diff --git a/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointcesuni.go b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointcesuni.go
new file mode 100644
index 0000000..68f4887
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointcesuni.go
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointCesUniClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point CES UNI
+const PhysicalPathTerminationPointCesUniClassID ClassID = ClassID(12)
+
+var physicalpathterminationpointcesuniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointCesUni (class ID #12)
+//	This ME represents the point at a CES UNI in the ONU where the physical path terminates and
+//	physical level functions are performed.
+//
+//	The ONU automatically creates an instance of this ME per port:
+//
+//	o	when the ONU has CES ports built into its factory configuration;
+//
+//	o	when a cardholder is provisioned to expect a circuit pack of a CES type;
+//
+//	o	when a cardholder provisioned for plug-and-play is equipped with a circuit pack of a CES type.
+//	Note that the installation of a plug-and-play card may indicate the presence of CES ports via
+//	equipment ID as well as its type and indeed may cause the ONU to instantiate a port-mapping
+//	package that specifies CES ports.
+//
+//	The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+//	expect a CES circuit pack, nor is it equipped with a CES circuit pack.
+//
+//	Relationships
+//		An instance of this ME is associated with each real or pre-provisioned CES port. It can be
+//		linked from a GEM IW TP, a pseudowire TP or a logical N * 64 kbit/s CTP.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte
+//			number indicates the physical position of the UNI. The first byte is the slot ID (defined in
+//			clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+//		Expected Type
+//			Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+//		Sensed Type
+//			Sensed type:	If the value of expected type is not 0, then the value of sensed type equals the
+//			value of expected type. If expected type-= 0, then the value of sensed type is one of the
+//			compatible values from Table-9.1.5-1. Upon ME instantiation, the ONU sets this attribute to 0 or
+//			to the value that reflects the physically present equipment. (R) (mandatory if the ONU supports
+//			circuit packs with configurable interface types, e.g., C1.5/2/6.3) (1-byte)
+//
+//		Ces Loopback Configuration
+//			Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+//		Administrative State
+//			Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+//			ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+//		Operational State
+//			Operational state: This attribute indicates whether the ME is capable of performing its
+//			function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+//		Framing
+//			Upon ME instantiation, the ONU sets this attribute to a value that reflects the vendor's
+//			default. (R,-W) (optional) (1-byte)
+//
+//		Encoding
+//			Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory for DS1 and DS3
+//			interfaces) (1-byte)
+//
+//		Line Length
+//			Line length:	This attribute specifies the length of the twisted pair cable from a DS1 physical
+//			UNI to the DSX-1 cross-connect point or the length of coaxial cable from a DS3 physical UNI to
+//			the DSX-3 cross-connect point. Valid values are given in Table 9.8.1-1. Upon ME instantiation
+//			for a DS1 interface, the ONU assigns the value 0 for non-power feed type DS1 and the value 6 for
+//			power feed type DS1. Upon ME instantiation for a DS3 interface, the ONU sets this attribute to
+//			0x0F. (R,-W) (optional) (1-byte)
+//
+//		Ds1 Mode
+//			In the event of conflicting values between this attribute and the (also optional) line length
+//			attribute, the line length attribute is taken to be valid. This permits the separation of line
+//			build-out (LBO) and power settings from smart jack and FDL behaviour. Upon ME instantiation, the
+//			ONU sets this attribute to 0. (R,-W) (optional) (1-byte)
+//
+//		Arc
+//			ARC:	See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Arc Interval
+//			ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Line Type
+//			(R,-W) (mandatory for DS3, E3 and multi-configuration interfaces, not applicable to other
+//			interfaces) (1-byte)
+//
+type PhysicalPathTerminationPointCesUni struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	physicalpathterminationpointcesuniBME = &ManagedEntityDefinition{
+		Name:    "PhysicalPathTerminationPointCesUni",
+		ClassID: 12,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xfff0,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("ExpectedType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+			2:  ByteField("SensedType", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, false, false, 2),
+			3:  ByteField("CesLoopbackConfiguration", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, false, false, 3),
+			4:  ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+			5:  ByteField("OperationalState", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), true, true, false, 5),
+			6:  ByteField("Framing", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
+			7:  ByteField("Encoding", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+			8:  ByteField("LineLength", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+			9:  ByteField("Ds1Mode", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+			10: ByteField("Arc", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), true, true, false, 10),
+			11: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+			12: ByteField("LineType", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewPhysicalPathTerminationPointCesUni (class ID 12) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointCesUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*physicalpathterminationpointcesuniBME, params...)
+}