WIP [VOL-2811] - Incorporate preliminary onu-adapter-go code into opencord repo
- reason "discovery-mibsync-complete" reached (via full MibUpload only, received data won't be stored yet)
- first review comments of patchset #4 considered
(please have a look into our inline-comments in Gerrit to know more about the current state)
- no refactoring done yet
Change-Id: Iac47817f8ce4bd28dd8132f530b0570d57ae99b8
Signed-off-by: Holger Hildebrandt <holger.hildebrandt@adtran.com>
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/dot1agchassis-managementinfo.go b/vendor/github.com/opencord/omci-lib-go/generated/dot1agchassis-managementinfo.go
new file mode 100644
index 0000000..166c9d5
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/dot1agchassis-managementinfo.go
@@ -0,0 +1,128 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Dot1AgChassisManagementInfoClassID is the 16-bit ID for the OMCI
+// Managed entity Dot1ag chassis-management info
+const Dot1AgChassisManagementInfoClassID ClassID = ClassID(306)
+
+var dot1agchassismanagementinfoBME *ManagedEntityDefinition
+
+// Dot1AgChassisManagementInfo (class ID #306)
+// This ME represents the system-level chassis ID or management address for [IEEE-802.1ag] CFM
+// messages, and potentially for other IEEE 802-based functions. Although [IEEE-802.1AB] allows for
+// several management addresses (synonyms in different formats or with granularity to the component
+// level), [IEEE-802.1ag] does not provide for more than one. Nor is it expected that an ONU would
+// require more than one format. Accordingly, this ME provides for only one.
+//
+// According to sender ID permission attributes in several dot1ag MEs, transmitted IEEE-802.1ag CFM
+// messages may include either or both of the chassis ID or management address
+// fields.[IEEE-802.1ag] requires that CCMs do not exceed 128-bytes, of which 74 are separately
+// allocated to other purposes; the sender ID TLV, if present, must accommodate this requirement.
+// The chassis info and management info must fit, with a minimum of 4 additional overhead bytes,
+// into the remaining 54-bytes. This limit is exploited in defining the maximum size of the ME's
+// attributes.
+//
+// Relationships
+// If an ONU supports [IEEE 802.1ag] functionality, it automatically creates an instance of this
+// ME.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies this ME. There is at most one instance,
+// whose value is 0. (R) (mandatory) (2-bytes)
+//
+// Chassis Id Length
+// Chassis ID length: The length of the chassis ID attribute (not including the chassis ID subtype
+// attribute), default value 0. (R,-W) (mandatory) (1-byte)
+//
+// Chassis Id Subtype
+// (R,-W) (mandatory) (1-byte)
+//
+// Chassis Id Part 1 Chassis Id Part 2
+// Chassis ID part 1, Chassis ID part 2: These two attributes may be regarded as an octet string of
+// up to 50-bytes whose length is given by the chassis ID length attribute and whose value is the
+// left-justified chassis ID. (R,-W) (mandatory) (25-bytes-*-2 attributes)
+//
+// Management Address Domain Length
+// Management address domain length: The length of the management address domain attribute, default
+// value 0. If this attribute has the value 0, all of the other management address attributes are
+// undefined. (R,-W) (mandatory) (1-byte)
+//
+// Management Address Domain 1, Management Address Domain 2
+// Management address domain 1, Management address domain 2: These two attributes may be regarded
+// as an octet string of up to 50-bytes whose length is given by the management address domain
+// length attribute and whose value is the left-justified management address domain. The attribute
+// is coded as an object identifier (OID) as per [ITUT X.690], referring to a TDomain as defined in
+// [IETF RFC 2579]. Typical domain values include snmpUDPDomain (from SNMPv2-TM [IETF RFC 3417])
+// and snmpIeee802Domain (from SNMP-IEEE 802-TM-MIB [IETF RFC 4789]). (R,-W) (mandatory) (25-bytes
+// * 2 attributes)
+//
+// Management Address Length
+// Management address length: The length of the management address attribute, default value 0.
+// (R,-W) (mandatory) (1-byte)
+//
+// Management Address 1 Management Address 2
+// Management address 1, Management address 2: These two attributes may be regarded as an octet
+// string of up to 50-bytes whose length is given by the management address length attribute and
+// whose value is the left-justified management address. (R,-W) (mandatory) (25-bytes * 2
+// attributes)
+//
+type Dot1AgChassisManagementInfo struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ dot1agchassismanagementinfoBME = &ManagedEntityDefinition{
+ Name: "Dot1AgChassisManagementInfo",
+ ClassID: 306,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfe00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("ChassisIdLength", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("ChassisIdSubtype", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+ 3: MultiByteField("ChassisIdPart1ChassisIdPart2", OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: ByteField("ManagementAddressDomainLength", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: MultiByteField("ManagementAddressDomain1,ManagementAddressDomain2", OctetsAttributeType, 0x0800, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 5),
+ 6: ByteField("ManagementAddressLength", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: MultiByteField("ManagementAddress1ManagementAddress2", OctetsAttributeType, 0x0200, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 7),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewDot1AgChassisManagementInfo (class ID 306) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewDot1AgChassisManagementInfo(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*dot1agchassismanagementinfoBME, params...)
+}