diff --git a/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointxdslunipart2.go b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointxdslunipart2.go
new file mode 100644
index 0000000..894c40a
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointxdslunipart2.go
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointXdslUniPart2ClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point xDSL UNI part 2
+const PhysicalPathTerminationPointXdslUniPart2ClassID ClassID = ClassID(99)
+
+var physicalpathterminationpointxdslunipart2BME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointXdslUniPart2 (class ID #99)
+//	This ME represents the point in the ONU where physical paths terminate on an xDSL CO modem
+//	(xTU-C). Standards and chip sets support several forms of DSL, including VDSL2, and the xDSL ME
+//	family is used for all of them, with specific extensions for technology variations.
+//
+//	The ONU creates or deletes an instance of this ME at the same time it creates or deletes the
+//	corresponding PPTP xDSL UNI part 1.
+//
+//	Relationships
+//		An instance of this ME is associated with each instance of a PPTP xDSL UNI part 1.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+//			identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R)
+//			(mandatory) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 0 Downstream
+//			xDSL channel configuration profile for bearer channel 0 downstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 1 Downstream
+//			xDSL channel configuration profile for bearer channel 1 downstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 2 Downstream
+//			xDSL channel configuration profile for bearer channel 2 downstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 3 Downstream
+//			xDSL channel configuration profile for bearer channel 3 downstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 0 Upstream
+//			xDSL channel configuration profile for bearer channel 0 upstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 1 Upstream
+//			xDSL channel configuration profile for bearer channel 1 upstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 2 Upstream
+//			xDSL channel configuration profile for bearer channel 2 upstream: 	(R,-W) (optional) (2-bytes)
+//
+//		Xdsl Channel Configuration Profile For Bearer Channel 3 Upstream
+//			xDSL channel configuration profile for bearer channel 3 upstream: 	(R,-W) (optional) (2-bytes)
+//
+type PhysicalPathTerminationPointXdslUniPart2 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	physicalpathterminationpointxdslunipart2BME = &ManagedEntityDefinition{
+		Name:    "PhysicalPathTerminationPointXdslUniPart2",
+		ClassID: 99,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xff00,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1: Uint16Field("XdslChannelConfigurationProfileForBearerChannel0Downstream", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, true, false, 1),
+			2: Uint16Field("XdslChannelConfigurationProfileForBearerChannel1Downstream", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, true, false, 2),
+			3: Uint16Field("XdslChannelConfigurationProfileForBearerChannel2Downstream", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, true, false, 3),
+			4: Uint16Field("XdslChannelConfigurationProfileForBearerChannel3Downstream", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+			5: Uint16Field("XdslChannelConfigurationProfileForBearerChannel0Upstream", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5),
+			6: Uint16Field("XdslChannelConfigurationProfileForBearerChannel1Upstream", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
+			7: Uint16Field("XdslChannelConfigurationProfileForBearerChannel2Upstream", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
+			8: Uint16Field("XdslChannelConfigurationProfileForBearerChannel3Upstream", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewPhysicalPathTerminationPointXdslUniPart2 (class ID 99) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointXdslUniPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*physicalpathterminationpointxdslunipart2BME, params...)
+}