diff --git a/python/extensions/omci/tasks/__init__.py b/python/extensions/omci/tasks/__init__.py
new file mode 100644
index 0000000..b0fb0b2
--- /dev/null
+++ b/python/extensions/omci/tasks/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/python/extensions/omci/tasks/alarm_resync_task.py b/python/extensions/omci/tasks/alarm_resync_task.py
new file mode 100644
index 0000000..a16f3a2
--- /dev/null
+++ b/python/extensions/omci/tasks/alarm_resync_task.py
@@ -0,0 +1,393 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure, returnValue
+from twisted.internet import reactor
+from common.utils.asleep import asleep
+from voltha.extensions.omci.database.mib_db_dict import *
+from voltha.extensions.omci.omci_defs import AttributeAccess
+from voltha.extensions.omci.database.alarm_db_ext import AlarmDbExternal
+
+AA = AttributeAccess
+
+
+class AlarmCopyException(Exception):
+    pass
+
+
+class AlarmDownloadException(Exception):
+    pass
+
+
+class AlarmResyncException(Exception):
+    pass
+
+
+class AlarmResyncTask(Task):
+    """
+    OpenOMCI ALARM resynchronization Task
+
+    This task should get a copy of the ALARM and compare compare it to a
+    copy of the database. When the ALARM Upload command is sent to the ONU,
+    it should make a copy and source the data requested from this database.
+    The ONU can still source AVC's and the the OLT can still send config
+    commands to the actual.
+    """
+    task_priority = Task.DEFAULT_PRIORITY
+    name = "ALARM Resynchronization Task"
+
+    max_retries = 3
+    retry_delay = 7
+
+    max_alarm_upload_next_retries = 3
+    alarm_upload_next_delay = 10          # Max * delay < 60 seconds
+
+    def __init__(self, omci_agent, device_id):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        """
+        super(AlarmResyncTask, self).__init__(AlarmResyncTask.name,
+                                              omci_agent,
+                                              device_id,
+                                              priority=AlarmResyncTask.task_priority,
+                                              exclusive=False)
+        self._local_deferred = None
+        self._device = omci_agent.get_device(device_id)
+        self._db_active = MibDbVolatileDict(omci_agent)
+        self._db_active.start()
+
+    def cancel_deferred(self):
+        super(AlarmResyncTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start ALARM Re-Synchronization task
+        """
+        super(AlarmResyncTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_alarm_resync)
+        self._db_active.start()
+        self._db_active.add(self.device_id)
+
+    def stop(self):
+        """
+        Shutdown ALARM Re-Synchronization task
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        self._device = None
+        self._db_active.stop()
+        self._db_active = None
+        super(AlarmResyncTask, self).stop()
+
+    @inlineCallbacks
+    def perform_alarm_resync(self):
+        """
+        Perform the ALARM Resynchronization sequence
+
+        The sequence to be performed is:
+            - get a copy of the current ALARM database
+
+            - perform ALARM upload commands to get ONU's database and save this
+              to a local DB.
+        During the alarm upload process, the maximum time between alarm upload next
+        requests is 1 minute.
+        """
+        self.log.debug('perform-alarm-resync')
+
+        try:
+            self.strobe_watchdog()
+            results = yield self.snapshot_alarm()
+            olt_db_copy = results[0]
+            number_of_commands = results[1]
+
+            if olt_db_copy is None:
+                e = AlarmCopyException('Failed to get local database copy')
+                self.deferred.errback(failure.Failure(e))
+            else:
+                # Start the ALARM upload sequence, save alarms to the table
+                self.strobe_watchdog()
+
+                if number_of_commands > 0:
+                    commands_retrieved = yield self.upload_alarm(number_of_commands)
+                else:
+                    commands_retrieved = 0
+
+                if commands_retrieved != number_of_commands:
+                    e = AlarmDownloadException('Only retrieved {} of {} instances'.
+                                               format(commands_retrieved, number_of_commands))
+                    self.deferred.errback(failure.Failure(e))
+                else:
+                    # Compare the databases
+                    onu_db_copy = self._db_active.query(self.device_id)
+
+                    on_olt_only, on_onu_only, attr_diffs = \
+                        self.compare_mibs(olt_db_copy, onu_db_copy)
+
+                    on_olt_only = on_olt_only if len(on_olt_only) else None
+                    on_onu_only = on_onu_only if len(on_onu_only) else None
+                    attr_diffs = attr_diffs if len(attr_diffs) else None
+
+                    on_olt_only_diffs = on_olt_only if on_olt_only and len(on_olt_only) else None
+                    on_onu_only_diffs = on_onu_only if on_onu_only and len(on_onu_only) else None
+                    attr_diffs = attr_diffs if attr_diffs and len(attr_diffs) else None
+
+                    if all(diff is None for diff in [on_olt_only_diffs, on_onu_only_diffs, attr_diffs]):
+                        results = None
+                    else:
+                        results = {
+                            'onu-only': on_onu_only_diffs,
+                            'olt-only': on_olt_only_diffs,
+                            'attr-diffs': attr_diffs,
+                            'onu-db': onu_db_copy,
+                            'olt-db': olt_db_copy
+                        }
+                    self.deferred.callback(results)
+
+        except Exception as e:
+            self.log.exception('resync', e=e)
+            self.deferred.errback(failure.Failure(e))
+
+    @inlineCallbacks
+    def snapshot_alarm(self):
+        """
+        Snapshot the ALARM on the ONU and create a copy of our local ALARM database
+
+        :return: (pair) (command_sequence_number)
+        """
+        olt_db_copy = None
+        command_sequence_number = None
+
+        try:
+            max_tries = AlarmResyncTask.max_retries - 1
+
+            for retries in xrange(0, max_tries + 1):
+                # Send ALARM Upload so ONU snapshots its ALARM
+                try:
+                    command_sequence_number = yield self.send_alarm_upload()
+                    self.strobe_watchdog()
+
+                    if command_sequence_number is None:
+                        if retries >= max_tries:
+                            olt_db_copy = None
+                            break
+
+                except TimeoutError as e:
+                    self.log.warn('timeout', e=e)
+                    if retries >= max_tries:
+                        raise
+
+                    self.strobe_watchdog()
+                    yield asleep(AlarmResyncTask.retry_delay)
+                    continue
+
+                # Get a snapshot of the local MIB database
+                olt_db_copy = self._device.query_alarm_table()
+                # if we made it this far, no need to keep trying
+                break
+
+        except Exception as e:
+            self.log.exception('alarm-resync', e=e)
+            raise
+
+        # Handle initial failures
+
+        if olt_db_copy is None or command_sequence_number is None:
+            raise AlarmCopyException('Failed to snapshot ALARM copy after {} retries'.
+                                     format(AlarmResyncTask.max_retries))
+
+        returnValue((olt_db_copy, command_sequence_number))
+
+    @inlineCallbacks
+    def send_alarm_upload(self):
+        """
+        Perform ALARM upload command and get the number of entries to retrieve
+
+        :return: (int) Number of commands to execute or None on error
+        """
+        ########################################
+        # Begin ALARM Upload
+        try:
+            results = yield self._device.omci_cc.send_get_all_alarm()
+            self.strobe_watchdog()
+            command_sequence_number = results.fields['omci_message'].fields['number_of_commands']
+
+            if command_sequence_number < 0:
+                raise ValueError('Number of commands was {}'.format(command_sequence_number))
+
+            returnValue(command_sequence_number)
+
+        except TimeoutError as e:
+            self.log.warn('alarm-resync-get-timeout', e=e)
+            raise
+
+    @inlineCallbacks
+    def upload_alarm(self, command_sequence_number):
+        ########################################
+        # Begin ALARM Upload
+        seq_no = None
+
+        for seq_no in xrange(command_sequence_number):
+            max_tries = AlarmResyncTask.max_alarm_upload_next_retries
+
+            for retries in xrange(0, max_tries):
+                try:
+                    response = yield self._device.omci_cc.send_get_all_alarm_next(seq_no)
+                    self.strobe_watchdog()
+
+                    omci_msg = response.fields['omci_message'].fields
+                    alarm_class_id = omci_msg['alarmed_entity_class']
+                    alarm_entity_id = omci_msg['alarmed_entity_id']
+
+                    alarm_bit_map = omci_msg['alarm_bit_map']
+                    attributes = {AlarmDbExternal.ALARM_BITMAP_KEY: alarm_bit_map}
+
+                    # Save to the database
+                    self._db_active.set(self.device_id, alarm_class_id,
+                                        alarm_entity_id, attributes)
+                    break
+
+                except TimeoutError:
+                    self.log.warn('alarm-resync-timeout', seq_no=seq_no,
+                                  command_sequence_number=command_sequence_number)
+
+                    if retries < max_tries - 1:
+                        yield asleep(AlarmResyncTask.alarm_upload_next_delay)
+                        self.strobe_watchdog()
+                    else:
+                        raise
+
+                except Exception as e:
+                    self.log.exception('resync', e=e, seq_no=seq_no,
+                                       command_sequence_number=command_sequence_number)
+
+        returnValue(seq_no + 1)     # seq_no is zero based and alarm table.
+
+    def compare_mibs(self, db_copy, db_active):
+        """
+        Compare the our db_copy with the ONU's active copy
+
+        :param db_copy: (dict) OpenOMCI's copy of the database
+        :param db_active: (dict) ONU's database snapshot
+        :return: (dict), (dict), dict()  Differences
+        """
+        self.strobe_watchdog()
+
+        # Class & Entities only in local copy (OpenOMCI)
+        on_olt_only = self.get_lsh_only_dict(db_copy, db_active)
+
+        # Class & Entities only on remote (ONU)
+        on_onu_only = self.get_lsh_only_dict(db_active, db_copy)
+
+        # Class & Entities on both local & remote, but one or more attributes
+        # are different on the ONU.  This is the value that the local (OpenOMCI)
+        # thinks should be on the remote (ONU)
+
+        me_map = self.omci_agent.get_device(self.device_id).me_map
+        attr_diffs = self.get_attribute_diffs(db_copy, db_active, me_map)
+
+        return on_olt_only, on_onu_only, attr_diffs
+
+    def get_lsh_only_dict(self, lhs, rhs):
+        """
+        Compare two MIB database dictionaries and return the ME Class ID and
+        instances that are unique to the lhs dictionary. Both parameters
+        should be in the common MIB Database output dictionary format that
+        is returned by the mib 'query' command.
+
+        :param lhs: (dict) Left-hand-side argument.
+        :param rhs: (dict) Right-hand-side argument
+
+        return: (list(int,int)) List of tuples where (class_id, inst_id)
+        """
+        results = list()
+
+        for cls_id, cls_data in lhs.items():
+            # Get unique classes
+            #
+            # Skip keys that are not class IDs
+            if not isinstance(cls_id, int):
+                continue
+
+            if cls_id not in rhs:
+                results.extend([(cls_id, inst_id) for inst_id in cls_data.keys()
+                                if isinstance(inst_id, int)])
+            else:
+                # Get unique instances of a class
+                lhs_cls = cls_data
+                rhs_cls = rhs[cls_id]
+
+                for inst_id, _ in lhs_cls.items():
+                    # Skip keys that are not instance IDs
+                    if isinstance(cls_id, int) and inst_id not in rhs_cls:
+                        results.extend([(cls_id, inst_id)])
+
+        return results
+
+    def get_attribute_diffs(self, omci_copy, onu_copy, me_map):
+        """
+        Compare two OMCI MIBs and return the ME class and instance IDs that exists
+        on both the local copy and the remote ONU that have different attribute
+        values. Both parameters should be in the common MIB Database output
+        dictionary format that is returned by the mib 'query' command.
+
+        :param omci_copy: (dict) OpenOMCI copy (OLT-side) of the MIB Database
+        :param onu_copy: (dict) active ONU latest copy its database
+        :param me_map: (dict) ME Class ID MAP for this ONU
+
+        return: (list(int,int,str)) List of tuples where (class_id, inst_id, attribute)
+                                    points to the specific ME instance where attributes
+                                    are different
+        """
+        results = list()
+
+        # Get class ID's that are in both
+        class_ids = {cls_id for cls_id, _ in omci_copy.items()
+                     if isinstance(cls_id, int) and cls_id in onu_copy}
+
+        for cls_id in class_ids:
+            # Get unique instances of a class
+            olt_cls = omci_copy[cls_id]
+            onu_cls = onu_copy[cls_id]
+
+            # Get set of common instance IDs
+            inst_ids = {inst_id for inst_id, _ in olt_cls.items()
+                        if isinstance(inst_id, int) and inst_id in onu_cls}
+
+            for inst_id in inst_ids:
+                omci_attributes = {k for k in olt_cls[inst_id][ATTRIBUTES_KEY].iterkeys()}
+                onu_attributes = {k for k in onu_cls[inst_id][ATTRIBUTES_KEY].iterkeys()}
+
+                # Get attributes that exist in one database, but not the other
+                sym_diffs = (omci_attributes ^ onu_attributes)
+                results.extend([(cls_id, inst_id, attr) for attr in sym_diffs])
+
+                # Get common attributes with different values
+                common_attributes = (omci_attributes & onu_attributes)
+                results.extend([(cls_id, inst_id, attr) for attr in common_attributes
+                               if olt_cls[inst_id][ATTRIBUTES_KEY][attr] !=
+                                onu_cls[inst_id][ATTRIBUTES_KEY][attr]])
+        return results
diff --git a/python/extensions/omci/tasks/file_download_task.py b/python/extensions/omci/tasks/file_download_task.py
new file mode 100755
index 0000000..63da427
--- /dev/null
+++ b/python/extensions/omci/tasks/file_download_task.py
@@ -0,0 +1,108 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure, AlreadyCalledError
+from twisted.internet import reactor
+from voltha.extensions.omci.omci_defs import ReasonCodes
+import requests
+import os
+import time
+
+class FileDownloadTask(Task):
+    name = "Image File Download Task"
+    CHUNK_SIZE = 1024
+    
+    def __init__(self, omci_agent, img_dnld, clock= None): #device_id, url, local_path)
+        super(FileDownloadTask, self).__init__(FileDownloadTask.name, omci_agent, img_dnld.id,
+                                               exclusive=False,
+                                               watchdog_timeout=45)
+        # self.url = url
+        # self.local_path = local_path
+        self._image_download = img_dnld
+        self.reactor = clock if clock is not None else reactor
+        self._local_deferred = None
+        # self._request = None
+        # self._file = None
+        # self.log.debug('{} running'.format(FileDownloadTask.name))
+
+    # def __save_data(self):
+    #     chunk = self._request.iter_content(chunk_size=FileDownloadTask.CHUNK_SIZE)
+    #     if len(chunk) == 0:
+    #         self._file.close()
+    #         self.deferred.callback(self._image_download)
+    #     else:
+    #         self._file.write(chunk)
+    #         self._image_download.downloaded_bytes += len(chunk)
+    #         self.reactor.callLater(0, self.__save_data)        
+
+    @inlineCallbacks
+    def perform_download_data(self):
+        try:
+            r = requests.get(self._image_download.url, stream=True)
+            with open(self._image_download.local_dir + '/' + self._image_download.name, 'wb') as f:
+                for chunk in r.iter_content(chunk_size=FileDownloadTask.CHUNK_SIZE):
+                    self.strobe_watchdog()
+                    if chunk: # filter out keep-alive new chunks
+                        yield f.write(chunk)
+                        self._image_download.file_size += len(chunk)
+                        # yield time.sleep(1)
+            self.deferred.callback(self._image_download)
+        except Exception as e:
+            self.deferred.errback(failure.Failure(e))
+        
+    def start(self):
+        super(FileDownloadTask, self).start()
+        if not os.path.exists(self._image_download.local_dir):
+            os.makedirs(self._image_download.local_dir)
+
+        self.strobe_watchdog()
+        self._image_download.file_size = 0
+        self._local_deferred = self.reactor.callLater(0, self.perform_download_data)
+        # try:
+        #     if not os.path.exists(self._image_download.local_dir):
+        #         os.makedirs(self._image_download.local_dir)
+
+        #     self.strobe_watchdog()
+        #     self._image_download.downloaded_bytes = 0
+        #     self.reactor.callLater(0, self.perform_download_data)
+            
+            # self._request = requests.get(self._image_download.url, stream=True)
+            # with open(self._image_download.local_dir + '/' + self._image_download.name, 'wb') as f:
+            #     for chunk in r.iter_content(chunk_size=FileDownloadTask.CHUNK_SIZE):
+            #         self.strobe_watchdog()
+            #         if chunk: # filter out keep-alive new chunks
+            #             f.write(chunk)
+            #             self._image_download.downloaded_bytes += len(chunk)
+            
+            # self.deferred.callback(self._image_download)
+        # except Exception as e:
+        #     self.deferred.errback(failure.Failure(e))
+            
+    # def stop(self):
+    #     # self.cancel_deferred()
+    #     super(FileDownloadTask, self).stop()
+
+    def cancel_deferred(self):
+        self.log.debug('FileDownloadTask cancel_deferred')
+        super(FileDownloadTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
diff --git a/python/extensions/omci/tasks/get_mds_task.py b/python/extensions/omci/tasks/get_mds_task.py
new file mode 100644
index 0000000..1560c83
--- /dev/null
+++ b/python/extensions/omci/tasks/get_mds_task.py
@@ -0,0 +1,112 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure
+from voltha.extensions.omci.omci_me import OntDataFrame
+from voltha.extensions.omci.omci_defs import ReasonCodes as RC
+
+
+class GetMdsTask(Task):
+    """
+    OpenOMCI Get MIB Data Sync value task
+
+    On successful completion, this task will call the 'callback' method of the
+    deferred returned by the start method and return the value of the MIB
+    Data Sync attribute of the ONT Data ME
+    """
+    task_priority = Task.DEFAULT_PRIORITY
+    name = "Get MDS Task"
+
+    def __init__(self, omci_agent, device_id):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        """
+        super(GetMdsTask, self).__init__(GetMdsTask.name,
+                                         omci_agent,
+                                         device_id,
+                                         priority=GetMdsTask.task_priority)
+        self._local_deferred = None
+
+    def cancel_deferred(self):
+        super(GetMdsTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start MIB Synchronization tasks
+        """
+        super(GetMdsTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_get_mds)
+
+    def stop(self):
+        """
+        Shutdown MIB Synchronization tasks
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        super(GetMdsTask, self).stop()
+
+    @inlineCallbacks
+    def perform_get_mds(self):
+        """
+        Get the 'mib_data_sync' attribute of the ONU
+        """
+        self.log.debug('perform-get-mds')
+
+        try:
+            device = self.omci_agent.get_device(self.device_id)
+
+            #########################################
+            # Request (MDS supplied value does not matter for a 'get' request)
+
+            self.strobe_watchdog()
+            results = yield device.omci_cc.send(OntDataFrame().get())
+
+            omci_msg = results.fields['omci_message'].fields
+            status = omci_msg['success_code']
+
+            # Note: Currently the data reported by the Scapy decode is 16-bits since we need
+            #       the data field that large in order to support MIB and Alarm Upload Next
+            #       commands.  Select only the first 8-bits since that is the size of the MIB
+            #       Data Sync attribute
+            mds = (omci_msg['data']['mib_data_sync'] >> 8) & 0xFF \
+                if 'data' in omci_msg and 'mib_data_sync' in omci_msg['data'] else -1
+
+            self.log.debug('ont-data-mds', status=status, mib_data_sync=mds)
+
+            assert status == RC.Success, 'Unexpected Response Status: {}'.format(status)
+
+            # Successful if here
+            self.deferred.callback(mds)
+
+        except TimeoutError as e:
+            self.log.warn('get-mds-timeout', e=e)
+            self.deferred.errback(failure.Failure(e))
+
+        except Exception as e:
+            self.log.exception('get-mds', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/interval_data_task.py b/python/extensions/omci/tasks/interval_data_task.py
new file mode 100644
index 0000000..d41c1d0
--- /dev/null
+++ b/python/extensions/omci/tasks/interval_data_task.py
@@ -0,0 +1,198 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from datetime import datetime
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure
+from voltha.extensions.omci.omci_defs import ReasonCodes
+from voltha.extensions.omci.omci_frame import OmciFrame, OmciGet
+
+
+class IntervalDataTaskFailure(Exception):
+    pass
+
+
+class IntervalDataTask(Task):
+    """
+    OpenOMCI Performance Interval Get Request
+    """
+    task_priority = Task.DEFAULT_PRIORITY
+    name = "Interval Data Task"
+    max_payload = 29
+
+    def __init__(self, omci_agent, device_id, class_id, entity_id,
+                 max_get_response_payload=max_payload,
+                 parent_class_id=None,
+                 parent_entity_id=None,
+                 upstream=None):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        :param class_id: (int) ME Class ID
+        :param entity_id: (int) ME entity ID
+        :param max_get_response_payload: (int) Maximum number of octets in a
+                                               single GET response frame
+        """
+        super(IntervalDataTask, self).__init__(IntervalDataTask.name,
+                                               omci_agent,
+                                               device_id,
+                                               priority=IntervalDataTask.task_priority,
+                                               exclusive=False)
+        self._local_deferred = None
+        self._class_id = class_id
+        self._entity_id = entity_id
+
+        self._parent_class_id = parent_class_id
+        self._parent_entity_id = parent_entity_id
+        self._upstream = upstream
+
+        me_map = self.omci_agent.get_device(self.device_id).me_map
+        if self._class_id not in me_map:
+            msg = "The requested ME Class () does not exist in the ONU's ME Map".format(self._class_id)
+            self.log.warn('unknown-pm-me', msg=msg)
+            raise IntervalDataTaskFailure(msg)
+
+        self._entity = me_map[self._class_id]
+        self._counter_attributes = self.get_counter_attributes_names_and_size()
+        self._max_payload = max_get_response_payload
+
+    def cancel_deferred(self):
+        super(IntervalDataTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start the tasks
+        """
+        super(IntervalDataTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_get_interval)
+
+    def stop(self):
+        """
+        Shutdown the tasks
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        super(IntervalDataTask, self).stop()
+
+    def get_counter_attributes_names_and_size(self):
+        """
+        Get all of the counter attributes names and the amount of storage they take
+
+        :return: (dict) Attribute name -> length
+        """
+        return {name: self._entity.attributes[attr_index].field.sz
+                for name, attr_index in self._entity.attribute_name_to_index_map.items()
+                if self._entity.attributes[attr_index].is_counter}
+
+    @inlineCallbacks
+    def perform_get_interval(self):
+        """
+        Sync the time
+        """
+        self.log.info('perform-get-interval', class_id=self._class_id,
+                      entity_id=self._entity_id)
+
+        device = self.omci_agent.get_device(self.device_id)
+        attr_names = self._counter_attributes.keys()
+
+        final_results = {
+            'class_id': self._class_id,
+            'entity_id': self._entity_id,
+            'me_name': self._entity.__name__,   # Mostly for debugging...
+            'interval_utc_time': None,
+            'parent_class_id': self._parent_class_id,
+            'parent_entity_id': self._parent_entity_id,
+            'upstream': self._upstream
+            # Counters added here as they are retrieved
+        }
+        last_end_time = None
+
+        while len(attr_names) > 0:
+            # Get as many attributes that will fit. Always include the 1 octet
+            # Interval End Time Attribute and 2 octets for the Entity ID
+
+            remaining_payload = self._max_payload - 3
+            attributes = list()
+            for name in attr_names:
+                if self._counter_attributes[name] > remaining_payload:
+                    break
+
+                attributes.append(name)
+                remaining_payload -= self._counter_attributes[name]
+
+            attr_names = attr_names[len(attributes):]
+            attributes.append('interval_end_time')
+
+            frame = OmciFrame(
+                transaction_id=None,
+                message_type=OmciGet.message_id,
+                omci_message=OmciGet(
+                    entity_class=self._class_id,
+                    entity_id=self._entity_id,
+                    attributes_mask=self._entity.mask_for(*attributes)
+                )
+            )
+            self.log.debug('interval-get-request', class_id=self._class_id,
+                           entity_id=self._entity_id)
+            try:
+                self.strobe_watchdog()
+                results = yield device.omci_cc.send(frame)
+
+                omci_msg = results.fields['omci_message'].fields
+                status = omci_msg['success_code']
+                end_time = omci_msg['data'].get('interval_end_time')
+
+                self.log.debug('interval-get-results', class_id=self._class_id,
+                               entity_id=self._entity_id, status=status,
+                               end_time=end_time)
+
+                if status != ReasonCodes.Success:
+                    raise IntervalDataTaskFailure('Unexpected Response Status: {}, Class ID: {}'.
+                                                  format(status, self._class_id))
+                if last_end_time is None:
+                    last_end_time = end_time
+
+                elif end_time != last_end_time:
+                    msg = 'Interval End Time Changed during retrieval from {} to {}'\
+                        .format(last_end_time, end_time)
+                    self.log.info('interval-roll-over', msg=msg, class_id=self._class_id)
+                    raise IntervalDataTaskFailure(msg)
+
+                final_results['interval_utc_time'] = datetime.utcnow()
+                for attribute in attributes:
+                    final_results[attribute] = omci_msg['data'].get(attribute)
+
+            except TimeoutError as e:
+                self.log.warn('interval-get-timeout', e=e, class_id=self._class_id,
+                              entity_id=self._entity_id, attributes=attributes)
+                self.deferred.errback(failure.Failure(e))
+
+            except Exception as e:
+                self.log.exception('interval-get-failure', e=e, class_id=self._class_id)
+                self.deferred.errback(failure.Failure(e))
+
+        # Successful if here
+        self.deferred.callback(final_results)
diff --git a/python/extensions/omci/tasks/mib_reconcile_task.py b/python/extensions/omci/tasks/mib_reconcile_task.py
new file mode 100644
index 0000000..38e29dc
--- /dev/null
+++ b/python/extensions/omci/tasks/mib_reconcile_task.py
@@ -0,0 +1,693 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+from common.utils.asleep import asleep
+from voltha.extensions.omci.tasks.task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, failure, returnValue, TimeoutError
+from voltha.extensions.omci.omci_defs import *
+from voltha.extensions.omci.omci_me import OntDataFrame
+from voltha.extensions.omci.omci_frame import OmciFrame, OmciDelete, OmciCreate, OmciSet
+from voltha.extensions.omci.database.mib_db_api import ATTRIBUTES_KEY
+
+OP = EntityOperations
+RC = ReasonCodes
+AA = AttributeAccess
+
+
+class MibReconcileException(Exception):
+    pass
+
+
+class MibPartialSuccessException(Exception):
+    pass
+
+
+class MibReconcileTask(Task):
+    """
+    OpenOMCI MIB Reconcile Task
+
+    This task attempts to resynchronize the MIB. Note that it runs in exclusive
+    OMCI-CC mode so that it can query the current database/ONU to verify the
+    differences still exist before correcting them.
+    """
+    task_priority = 240
+    name = "MIB Reconcile Task"
+    max_sequential_db_updates = 5   # Be kind, rewind
+    db_update_pause = 0.05          # 50mS
+
+    def __init__(self, omci_agent, device_id, diffs):
+        """
+        Class initialization
+
+        :param omci_agent: (OpenOMCIAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        :param diffs: (dict) Dictionary of what was found to be invalid
+        """
+        super(MibReconcileTask, self).__init__(MibReconcileTask.name,
+                                               omci_agent,
+                                               device_id,
+                                               priority=MibReconcileTask.task_priority,
+                                               exclusive=False)
+        self._local_deferred = None
+        self._diffs = diffs
+        self._device = None
+        self._sync_sm = None
+        self._db_updates = 0    # For tracking sequential blocking consul/etcd updates
+
+    def cancel_deferred(self):
+        super(MibReconcileTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start MIB Reconcile task
+        """
+        super(MibReconcileTask, self).start()
+
+        self._device = self.omci_agent.get_device(self.device_id)
+
+        if self._device is None:
+            e = MibReconcileException('Device {} no longer exists'.format(self.device_id))
+            self.deferred.errback(failure.Failure(e))
+            return
+
+        self._sync_sm = self._device.mib_synchronizer
+
+        if self._device is None:
+            e = MibReconcileException('Device {} MIB State machine no longer exists'.format(self.device_id))
+            self.deferred.errback(failure.Failure(e))
+            return
+
+        self._local_deferred = reactor.callLater(0, self.perform_mib_reconcile)
+
+    def stop(self):
+        """
+        Shutdown MIB Reconcile task
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        self._device = None
+        super(MibReconcileTask, self).stop()
+
+    @inlineCallbacks
+    def perform_mib_reconcile(self):
+        """
+        Perform the MIB Reconciliation sequence.
+
+        The sequence to reconcile will be to clean up ONU only MEs, followed by
+        OLT/OpenOMCI-only MEs, and then finally correct common MEs with differing
+        attributes.
+        """
+        self.log.debug('perform-mib-reconcile')
+
+        try:
+            successes = 0
+            failures = 0
+
+            if self._diffs['onu-only'] is not None and len(self._diffs['onu-only']):
+                results = yield self.fix_onu_only(self._diffs['onu-only'],
+                                                  self._diffs['onu-db'])
+                self.log.debug('onu-only-results', good=results[0], bad=results[1])
+                successes += results[0]
+                failures += results[1]
+
+            if self._diffs['olt-only'] is not None and len(self._diffs['olt-only']):
+                results = yield self.fix_olt_only(self._diffs['olt-only'],
+                                                  self._diffs['onu-db'],
+                                                  self._diffs['olt-db'])
+                self.log.debug('olt-only-results', good=results[0], bad=results[1])
+                successes += results[0]
+                failures += results[1]
+
+            if self._diffs['attributes'] is not None and len(self._diffs['attributes']):
+                results = yield self.fix_attributes_only(self._diffs['attributes'],
+                                                         self._diffs['onu-db'],
+                                                         self._diffs['olt-db'])
+                self.log.debug('attributes-results', good=results[0], bad=results[1])
+                successes += results[0]
+                failures += results[1]
+
+            # Success? Update MIB-data-sync
+            if failures == 0:
+                results = yield self.update_mib_data_sync()
+                successes += results[0]
+                failures += results[1]
+
+            # Send back final status
+            if failures > 0:
+                msg = '{} Successful updates, {} failures'.format(successes, failure)
+                error = MibPartialSuccessException(msg) if successes \
+                    else MibReconcileException(msg)
+                self.deferred.errback(failure.Failure(error))
+            else:
+                self.deferred.callback('{} Successful updates'.format(successes))
+
+        except Exception as e:
+            if not self.deferred.called:
+                self.log.exception('reconcile', e=e)
+                self.deferred.errback(failure.Failure(e))
+
+    @inlineCallbacks
+    def fix_onu_only(self, onu, onu_db):
+        """
+        Fix ME's that were only found on the ONU. For ONU only MEs there are
+        the following things that will be checked.
+
+            o ME's that do not have an OpenOMCI class decoder. These are stored
+              as binary blobs in the MIB database. Since we do not ever set them
+              (since no encoder as well), just store them in the OLT/OpenOMCI MIB
+              Database.
+
+            o For ME's that are created by the ONU (no create/delete access), the
+              MEs 'may' be due to a firmware upgrade and reboot or in response to
+              an OLT creating another ME entity and then creating this ME.  Place
+              these 'new' into the database.
+
+            o For ME's that are created by the OLT/OpenOMCI, delete them from the
+              ONU
+
+        :param onu: (list(int,int)) List of tuples where (class_id, inst_id)
+        :param onu_db: (dict) ONU Database snapshot at time of audit
+
+        :return: (int, int) successes, failures
+        """
+        successes = 0
+        failures = 0
+        me_map = self._device.me_map
+
+        ####################################################################
+        # First the undecodables and onu-created (treated the same)
+        undecodable = self._undecodable(onu, me_map)
+        onu_created = self._onu_created(onu, me_map)
+
+        if len(undecodable) or len(onu_created):
+            results = yield self.fix_onu_only_save_to_db(undecodable, onu_created, onu_db)
+            successes += results[0]
+            failures += results[1]
+
+        ####################################################################
+        # Last the OLT created values, resend these to the ONU
+
+        olt_created = self._olt_created(onu, me_map)
+        if len(olt_created):
+            results = yield self.fix_onu_only_remove_from_onu(olt_created)
+            successes += results[0]
+            failures += results[1]
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def fix_onu_only_save_to_db(self, undecodable, onu_created, onu_db):
+        """
+        In ONU database and needs to be saved to OLT/OpenOMCI database.
+
+        Note that some, perhaps all, of these instances could be ONU create
+        in response to the OLT creating some other ME instance. So treat
+        the Database operation as a create.
+        """
+        successes = 0
+        failures = 0
+
+        for cid, eid in undecodable + onu_created:
+            if self.deferred.called:        # Check if task canceled
+                break
+            try:
+                # If in current MIB, had an audit issue or other MIB operation
+                # put it into the database, declare it a failure so we audit again
+                try:
+                    olt_entry = self._sync_sm.query_mib(class_id=cid, instance_id=eid)
+
+                except KeyError:        # Common for ONU created MEs during audit
+                    olt_entry = None
+
+                if olt_entry is not None and len(olt_entry):
+                    self.log.debug('onu-only-in-current', cid=cid, eid=eid)
+                    failures += 1     # Mark as failure so we audit again
+
+                elif cid not in onu_db:
+                    self.log.warn('onu-only-not-in-audit', cid=cid, eid=eid)
+                    failures += 1
+
+                else:
+                    entry = onu_db[cid][eid]
+                    self.strobe_watchdog()
+                    self._sync_sm.mib_set(cid, eid, entry[ATTRIBUTES_KEY])
+                    successes += 1
+
+                    # If we do nothing but DB updates for ALOT of MEs, we are
+                    # blocking other async twisted tasks, be kind and pause
+                    self._db_updates += 1
+
+                    if self._db_updates >= MibReconcileTask.max_sequential_db_updates:
+                        self._db_updates = 0
+                        self._local_deferred = yield asleep(MibReconcileTask.db_update_pause)
+
+            except Exception as e:
+                self.log.warn('onu-only-error', e=e)
+                failures += 1
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def fix_onu_only_remove_from_onu(self, olt_created,):
+        """ On ONU, but no longer on OLT/OpenOMCI, delete it """
+        successes = 0
+        failures = 0
+
+        for cid, eid in olt_created:
+            if self.deferred.called:        # Check if task canceled
+                break
+            try:
+                # If in current MIB, had an audit issue, declare it an error
+                # and next audit should clear it up
+                try:
+                    current_entry = self._sync_sm.query_mib(class_id=cid, instance_id=eid)
+
+                except KeyError:
+                    # Expected if no other entities with same class present in MIB
+                    current_entry = None
+
+                if current_entry is not None and len(current_entry):
+                    self.log.debug('onu-only-in-current', cid=cid, eid=eid)
+                    failures += 1
+
+                else:
+                    # Delete it from the ONU. Assume success
+                    frame = OmciFrame(transaction_id=None,
+                                      message_type=OmciDelete.message_id,
+                                      omci_message=OmciDelete(entity_class=cid, entity_id=eid))
+
+                    self._local_deferred = yield self._device.omci_cc.send(frame)
+                    self.check_status_and_state(self._local_deferred, 'onu-attribute-update')
+                    successes += 1
+                    self._db_updates = 0
+
+            except Exception as e:
+                self.log.warn('olt-only-error', e=e)
+                failures += 1
+                self.strobe_watchdog()
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def fix_olt_only(self, olt, onu_db, olt_db):
+        """
+        Fix ME's that were only found on the OLT. For OLT only MEs there are
+        the following things that will be checked.
+
+            o ME's that do not have an OpenOMCI class decoder. These are stored
+              as binary blobs in the MIB database. Since the OLT will never
+              create these (all are learned from ONU), it is assumed the ONU
+              has removed them for some purpose. So delete them from the OLT
+              database.
+
+            o For ME's that are created by the ONU (no create/delete access), the
+              MEs 'may' not be on the ONU because of a reboot or an OLT created
+              ME was deleted and the ONU gratuitously removes it.  So delete them
+              from the OLT database.
+
+            o For ME's that are created by the OLT/OpenOMCI, delete them from the
+              ONU
+
+        :param olt: (list(int,int)) List of tuples where (class_id, inst_id)
+        :param onu_db: (dict) ONU Database snapshot at time of audit
+        :param olt_db: (dict) OLT Database snapshot at time of audit
+
+        :return: (int, int) successes, failures
+        """
+        successes = 0
+        failures = 0
+        me_map = self._device.me_map
+
+        ####################################################################
+        # First the undecodables and onu-created (treated the same) remove
+        # from OpenOMCI database
+        undecodable = self._undecodable(olt, me_map)
+        onu_created = self._onu_created(olt, me_map)
+
+        if len(undecodable) or len(onu_created):
+            good, bad = self.fix_olt_only_remove_from_db(undecodable, onu_created)
+            successes += good
+            failures += bad
+
+        ####################################################################
+        # Last the OLT created
+
+        olt_created = self._olt_created(olt, me_map)
+        if len(olt_created):
+            results = yield self.fix_olt_only_create_on_onu(olt_created, me_map)
+            successes += results[0]
+            failures += results[1]
+
+        returnValue((successes, failures))
+
+    def fix_olt_only_remove_from_db(self, undecodable, onu_created):
+        """ On OLT, but not on ONU and are ONU created, delete from OLT/OpenOMCI DB """
+        successes = 0
+        failures = 0
+
+        for cid, eid in undecodable + onu_created:
+            if self.deferred.called:        # Check if task canceled
+                break
+            try:
+                # Delete it. If already deleted (KeyError), then that is okay
+                self._sync_sm.mib_delete(cid, eid)
+                self.strobe_watchdog()
+
+            except KeyError:
+                successes += 1      # Not found in DB anymore, assume success
+
+            except Exception as e:
+                self.log.warn('olt-only-db-error', cid=cid, eid=eid, e=e)
+                failures += 1
+
+        return successes, failures
+
+    @inlineCallbacks
+    def fix_olt_only_create_on_onu(self, olt_created, me_map):
+        """ Found on OLT and created by OLT, so create on ONU"""
+        successes = 0
+        failures = 0
+
+        for cid, eid in olt_created:
+            if self.deferred.called:        # Check if task canceled
+                break
+
+            try:
+                # Get current entry, use it if found
+                olt_entry = self._sync_sm.query_mib(class_id=cid, instance_id=eid)
+                me_entry = me_map[cid]
+
+                if olt_entry is None or len(olt_entry) == 0:
+                    successes += 1      # Deleted before task got to run
+                else:
+                    # Create it in the ONU. Only set-by-create attributes allowed
+                    sbc_data = {k: v for k, v in olt_entry[ATTRIBUTES_KEY].items()
+                                if AA.SetByCreate in
+                                next((attr.access for attr in me_entry.attributes
+                                      if attr.field.name == k), set())}
+
+                    frame = OmciFrame(transaction_id=None,
+                                      message_type=OmciCreate.message_id,
+                                      omci_message=OmciCreate(entity_class=cid,
+                                                              entity_id=eid,
+                                                              data=sbc_data))
+
+                    self._local_deferred = yield self._device.omci_cc.send(frame)
+                    self.check_status_and_state(self._local_deferred, 'olt-create-sbc')
+                    successes += 1
+                    self._db_updates = 0
+
+                    # Try any writeable attributes now (but not set-by-create)
+                    writeable_data = {k: v for k, v in olt_entry[ATTRIBUTES_KEY].items()
+                                      if AA.Writable in
+                                      next((attr.access for attr in me_entry.attributes
+                                            if attr.field.name == k), set())
+                                      and AA.SetByCreate not in
+                                      next((attr.access for attr in me_entry.attributes
+                                            if attr.field.name == k), set())}
+
+                    if len(writeable_data):
+                        attributes_mask = me_entry.mask_for(*writeable_data.keys())
+                        frame = OmciFrame(transaction_id=None,
+                                          message_type=OmciSet.message_id,
+                                          omci_message=OmciSet(entity_class=cid,
+                                                               entity_id=eid,
+                                                               attributes_mask=attributes_mask,
+                                                               data=writeable_data))
+
+                        self._local_deferred = yield self._device.omci_cc.send(frame)
+                        self.check_status_and_state(self._local_deferred, 'olt-set-writeable')
+                        successes += 1
+
+            except Exception as e:
+                self.log.exception('olt-only-fix', e=e, cid=cid, eid=eid)
+                failures += 1
+                self.strobe_watchdog()
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def fix_attributes_only(self, attrs, onu_db, olt_db):
+        """
+        Fix ME's that were found on both the ONU and OLT, but had differing
+        attribute values.  There are several cases to handle here
+
+            o For ME's created on the ONU that have write attributes that
+              only exist in the ONU's database, copy these to the OLT/OpenOMCI
+              database
+
+            o For all other writeable attributes, the OLT value takes precedence
+
+        :param attrs: (list(int,int,str)) List of tuples where (class_id, inst_id, attribute)
+                                          points to the specific ME instance where attributes
+                                          are different
+        :param onu_db: (dict) ONU Database snapshot at time of audit
+        :param olt_db: (dict) OLT Database snapshot at time of audit
+
+        :return: (int, int) successes, failures
+        """
+        successes = 0
+        failures = 0
+        me_map = self._device.me_map
+
+        # Collect up attributes on a per CID/EID basis.  This will result in
+        # the minimal number of operations to either the database of over
+        # the OMCI-CC to the ONU
+
+        attr_map = dict()
+        for cid, eid, attribute in attrs:
+            if (cid, eid) not in attr_map:
+                attr_map[(cid, eid)] = {attribute}
+            else:
+                attr_map[(cid, eid)].add(attribute)
+
+        for entity_pair, attributes in attr_map.items():
+            cid = entity_pair[0]
+            eid = entity_pair[1]
+
+            # Skip MEs we cannot encode/decode
+            if cid not in me_map:
+                self.log.warn('no-me-map-decoder', class_id=cid)
+                failures += 1
+                continue
+
+            if self.deferred.called:        # Check if task canceled
+                break
+
+            # Build up MIB set commands and ONU Set (via OMCI) commands
+            # based of the attributes
+            me_entry = me_map[cid]
+            mib_data_to_save = dict()
+            onu_data_to_set = dict()
+            olt_attributes = olt_db[cid][eid][ATTRIBUTES_KEY]
+            onu_attributes = onu_db[cid][eid][ATTRIBUTES_KEY]
+
+            for attribute in attributes:
+                map_access = next((attr.access for attr in me_entry.attributes
+                                   if attr.field.name == attribute), set())
+                writeable = AA.Writable in map_access or AA.SetByCreate in map_access
+
+                # If only in ONU database snapshot, save it to OLT
+                if attribute in onu_attributes and attribute not in olt_attributes:
+                    # On onu only
+                    mib_data_to_save[attribute] = onu_attributes[attribute]
+
+                elif writeable:
+                    # On olt only or in both. Either way OLT wins
+                    onu_data_to_set[attribute] = olt_attributes[attribute]
+
+            # Now do the bulk operations For both, check to see if the target
+            # is still the same as when the audit was performed. If it is, do
+            # the commit.  If not, mark as a failure so an expedited audit will
+            # occur and check again.
+
+            if len(mib_data_to_save):
+                results = yield self.fix_attributes_only_in_mib(cid, eid, mib_data_to_save)
+                successes += results[0]
+                failures += results[1]
+
+            if len(onu_data_to_set):
+                results = yield self.fix_attributes_only_on_olt(cid, eid, onu_data_to_set, olt_db, me_entry)
+                successes += results[0]
+                failures += results[1]
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def fix_attributes_only_in_mib(self, cid, eid, mib_data):
+        successes = 0
+        failures = 0
+        try:
+            # Get current and verify same as during audit it is missing from our DB
+            attributes = mib_data.keys()
+            current_entry = self._device.query_mib(cid, eid, attributes)
+
+            if current_entry is not None and len(current_entry):
+                clashes = {k: v for k, v in current_entry.items()
+                           if k in attributes and v != mib_data[k]}
+
+                if len(clashes):
+                    raise ValueError('Existing DB entry for {}/{} attributes clash with audit data. Clash: {}'.
+                                     format(cid, eid, clashes))
+
+            self._sync_sm.mib_set(cid, eid, mib_data)
+            successes += len(mib_data)
+            self.strobe_watchdog()
+
+            # If we do nothing but DB updates for ALOT of MEs, we are
+            # blocking other async twisted tasks, be kind and yield
+            self._db_updates += 1
+            if self._db_updates >= MibReconcileTask.max_sequential_db_updates:
+                self._db_updates = 0
+                self._local_deferred = yield asleep(MibReconcileTask.db_update_pause)
+
+        except ValueError as e:
+            self.log.debug('attribute-changed', e)
+            failures += len(mib_data)
+
+        except Exception as e:
+            self.log.exception('attribute-only-fix-mib', e=e, cid=cid, eid=eid)
+            failures += len(mib_data)
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def fix_attributes_only_on_olt(self, cid, eid, onu_data, olt_db, me_entry):
+        successes = 0
+        failures = 0
+
+        try:
+            # On olt only or in both. Either way OLT wins, first verify that
+            # the OLT version is still the same data that we want to
+            # update on the ONU. Verify the data for the OLT is the same as
+            # at time of audit
+            olt_db_entries = {k: v for k, v in olt_db[cid][eid][ATTRIBUTES_KEY].items()
+                              if k in onu_data.keys()}
+            current_entries = self._sync_sm.query_mib(class_id=cid, instance_id=eid,
+                                                      attributes=onu_data.keys())
+
+            still_the_same = all(current_entries.get(k) == v for k, v in olt_db_entries.items())
+            if not still_the_same:
+                returnValue((0, len(onu_data)))    # Wait for it to stabilize
+
+            # OLT data still matches, do the set operations now
+            # while len(onu_data):
+            attributes_mask = me_entry.mask_for(*onu_data.keys())
+            frame = OmciFrame(transaction_id=None,
+                              message_type=OmciSet.message_id,
+                              omci_message=OmciSet(entity_class=cid,
+                                                   entity_id=eid,
+                                                   attributes_mask=attributes_mask,
+                                                   data=onu_data))
+
+            results = yield self._device.omci_cc.send(frame)
+            self.check_status_and_state(results, 'onu-attribute-update')
+            successes += len(onu_data)
+            self._db_updates = 0
+
+        except Exception as e:
+            self.log.exception('attribute-only-fix-onu', e=e, cid=cid, eid=eid)
+            failures += len(onu_data)
+            self.strobe_watchdog()
+
+        returnValue((successes, failures))
+
+    @inlineCallbacks
+    def update_mib_data_sync(self):
+        """
+        As the final step of MIB resynchronization, the OLT sets the MIB data sync
+        attribute of the ONU data ME to some suitable value of its own choice. It
+        then sets its own record of the same attribute to the same value,
+        incremented by 1, as explained in clause
+
+        :return: (int, int) success, failure counts
+        """
+        # Get MDS to set, do not user zero
+
+        new_mds_value = self._sync_sm.mib_data_sync
+        if new_mds_value == 0:
+            self._sync_sm.increment_mib_data_sync()
+            new_mds_value = self._sync_sm.mib_data_sync
+
+        # Update it.  The set response will be sent on the OMCI-CC pub/sub bus
+        # and the MIB Synchronizer will update this MDS value in the database
+        # if successful.
+        try:
+            frame = OntDataFrame(mib_data_sync=new_mds_value).set()
+
+            results = yield self._device.omci_cc.send(frame)
+            self.check_status_and_state(results, 'ont-data-mbs-update')
+            returnValue((1, 0))
+
+        except TimeoutError as e:
+            self.log.debug('ont-data-send-timeout', e=e)
+            returnValue((0, 1))
+
+        except Exception as e:
+            self.log.exception('ont-data-send', e=e, mds=new_mds_value)
+            returnValue((0, 1))
+
+    def check_status_and_state(self, results, operation=''):
+        """
+        Check the results of an OMCI response.  An exception is thrown
+        if the task was cancelled or an error was detected.
+
+        :param results: (OmciFrame) OMCI Response frame
+        :param operation: (str) what operation was being performed
+        :return: True if successful, False if the entity existed (already created)
+        """
+        omci_msg = results.fields['omci_message'].fields
+        status = omci_msg['success_code']
+        error_mask = omci_msg.get('parameter_error_attributes_mask', 'n/a')
+        failed_mask = omci_msg.get('failed_attributes_mask', 'n/a')
+        unsupported_mask = omci_msg.get('unsupported_attributes_mask', 'n/a')
+        self.strobe_watchdog()
+
+        self.log.debug(operation, status=status, error_mask=error_mask,
+                       failed_mask=failed_mask, unsupported_mask=unsupported_mask)
+
+        if status == RC.Success:
+            return True
+
+        elif status == RC.InstanceExists:
+            return False
+
+        msg = '{} failed with a status of {}, error_mask: {}, failed_mask: {}, unsupported_mask: {}'.\
+            format(operation, status, error_mask, failed_mask, unsupported_mask)
+
+        raise MibReconcileException(msg)
+
+    def _undecodable(self, cid_eid_list, me_map):
+        return [(cid, eid) for cid, eid in cid_eid_list if cid not in me_map]
+
+    def _onu_created(self, cid_eid_list, me_map):
+        return [(cid, eid) for cid, eid in cid_eid_list if cid in me_map and
+                (OP.Create not in me_map[cid].mandatory_operations and
+                 OP.Create not in me_map[cid].optional_operations)]
+
+    def _olt_created(self, cid_eid_list, me_map):
+        return [(cid, eid) for cid, eid in cid_eid_list if cid in me_map and
+                (OP.Create in me_map[cid].mandatory_operations or
+                 OP.Create in me_map[cid].optional_operations)]
diff --git a/python/extensions/omci/tasks/mib_resync_task.py b/python/extensions/omci/tasks/mib_resync_task.py
new file mode 100644
index 0000000..ef9c531
--- /dev/null
+++ b/python/extensions/omci/tasks/mib_resync_task.py
@@ -0,0 +1,427 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure, returnValue
+from twisted.internet import reactor
+from common.utils.asleep import asleep
+from voltha.extensions.omci.database.mib_db_dict import *
+from voltha.extensions.omci.omci_entities import OntData
+from voltha.extensions.omci.omci_defs import AttributeAccess, EntityOperations
+
+AA = AttributeAccess
+OP = EntityOperations
+
+class MibCopyException(Exception):
+    pass
+
+
+class MibDownloadException(Exception):
+    pass
+
+
+class MibResyncException(Exception):
+    pass
+
+
+class MibResyncTask(Task):
+    """
+    OpenOMCI MIB resynchronization Task
+
+    This task should get a copy of the MIB and compare compare it to a
+    copy of the database. When the MIB Upload command is sent to the ONU,
+    it should make a copy and source the data requested from this database.
+    The ONU can still source AVC's and the the OLT can still send config
+    commands to the actual.
+    """
+    task_priority = 240
+    name = "MIB Resynchronization Task"
+
+    max_db_copy_retries = 3
+    db_copy_retry_delay = 7
+
+    max_mib_upload_next_retries = 3
+    mib_upload_next_delay = 10          # Max * delay < 60 seconds
+    watchdog_timeout = 15               # Should be > max delay
+
+    def __init__(self, omci_agent, device_id):
+        """
+        Class initialization
+
+        :param omci_agent: (OpenOMCIAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        """
+        super(MibResyncTask, self).__init__(MibResyncTask.name,
+                                            omci_agent,
+                                            device_id,
+                                            priority=MibResyncTask.task_priority,
+                                            exclusive=False)
+        self._local_deferred = None
+        self._device = omci_agent.get_device(device_id)
+        self._db_active = MibDbVolatileDict(omci_agent)
+        self._db_active.start()
+
+    def cancel_deferred(self):
+        super(MibResyncTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start MIB Re-Synchronization task
+        """
+        super(MibResyncTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_mib_resync)
+        self._db_active.start()
+        self._db_active.add(self.device_id)
+
+    def stop(self):
+        """
+        Shutdown MIB Re-Synchronization task
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        self._device = None
+        self._db_active.stop()
+        self._db_active = None
+        super(MibResyncTask, self).stop()
+
+    @inlineCallbacks
+    def perform_mib_resync(self):
+        """
+        Perform the MIB Resynchronization sequence
+
+        The sequence to be performed is:
+            - get a copy of the current MIB database (db_copy)
+
+            - perform MIB upload commands to get ONU's database and save this
+              to a local DB (db_active). Note that the ONU can still receive
+              create/delete/set/get operations from the operator and source
+              AVC notifications as well during this period.
+
+            - Compare the information in the db_copy to the db_active
+
+        During the mib upload process, the maximum time between mib upload next
+        requests is 1 minute.
+        """
+        self.log.debug('perform-mib-resync')
+
+        try:
+            results = yield self.snapshot_mib()
+            db_copy = results[0]
+
+            if db_copy is None:
+                e = MibCopyException('Failed to get local database copy')
+                self.deferred.errback(failure.Failure(e))
+
+            else:
+                number_of_commands = results[1]
+
+                # Start the MIB upload sequence
+                self.strobe_watchdog()
+                commands_retrieved = yield self.upload_mib(number_of_commands)
+
+                if commands_retrieved < number_of_commands:
+                    e = MibDownloadException('Only retrieved {} of {} instances'.
+                                             format(commands_retrieved, number_of_commands))
+                    self.deferred.errback(failure.Failure(e))
+                else:
+                    # Compare the databases
+                    active_copy = self._db_active.query(self.device_id)
+                    on_olt_only, on_onu_only, attr_diffs = \
+                        self.compare_mibs(db_copy, active_copy)
+
+                    self.deferred.callback(
+                            {
+                                'on-olt-only': on_olt_only if len(on_olt_only) else None,
+                                'on-onu-only': on_onu_only if len(on_onu_only) else None,
+                                'attr-diffs': attr_diffs if len(attr_diffs) else None,
+                                'olt-db': db_copy,
+                                'onu-db': active_copy
+                            })
+
+        except Exception as e:
+            self.log.exception('resync', e=e)
+            self.deferred.errback(failure.Failure(e))
+
+    @inlineCallbacks
+    def snapshot_mib(self):
+        """
+        Snapshot the MIB on the ONU and create a copy of our local MIB database
+
+        :return: (pair) (db_copy, number_of_commands)
+        """
+        db_copy = None
+        number_of_commands = None
+
+        try:
+            max_tries = MibResyncTask.max_db_copy_retries - 1
+
+            for retries in xrange(0, max_tries + 1):
+                # Send MIB Upload so ONU snapshots its MIB
+                try:
+                    self.strobe_watchdog()
+                    number_of_commands = yield self.send_mib_upload()
+
+                    if number_of_commands is None:
+                        if retries >= max_tries:
+                            db_copy = None
+                            break
+
+                except (TimeoutError, ValueError) as e:
+                    self.log.warn('timeout-or-value-error', e=e)
+                    if retries >= max_tries:
+                        raise
+
+                    self.strobe_watchdog()
+                    yield asleep(MibResyncTask.db_copy_retry_delay)
+                    continue
+
+                # Get a snapshot of the local MIB database
+                db_copy = self._device.query_mib()
+                # if we made it this far, no need to keep trying
+                break
+
+        except Exception as e:
+            self.log.exception('mib-resync', e=e)
+            raise
+
+        # Handle initial failures
+
+        if db_copy is None or number_of_commands is None:
+            raise MibCopyException('Failed to snapshot MIB copy after {} retries'.
+                                   format(MibResyncTask.max_db_copy_retries))
+
+        returnValue((db_copy, number_of_commands))
+
+    @inlineCallbacks
+    def send_mib_upload(self):
+        """
+        Perform MIB upload command and get the number of entries to retrieve
+
+        :return: (int) Number of commands to execute or None on error
+        """
+        ########################################
+        # Begin MIB Upload
+        try:
+            self.strobe_watchdog()
+            results = yield self._device.omci_cc.send_mib_upload()
+
+            number_of_commands = results.fields['omci_message'].fields['number_of_commands']
+
+            if number_of_commands is None or number_of_commands <= 0:
+                raise ValueError('Number of commands was {}'.format(number_of_commands))
+
+            returnValue(number_of_commands)
+
+        except TimeoutError as e:
+            self.log.warn('mib-resync-get-timeout', e=e)
+            raise
+
+    @inlineCallbacks
+    def upload_mib(self, number_of_commands):
+        ########################################
+        # Begin MIB Upload
+        seq_no = None
+
+        for seq_no in xrange(number_of_commands):
+            max_tries = MibResyncTask.max_mib_upload_next_retries
+
+            for retries in xrange(0, max_tries):
+                try:
+                    self.strobe_watchdog()
+                    response = yield self._device.omci_cc.send_mib_upload_next(seq_no)
+
+                    omci_msg = response.fields['omci_message'].fields
+                    class_id = omci_msg['object_entity_class']
+                    entity_id = omci_msg['object_entity_id']
+
+                    # Filter out the 'mib_data_sync' from the database. We save that at
+                    # the device level and do not want it showing up during a re-sync
+                    # during data comparison
+                    from binascii import hexlify
+                    if class_id == OntData.class_id:
+                        break
+
+                    # The T&W ONU reports an ME with class ID 0 but only on audit. Perhaps others do as well.
+                    if class_id == 0 or class_id > 0xFFFF:
+                        self.log.warn('invalid-class-id', class_id=class_id)
+                        break
+
+                    attributes = {k: v for k, v in omci_msg['object_data'].items()}
+
+                    # Save to the database
+                    self._db_active.set(self.device_id, class_id, entity_id, attributes)
+                    break
+
+                except TimeoutError:
+                    self.log.warn('mib-resync-timeout', seq_no=seq_no,
+                                  number_of_commands=number_of_commands)
+
+                    if retries < max_tries - 1:
+                        self.strobe_watchdog()
+                        yield asleep(MibResyncTask.mib_upload_next_delay)
+                    else:
+                        raise
+
+                except Exception as e:
+                    self.log.exception('resync', e=e, seq_no=seq_no,
+                                       number_of_commands=number_of_commands)
+
+        returnValue(seq_no + 1)     # seq_no is zero based.
+
+    def compare_mibs(self, db_copy, db_active):
+        """
+        Compare the our db_copy with the ONU's active copy
+
+        :param db_copy: (dict) OpenOMCI's copy of the database
+        :param db_active: (dict) ONU's database snapshot
+        :return: (dict), (dict), (list)  Differences
+        """
+        self.strobe_watchdog()
+        me_map = self.omci_agent.get_device(self.device_id).me_map
+
+        # Class & Entities only in local copy (OpenOMCI)
+        on_olt_temp = self.get_lhs_only_dict(db_copy, db_active)
+
+        # Remove any entries that are not reported during an upload (but could
+        # be in our database copy. Retain undecodable class IDs.
+        on_olt_only = [(cid, eid) for cid, eid in on_olt_temp
+                       if cid not in me_map or not me_map[cid].hidden]
+
+        # Further reduce the on_olt_only MEs reported in an audit to not
+        # include missed MEs that are ONU created. Not all ONUs report MEs
+        # that are ONU created unless we are doing the initial MIB upload.
+        # Adtran does report them, T&W may not as well as a few others
+        on_olt_only = [(cid, eid) for cid, eid in on_olt_only if cid in me_map and
+                       (OP.Create in me_map[cid].mandatory_operations or
+                        OP.Create in me_map[cid].optional_operations)]
+
+        # Class & Entities only on remote (ONU)
+        on_onu_only = self.get_lhs_only_dict(db_active, db_copy)
+
+        # Class & Entities on both local & remote, but one or more attributes
+        # are different on the ONU.  This is the value that the local (OpenOMCI)
+        # thinks should be on the remote (ONU)
+
+        attr_diffs = self.get_attribute_diffs(db_copy, db_active, me_map)
+
+        # TODO: Note that certain MEs are excluded from the MIB upload.  In particular,
+        #       instances of some general purpose MEs, such as the Managed Entity ME and
+        #       and the Attribute ME are not included in the MIB upload.  Also all table
+        #       attributes are not included in the MIB upload (but we do not yet support
+        #       tables in this OpenOMCI implementation (VOLTHA v1.3.0)
+
+        return on_olt_only, on_onu_only, attr_diffs
+
+    def get_lhs_only_dict(self, lhs, rhs):
+        """
+        Compare two MIB database dictionaries and return the ME Class ID and
+        instances that are unique to the lhs dictionary. Both parameters
+        should be in the common MIB Database output dictionary format that
+        is returned by the mib 'query' command.
+
+        :param lhs: (dict) Left-hand-side argument.
+        :param rhs: (dict) Right-hand-side argument
+
+        return: (list(int,int)) List of tuples where (class_id, inst_id)
+        """
+        results = list()
+
+        for cls_id, cls_data in lhs.items():
+            # Get unique classes
+            #
+            # Skip keys that are not class IDs
+            if not isinstance(cls_id, int):
+                continue
+
+            if cls_id not in rhs:
+                results.extend([(cls_id, inst_id) for inst_id in cls_data.keys()
+                                if isinstance(inst_id, int)])
+            else:
+                # Get unique instances of a class
+                lhs_cls = cls_data
+                rhs_cls = rhs[cls_id]
+
+                for inst_id, _ in lhs_cls.items():
+                    # Skip keys that are not instance IDs
+                    if isinstance(cls_id, int) and inst_id not in rhs_cls:
+                        results.extend([(cls_id, inst_id)])
+
+        return results
+
+    def get_attribute_diffs(self, omci_copy, onu_copy, me_map):
+        """
+        Compare two OMCI MIBs and return the ME class and instance IDs that exists
+        on both the local copy and the remote ONU that have different attribute
+        values. Both parameters should be in the common MIB Database output
+        dictionary format that is returned by the mib 'query' command.
+
+        :param omci_copy: (dict) OpenOMCI copy (OLT-side) of the MIB Database
+        :param onu_copy: (dict) active ONU latest copy its database
+        :param me_map: (dict) ME Class ID MAP for this ONU
+
+        return: (list(int,int,str)) List of tuples where (class_id, inst_id, attribute)
+                                    points to the specific ME instance where attributes
+                                    are different
+        """
+        results = list()
+        ro_set = {AA.R}
+
+        # Get class ID's that are in both
+        class_ids = {cls_id for cls_id, _ in omci_copy.items()
+                     if isinstance(cls_id, int) and cls_id in onu_copy}
+
+        for cls_id in class_ids:
+            # Get unique instances of a class
+            olt_cls = omci_copy[cls_id]
+            onu_cls = onu_copy[cls_id]
+
+            # Weed out read-only attributes. Attributes on onu may be read-only. These
+            # will only show up it the OpenOMCI (OLT-side) database if it changed and
+            # an AVC Notification was sourced by the ONU
+            # TODO: These class IDs could be calculated once at ONU startup (at device add)
+            if cls_id in me_map:
+                ro_attrs = {attr.field.name for attr in me_map[cls_id].attributes
+                            if attr.access == ro_set}
+            else:
+                # Here if partially defined ME (not defined in ME Map)
+                from voltha.extensions.omci.omci_cc import UNKNOWN_CLASS_ATTRIBUTE_KEY
+                ro_attrs = {UNKNOWN_CLASS_ATTRIBUTE_KEY}
+
+            # Get set of common instance IDs
+            inst_ids = {inst_id for inst_id, _ in olt_cls.items()
+                        if isinstance(inst_id, int) and inst_id in onu_cls}
+
+            for inst_id in inst_ids:
+                omci_attributes = {k for k in olt_cls[inst_id][ATTRIBUTES_KEY].iterkeys()}
+                onu_attributes = {k for k in onu_cls[inst_id][ATTRIBUTES_KEY].iterkeys()}
+
+                # Get attributes that exist in one database, but not the other
+                sym_diffs = (omci_attributes ^ onu_attributes) - ro_attrs
+                results.extend([(cls_id, inst_id, attr) for attr in sym_diffs])
+
+                # Get common attributes with different values
+                common_attributes = (omci_attributes & onu_attributes) - ro_attrs
+                results.extend([(cls_id, inst_id, attr) for attr in common_attributes
+                               if olt_cls[inst_id][ATTRIBUTES_KEY][attr] !=
+                                onu_cls[inst_id][ATTRIBUTES_KEY][attr]])
+        return results
diff --git a/python/extensions/omci/tasks/mib_upload.py b/python/extensions/omci/tasks/mib_upload.py
new file mode 100644
index 0000000..4afd234
--- /dev/null
+++ b/python/extensions/omci/tasks/mib_upload.py
@@ -0,0 +1,158 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure, AlreadyCalledError
+from twisted.internet import reactor
+from voltha.extensions.omci.omci_defs import ReasonCodes
+
+
+class MibUploadFailure(Exception):
+    """
+    This error is raised by default when the upload fails
+    """
+
+
+class MibUploadTask(Task):
+    """
+    OpenOMCI MIB upload task
+
+    On successful completion, this task will call the 'callback' method of the
+    deferred returned by the start method. Only a textual message is provided as
+    the successful results and it lists the number of ME entities successfully
+    retrieved.
+
+    Note that the MIB Synchronization State Machine will get event subscription
+    information for the MIB Reset and MIB Upload Next requests and it is the
+    MIB Synchronization State Machine that actually populates the MIB Database.
+    """
+    task_priority = 250
+    name = "MIB Upload Task"
+
+    def __init__(self, omci_agent, device_id):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        """
+        super(MibUploadTask, self).__init__(MibUploadTask.name,
+                                            omci_agent,
+                                            device_id,
+                                            priority=MibUploadTask.task_priority)
+        self._local_deferred = None
+
+    def cancel_deferred(self):
+        super(MibUploadTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start MIB Synchronization tasks
+        """
+        super(MibUploadTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_mib_upload)
+
+    def stop(self):
+        """
+        Shutdown MIB Synchronization tasks
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        super(MibUploadTask, self).stop()
+
+    @inlineCallbacks
+    def perform_mib_upload(self):
+        """
+        Perform the MIB Upload sequence
+        """
+        self.log.debug('perform-mib-upload')
+
+        seq_no = 0
+        number_of_commands = 0
+
+        try:
+            device = self.omci_agent.get_device(self.device_id)
+
+            #########################################
+            # MIB Reset
+            self.strobe_watchdog()
+            results = yield device.omci_cc.send_mib_reset()
+
+            status = results.fields['omci_message'].fields['success_code']
+            if status != ReasonCodes.Success.value:
+                raise MibUploadFailure('MIB Reset request failed with status code: {}'.
+                                       format(status))
+
+            ########################################
+            # Begin MIB Upload
+            self.strobe_watchdog()
+            results = yield device.omci_cc.send_mib_upload()
+
+            number_of_commands = results.fields['omci_message'].fields['number_of_commands']
+
+            for seq_no in xrange(number_of_commands):
+                if not device.active or not device.omci_cc.enabled:
+                    raise MibUploadFailure('OMCI and/or ONU is not active')
+
+                for retry in range(0, 3):
+                    try:
+                        self.log.debug('mib-upload-next-request', seq_no=seq_no,
+                                       retry=retry,
+                                       number_of_commands=number_of_commands)
+                        self.strobe_watchdog()
+                        yield device.omci_cc.send_mib_upload_next(seq_no)
+
+                        self.log.debug('mib-upload-next-success', seq_no=seq_no,
+                                       number_of_commands=number_of_commands)
+                        break
+
+                    except TimeoutError as e:
+                        from common.utils.asleep import asleep
+                        self.log.warn('mib-upload-timeout', e=e, seq_no=seq_no,
+                                      number_of_commands=number_of_commands)
+                        if retry >= 2:
+                            raise MibUploadFailure('Upload timeout failure on req {} of {}'.
+                                                   format(seq_no + 1, number_of_commands))
+                        self.strobe_watchdog()
+                        yield asleep(0.3)
+
+            # Successful if here
+            self.log.info('mib-synchronized')
+            self.deferred.callback('success, loaded {} ME Instances'.
+                                   format(number_of_commands))
+
+        except TimeoutError as e:
+            self.log.warn('mib-upload-timeout-on-reset', e=e, seq_no=seq_no,
+                          number_of_commands=number_of_commands)
+            self.deferred.errback(failure.Failure(e))
+
+        except AlreadyCalledError:
+            # Can occur if task canceled due to MIB Sync state change
+            self.log.debug('already-called-exception', seq_no=seq_no,
+                           number_of_commands=number_of_commands)
+            assert self.deferred.called, \
+                'Unexpected AlreadyCalledError exception: seq: {} of {}'.format(seq_no,
+                                                                                number_of_commands)
+        except Exception as e:
+            self.log.exception('mib-upload', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/omci_create_pm_task.py b/python/extensions/omci/tasks/omci_create_pm_task.py
new file mode 100644
index 0000000..355e26a
--- /dev/null
+++ b/python/extensions/omci/tasks/omci_create_pm_task.py
@@ -0,0 +1,150 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, failure, TimeoutError
+from voltha.extensions.omci.omci_defs import ReasonCodes, EntityOperations
+from voltha.extensions.omci.omci_frame import OmciFrame
+from voltha.extensions.omci.omci_messages import OmciCreate
+
+RC = ReasonCodes
+OP = EntityOperations
+
+
+class CreatePMException(Exception):
+    pass
+
+
+class OmciCreatePMRequest(Task):
+    """
+    OpenOMCI routine to create the requested PM Interval MEs
+
+    TODO: Support of thresholding crossing alarms will be in a future VOLTHA release
+    """
+    task_priority = Task.DEFAULT_PRIORITY
+    name = "ONU OMCI Create PM ME Task"
+
+    def __init__(self, omci_agent, device_id, me_dict, exclusive=False):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param me_dict: (dict) (pm cid, pm eid) -> (me cid, me eid, upstream)
+        :param exclusive: (bool) True if this Create request Task exclusively own the
+                                 OMCI-CC while running. Default: False
+        """
+        super(OmciCreatePMRequest, self).__init__(OmciCreatePMRequest.name,
+                                                  omci_agent,
+                                                  device_id,
+                                                  priority=OmciCreatePMRequest.task_priority,
+                                                  exclusive=exclusive)
+        self._device = omci_agent.get_device(device_id)
+        self._me_dict = me_dict
+        self._local_deferred = None
+
+    def cancel_deferred(self):
+        super(OmciCreatePMRequest, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """ Start task """
+        super(OmciCreatePMRequest, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_create)
+
+    @inlineCallbacks
+    def perform_create(self):
+        """ Perform the create requests """
+
+        try:
+            for pm, me in self._me_dict.items():
+                pm_class_id = pm[0]
+                pm_entity_id = pm[1]
+                me_class_id = me[0]
+                me_entity_id = me[1]
+                upstream = me[2]
+                self.log.debug('create-pm-me', class_id=pm_class_id, entity_id=pm_entity_id)
+
+                if me_class_id == 0:
+                    # Typical/common PM interval format
+                    frame = OmciFrame(
+                        transaction_id=None,  # OMCI-CC will set
+                        message_type=OmciCreate.message_id,
+                        omci_message=OmciCreate(
+                            entity_class=pm_class_id,
+                            entity_id=pm_entity_id,
+                            data=dict()
+                        )
+                    )
+                else:
+                    # Extended PM interval format. See ITU-T G.988 Section 9.3.32.
+                    #    Bit 1 - continuous accumulation if set, 15-minute interval if unset
+                    #    Bit 2 - directionality (0=upstream, 1=downstream)
+                    #    Bit 3..14 - Reserved
+                    #    Bit 15 - Use P bits of TCI field to filter
+                    #    Bit 16 - Use VID bits of TCI field to filter
+                    bitmap = 0 if upstream else 1 << 1
+
+                    data = {'control_block': [
+                        0,             # Threshold data 1/2 ID
+                        me_class_id,   # Parent ME Class
+                        me_entity_id,  # Parent ME Instance
+                        0,             # Accumulation disable
+                        0,             # TCA Disable
+                        bitmap,        # Control fields bitmap
+                        0,             # TCI
+                        0              # Reserved
+                    ]}
+                    frame = OmciFrame(
+                        transaction_id=None,  # OMCI-CC will set
+                        message_type=OmciCreate.message_id,
+                        omci_message=OmciCreate(
+                            entity_class=pm_class_id,
+                            entity_id=pm_entity_id,
+                            data=data
+                        )
+                    )
+                self.strobe_watchdog()
+                try:
+                    results = yield self._device.omci_cc.send(frame)
+                except TimeoutError:
+                    self.log.warning('perform-create-timeout', me_class_id=me_class_id, me_entity_id=me_entity_id,
+                                     pm_class_id=pm_class_id, pm_entity_id=pm_entity_id)
+                    raise
+
+                status = results.fields['omci_message'].fields['success_code']
+                self.log.debug('perform-create-status', status=status)
+
+                # Did it fail
+                if status != RC.Success.value and status != RC.InstanceExists.value:
+                    msg = 'ME: {}, entity: {} failed with status {}'.format(pm_class_id,
+                                                                            pm_entity_id,
+                                                                            status)
+                    raise CreatePMException(msg)
+
+                self.log.debug('create-pm-success', class_id=pm_class_id,
+                               entity_id=pm_entity_id)
+
+            self.deferred.callback(self)
+
+        except Exception as e:
+            self.log.exception('perform-create', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/omci_delete_pm_task.py b/python/extensions/omci/tasks/omci_delete_pm_task.py
new file mode 100644
index 0000000..adf1ce2
--- /dev/null
+++ b/python/extensions/omci/tasks/omci_delete_pm_task.py
@@ -0,0 +1,108 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, failure
+from voltha.extensions.omci.omci_defs import ReasonCodes, EntityOperations
+from voltha.extensions.omci.omci_frame import OmciFrame
+from voltha.extensions.omci.omci_messages import OmciDelete
+
+RC = ReasonCodes
+OP = EntityOperations
+
+
+class DeletePMException(Exception):
+    pass
+
+
+class OmciDeletePMRequest(Task):
+    """
+    OpenOMCI routine to delete the requested PM Interval MEs
+    """
+    task_priority = Task.DEFAULT_PRIORITY
+    name = "ONU OMCI Delete PM ME Task"
+
+    def __init__(self, omci_agent, device_id, me_set, exclusive=False):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param me_set: (set) Tuples of class_id / entity_id to create
+        :param exclusive: (bool) True if this Create request Task exclusively own the
+                                 OMCI-CC while running. Default: False
+        """
+        super(OmciDeletePMRequest, self).__init__(OmciDeletePMRequest.name,
+                                                  omci_agent,
+                                                  device_id,
+                                                  priority=OmciDeletePMRequest.task_priority,
+                                                  exclusive=exclusive)
+        self._device = omci_agent.get_device(device_id)
+        self._me_tuples = me_set
+        self._local_deferred = None
+
+    def cancel_deferred(self):
+        super(OmciDeletePMRequest, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """ Start task """
+        super(OmciDeletePMRequest, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_delete)
+
+    @inlineCallbacks
+    def perform_delete(self):
+        """ Perform the delete requests """
+        self.log.debug('perform-delete')
+
+        try:
+            for me in self._me_tuples:
+                class_id = me[0]
+                entity_id = me[1]
+
+                frame = OmciFrame(
+                    transaction_id=None,
+                    message_type=OmciDelete.message_id,
+                    omci_message=OmciDelete(
+                        entity_class=class_id,
+                        entity_id=entity_id
+                    )
+                )
+                self.strobe_watchdog()
+                results = yield self._device.omci_cc.send(frame)
+
+                status = results.fields['omci_message'].fields['success_code']
+                self.log.debug('perform-delete-status', status=status)
+
+                # Did it fail, it instance does not exist, not an error
+                if status != RC.Success.value and status != RC.UnknownInstance.value:
+                    msg = 'ME: {}, entity: {} failed with status {}'.format(class_id,
+                                                                            entity_id,
+                                                                            status)
+                    raise DeletePMException(msg)
+
+                self.log.debug('delete-pm-success', class_id=class_id,
+                               entity_id=entity_id)
+            self.deferred.callback(self)
+
+        except Exception as e:
+            self.log.exception('perform-create', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/omci_get_request.py b/python/extensions/omci/tasks/omci_get_request.py
new file mode 100644
index 0000000..690df1c
--- /dev/null
+++ b/python/extensions/omci/tasks/omci_get_request.py
@@ -0,0 +1,356 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import failure, inlineCallbacks, TimeoutError, returnValue
+from voltha.extensions.omci.omci_defs import ReasonCodes, EntityOperations
+from voltha.extensions.omci.omci_me import MEFrame
+from voltha.extensions.omci.omci_frame import OmciFrame
+from voltha.extensions.omci.omci_cc import DEFAULT_OMCI_TIMEOUT
+from voltha.extensions.omci.omci_messages import OmciGet
+from voltha.extensions.omci.omci_fields import OmciTableField
+
+RC = ReasonCodes
+OP = EntityOperations
+
+
+class GetException(Exception):
+    pass
+
+
+class OmciGetRequest(Task):
+    """
+    OpenOMCI Get an OMCI ME Instance Attributes
+
+    Upon completion, the Task deferred callback is invoked with a reference of
+    this Task object.
+
+    The Task has an initializer option (allow_failure) that will retry all
+    requested attributes if the original request fails with a status code of
+    9 (Attributes failed or unknown). This result means that an attribute
+    is not supported by the ONU or that a mandatory/optional attribute could
+    not be executed by the ONU, even if it is supported, for example,
+    because of a range or type violation.
+    """
+    task_priority = 128
+    name = "ONU OMCI Get Task"
+
+    def __init__(self, omci_agent, device_id, entity_class, entity_id, attributes,
+                 exclusive=True, allow_failure=False):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        :param entity_class: (EntityClass) ME Class to retrieve
+        :param entity_id: (int) ME Class instance ID to retrieve
+        :param attributes: (list or set) Name of attributes to retrieve
+        :param exclusive: (bool) True if this GET request Task exclusively own the
+                                 OMCI-CC while running. Default: True
+        :param allow_failure: (bool) If true, attempt to get all valid attributes
+                                     if the original request receives an error
+                                     code of 9 (Attributes failed or unknown).
+        """
+        super(OmciGetRequest, self).__init__(OmciGetRequest.name,
+                                             omci_agent,
+                                             device_id,
+                                             priority=OmciGetRequest.task_priority,
+                                             exclusive=exclusive)
+        self._device = omci_agent.get_device(device_id)
+        self._entity_class = entity_class
+        self._entity_id = entity_id
+        self._attributes = attributes
+        self._allow_failure = allow_failure
+        self._failed_or_unknown_attributes = set()
+        self._results = None
+        self._local_deferred = None
+
+    def cancel_deferred(self):
+        super(OmciGetRequest, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    @property
+    def me_class(self):
+        """The OMCI Managed Entity Class associated with this request"""
+        return self._entity_class
+
+    @property
+    def entity_id(self):
+        """The ME Entity ID associated with this request"""
+        return self._entity_id
+
+    @property
+    def attributes(self):
+        """
+        Return a dictionary of attributes for the request if the Get was
+        successfully completed.  None otherwise
+        """
+        if self._results is None:
+            return None
+
+        omci_msg = self._results.fields['omci_message'].fields
+        return omci_msg['data'] if 'data' in omci_msg else None
+
+    @property
+    def success_code(self):
+        """
+        Return the OMCI success/reason code for the Get Response.
+        """
+        if self._results is None:
+            return None
+
+        return self._results.fields['omci_message'].fields['success_code']
+
+    @property
+    def raw_results(self):
+        """
+        Return the raw Get Response OMCIFrame
+        """
+        return self._results
+
+    def start(self):
+        """
+        Start MIB Capabilities task
+        """
+        super(OmciGetRequest, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_get_omci)
+
+    @property
+    def failed_or_unknown_attributes(self):
+        """
+        Returns a set attributes that failed or unknown in the original get
+        request that resulted in an initial status code of 9 (Attributes
+        failed or unknown).
+
+        :return: (set of str) attributes
+        """
+        return self._failed_or_unknown_attributes
+
+    @inlineCallbacks
+    def perform_get_omci(self):
+        """
+        Perform the initial get request
+        """
+        self.log.info('perform-get', entity_class=self._entity_class,
+                      entity_id=self._entity_id, attributes=self._attributes)
+        try:
+            # If one or more attributes is a table attribute, get it separately
+            def is_table_attr(attr):
+                index = self._entity_class.attribute_name_to_index_map[attr]
+                attr_def = self._entity_class.attributes[index]
+                return isinstance(attr_def.field, OmciTableField)
+
+            first_attributes = {attr for attr in self._attributes if not is_table_attr(attr)}
+            table_attributes = {attr for attr in self._attributes if is_table_attr(attr)}
+
+            frame = MEFrame(self._entity_class, self._entity_id, first_attributes).get()
+            self.strobe_watchdog()
+            results = yield self._device.omci_cc.send(frame)
+
+            status = results.fields['omci_message'].fields['success_code']
+            self.log.debug('perform-get-status', status=status)
+
+            # Success?
+            if status == RC.Success.value:
+                self._results = results
+                results_omci = results.fields['omci_message'].fields
+
+                # Were all attributes fetched?
+                missing_attr = frame.fields['omci_message'].fields['attributes_mask'] ^ \
+                    results_omci['attributes_mask']
+
+                if missing_attr > 0 or len(table_attributes) > 0:
+                    self.log.info('perform-get-missing', num_missing=missing_attr,
+                                  table_attr=table_attributes)
+                    self.strobe_watchdog()
+                    self._local_deferred = reactor.callLater(0,
+                                                             self.perform_get_missing_attributes,
+                                                             missing_attr,
+                                                             table_attributes)
+                    returnValue(self._local_deferred)
+
+            elif status == RC.AttributeFailure.value:
+                # What failed?  Note if only one attribute was attempted, then
+                # that is an overall failure
+
+                if not self._allow_failure or len(self._attributes) <= 1:
+                    raise GetException('Get failed with status code: {}'.
+                                       format(RC.AttributeFailure.value))
+
+                self.strobe_watchdog()
+                self._local_deferred = reactor.callLater(0,
+                                                         self.perform_get_failed_attributes,
+                                                         results,
+                                                         self._attributes)
+                returnValue(self._local_deferred)
+
+            else:
+                raise GetException('Get failed with status code: {}'.format(status))
+
+            self.log.debug('get-completed')
+            self.deferred.callback(self)
+
+        except TimeoutError as e:
+            self.deferred.errback(failure.Failure(e))
+
+        except Exception as e:
+            self.log.exception('perform-get', e=e, class_id=self._entity_class,
+                               entity_id=self._entity_id, attributes=self._attributes)
+            self.deferred.errback(failure.Failure(e))
+
+    @inlineCallbacks
+    def perform_get_missing_attributes(self, missing_attr, table_attributes):
+        """
+        This method is called when the original Get requests completes with success
+        but not all attributes were returned.  This can happen if one or more of the
+        attributes would have exceeded the space available in the OMCI frame.
+
+        This routine iterates through the missing attributes and attempts to retrieve
+        the ones that were missing.
+
+        :param missing_attr: (int) Missing attributes bitmask
+        :param table_attributes: (set) Attributes that need table get/get-next support
+        """
+        self.log.debug('perform-get-missing', attrs=missing_attr, tbl=table_attributes)
+
+        # Retrieve missing attributes first (if any)
+        results_omci = self._results.fields['omci_message'].fields
+
+        for index in xrange(16):
+            attr_mask = 1 << index
+
+            if attr_mask & missing_attr:
+                # Get this attribute
+                frame = OmciFrame(
+                    transaction_id=None,  # OMCI-CC will set
+                    message_type=OmciGet.message_id,
+                    omci_message=OmciGet(
+                        entity_class=self._entity_class.class_id,
+                        entity_id=self._entity_id,
+                        attributes_mask=attr_mask
+                    )
+                )
+                try:
+                    self.strobe_watchdog()
+                    get_results = yield self._device.omci_cc.send(frame)
+
+                    get_omci = get_results.fields['omci_message'].fields
+                    if get_omci['success_code'] != RC.Success.value:
+                        continue
+
+                    assert attr_mask == get_omci['attributes_mask'], 'wrong attribute'
+                    results_omci['attributes_mask'] |= attr_mask
+
+                    if results_omci.get('data') is None:
+                        results_omci['data'] = dict()
+
+                    results_omci['data'].update(get_omci['data'])
+
+                except TimeoutError:
+                    self.log.debug('missing-timeout')
+
+                except Exception as e:
+                    self.log.exception('missing-failure', e=e)
+
+        # Now any table attributes. OMCI_CC handles background get/get-next sequencing
+        for tbl_attr in table_attributes:
+            attr_mask = self._entity_class.mask_for(tbl_attr)
+            frame = OmciFrame(
+                    transaction_id=None,  # OMCI-CC will set
+                    message_type=OmciGet.message_id,
+                    omci_message=OmciGet(
+                            entity_class=self._entity_class.class_id,
+                            entity_id=self._entity_id,
+                            attributes_mask=attr_mask
+                    )
+            )
+            try:
+                timeout = 2 * DEFAULT_OMCI_TIMEOUT  # Multiple frames expected
+                self.strobe_watchdog()
+                get_results = yield self._device.omci_cc.send(frame,
+                                                              timeout=timeout)
+                self.strobe_watchdog()
+                get_omci = get_results.fields['omci_message'].fields
+                if get_omci['success_code'] != RC.Success.value:
+                    continue
+
+                if results_omci.get('data') is None:
+                    results_omci['data'] = dict()
+
+                results_omci['data'].update(get_omci['data'])
+
+            except TimeoutError:
+                self.log.debug('tbl-attr-timeout')
+
+            except Exception as e:
+                self.log.exception('tbl-attr-timeout', e=e)
+
+        self.deferred.callback(self)
+
+    @inlineCallbacks
+    def perform_get_failed_attributes(self, tmp_results, attributes):
+        """
+
+        :param tmp_results:
+        :param attributes:
+        :return:
+        """
+        self.log.debug('perform-get-failed', attrs=attributes)
+
+        for attr in attributes:
+            try:
+                frame = MEFrame(self._entity_class, self._entity_id, {attr}).get()
+
+                self.strobe_watchdog()
+                results = yield self._device.omci_cc.send(frame)
+
+                status = results.fields['omci_message'].fields['success_code']
+
+                if status == RC.AttributeFailure.value:
+                    self.log.debug('unknown-or-invalid-attribute', attr=attr, status=status)
+                    self._failed_or_unknown_attributes.add(attr)
+
+                elif status != RC.Success.value:
+                    self.log.warn('invalid-get', class_id=self._entity_class,
+                                  attribute=attr, status=status)
+                    self._failed_or_unknown_attributes.add(attr)
+
+                else:
+                    # Add to partial results and correct the status
+                    tmp_results.fields['omci_message'].fields['success_code'] = status
+                    tmp_results.fields['omci_message'].fields['attributes_mask'] |= \
+                        results.fields['omci_message'].fields['attributes_mask']
+
+                    if tmp_results.fields['omci_message'].fields.get('data') is None:
+                        tmp_results.fields['omci_message'].fields['data'] = dict()
+
+                    tmp_results.fields['omci_message'].fields['data'][attr] = \
+                        results.fields['omci_message'].fields['data'][attr]
+
+            except TimeoutError as e:
+                self.log.debug('attr-timeout')
+
+            except Exception as e:
+                self.log.exception('attr-failure', e=e)
+
+        self._results = tmp_results
+        self.deferred.callback(self)
diff --git a/python/extensions/omci/tasks/omci_modify_request.py b/python/extensions/omci/tasks/omci_modify_request.py
new file mode 100644
index 0000000..da7bff5
--- /dev/null
+++ b/python/extensions/omci/tasks/omci_modify_request.py
@@ -0,0 +1,171 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, failure, returnValue
+from voltha.extensions.omci.omci_defs import ReasonCodes, EntityOperations
+from voltha.extensions.omci.omci_me import MEFrame
+from voltha.extensions.omci.omci_frame import OmciFrame
+from voltha.extensions.omci.omci_messages import OmciCreate, OmciSet, OmciDelete
+from voltha.extensions.omci.omci_entities import EntityClass
+
+RC = ReasonCodes
+OP = EntityOperations
+
+
+class ModifyException(Exception):
+    pass
+
+
+class OmciModifyRequest(Task):
+    """
+    OpenOMCI Generic Create, Set, or Delete Frame support Task.
+
+    This task allows an ONU to send a Create, Set, or Delete request from any point in their
+    code while properly using the OMCI-CC channel.  Direct access to the OMCI-CC object
+    to send requests by an ONU is highly discouraged.
+    """
+    task_priority = 128
+    name = "ONU OMCI Modify Task"
+
+    def __init__(self, omci_agent, device_id, frame, priority=task_priority, exclusive=False):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        :param frame: (OmciFrame) Frame to send
+        :param priority: (int) OpenOMCI Task priority (0..255) 255 is the highest
+        :param exclusive: (bool) True if this GET request Task exclusively own the
+                                 OMCI-CC while running. Default: False
+        """
+        super(OmciModifyRequest, self).__init__(OmciModifyRequest.name,
+                                                omci_agent,
+                                                device_id,
+                                                priority=priority,
+                                                exclusive=exclusive)
+        self._device = omci_agent.get_device(device_id)
+        self._frame = frame
+        self._results = None
+        self._local_deferred = None
+
+        # Validate message type
+        self._msg_type = frame.fields['message_type']
+        if self._msg_type not in (OmciCreate.message_id, OmciSet.message_id, OmciDelete.message_id):
+            raise TypeError('Invalid Message type: {}, must be Create, Set, or Delete'.
+                            format(self._msg_type))
+
+    def cancel_deferred(self):
+        super(OmciModifyRequest, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    @property
+    def success_code(self):
+        """
+        Return the OMCI success/reason code for the Get Response.
+        """
+        if self._results is None:
+            return None
+
+        return self._results.fields['omci_message'].fields['success_code']
+
+    @property
+    def illegal_attributes_mask(self):
+        """
+        For Create & Set requests, a failure may indicate that one or more
+        attributes have an illegal value.  This property returns any illegal
+        attributes
+
+        :return: None if not a create/set request, otherwise the attribute mask
+                 of illegal attributes
+        """
+        if self._results is None:
+            return None
+
+        omci_msg = self._results.fields['omci_message'].fields
+
+        if self._msg_type == OmciCreate.message_id:
+            if self.success_code != RC.ParameterError:
+                return 0
+            return omci_msg['parameter_error_attributes_mask']
+
+        elif self._msg_type == OmciSet.message_id:
+            if self.success_code != RC.AttributeFailure:
+                return 0
+            return omci_msg['failed_attributes_mask']
+
+        return None
+
+    @property
+    def unsupported_attributes_mask(self):
+        """
+        For Set requests, a failure may indicate that one or more attributes
+        are not supported by this ONU. This property returns any those unsupported attributes
+
+        :return: None if not a set request, otherwise the attribute mask of any illegal
+                 parameters
+        """
+        if self._msg_type != OmciSet.message_id or self._results is None:
+            return None
+
+        if self.success_code != RC.AttributeFailure:
+            return 0
+
+        return self._results.fields['omci_message'].fields['unsupported_attributes_mask']
+
+    @property
+    def raw_results(self):
+        """
+        Return the raw Response OMCIFrame
+        """
+        return self._results
+
+    def start(self):
+        """
+        Start MIB Capabilities task
+        """
+        super(OmciModifyRequest, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_omci)
+
+    @inlineCallbacks
+    def perform_omci(self):
+        """
+        Perform the request
+        """
+        self.log.debug('perform-request')
+
+        try:
+            self.strobe_watchdog()
+            self._results = yield self._device.omci_cc.send(self._frame)
+
+            status = self._results.fields['omci_message'].fields['success_code']
+            self.log.debug('response-status', status=status)
+
+            # Success?
+            if status in (RC.Success.value, RC.InstanceExists):
+                self.deferred.callback(self)
+            else:
+                raise ModifyException('Failed with status {}'.format(status))
+
+        except Exception as e:
+            self.log.exception('perform-modify', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/omci_sw_image_upgrade_task.py b/python/extensions/omci/tasks/omci_sw_image_upgrade_task.py
new file mode 100644
index 0000000..5eaa87c
--- /dev/null
+++ b/python/extensions/omci/tasks/omci_sw_image_upgrade_task.py
@@ -0,0 +1,64 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+import structlog
+from task import Task
+from twisted.internet import reactor
+from voltha.protos.voltha_pb2 import ImageDownload
+
+class OmciSwImageUpgradeTask(Task):
+    name = "OMCI Software Image Upgrade Task"
+
+
+    def __init__(self, img_id, omci_upgrade_sm_cls, omci_agent, image_download, clock=None):
+        super(OmciSwImageUpgradeTask, self).__init__(OmciSwImageUpgradeTask.name, omci_agent, image_download.id,
+                                                     exclusive=False,
+                                                     watchdog_timeout=45)
+        self.log.debug("OmciSwImageUpgradeTask create ", image_id=img_id)
+        self._image_id = img_id
+        self._omci_upgrade_sm_cls = omci_upgrade_sm_cls
+        # self._omci_agent = omci_agent
+        self._image_download = image_download
+        self.reactor = clock if clock is not None else reactor
+        self._omci_upgrade_sm = None
+        self.log.debug("OmciSwImageUpgradeTask create end", image_id=img_id)
+
+    @property 
+    def status(self):
+        return self._image_download
+        
+    def start(self):
+        self.log.debug("OmciSwImageUpgradeTask start")
+        super(OmciSwImageUpgradeTask, self).start()
+        if self._omci_upgrade_sm is None:
+            self._omci_upgrade_sm = self._omci_upgrade_sm_cls(self._image_id, self.omci_agent, self._image_download, clock=self.reactor)
+            d = self._omci_upgrade_sm.start()
+            d.chainDeferred(self.deferred)
+        #else:
+        #    if restart:
+        #        self._omci_upgrade_sm.reset_image()
+
+    def stop(self):
+        self.log.debug("OmciSwImageUpgradeTask stop")
+        if self._omci_upgrade_sm is not None:
+            self._omci_upgrade_sm.stop()
+            self._omci_upgrade_sm = None
+    
+    def onu_bootup(self):
+        self.log.debug("onu_bootup", state=self._omci_upgrade_sm.status.image_state);
+        if self._omci_upgrade_sm is not None \
+            and self._omci_upgrade_sm.status.image_state == ImageDownload.IMAGE_ACTIVATE:
+            self._omci_upgrade_sm.do_commit()
+    
diff --git a/python/extensions/omci/tasks/onu_capabilities_task.py b/python/extensions/omci/tasks/onu_capabilities_task.py
new file mode 100644
index 0000000..048382c
--- /dev/null
+++ b/python/extensions/omci/tasks/onu_capabilities_task.py
@@ -0,0 +1,282 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from binascii import hexlify
+from twisted.internet.defer import inlineCallbacks, failure, returnValue
+from twisted.internet import reactor
+from voltha.extensions.omci.omci_defs import ReasonCodes
+from voltha.extensions.omci.omci_me import OmciFrame
+from voltha.extensions.omci.omci import EntityOperations
+
+
+class GetNextException(Exception):
+    pass
+
+
+class GetCapabilitiesFailure(Exception):
+    pass
+
+
+class OnuCapabilitiesTask(Task):
+    """
+    OpenOMCI MIB Capabilities Task
+
+    This task requests information on supported MEs via the OMCI (ME#287)
+    Managed entity.
+
+    This task should be ran after MIB Synchronization and before any MIB
+    Downloads to the ONU.
+
+    Upon completion, the Task deferred callback is invoked with dictionary
+    containing the supported managed entities and message types.
+
+    results = {
+                'supported-managed-entities': {set of supported managed entities},
+                'supported-message-types': {set of supported message types}
+              }
+    """
+    task_priority = 240
+    name = "ONU Capabilities Task"
+
+    max_mib_get_next_retries = 3
+    mib_get_next_delay = 5
+    DEFAULT_OCTETS_PER_MESSAGE = 29
+
+    def __init__(self, omci_agent, device_id, omci_pdu_size=DEFAULT_OCTETS_PER_MESSAGE):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        :param omci_pdu_size: (int) OMCI Data payload size (not counting any trailers)
+        """
+        super(OnuCapabilitiesTask, self).__init__(OnuCapabilitiesTask.name,
+                                                  omci_agent,
+                                                  device_id,
+                                                  priority=OnuCapabilitiesTask.task_priority)
+        self._local_deferred = None
+        self._device = omci_agent.get_device(device_id)
+        self._pdu_size = omci_pdu_size
+        self._supported_entities = set()
+        self._supported_msg_types = set()
+
+    def cancel_deferred(self):
+        super(OnuCapabilitiesTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    @property
+    def supported_managed_entities(self):
+        """
+        Return a set of the Managed Entity class IDs supported on this ONU
+
+        None is returned if no MEs have been discovered
+
+        :return: (set of ints)
+        """
+        return frozenset(self._supported_entities) if len(self._supported_entities) else None
+
+    @property
+    def supported_message_types(self):
+        """
+        Return a set of the Message Types supported on this ONU
+
+        None is returned if no message types have been discovered
+
+        :return: (set of EntityOperations)
+        """
+        return frozenset(self._supported_msg_types) if len(self._supported_msg_types) else None
+
+    def start(self):
+        """
+        Start MIB Capabilities task
+        """
+        super(OnuCapabilitiesTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_get_capabilities)
+
+    def stop(self):
+        """
+        Shutdown MIB Capabilities task
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        self._device = None
+        super(OnuCapabilitiesTask, self).stop()
+
+    @inlineCallbacks
+    def perform_get_capabilities(self):
+        """
+        Perform the MIB Capabilities sequence.
+
+        The sequence is to perform a Get request with the attribute mask equal
+        to 'me_type_table'.  The response to this request will carry the size
+        of (number of get-next sequences).
+
+        Then a loop is entered and get-next commands are sent for each sequence
+        requested.
+        """
+        self.log.debug('perform-get')
+
+        try:
+            self.strobe_watchdog()
+            self._supported_entities = yield self.get_supported_entities()
+
+            self.strobe_watchdog()
+            self._supported_msg_types = yield self.get_supported_message_types()
+
+            self.log.debug('get-success',
+                           supported_entities=self.supported_managed_entities,
+                           supported_msg_types=self.supported_message_types)
+            results = {
+                'supported-managed-entities': self.supported_managed_entities,
+                'supported-message-types': self.supported_message_types
+            }
+            self.deferred.callback(results)
+
+        except Exception as e:
+            self.log.exception('perform-get', e=e)
+            self.deferred.errback(failure.Failure(e))
+
+    def get_count_from_data_buffer(self, data):
+        """
+        Extract the 4 octet buffer length from the OMCI PDU contents
+        """
+        self.log.debug('get-count-buffer', data=hexlify(data))
+        return int(hexlify(data[:4]), 16)
+
+    @inlineCallbacks
+    def get_supported_entities(self):
+        """
+        Get the supported ME Types for this ONU.
+        """
+        try:
+            # Get the number of requests needed
+            frame = OmciFrame(me_type_table=True).get()
+            self.strobe_watchdog()
+            results = yield self._device.omci_cc.send(frame)
+
+            omci_msg = results.fields['omci_message']
+            status = omci_msg.fields['success_code']
+
+            if status != ReasonCodes.Success.value:
+                raise GetCapabilitiesFailure('Get count of supported entities failed with status code: {}'.
+                                             format(status))
+            data = omci_msg.fields['data']['me_type_table']
+            count = self.get_count_from_data_buffer(bytearray(data))
+
+            seq_no = 0
+            data_buffer = bytearray(0)
+            self.log.debug('me-type-count', octets=count, data=hexlify(data))
+
+            # Start the loop
+            for offset in xrange(0, count, self._pdu_size):
+                frame = OmciFrame(me_type_table=seq_no).get_next()
+                seq_no += 1
+                self.strobe_watchdog()
+                results = yield self._device.omci_cc.send(frame)
+
+                omci_msg = results.fields['omci_message']
+                status = omci_msg.fields['success_code']
+
+                if status != ReasonCodes.Success.value:
+                    raise GetCapabilitiesFailure(
+                        'Get supported entities request at offset {} of {} failed with status code: {}'.
+                        format(offset + 1, count, status))
+
+                # Extract the data
+                num_octets = count - offset
+                if num_octets > self._pdu_size:
+                    num_octets = self._pdu_size
+
+                data = omci_msg.fields['data']['me_type_table']
+                data_buffer += bytearray(data[:num_octets])
+
+            me_types = {(data_buffer[x] << 8) + data_buffer[x + 1]
+                        for x in xrange(0, len(data_buffer), 2)}
+            returnValue(me_types)
+
+        except Exception as e:
+            self.log.exception('get-entities', e=e)
+            self.deferred.errback(failure.Failure(e))
+
+    @inlineCallbacks
+    def get_supported_message_types(self):
+        """
+        Get the supported Message Types (actions) for this ONU.
+        """
+        try:
+            # Get the number of requests needed
+            frame = OmciFrame(message_type_table=True).get()
+            self.strobe_watchdog()
+            results = yield self._device.omci_cc.send(frame)
+
+            omci_msg = results.fields['omci_message']
+            status = omci_msg.fields['success_code']
+
+            if status != ReasonCodes.Success.value:
+                raise GetCapabilitiesFailure('Get count of supported msg types failed with status code: {}'.
+                                             format(status))
+
+            data = omci_msg.fields['data']['message_type_table']
+            count = self.get_count_from_data_buffer(bytearray(data))
+
+            seq_no = 0
+            data_buffer = list()
+            self.log.debug('me-type-count', octets=count, data=hexlify(data))
+
+            # Start the loop
+            for offset in xrange(0, count, self._pdu_size):
+                frame = OmciFrame(message_type_table=seq_no).get_next()
+                seq_no += 1
+                self.strobe_watchdog()
+                results = yield self._device.omci_cc.send(frame)
+
+                omci_msg = results.fields['omci_message']
+                status = omci_msg.fields['success_code']
+
+                if status != ReasonCodes.Success.value:
+                    raise GetCapabilitiesFailure(
+                        'Get supported msg types request at offset {} of {} failed with status code: {}'.
+                        format(offset + 1, count, status))
+
+                # Extract the data
+                num_octets = count - offset
+                if num_octets > self._pdu_size:
+                    num_octets = self._pdu_size
+
+                data = omci_msg.fields['data']['message_type_table']
+                data_buffer += data[:num_octets]
+
+            def buffer_to_message_type(value):
+                """
+                Convert an integer value to the appropriate EntityOperations enumeration
+                :param value: (int) Message type value (4..29)
+                :return: (EntityOperations) Enumeration, None on failure
+                """
+                next((v for k, v in EntityOperations.__members__.items() if v.value == value), None)
+
+            msg_types = {buffer_to_message_type(v) for v in data_buffer if v is not None}
+            returnValue({msg_type for msg_type in msg_types if msg_type is not None})
+
+        except Exception as e:
+            self.log.exception('get-msg-types', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/reboot_task.py b/python/extensions/omci/tasks/reboot_task.py
new file mode 100644
index 0000000..316e23b
--- /dev/null
+++ b/python/extensions/omci/tasks/reboot_task.py
@@ -0,0 +1,125 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from enum import IntEnum
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, failure, TimeoutError
+from voltha.extensions.omci.omci_defs import ReasonCodes, EntityOperations
+from voltha.extensions.omci.omci_me import OntGFrame
+from voltha.extensions.omci.omci_cc import DEFAULT_OMCI_TIMEOUT
+
+RC = ReasonCodes
+OP = EntityOperations
+
+
+class RebootException(Exception):
+    pass
+
+
+class DeviceBusy(Exception):
+    pass
+
+
+class RebootFlags(IntEnum):
+    Reboot_Unconditionally = 0,
+    Reboot_If_No_POTS_VoIP_In_Progress = 1,
+    Reboot_If_No_Emergency_Call_In_Progress = 2
+
+
+class OmciRebootRequest(Task):
+    """
+    OpenOMCI routine to request reboot of an ONU
+    """
+    task_priority = Task.MAX_PRIORITY
+    name = "ONU OMCI Reboot Task"
+    # adopt the global default
+    DEFAULT_REBOOT_TIMEOUT = DEFAULT_OMCI_TIMEOUT
+
+    def __init__(self, omci_agent, device_id,
+                 flags=RebootFlags.Reboot_Unconditionally,
+                 timeout=DEFAULT_REBOOT_TIMEOUT):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param flags: (RebootFlags) Reboot condition
+        """
+        super(OmciRebootRequest, self).__init__(OmciRebootRequest.name,
+                                                omci_agent,
+                                                device_id,
+                                                priority=OmciRebootRequest.task_priority,
+                                                exclusive=True)
+        self._device = omci_agent.get_device(device_id)
+        self._flags = flags
+        self._timeout = timeout
+        self._local_deferred = None
+
+    def cancel_deferred(self):
+        super(OmciRebootRequest, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """ Start task """
+        super(OmciRebootRequest, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_reboot)
+
+    @inlineCallbacks
+    def perform_reboot(self):
+        """
+        Perform the reboot requests
+
+        Depending on the ONU implementation, a response may not be returned. For this
+        reason, a timeout is considered successful.
+        """
+        self.log.info('perform-reboot')
+
+        try:
+            frame = OntGFrame().reboot(reboot_code=self._flags)
+            self.strobe_watchdog()
+            results = yield self._device.omci_cc.send(frame, timeout=self._timeout)
+
+            status = results.fields['omci_message'].fields['success_code']
+            self.log.debug('reboot-status', status=status)
+
+            # Did it fail
+            if status != RC.Success.value:
+                if self._flags != RebootFlags.Reboot_Unconditionally and\
+                        status == RC.DeviceBusy.value:
+                    raise DeviceBusy('ONU is busy, try again later')
+                else:
+                    msg = 'Reboot request failed with status {}'.format(status)
+                    raise RebootException(msg)
+
+            self.log.info('reboot-success')
+            self.deferred.callback(self)
+
+        except TimeoutError:
+            self.log.info('timeout', msg='Request timeout is not considered an error')
+            self.deferred.callback(None)
+
+        except DeviceBusy as e:
+            self.log.warn('perform-reboot', msg=e)
+            self.deferred.errback(failure.Failure(e))
+
+        except Exception as e:
+            self.log.exception('perform-reboot', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/sync_time_task.py b/python/extensions/omci/tasks/sync_time_task.py
new file mode 100644
index 0000000..b5b1dc9
--- /dev/null
+++ b/python/extensions/omci/tasks/sync_time_task.py
@@ -0,0 +1,107 @@
+#
+# Copyright 2018 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+from task import Task
+from twisted.internet import reactor
+from twisted.internet.defer import inlineCallbacks, TimeoutError, failure
+from voltha.extensions.omci.omci_me import OntGFrame
+from voltha.extensions.omci.omci_defs import ReasonCodes as RC
+from datetime import datetime
+
+
+class SyncTimeTask(Task):
+    """
+    OpenOMCI - Synchronize the ONU time with server
+    """
+    task_priority = Task.DEFAULT_PRIORITY + 10
+    name = "Sync Time Task"
+
+    def __init__(self, omci_agent, device_id, use_utc=True):
+        """
+        Class initialization
+
+        :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent
+        :param device_id: (str) ONU Device ID
+        :param use_utc: (bool) Use UTC time if True, otherwise local time
+        """
+        super(SyncTimeTask, self).__init__(SyncTimeTask.name,
+                                           omci_agent,
+                                           device_id,
+                                           priority=SyncTimeTask.task_priority,
+                                           exclusive=False)
+        self._local_deferred = None
+        self._use_utc = use_utc
+
+    def cancel_deferred(self):
+        super(SyncTimeTask, self).cancel_deferred()
+
+        d, self._local_deferred = self._local_deferred, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def start(self):
+        """
+        Start the tasks
+        """
+        super(SyncTimeTask, self).start()
+        self._local_deferred = reactor.callLater(0, self.perform_sync_time)
+
+    def stop(self):
+        """
+        Shutdown the tasks
+        """
+        self.log.debug('stopping')
+
+        self.cancel_deferred()
+        super(SyncTimeTask, self).stop()
+
+    @inlineCallbacks
+    def perform_sync_time(self):
+        """
+        Sync the time
+        """
+        self.log.debug('perform-sync-time')
+
+        try:
+            device = self.omci_agent.get_device(self.device_id)
+
+            #########################################
+            # ONT-G (ME #256)
+            dt = datetime.utcnow() if self._use_utc else datetime.now()
+
+            results = yield device.omci_cc.send(OntGFrame().synchronize_time(dt))
+
+            omci_msg = results.fields['omci_message'].fields
+            status = omci_msg['success_code']
+            self.log.debug('sync-time', status=status)
+
+            if status == RC.Success:
+                self.log.info('sync-time', success_info=omci_msg['success_info'] & 0x0f)
+
+            assert status == RC.Success, 'Unexpected Response Status: {}'.format(status)
+
+            # Successful if here
+            self.deferred.callback(results)
+
+        except TimeoutError as e:
+            self.log.warn('sync-time-timeout', e=e)
+            self.deferred.errback(failure.Failure(e))
+
+        except Exception as e:
+            self.log.exception('sync-time', e=e)
+            self.deferred.errback(failure.Failure(e))
diff --git a/python/extensions/omci/tasks/task.py b/python/extensions/omci/tasks/task.py
new file mode 100644
index 0000000..36020c0
--- /dev/null
+++ b/python/extensions/omci/tasks/task.py
@@ -0,0 +1,188 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+import structlog
+from twisted.internet import defer, reactor
+from twisted.internet.defer import failure
+
+
+class WatchdogTimeoutFailure(Exception):
+    """Task callback/errback not called properly before watchdog expiration"""
+    pass
+
+
+class Task(object):
+    """
+    OpenOMCI Base Task implementation
+
+    An OMCI task can be one or more OMCI requests, comparisons, or whatever
+    is needed to do a specific unit of work that needs to be ran to completion
+    successfully.
+
+    On successful completion, the task should called the 'callback' method of
+    the deferred and pass back whatever is meaningful to the user/state-machine
+    that launched it.
+
+    On failure, the 'errback' routine should be called with an appropriate
+    Failure object.
+    """
+    DEFAULT_PRIORITY = 128
+    MIN_PRIORITY = 0
+    MAX_PRIORITY = 255
+    DEFAULT_WATCHDOG_SECS = 10          # 10 seconds
+    MIN_WATCHDOG_SECS = 3               # 3 seconds
+    MAX_WATCHDOG_SECS = 60              # 60 seconds
+
+    _next_task_id = 0
+
+    def __init__(self, name, omci_agent, device_id, priority=DEFAULT_PRIORITY,
+                 exclusive=True, watchdog_timeout=DEFAULT_WATCHDOG_SECS):
+        """
+        Class initialization
+
+        :param name: (str) Task Name
+        :param device_id: (str) ONU Device ID
+        :param priority: (int) Task priority (0..255) 255 Highest
+        :param exclusive: (bool) If True, this task needs exclusive access to the
+                                 OMCI Communications channel when it runs
+        :param watchdog_timeout (int or float) Watchdog timeout (seconds) after task start, to
+                                run longer, periodically call 'strobe_watchdog()' to reschedule.
+        """
+        assert Task.MIN_PRIORITY <= priority <= Task.MAX_PRIORITY, \
+            'Priority should be {}..{}'.format(Task.MIN_PRIORITY, Task.MAX_PRIORITY)
+
+        assert Task.MIN_WATCHDOG_SECS <= watchdog_timeout <= Task.MAX_WATCHDOG_SECS, \
+            'Watchdog timeout should be {}..{} seconds'
+
+        Task._next_task_id += 1
+        self._task_id = Task._next_task_id
+        self.log = structlog.get_logger(device_id=device_id, name=name,
+                                        task_id=self._task_id)
+        self.name = name
+        self.device_id = device_id
+        self.omci_agent = omci_agent
+        self._running = False
+        self._exclusive = exclusive
+        self._deferred = defer.Deferred()       # Fires upon completion
+        self._watchdog = None
+        self._watchdog_timeout = watchdog_timeout
+        self._priority = priority
+
+    def __str__(self):
+        return 'Task: {}, ID:{}, Priority: {}, Exclusive: {}, Watchdog: {}'.format(
+            self.name, self.task_id, self.priority, self.exclusive, self.watchdog_timeout)
+
+    @property
+    def priority(self):
+        return self._priority
+
+    @property
+    def task_id(self):
+        return self._task_id
+
+    @property
+    def exclusive(self):
+        return self._exclusive
+
+    @property
+    def watchdog_timeout(self):
+        return self._watchdog_timeout
+
+    @property
+    def deferred(self):
+        return self._deferred
+
+    @property
+    def running(self):
+        # Is the Task running?
+        #
+        # Can be useful for tasks that use inline callbacks to detect
+        # if the task has been canceled.
+        #
+        return self._running
+
+    def cancel_deferred(self):
+        d1, self._deferred = self._deferred, None
+        d2, self._watchdog = self._watchdog, None
+
+        for d in [d1, d2]:
+            try:
+                if d is not None and not d.called:
+                    d.cancel()
+            except:
+                pass
+
+    def start(self):
+        """
+        Start task operations
+        """
+        self.log.debug('starting')
+        assert self._deferred is not None and not self._deferred.called, \
+            'Cannot re-use the same task'
+        self._running = True
+        self.strobe_watchdog()
+
+    def stop(self):
+        """
+        Stop task synchronization
+        """
+        self.log.debug('stopping')
+        self._running = False
+        self.cancel_deferred()
+        self.omci_agent = None      # Should only start/stop once
+
+    def task_cleanup(self):
+        """
+        This method should only be called from the TaskRunner's callback/errback
+        that is added when the task is initially queued. It is responsible for
+        clearing of the 'running' flag and canceling of the watchdog time
+        """
+        self._running = False
+        d, self._watchdog = self._watchdog, None
+        try:
+            if d is not None and not d.called:
+                d.cancel()
+        except:
+            pass
+
+    def strobe_watchdog(self):
+        """
+        Signal that we have not hung/deadlocked
+        """
+        # Create if first time (called at Task start)
+
+        def watchdog_timeout():
+            # Task may have hung (blocked) or failed to call proper success/error
+            # completion callback/errback
+            if not self.deferred.called:
+                err_msg = 'Task {}:{} watchdog timeout'.format(self.name, self.task_id)
+                self.log.error("task-watchdog-timeout", running=self.running,
+                               timeout=self.watchdog_timeout, error=err_msg)
+
+                self.deferred.errback(failure.Failure(WatchdogTimeoutFailure(err_msg)))
+                self.deferred.cancel()
+
+        if self._watchdog is not None:
+            if self._watchdog.called:
+                # Too late, timeout failure in progress
+                self.log.warn('task-watchdog-tripped', running=self.running,
+                              timeout=self.watchdog_timeout)
+                return
+
+            d, self._watchdog = self._watchdog, None
+            d.cancel()
+
+        # Schedule/re-schedule the watchdog timer
+        self._watchdog = reactor.callLater(self.watchdog_timeout, watchdog_timeout)
diff --git a/python/extensions/omci/tasks/task_runner.py b/python/extensions/omci/tasks/task_runner.py
new file mode 100644
index 0000000..eb7a252
--- /dev/null
+++ b/python/extensions/omci/tasks/task_runner.py
@@ -0,0 +1,285 @@
+#
+# Copyright 2017 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+import structlog
+from twisted.internet import reactor
+
+
+class TaskRunner(object):
+    """
+    Control the number of running tasks utilizing the OMCI Communications
+    channel (OMCI_CC
+    """
+    def __init__(self, device_id, clock=None):
+        self.log = structlog.get_logger(device_id=device_id)
+        self._pending_queue = dict()   # task-priority -> [tasks]
+        self._running_queue = dict()   # task-id -> task
+        self._active = False
+
+        self._successful_tasks = 0
+        self._failed_tasks = 0
+        self._watchdog_timeouts = 0
+        self._last_watchdog_failure_task = ''
+        self.reactor = clock if clock is not None else reactor
+
+    def __str__(self):
+        return 'TaskRunner: Pending: {}, Running:{}'.format(self.pending_tasks,
+                                                            self.running_tasks)
+
+    @property
+    def active(self):
+        return self._active
+
+    @property
+    def pending_tasks(self):
+        """
+        Get the number of tasks pending to run
+        """
+        count = 0
+        for tasks in self._pending_queue.itervalues():
+            count += len(tasks)
+        return count
+
+    @property
+    def running_tasks(self):
+        """
+        Get the number of tasks currently running
+        """
+        return len(self._running_queue)
+
+    @property
+    def successful_tasks_completed(self):
+        return self._successful_tasks
+
+    @property
+    def failed_tasks(self):
+        return self._failed_tasks
+
+    @property
+    def watchdog_timeouts(self):
+        return self._watchdog_timeouts
+
+    @property
+    def last_watchdog_failure_task(self):
+        """ Task name of last tasks to fail due to watchdog"""
+        return self._last_watchdog_failure_task
+
+    # TODO: add properties for various stats as needed
+
+    def start(self):
+        """
+        Start the Task runner
+        """
+        self.log.debug('starting', active=self._active)
+
+        if not self._active:
+            assert len(self._running_queue) == 0, 'Running task queue not empty'
+            self._active = True
+            self._run_next_task()
+
+    def stop(self):
+        """
+        Stop the Task runner, first stopping any tasks and flushing the queue
+        """
+        self.log.debug('stopping', active=self._active)
+
+        if self._active:
+            self._active = False
+
+            pq, self._pending_queue = self._pending_queue, dict()
+            rq, self._running_queue = self._running_queue, dict()
+
+            # Stop running tasks
+            for task in rq.itervalues():
+                try:
+                    task.stop()
+                except:
+                    pass
+
+            # Kill pending tasks
+            for d in pq.iterkeys():
+                try:
+                    d.cancel()
+                except:
+                    pass
+
+    def _run_next_task(self):
+        """
+        Search for next task to run, if one can
+        :return:
+        """
+        self.log.debug('run-next', active=self._active,
+                       num_running=len(self._running_queue),
+                       num_pending=len(self._pending_queue))
+
+        if self._active and len(self._pending_queue) > 0:
+            # Cannot run a new task if a running one needs the OMCI_CC exclusively
+
+            if any(task.exclusive for task in self._running_queue.itervalues()):
+                self.log.debug('exclusive-running')
+                return    # An exclusive task is already running
+
+            try:
+                priorities = [k for k in self._pending_queue.iterkeys()]
+                priorities.sort(reverse=True)
+                highest_priority = priorities[0] if len(priorities) else None
+
+                if highest_priority is not None:
+                    queue = self._pending_queue[highest_priority]
+                    next_task = queue[0] if len(queue) else None
+
+                    if next_task is not None:
+                        if next_task.exclusive and len(self._running_queue) > 0:
+                            self.log.debug('next-is-exclusive', task=str(next_task))
+                            return  # Next task to run needs exclusive access
+
+                        queue.pop(0)
+                        if len(queue) == 0:
+                            del self._pending_queue[highest_priority]
+
+                        self.log.debug('starting-task', task=str(next_task),
+                                       running=len(self._running_queue),
+                                       pending=len(self._pending_queue))
+
+                        self._running_queue[next_task.task_id] = next_task
+                        self.reactor.callLater(0, next_task.start)
+
+                # Run again if others are waiting
+                if len(self._pending_queue):
+                    self._run_next_task()
+
+            except Exception as e:
+                self.log.exception('run-next', e=e)
+
+    def _on_task_success(self, results, task):
+        """
+        A task completed successfully callback
+        :param results: deferred results
+        :param task: (Task) The task that succeeded
+        :return: deferred results
+        """
+        self.log.debug('task-success', task_id=str(task),
+                       running=len(self._running_queue),
+                       pending=len(self._pending_queue))
+        try:
+            assert task is not None and task.task_id in self._running_queue,\
+                'Task not found in running queue'
+
+            task.task_cleanup()
+            self._successful_tasks += 1
+            del self._running_queue[task.task_id]
+
+        except Exception as e:
+            self.log.exception('task-error', task=str(task), e=e)
+
+        finally:
+            reactor.callLater(0, self._run_next_task)
+
+        return results
+
+    def _on_task_failure(self, failure, task):
+        """
+        A task completed with failure callback
+        :param failure: (Failure) Failure results
+        :param task: (Task) The task that failed
+        :return: (Failure) Failure results
+        """
+        from voltha.extensions.omci.tasks.task import WatchdogTimeoutFailure
+
+        self.log.debug('task-failure', task_id=str(task),
+                       running=len(self._running_queue),
+                       pending=len(self._pending_queue))
+        try:
+            assert task is not None and task.task_id in self._running_queue,\
+                'Task not found in running queue'
+
+            task.task_cleanup()
+            self._failed_tasks += 1
+            del self._running_queue[task.task_id]
+
+            if isinstance(failure.value, WatchdogTimeoutFailure):
+                self._watchdog_timeouts += 1
+                self._last_watchdog_failure_task = task.name
+
+        except Exception as e:
+            # Check the pending queue
+
+            for priority, tasks in self._pending_queue.iteritems():
+                found = next((t for t in tasks if t.task_id == task.task_id), None)
+
+                if found is not None:
+                    self._pending_queue[task.priority].remove(task)
+                    if len(self._pending_queue[task.priority]) == 0:
+                        del self._pending_queue[task.priority]
+                    return failure
+
+            self.log.exception('task-error', task=str(task), e=e)
+            raise
+
+        finally:
+            reactor.callLater(0, self._run_next_task)
+
+        return failure
+
+    def queue_task(self, task):
+        """
+        Place a task on the queue to run
+
+        :param task: (Task) task to run
+        :return: (deferred) Deferred that will fire on task completion
+        """
+        self.log.debug('queue-task', active=self._active, task=str(task),
+                       running=len(self._running_queue),
+                       pending=len(self._pending_queue))
+
+        if task.priority not in self._pending_queue:
+            self._pending_queue[task.priority] = []
+
+        task.deferred.addCallbacks(self._on_task_success, self._on_task_failure,
+                                   callbackArgs=[task], errbackArgs=[task])
+
+        self._pending_queue[task.priority].append(task)
+        self._run_next_task()
+
+        return task.deferred
+
+    def cancel_task(self, task_id):
+        """
+        Cancel a pending or running task.  The cancel method will be called
+        for the task's deferred
+
+        :param task_id: (int) Task identifier
+        """
+        task = self._running_queue.get(task_id, None)
+
+        if task is not None:
+            try:
+                task.stop()
+            except Exception as e:
+                self.log.exception('stop-error', task=str(task), e=e)
+
+            reactor.callLater(0, self._run_next_task)
+
+        else:
+            for priority, tasks in self._pending_queue.iteritems():
+                task = next((t for t in tasks if t.task_id == task_id), None)
+
+                if task is not None:
+                    try:
+                        task.deferred.cancel()
+                    except Exception as e:
+                        self.log.exception('cancel-error', task=str(task), e=e)
+                    return
+