULQ R14, AX
- ADDQ ·prime3v(SB), AX
-
-singles:
- ADDQ $4, BX
- CMPQ CX, BX
+try1:
+ ADDQ $4, end
+ CMPQ p, end
JGE finalize
-singlesLoop:
- MOVBQZX (CX), R12
- ADDQ $1, CX
- IMULQ ·prime5v(SB), R12
- XORQ R12, AX
+loop1:
+ MOVBQZX (p), x
+ ADDQ $1, p
+ IMULQ ·primes+32(SB), x
+ XORQ x, h
+ ROLQ $11, h
+ IMULQ prime1, h
- ROLQ $11, AX
- IMULQ R13, AX
-
- CMPQ CX, BX
- JL singlesLoop
+ CMPQ p, end
+ JL loop1
finalize:
- MOVQ AX, R12
- SHRQ $33, R12
- XORQ R12, AX
- IMULQ R14, AX
- MOVQ AX, R12
- SHRQ $29, R12
- XORQ R12, AX
- IMULQ ·prime3v(SB), AX
- MOVQ AX, R12
- SHRQ $32, R12
- XORQ R12, AX
+ MOVQ h, x
+ SHRQ $33, x
+ XORQ x, h
+ IMULQ prime2, h
+ MOVQ h, x
+ SHRQ $29, x
+ XORQ x, h
+ IMULQ ·primes+16(SB), h
+ MOVQ h, x
+ SHRQ $32, x
+ XORQ x, h
- MOVQ AX, ret+24(FP)
+ MOVQ h, ret+24(FP)
RET
-// writeBlocks uses the same registers as above except that it uses AX to store
-// the d pointer.
-
// func writeBlocks(d *Digest, b []byte) int
-TEXT ·writeBlocks(SB), NOSPLIT, $0-40
+TEXT ·writeBlocks(SB), NOSPLIT|NOFRAME, $0-40
// Load fixed primes needed for round.
- MOVQ ·prime1v(SB), R13
- MOVQ ·prime2v(SB), R14
+ MOVQ ·primes+0(SB), prime1
+ MOVQ ·primes+8(SB), prime2
// Load slice.
- MOVQ b_base+8(FP), CX
- MOVQ b_len+16(FP), DX
- LEAQ (CX)(DX*1), BX
- SUBQ $32, BX
+ MOVQ b_base+8(FP), p
+ MOVQ b_len+16(FP), n
+ LEAQ (p)(n*1), end
+ SUBQ $32, end
// Load vN from d.
- MOVQ d+0(FP), AX
- MOVQ 0(AX), R8 // v1
- MOVQ 8(AX), R9 // v2
- MOVQ 16(AX), R10 // v3
- MOVQ 24(AX), R11 // v4
+ MOVQ s+0(FP), d
+ MOVQ 0(d), v1
+ MOVQ 8(d), v2
+ MOVQ 16(d), v3
+ MOVQ 24(d), v4
// We don't need to check the loop condition here; this function is
// always called with at least one block of data to process.
-blockLoop:
- round(R8)
- round(R9)
- round(R10)
- round(R11)
-
- CMPQ CX, BX
- JLE blockLoop
+ blockLoop()
// Copy vN back to d.
- MOVQ R8, 0(AX)
- MOVQ R9, 8(AX)
- MOVQ R10, 16(AX)
- MOVQ R11, 24(AX)
+ MOVQ v1, 0(d)
+ MOVQ v2, 8(d)
+ MOVQ v3, 16(d)
+ MOVQ v4, 24(d)
- // The number of bytes written is CX minus the old base pointer.
- SUBQ b_base+8(FP), CX
- MOVQ CX, ret+32(FP)
+ // The number of bytes written is p minus the old base pointer.
+ SUBQ b_base+8(FP), p
+ MOVQ p, ret+32(FP)
RET