diff --git a/vendor/google.golang.org/grpc/clientconn.go b/vendor/google.golang.org/grpc/clientconn.go
index 34cc4c9..5a9e7d7 100644
--- a/vendor/google.golang.org/grpc/clientconn.go
+++ b/vendor/google.golang.org/grpc/clientconn.go
@@ -23,6 +23,7 @@
 	"errors"
 	"fmt"
 	"math"
+	"net/url"
 	"reflect"
 	"strings"
 	"sync"
@@ -37,7 +38,6 @@
 	"google.golang.org/grpc/internal/backoff"
 	"google.golang.org/grpc/internal/channelz"
 	"google.golang.org/grpc/internal/grpcsync"
-	"google.golang.org/grpc/internal/grpcutil"
 	iresolver "google.golang.org/grpc/internal/resolver"
 	"google.golang.org/grpc/internal/transport"
 	"google.golang.org/grpc/keepalive"
@@ -248,38 +248,15 @@
 	}
 
 	// Determine the resolver to use.
-	cc.parsedTarget = grpcutil.ParseTarget(cc.target, cc.dopts.copts.Dialer != nil)
-	channelz.Infof(logger, cc.channelzID, "parsed scheme: %q", cc.parsedTarget.Scheme)
-	resolverBuilder := cc.getResolver(cc.parsedTarget.Scheme)
-	if resolverBuilder == nil {
-		// If resolver builder is still nil, the parsed target's scheme is
-		// not registered. Fallback to default resolver and set Endpoint to
-		// the original target.
-		channelz.Infof(logger, cc.channelzID, "scheme %q not registered, fallback to default scheme", cc.parsedTarget.Scheme)
-		cc.parsedTarget = resolver.Target{
-			Scheme:   resolver.GetDefaultScheme(),
-			Endpoint: target,
-		}
-		resolverBuilder = cc.getResolver(cc.parsedTarget.Scheme)
-		if resolverBuilder == nil {
-			return nil, fmt.Errorf("could not get resolver for default scheme: %q", cc.parsedTarget.Scheme)
-		}
+	resolverBuilder, err := cc.parseTargetAndFindResolver()
+	if err != nil {
+		return nil, err
 	}
-
-	creds := cc.dopts.copts.TransportCredentials
-	if creds != nil && creds.Info().ServerName != "" {
-		cc.authority = creds.Info().ServerName
-	} else if cc.dopts.insecure && cc.dopts.authority != "" {
-		cc.authority = cc.dopts.authority
-	} else if strings.HasPrefix(cc.target, "unix:") || strings.HasPrefix(cc.target, "unix-abstract:") {
-		cc.authority = "localhost"
-	} else if strings.HasPrefix(cc.parsedTarget.Endpoint, ":") {
-		cc.authority = "localhost" + cc.parsedTarget.Endpoint
-	} else {
-		// Use endpoint from "scheme://authority/endpoint" as the default
-		// authority for ClientConn.
-		cc.authority = cc.parsedTarget.Endpoint
+	cc.authority, err = determineAuthority(cc.parsedTarget.Endpoint, cc.target, cc.dopts)
+	if err != nil {
+		return nil, err
 	}
+	channelz.Infof(logger, cc.channelzID, "Channel authority set to %q", cc.authority)
 
 	if cc.dopts.scChan != nil && !scSet {
 		// Blocking wait for the initial service config.
@@ -902,10 +879,7 @@
 	// ac.state is Ready, try to find the connected address.
 	var curAddrFound bool
 	for _, a := range addrs {
-		// a.ServerName takes precedent over ClientConn authority, if present.
-		if a.ServerName == "" {
-			a.ServerName = ac.cc.authority
-		}
+		a.ServerName = ac.cc.getServerName(a)
 		if reflect.DeepEqual(ac.curAddr, a) {
 			curAddrFound = true
 			break
@@ -919,6 +893,26 @@
 	return curAddrFound
 }
 
+// getServerName determines the serverName to be used in the connection
+// handshake. The default value for the serverName is the authority on the
+// ClientConn, which either comes from the user's dial target or through an
+// authority override specified using the WithAuthority dial option. Name
+// resolvers can specify a per-address override for the serverName through the
+// resolver.Address.ServerName field which is used only if the WithAuthority
+// dial option was not used. The rationale is that per-address authority
+// overrides specified by the name resolver can represent a security risk, while
+// an override specified by the user is more dependable since they probably know
+// what they are doing.
+func (cc *ClientConn) getServerName(addr resolver.Address) string {
+	if cc.dopts.authority != "" {
+		return cc.dopts.authority
+	}
+	if addr.ServerName != "" {
+		return addr.ServerName
+	}
+	return cc.authority
+}
+
 func getMethodConfig(sc *ServiceConfig, method string) MethodConfig {
 	if sc == nil {
 		return MethodConfig{}
@@ -1275,11 +1269,7 @@
 	prefaceReceived := grpcsync.NewEvent()
 	connClosed := grpcsync.NewEvent()
 
-	// addr.ServerName takes precedent over ClientConn authority, if present.
-	if addr.ServerName == "" {
-		addr.ServerName = ac.cc.authority
-	}
-
+	addr.ServerName = ac.cc.getServerName(addr)
 	hctx, hcancel := context.WithCancel(ac.ctx)
 	hcStarted := false // protected by ac.mu
 
@@ -1621,3 +1611,114 @@
 	defer cc.lceMu.Unlock()
 	return cc.lastConnectionError
 }
+
+func (cc *ClientConn) parseTargetAndFindResolver() (resolver.Builder, error) {
+	channelz.Infof(logger, cc.channelzID, "original dial target is: %q", cc.target)
+
+	var rb resolver.Builder
+	parsedTarget, err := parseTarget(cc.target)
+	if err != nil {
+		channelz.Infof(logger, cc.channelzID, "dial target %q parse failed: %v", cc.target, err)
+	} else {
+		channelz.Infof(logger, cc.channelzID, "parsed dial target is: %+v", parsedTarget)
+		rb = cc.getResolver(parsedTarget.Scheme)
+		if rb != nil {
+			cc.parsedTarget = parsedTarget
+			return rb, nil
+		}
+	}
+
+	// We are here because the user's dial target did not contain a scheme or
+	// specified an unregistered scheme. We should fallback to the default
+	// scheme, except when a custom dialer is specified in which case, we should
+	// always use passthrough scheme.
+	defScheme := resolver.GetDefaultScheme()
+	channelz.Infof(logger, cc.channelzID, "fallback to scheme %q", defScheme)
+	canonicalTarget := defScheme + ":///" + cc.target
+
+	parsedTarget, err = parseTarget(canonicalTarget)
+	if err != nil {
+		channelz.Infof(logger, cc.channelzID, "dial target %q parse failed: %v", canonicalTarget, err)
+		return nil, err
+	}
+	channelz.Infof(logger, cc.channelzID, "parsed dial target is: %+v", parsedTarget)
+	rb = cc.getResolver(parsedTarget.Scheme)
+	if rb == nil {
+		return nil, fmt.Errorf("could not get resolver for default scheme: %q", parsedTarget.Scheme)
+	}
+	cc.parsedTarget = parsedTarget
+	return rb, nil
+}
+
+// parseTarget uses RFC 3986 semantics to parse the given target into a
+// resolver.Target struct containing scheme, authority and endpoint. Query
+// params are stripped from the endpoint.
+func parseTarget(target string) (resolver.Target, error) {
+	u, err := url.Parse(target)
+	if err != nil {
+		return resolver.Target{}, err
+	}
+	// For targets of the form "[scheme]://[authority]/endpoint, the endpoint
+	// value returned from url.Parse() contains a leading "/". Although this is
+	// in accordance with RFC 3986, we do not want to break existing resolver
+	// implementations which expect the endpoint without the leading "/". So, we
+	// end up stripping the leading "/" here. But this will result in an
+	// incorrect parsing for something like "unix:///path/to/socket". Since we
+	// own the "unix" resolver, we can workaround in the unix resolver by using
+	// the `URL` field instead of the `Endpoint` field.
+	endpoint := u.Path
+	if endpoint == "" {
+		endpoint = u.Opaque
+	}
+	endpoint = strings.TrimPrefix(endpoint, "/")
+	return resolver.Target{
+		Scheme:    u.Scheme,
+		Authority: u.Host,
+		Endpoint:  endpoint,
+		URL:       *u,
+	}, nil
+}
+
+// Determine channel authority. The order of precedence is as follows:
+// - user specified authority override using `WithAuthority` dial option
+// - creds' notion of server name for the authentication handshake
+// - endpoint from dial target of the form "scheme://[authority]/endpoint"
+func determineAuthority(endpoint, target string, dopts dialOptions) (string, error) {
+	// Historically, we had two options for users to specify the serverName or
+	// authority for a channel. One was through the transport credentials
+	// (either in its constructor, or through the OverrideServerName() method).
+	// The other option (for cases where WithInsecure() dial option was used)
+	// was to use the WithAuthority() dial option.
+	//
+	// A few things have changed since:
+	// - `insecure` package with an implementation of the `TransportCredentials`
+	//   interface for the insecure case
+	// - WithAuthority() dial option support for secure credentials
+	authorityFromCreds := ""
+	if creds := dopts.copts.TransportCredentials; creds != nil && creds.Info().ServerName != "" {
+		authorityFromCreds = creds.Info().ServerName
+	}
+	authorityFromDialOption := dopts.authority
+	if (authorityFromCreds != "" && authorityFromDialOption != "") && authorityFromCreds != authorityFromDialOption {
+		return "", fmt.Errorf("ClientConn's authority from transport creds %q and dial option %q don't match", authorityFromCreds, authorityFromDialOption)
+	}
+
+	switch {
+	case authorityFromDialOption != "":
+		return authorityFromDialOption, nil
+	case authorityFromCreds != "":
+		return authorityFromCreds, nil
+	case strings.HasPrefix(target, "unix:") || strings.HasPrefix(target, "unix-abstract:"):
+		// TODO: remove when the unix resolver implements optional interface to
+		// return channel authority.
+		return "localhost", nil
+	case strings.HasPrefix(endpoint, ":"):
+		return "localhost" + endpoint, nil
+	default:
+		// TODO: Define an optional interface on the resolver builder to return
+		// the channel authority given the user's dial target. For resolvers
+		// which don't implement this interface, we will use the endpoint from
+		// "scheme://authority/endpoint" as the default authority.
+		return endpoint, nil
+	}
+}