diff --git a/vendor/github.com/opencord/omci-lib-go/generated/xdslimpulsenoisemonitorperformancemonitoringhistorydata.go b/vendor/github.com/opencord/omci-lib-go/generated/xdslimpulsenoisemonitorperformancemonitoringhistorydata.go
new file mode 100644
index 0000000..6f725aa
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/xdslimpulsenoisemonitorperformancemonitoringhistorydata.go
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslImpulseNoiseMonitorPerformanceMonitoringHistoryDataClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL impulse noise monitor performance monitoring history data
+const XdslImpulseNoiseMonitorPerformanceMonitoringHistoryDataClassID ClassID = ClassID(324)
+
+var xdslimpulsenoisemonitorperformancemonitoringhistorydataBME *ManagedEntityDefinition
+
+// XdslImpulseNoiseMonitorPerformanceMonitoringHistoryData (class ID #324)
+//	This ME collects PM data from the impulse noise monitor function at both near and far ends.
+//	Instances of this ME are created and deleted by the OLT. Note that, unlike most xDSL PM, [ITU-T
+//	G.997.1] only requires current and previous 15-min interval storage; a longer view of this PM is
+//	not expected at 15-min granularity.
+//
+//	For a complete discussion of generic PM architecture, refer to clause I.4.
+//
+//	Relationships
+//		An instance of this ME may be associated with an xDSL UNI. This ME is meaningful only for ITUT
+//		G.993.2 VDSL2, [ITUT G.992.3] and [ITUT-G.992.5].
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. The ME ID is
+//			identical to that of this ME's parent PPTP xDSL UNI part 1. (R, setbycreate) (mandatory)
+//			(2-bytes)
+//
+//		Interval End Time
+//			Interval end time: This attribute identifies the most recently finished 15-min interval. (R)
+//			(mandatory) (1-byte)
+//
+//		Threshold Data 1_2 Id
+//			Threshold data 1/2 ID: No thresholds are defined for this ME. For uniformity with other PM, the
+//			attribute is retained and shown as mandatory, but it should be set to a null pointer. (R,-W,
+//			setbycreate) (mandatory) (2-bytes)
+//
+//		Inm Inpeq Histogram Table
+//			INM INPEQ histogram table: INMINPEQ1..17-L is a count of the near-end INMAINPEQi anomalies
+//			occurring on the line during the accumulation period. This parameter is subject to inhibiting -
+//			see clause 7.2.7.13 of [ITUT-G.997.1]. (R) (optional) (2-bytes * 17 entries-= 34-bytes)
+//
+//		Inm Total Measurement
+//			INM total measurement: INMME-L is a count of the near-end INMAME anomalies occurring on the line
+//			during the accumulation period. This parameter is subject to inhibiting - see clause 7.2.7.13 of
+//			[ITUT G.997.1]. (R) (optional) (2-bytes)
+//
+//		Inm Iat Histogram
+//			INM IAT histogram: INMIAT0..7-L is a count of the near-end INMAIATi anomalies occurring on the
+//			line during the accumulation period. This parameter is subject to inhibiting - see clause
+//			7.2.7.13 of [ITUT G.997.1]. (R) (optional) (2-bytes-* 8 entries-= 16-bytes)
+//
+//		Inm Inpeq Histogram Lfe Table
+//			INM INPEQ histogram LFE table: INMINPEQ1..17-LFE is a count of the far-end INMAINPEQi anomalies
+//			occurring on the line during the accumulation period. This parameter is subject to inhibiting -
+//			see clause 7.2.7.13 of [ITUT-G.997.1]. (R) (optional) (2-bytes * 17 entries-= 34-bytes)
+//
+//		Inm Total Measurement Lfe
+//			INM total measurement LFE: INMME-LFE is a count of the far-end INMAME anomalies occurring on the
+//			line during the accumulation period. This parameter is subject to inhibiting - see clause
+//			7.2.7.13 of [ITUT G.997.1]. (R) (optional) (2-bytes)
+//
+//		Inm Iat Histogram Lfe
+//			INM IAT histogram LFE: INMIAT0..7-LFE is a count of the far-end INMAIATi anomalies occurring on
+//			the line during the accumulation period. This parameter is subject to inhibiting - see clause
+//			7.2.7.13 of [ITUT G.997.1]. (R) (optional) (2-bytes-* 8 entries-= 16-bytes)
+//
+type XdslImpulseNoiseMonitorPerformanceMonitoringHistoryData struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	xdslimpulsenoisemonitorperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
+		Name:    "XdslImpulseNoiseMonitorPerformanceMonitoringHistoryData",
+		ClassID: 324,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			GetNext,
+			Set,
+		),
+		AllowedAttributeMask: 0xff00,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1: ByteField("IntervalEndTime", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+			2: Uint16Field("ThresholdData12Id", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+			3: TableField("InmInpeqHistogramTable", TableAttributeType, 0x2000, TableInfo{nil, 2}, mapset.NewSetWith(Read), false, true, false, 3),
+			4: Uint16Field("InmTotalMeasurement", CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, true, false, 4),
+			5: Uint16Field("InmIatHistogram", CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, true, false, 5),
+			6: TableField("InmInpeqHistogramLfeTable", TableAttributeType, 0x0400, TableInfo{nil, 2}, mapset.NewSetWith(Read), false, true, false, 6),
+			7: Uint16Field("InmTotalMeasurementLfe", CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, true, false, 7),
+			8: Uint16Field("InmIatHistogramLfe", CounterAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+	}
+}
+
+// NewXdslImpulseNoiseMonitorPerformanceMonitoringHistoryData (class ID 324) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslImpulseNoiseMonitorPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*xdslimpulsenoisemonitorperformancemonitoringhistorydataBME, params...)
+}