WIP [VOL-2811] - Incorporate preliminary onu-adapter-go code into opencord repo
- reason "discovery-mibsync-complete" reached (via full MibUpload only, received data won't be stored yet)
- first review comments of patchset #4 considered
(please have a look into our inline-comments in Gerrit to know more about the current state)
- no refactoring done yet
Change-Id: Iac47817f8ce4bd28dd8132f530b0570d57ae99b8
Signed-off-by: Holger Hildebrandt <holger.hildebrandt@adtran.com>
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/reupstreamamplifier.go b/vendor/github.com/opencord/omci-lib-go/generated/reupstreamamplifier.go
new file mode 100644
index 0000000..0f81c6a
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/reupstreamamplifier.go
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// ReUpstreamAmplifierClassID is the 16-bit ID for the OMCI
+// Managed entity RE upstream amplifier
+const ReUpstreamAmplifierClassID ClassID = ClassID(315)
+
+var reupstreamamplifierBME *ManagedEntityDefinition
+
+// ReUpstreamAmplifier (class ID #315)
+// This ME organizes data associated with each upstream RE optical amplifier (OA) supported by the
+// RE. The management ONU automatically creates one instance of this ME for each upstream OA as
+// follows.
+//
+// o When the RE has mid-span PON RE upstream OA ports built into its factory configuration.
+//
+// o When a cardholder is provisioned to expect a circuit pack of the mid-span PON RE upstream OA
+// type.
+//
+// o When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the mid-
+// span PON RE upstream OA type. Note that the installation of a plug-and-play card may indicate
+// the presence of a mid-span PON RE upstream OA via equipment ID as well as its type attribute,
+// and indeed may cause the management ONU to instantiate a port-mapping package to specify the
+// ports precisely.
+//
+// The management ONU automatically deletes instances of this ME when a cardholder is neither
+// provisioned to expect a mid-span PON RE upstream OA circuit pack, nor is it equipped with a mid-
+// span PON RE upstream OA circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with an upstream OA, and with an instance of a circuit
+// pack. If the RE includes OEO regeneration in either direction, the RE upstream amplifier is also
+// associated with a PPTP RE UNI. Refer to clause-9.14.2 for further discussion.
+//
+// Attributes
+// Managed Entity Id
+// NOTE 1 - This ME ID may be identical to that of a PPTP RE UNI if it shares the same physical
+// slot and port.
+//
+// Administrative State
+// NOTE 2 - Administrative lock of an RE upstream amplifier results in LOS from any downstream
+// ONUs.
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Operational Mode
+// (R,-W) (mandatory) (1-byte)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Re Downstream Amplifier Pointer
+// RE downstream amplifier pointer: This attribute points to an RE downstream amplifier instance.
+// The default value is 0xFFFF, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+// Total Optical Receive Signal Level Table
+// Total optical receive signal level table: This table attribute reports a series of measurements
+// of time-averaged input upstream optical signal power. The measurement circuit should have a
+// temporal response similar to a simple 1 pole low pass filter, with an effective time constant on
+// the order of a GTC frame time. Each table entry has a 2-byte frame counter field (most
+// significant end), and a 2-byte power measurement field. The frame counter field contains the
+// least significant 16-bits of the superframe counter received closest to the time of the
+// measurement. The power measurement field is a 2s-complement integer referred to 1-mW (i.e.,
+// dBm), with 0.002-dB granularity. The RE equipment should add entries to this table as frequently
+// as is reasonable. The RE should clear the table once it is read by the OLT. (R) (optional) (4-*
+// N-bytes, where N is the number of measurements present.)
+//
+// Per Burst Receive Signal Level Table
+// Per burst receive signal level table: This table attribute reports the most recent measurement
+// of received burst upstream optical signal power. Each table entry has a 2-byte ONU-ID field
+// (most significant end), and a 2-byte power measurement field. The power measurement field is a
+// 2s-complement integer referred to 1-mW (i.e.,-dBm), with 0.002-dB granularity. (R) (optional)
+// (4-* N-bytes, where N is the number of distinct ONUs connected to the S'/R' interface.)
+//
+// Lower Receive Optical Threshold
+// Lower receive optical threshold: This attribute specifies the optical level that the RE uses to
+// declare the low received optical power alarm. Valid values are -127-dBm (coded as 254) to 0-dBm
+// (coded as 0) in 0.5-dB increments. The default value 0xFF selects the RE's internal policy.
+// (R,-W) (optional) (1-byte)
+//
+// Upper Receive Optical Threshold
+// Upper receive optical threshold: This attribute specifies the optical level that the RE uses to
+// declare the high received optical power alarm. Valid values are -127-dBm (coded as 254) to 0-dBm
+// (coded as 0) in 0.5-dB increments. The default value 0xFF selects the RE's internal policy.
+// (R,-W) (optional) (1-byte)
+//
+// Transmit Optical Signal Level
+// Transmit optical signal level: This attribute reports the current measurement of the mean
+// optical launch power of the upstream OA. Its value is a 2s-complement integer referred to 1-mW
+// (i.e., dBm), with 0.002-dB granularity. (R) (optional) (2-bytes)
+//
+// Lower Transmit Optical Threshold
+// Lower transmit optical threshold: This attribute specifies the minimum mean optical launch power
+// that the RE uses to declare the low transmit optical power alarm. Its value is a 2s-complement
+// integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value 0x7F selects
+// the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+// Upper Transmit Optical Threshold
+// Upper transmit optical threshold: This attribute specifies the maximum mean optical launch power
+// that the RE uses to declare the high transmit optical power alarm. Its value is a 2s complement
+// integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value 0x7F selects
+// the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+type ReUpstreamAmplifier struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ reupstreamamplifierBME = &ManagedEntityDefinition{
+ Name: "ReUpstreamAmplifier",
+ ClassID: 315,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ GetNext,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfff8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
+ 3: ByteField("OperationalMode", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: ByteField("Arc", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), true, true, false, 4),
+ 5: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5),
+ 6: Uint16Field("ReDownstreamAmplifierPointer", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: TableField("TotalOpticalReceiveSignalLevelTable", TableAttributeType, 0x0200, TableInfo{nil, 4}, mapset.NewSetWith(Read), false, true, false, 7),
+ 8: TableField("PerBurstReceiveSignalLevelTable", TableAttributeType, 0x0100, TableInfo{nil, 4}, mapset.NewSetWith(Read), false, true, false, 8),
+ 9: ByteField("LowerReceiveOpticalThreshold", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+ 10: ByteField("UpperReceiveOpticalThreshold", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+ 11: Uint16Field("TransmitOpticalSignalLevel", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11),
+ 12: ByteField("LowerTransmitOpticalThreshold", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+ 13: ByteField("UpperTransmitOpticalThreshold", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewReUpstreamAmplifier (class ID 315) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewReUpstreamAmplifier(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*reupstreamamplifierBME, params...)
+}