VOL-2112 move to voltha-lib-go
Change-Id: Ic1af08003c1d2c698c0cce371e64f47b47b8d875
diff --git a/vendor/github.com/Shopify/sarama/broker.go b/vendor/github.com/Shopify/sarama/broker.go
index 9129089..9c3e5a0 100644
--- a/vendor/github.com/Shopify/sarama/broker.go
+++ b/vendor/github.com/Shopify/sarama/broker.go
@@ -13,24 +13,25 @@
"sync/atomic"
"time"
- "github.com/rcrowley/go-metrics"
+ metrics "github.com/rcrowley/go-metrics"
)
// Broker represents a single Kafka broker connection. All operations on this object are entirely concurrency-safe.
type Broker struct {
- id int32
- addr string
+ conf *Config
rack *string
- conf *Config
+ id int32
+ addr string
correlationID int32
conn net.Conn
connErr error
lock sync.Mutex
opened int32
+ responses chan responsePromise
+ done chan bool
- responses chan responsePromise
- done chan bool
+ registeredMetrics []string
incomingByteRate metrics.Meter
requestRate metrics.Meter
@@ -46,6 +47,8 @@
brokerOutgoingByteRate metrics.Meter
brokerResponseRate metrics.Meter
brokerResponseSize metrics.Histogram
+
+ kerberosAuthenticator GSSAPIKerberosAuth
}
// SASLMechanism specifies the SASL mechanism the client uses to authenticate with the broker
@@ -56,6 +59,11 @@
SASLTypeOAuth = "OAUTHBEARER"
// SASLTypePlaintext represents the SASL/PLAIN mechanism
SASLTypePlaintext = "PLAIN"
+ // SASLTypeSCRAMSHA256 represents the SCRAM-SHA-256 mechanism.
+ SASLTypeSCRAMSHA256 = "SCRAM-SHA-256"
+ // SASLTypeSCRAMSHA512 represents the SCRAM-SHA-512 mechanism.
+ SASLTypeSCRAMSHA512 = "SCRAM-SHA-512"
+ SASLTypeGSSAPI = "GSSAPI"
// SASLHandshakeV0 is v0 of the Kafka SASL handshake protocol. Client and
// server negotiate SASL auth using opaque packets.
SASLHandshakeV0 = int16(0)
@@ -92,6 +100,20 @@
Token() (*AccessToken, error)
}
+// SCRAMClient is a an interface to a SCRAM
+// client implementation.
+type SCRAMClient interface {
+ // Begin prepares the client for the SCRAM exchange
+ // with the server with a user name and a password
+ Begin(userName, password, authzID string) error
+ // Step steps client through the SCRAM exchange. It is
+ // called repeatedly until it errors or `Done` returns true.
+ Step(challenge string) (response string, err error)
+ // Done should return true when the SCRAM conversation
+ // is over.
+ Done() bool
+}
+
type responsePromise struct {
requestTime time.Time
correlationID int32
@@ -137,6 +159,8 @@
if conf.Net.TLS.Enable {
b.conn, b.connErr = tls.DialWithDialer(&dialer, "tcp", b.addr, conf.Net.TLS.Config)
+ } else if conf.Net.Proxy.Enable {
+ b.conn, b.connErr = conf.Net.Proxy.Dialer.Dial("tcp", b.addr)
} else {
b.conn, b.connErr = dialer.Dial("tcp", b.addr)
}
@@ -161,13 +185,7 @@
// Do not gather metrics for seeded broker (only used during bootstrap) because they share
// the same id (-1) and are already exposed through the global metrics above
if b.id >= 0 {
- b.brokerIncomingByteRate = getOrRegisterBrokerMeter("incoming-byte-rate", b, conf.MetricRegistry)
- b.brokerRequestRate = getOrRegisterBrokerMeter("request-rate", b, conf.MetricRegistry)
- b.brokerRequestSize = getOrRegisterBrokerHistogram("request-size", b, conf.MetricRegistry)
- b.brokerRequestLatency = getOrRegisterBrokerHistogram("request-latency-in-ms", b, conf.MetricRegistry)
- b.brokerOutgoingByteRate = getOrRegisterBrokerMeter("outgoing-byte-rate", b, conf.MetricRegistry)
- b.brokerResponseRate = getOrRegisterBrokerMeter("response-rate", b, conf.MetricRegistry)
- b.brokerResponseSize = getOrRegisterBrokerHistogram("response-size", b, conf.MetricRegistry)
+ b.registerMetrics()
}
if conf.Net.SASL.Enable {
@@ -210,6 +228,7 @@
return b.conn != nil, b.connErr
}
+//Close closes the broker resources
func (b *Broker) Close() error {
b.lock.Lock()
defer b.lock.Unlock()
@@ -228,12 +247,7 @@
b.done = nil
b.responses = nil
- if b.id >= 0 {
- b.conf.MetricRegistry.Unregister(getMetricNameForBroker("incoming-byte-rate", b))
- b.conf.MetricRegistry.Unregister(getMetricNameForBroker("request-rate", b))
- b.conf.MetricRegistry.Unregister(getMetricNameForBroker("outgoing-byte-rate", b))
- b.conf.MetricRegistry.Unregister(getMetricNameForBroker("response-rate", b))
- }
+ b.unregisterMetrics()
if err == nil {
Logger.Printf("Closed connection to broker %s\n", b.addr)
@@ -267,6 +281,7 @@
return *b.rack
}
+//GetMetadata send a metadata request and returns a metadata response or error
func (b *Broker) GetMetadata(request *MetadataRequest) (*MetadataResponse, error) {
response := new(MetadataResponse)
@@ -279,6 +294,7 @@
return response, nil
}
+//GetConsumerMetadata send a consumer metadata request and returns a consumer metadata response or error
func (b *Broker) GetConsumerMetadata(request *ConsumerMetadataRequest) (*ConsumerMetadataResponse, error) {
response := new(ConsumerMetadataResponse)
@@ -291,6 +307,7 @@
return response, nil
}
+//FindCoordinator sends a find coordinate request and returns a response or error
func (b *Broker) FindCoordinator(request *FindCoordinatorRequest) (*FindCoordinatorResponse, error) {
response := new(FindCoordinatorResponse)
@@ -303,6 +320,7 @@
return response, nil
}
+//GetAvailableOffsets return an offset response or error
func (b *Broker) GetAvailableOffsets(request *OffsetRequest) (*OffsetResponse, error) {
response := new(OffsetResponse)
@@ -315,9 +333,12 @@
return response, nil
}
+//Produce returns a produce response or error
func (b *Broker) Produce(request *ProduceRequest) (*ProduceResponse, error) {
- var response *ProduceResponse
- var err error
+ var (
+ response *ProduceResponse
+ err error
+ )
if request.RequiredAcks == NoResponse {
err = b.sendAndReceive(request, nil)
@@ -333,11 +354,11 @@
return response, nil
}
+//Fetch returns a FetchResponse or error
func (b *Broker) Fetch(request *FetchRequest) (*FetchResponse, error) {
response := new(FetchResponse)
err := b.sendAndReceive(request, response)
-
if err != nil {
return nil, err
}
@@ -345,11 +366,11 @@
return response, nil
}
+//CommitOffset return an Offset commit reponse or error
func (b *Broker) CommitOffset(request *OffsetCommitRequest) (*OffsetCommitResponse, error) {
response := new(OffsetCommitResponse)
err := b.sendAndReceive(request, response)
-
if err != nil {
return nil, err
}
@@ -357,11 +378,11 @@
return response, nil
}
+//FetchOffset returns an offset fetch response or error
func (b *Broker) FetchOffset(request *OffsetFetchRequest) (*OffsetFetchResponse, error) {
response := new(OffsetFetchResponse)
err := b.sendAndReceive(request, response)
-
if err != nil {
return nil, err
}
@@ -369,6 +390,7 @@
return response, nil
}
+//JoinGroup returns a join group response or error
func (b *Broker) JoinGroup(request *JoinGroupRequest) (*JoinGroupResponse, error) {
response := new(JoinGroupResponse)
@@ -380,6 +402,7 @@
return response, nil
}
+//SyncGroup returns a sync group response or error
func (b *Broker) SyncGroup(request *SyncGroupRequest) (*SyncGroupResponse, error) {
response := new(SyncGroupResponse)
@@ -391,6 +414,7 @@
return response, nil
}
+//LeaveGroup return a leave group response or error
func (b *Broker) LeaveGroup(request *LeaveGroupRequest) (*LeaveGroupResponse, error) {
response := new(LeaveGroupResponse)
@@ -402,6 +426,7 @@
return response, nil
}
+//Heartbeat returns a heartbeat response or error
func (b *Broker) Heartbeat(request *HeartbeatRequest) (*HeartbeatResponse, error) {
response := new(HeartbeatResponse)
@@ -413,6 +438,7 @@
return response, nil
}
+//ListGroups return a list group response or error
func (b *Broker) ListGroups(request *ListGroupsRequest) (*ListGroupsResponse, error) {
response := new(ListGroupsResponse)
@@ -424,6 +450,7 @@
return response, nil
}
+//DescribeGroups return describe group response or error
func (b *Broker) DescribeGroups(request *DescribeGroupsRequest) (*DescribeGroupsResponse, error) {
response := new(DescribeGroupsResponse)
@@ -435,6 +462,7 @@
return response, nil
}
+//ApiVersions return api version response or error
func (b *Broker) ApiVersions(request *ApiVersionsRequest) (*ApiVersionsResponse, error) {
response := new(ApiVersionsResponse)
@@ -446,6 +474,7 @@
return response, nil
}
+//CreateTopics send a create topic request and returns create topic response
func (b *Broker) CreateTopics(request *CreateTopicsRequest) (*CreateTopicsResponse, error) {
response := new(CreateTopicsResponse)
@@ -457,6 +486,7 @@
return response, nil
}
+//DeleteTopics sends a delete topic request and returns delete topic response
func (b *Broker) DeleteTopics(request *DeleteTopicsRequest) (*DeleteTopicsResponse, error) {
response := new(DeleteTopicsResponse)
@@ -468,6 +498,8 @@
return response, nil
}
+//CreatePartitions sends a create partition request and returns create
+//partitions response or error
func (b *Broker) CreatePartitions(request *CreatePartitionsRequest) (*CreatePartitionsResponse, error) {
response := new(CreatePartitionsResponse)
@@ -479,6 +511,8 @@
return response, nil
}
+//DeleteRecords send a request to delete records and return delete record
+//response or error
func (b *Broker) DeleteRecords(request *DeleteRecordsRequest) (*DeleteRecordsResponse, error) {
response := new(DeleteRecordsResponse)
@@ -490,6 +524,7 @@
return response, nil
}
+//DescribeAcls sends a describe acl request and returns a response or error
func (b *Broker) DescribeAcls(request *DescribeAclsRequest) (*DescribeAclsResponse, error) {
response := new(DescribeAclsResponse)
@@ -501,6 +536,7 @@
return response, nil
}
+//CreateAcls sends a create acl request and returns a response or error
func (b *Broker) CreateAcls(request *CreateAclsRequest) (*CreateAclsResponse, error) {
response := new(CreateAclsResponse)
@@ -512,6 +548,7 @@
return response, nil
}
+//DeleteAcls sends a delete acl request and returns a response or error
func (b *Broker) DeleteAcls(request *DeleteAclsRequest) (*DeleteAclsResponse, error) {
response := new(DeleteAclsResponse)
@@ -523,6 +560,7 @@
return response, nil
}
+//InitProducerID sends an init producer request and returns a response or error
func (b *Broker) InitProducerID(request *InitProducerIDRequest) (*InitProducerIDResponse, error) {
response := new(InitProducerIDResponse)
@@ -534,6 +572,8 @@
return response, nil
}
+//AddPartitionsToTxn send a request to add partition to txn and returns
+//a response or error
func (b *Broker) AddPartitionsToTxn(request *AddPartitionsToTxnRequest) (*AddPartitionsToTxnResponse, error) {
response := new(AddPartitionsToTxnResponse)
@@ -545,6 +585,8 @@
return response, nil
}
+//AddOffsetsToTxn sends a request to add offsets to txn and returns a response
+//or error
func (b *Broker) AddOffsetsToTxn(request *AddOffsetsToTxnRequest) (*AddOffsetsToTxnResponse, error) {
response := new(AddOffsetsToTxnResponse)
@@ -556,6 +598,7 @@
return response, nil
}
+//EndTxn sends a request to end txn and returns a response or error
func (b *Broker) EndTxn(request *EndTxnRequest) (*EndTxnResponse, error) {
response := new(EndTxnResponse)
@@ -567,6 +610,8 @@
return response, nil
}
+//TxnOffsetCommit sends a request to commit transaction offsets and returns
+//a response or error
func (b *Broker) TxnOffsetCommit(request *TxnOffsetCommitRequest) (*TxnOffsetCommitResponse, error) {
response := new(TxnOffsetCommitResponse)
@@ -578,6 +623,8 @@
return response, nil
}
+//DescribeConfigs sends a request to describe config and returns a response or
+//error
func (b *Broker) DescribeConfigs(request *DescribeConfigsRequest) (*DescribeConfigsResponse, error) {
response := new(DescribeConfigsResponse)
@@ -589,6 +636,7 @@
return response, nil
}
+//AlterConfigs sends a request to alter config and return a response or error
func (b *Broker) AlterConfigs(request *AlterConfigsRequest) (*AlterConfigsResponse, error) {
response := new(AlterConfigsResponse)
@@ -600,6 +648,7 @@
return response, nil
}
+//DeleteGroups sends a request to delete groups and returns a response or error
func (b *Broker) DeleteGroups(request *DeleteGroupsRequest) (*DeleteGroupsResponse, error) {
response := new(DeleteGroupsResponse)
@@ -638,7 +687,7 @@
requestTime := time.Now()
bytes, err := b.conn.Write(buf)
- b.updateOutgoingCommunicationMetrics(bytes)
+ b.updateOutgoingCommunicationMetrics(bytes) //TODO: should it be after error check
if err != nil {
return nil, err
}
@@ -658,7 +707,6 @@
func (b *Broker) sendAndReceive(req protocolBody, res versionedDecoder) error {
promise, err := b.send(req, res != nil)
-
if err != nil {
return err
}
@@ -707,11 +755,11 @@
}
func (b *Broker) encode(pe packetEncoder, version int16) (err error) {
-
host, portstr, err := net.SplitHostPort(b.addr)
if err != nil {
return err
}
+
port, err := strconv.Atoi(portstr)
if err != nil {
return err
@@ -739,6 +787,7 @@
func (b *Broker) responseReceiver() {
var dead error
header := make([]byte, 8)
+
for response := range b.responses {
if dead != nil {
response.errors <- dead
@@ -793,14 +842,28 @@
}
func (b *Broker) authenticateViaSASL() error {
- if b.conf.Net.SASL.Mechanism == SASLTypeOAuth {
+ switch b.conf.Net.SASL.Mechanism {
+ case SASLTypeOAuth:
return b.sendAndReceiveSASLOAuth(b.conf.Net.SASL.TokenProvider)
+ case SASLTypeSCRAMSHA256, SASLTypeSCRAMSHA512:
+ return b.sendAndReceiveSASLSCRAMv1()
+ case SASLTypeGSSAPI:
+ return b.sendAndReceiveKerberos()
+ default:
+ return b.sendAndReceiveSASLPlainAuth()
}
- return b.sendAndReceiveSASLPlainAuth()
}
-func (b *Broker) sendAndReceiveSASLHandshake(saslType string, version int16) error {
- rb := &SaslHandshakeRequest{Mechanism: saslType, Version: version}
+func (b *Broker) sendAndReceiveKerberos() error {
+ b.kerberosAuthenticator.Config = &b.conf.Net.SASL.GSSAPI
+ if b.kerberosAuthenticator.NewKerberosClientFunc == nil {
+ b.kerberosAuthenticator.NewKerberosClientFunc = NewKerberosClient
+ }
+ return b.kerberosAuthenticator.Authorize(b)
+}
+
+func (b *Broker) sendAndReceiveSASLHandshake(saslType SASLMechanism, version int16) error {
+ rb := &SaslHandshakeRequest{Mechanism: string(saslType), Version: version}
req := &request{correlationID: b.correlationID, clientID: b.conf.ClientID, body: rb}
buf, err := encode(req, b.conf.MetricRegistry)
@@ -828,6 +891,7 @@
Logger.Printf("Failed to read SASL handshake header : %s\n", err.Error())
return err
}
+
length := binary.BigEndian.Uint32(header[:4])
payload := make([]byte, length-4)
n, err := io.ReadFull(b.conn, payload)
@@ -835,23 +899,29 @@
Logger.Printf("Failed to read SASL handshake payload : %s\n", err.Error())
return err
}
+
b.updateIncomingCommunicationMetrics(n+8, time.Since(requestTime))
res := &SaslHandshakeResponse{}
+
err = versionedDecode(payload, res, 0)
if err != nil {
Logger.Printf("Failed to parse SASL handshake : %s\n", err.Error())
return err
}
+
if res.Err != ErrNoError {
Logger.Printf("Invalid SASL Mechanism : %s\n", res.Err.Error())
return res.Err
}
- Logger.Print("Successful SASL handshake")
+
+ Logger.Print("Successful SASL handshake. Available mechanisms: ", res.EnabledMechanisms)
return nil
}
-// Kafka 0.10.0 plans to support SASL Plain and Kerberos as per PR #812 (KIP-43)/(JIRA KAFKA-3149)
-// Some hosted kafka services such as IBM Message Hub already offer SASL/PLAIN auth with Kafka 0.9
+// Kafka 0.10.x supported SASL PLAIN/Kerberos via KAFKA-3149 (KIP-43).
+// Kafka 1.x.x onward added a SaslAuthenticate request/response message which
+// wraps the SASL flow in the Kafka protocol, which allows for returning
+// meaningful errors on authentication failure.
//
// In SASL Plain, Kafka expects the auth header to be in the following format
// Message format (from https://tools.ietf.org/html/rfc4616):
@@ -865,17 +935,34 @@
// SAFE = UTF1 / UTF2 / UTF3 / UTF4
// ;; any UTF-8 encoded Unicode character except NUL
//
+// With SASL v0 handshake and auth then:
// When credentials are valid, Kafka returns a 4 byte array of null characters.
-// When credentials are invalid, Kafka closes the connection. This does not seem to be the ideal way
-// of responding to bad credentials but thats how its being done today.
+// When credentials are invalid, Kafka closes the connection.
+//
+// With SASL v1 handshake and auth then:
+// When credentials are invalid, Kafka replies with a SaslAuthenticate response
+// containing an error code and message detailing the authentication failure.
func (b *Broker) sendAndReceiveSASLPlainAuth() error {
+ // default to V0 to allow for backward compatability when SASL is enabled
+ // but not the handshake
if b.conf.Net.SASL.Handshake {
- handshakeErr := b.sendAndReceiveSASLHandshake(SASLTypePlaintext, SASLHandshakeV0)
+
+ handshakeErr := b.sendAndReceiveSASLHandshake(SASLTypePlaintext, b.conf.Net.SASL.Version)
if handshakeErr != nil {
Logger.Printf("Error while performing SASL handshake %s\n", b.addr)
return handshakeErr
}
}
+
+ if b.conf.Net.SASL.Version == SASLHandshakeV1 {
+ return b.sendAndReceiveV1SASLPlainAuth()
+ }
+ return b.sendAndReceiveV0SASLPlainAuth()
+}
+
+// sendAndReceiveV0SASLPlainAuth flows the v0 sasl auth NOT wrapped in the kafka protocol
+func (b *Broker) sendAndReceiveV0SASLPlainAuth() error {
+
length := 1 + len(b.conf.Net.SASL.User) + 1 + len(b.conf.Net.SASL.Password)
authBytes := make([]byte, length+4) //4 byte length header + auth data
binary.BigEndian.PutUint32(authBytes, uint32(length))
@@ -909,55 +996,197 @@
return nil
}
+// sendAndReceiveV1SASLPlainAuth flows the v1 sasl authentication using the kafka protocol
+func (b *Broker) sendAndReceiveV1SASLPlainAuth() error {
+ correlationID := b.correlationID
+
+ requestTime := time.Now()
+
+ bytesWritten, err := b.sendSASLPlainAuthClientResponse(correlationID)
+
+ b.updateOutgoingCommunicationMetrics(bytesWritten)
+
+ if err != nil {
+ Logger.Printf("Failed to write SASL auth header to broker %s: %s\n", b.addr, err.Error())
+ return err
+ }
+
+ b.correlationID++
+
+ bytesRead, err := b.receiveSASLServerResponse(&SaslAuthenticateResponse{}, correlationID)
+ b.updateIncomingCommunicationMetrics(bytesRead, time.Since(requestTime))
+
+ // With v1 sasl we get an error message set in the response we can return
+ if err != nil {
+ Logger.Printf("Error returned from broker during SASL flow %s: %s\n", b.addr, err.Error())
+ return err
+ }
+
+ return nil
+}
+
// sendAndReceiveSASLOAuth performs the authentication flow as described by KIP-255
// https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=75968876
func (b *Broker) sendAndReceiveSASLOAuth(provider AccessTokenProvider) error {
-
if err := b.sendAndReceiveSASLHandshake(SASLTypeOAuth, SASLHandshakeV1); err != nil {
return err
}
token, err := provider.Token()
-
if err != nil {
return err
}
- requestTime := time.Now()
-
- correlationID := b.correlationID
-
- bytesWritten, err := b.sendSASLOAuthBearerClientResponse(token, correlationID)
-
+ message, err := buildClientFirstMessage(token)
if err != nil {
return err
}
+ challenged, err := b.sendClientMessage(message)
+ if err != nil {
+ return err
+ }
+
+ if challenged {
+ // Abort the token exchange. The broker returns the failure code.
+ _, err = b.sendClientMessage([]byte(`\x01`))
+ }
+
+ return err
+}
+
+// sendClientMessage sends a SASL/OAUTHBEARER client message and returns true
+// if the broker responds with a challenge, in which case the token is
+// rejected.
+func (b *Broker) sendClientMessage(message []byte) (bool, error) {
+
+ requestTime := time.Now()
+ correlationID := b.correlationID
+
+ bytesWritten, err := b.sendSASLOAuthBearerClientMessage(message, correlationID)
+ if err != nil {
+ return false, err
+ }
+
b.updateOutgoingCommunicationMetrics(bytesWritten)
-
b.correlationID++
- bytesRead, err := b.receiveSASLOAuthBearerServerResponse(correlationID)
-
- if err != nil {
- return err
- }
+ res := &SaslAuthenticateResponse{}
+ bytesRead, err := b.receiveSASLServerResponse(res, correlationID)
requestLatency := time.Since(requestTime)
b.updateIncomingCommunicationMetrics(bytesRead, requestLatency)
+ isChallenge := len(res.SaslAuthBytes) > 0
+
+ if isChallenge && err != nil {
+ Logger.Printf("Broker rejected authentication token: %s", res.SaslAuthBytes)
+ }
+
+ return isChallenge, err
+}
+
+func (b *Broker) sendAndReceiveSASLSCRAMv1() error {
+ if err := b.sendAndReceiveSASLHandshake(b.conf.Net.SASL.Mechanism, SASLHandshakeV1); err != nil {
+ return err
+ }
+
+ scramClient := b.conf.Net.SASL.SCRAMClientGeneratorFunc()
+ if err := scramClient.Begin(b.conf.Net.SASL.User, b.conf.Net.SASL.Password, b.conf.Net.SASL.SCRAMAuthzID); err != nil {
+ return fmt.Errorf("failed to start SCRAM exchange with the server: %s", err.Error())
+ }
+
+ msg, err := scramClient.Step("")
+ if err != nil {
+ return fmt.Errorf("failed to advance the SCRAM exchange: %s", err.Error())
+
+ }
+
+ for !scramClient.Done() {
+ requestTime := time.Now()
+ correlationID := b.correlationID
+ bytesWritten, err := b.sendSaslAuthenticateRequest(correlationID, []byte(msg))
+ if err != nil {
+ Logger.Printf("Failed to write SASL auth header to broker %s: %s\n", b.addr, err.Error())
+ return err
+ }
+
+ b.updateOutgoingCommunicationMetrics(bytesWritten)
+ b.correlationID++
+ challenge, err := b.receiveSaslAuthenticateResponse(correlationID)
+ if err != nil {
+ Logger.Printf("Failed to read response while authenticating with SASL to broker %s: %s\n", b.addr, err.Error())
+ return err
+ }
+
+ b.updateIncomingCommunicationMetrics(len(challenge), time.Since(requestTime))
+ msg, err = scramClient.Step(string(challenge))
+ if err != nil {
+ Logger.Println("SASL authentication failed", err)
+ return err
+ }
+ }
+
+ Logger.Println("SASL authentication succeeded")
return nil
}
+func (b *Broker) sendSaslAuthenticateRequest(correlationID int32, msg []byte) (int, error) {
+ rb := &SaslAuthenticateRequest{msg}
+ req := &request{correlationID: correlationID, clientID: b.conf.ClientID, body: rb}
+ buf, err := encode(req, b.conf.MetricRegistry)
+ if err != nil {
+ return 0, err
+ }
+
+ if err := b.conn.SetWriteDeadline(time.Now().Add(b.conf.Net.WriteTimeout)); err != nil {
+ return 0, err
+ }
+
+ return b.conn.Write(buf)
+}
+
+func (b *Broker) receiveSaslAuthenticateResponse(correlationID int32) ([]byte, error) {
+ buf := make([]byte, responseLengthSize+correlationIDSize)
+ _, err := io.ReadFull(b.conn, buf)
+ if err != nil {
+ return nil, err
+ }
+
+ header := responseHeader{}
+ err = decode(buf, &header)
+ if err != nil {
+ return nil, err
+ }
+
+ if header.correlationID != correlationID {
+ return nil, fmt.Errorf("correlation ID didn't match, wanted %d, got %d", b.correlationID, header.correlationID)
+ }
+
+ buf = make([]byte, header.length-correlationIDSize)
+ _, err = io.ReadFull(b.conn, buf)
+ if err != nil {
+ return nil, err
+ }
+
+ res := &SaslAuthenticateResponse{}
+ if err := versionedDecode(buf, res, 0); err != nil {
+ return nil, err
+ }
+ if res.Err != ErrNoError {
+ return nil, res.Err
+ }
+ return res.SaslAuthBytes, nil
+}
+
// Build SASL/OAUTHBEARER initial client response as described by RFC-7628
// https://tools.ietf.org/html/rfc7628
-func buildClientInitialResponse(token *AccessToken) ([]byte, error) {
-
+func buildClientFirstMessage(token *AccessToken) ([]byte, error) {
var ext string
if token.Extensions != nil && len(token.Extensions) > 0 {
if _, ok := token.Extensions[SASLExtKeyAuth]; ok {
- return []byte{}, fmt.Errorf("The extension `%s` is invalid", SASLExtKeyAuth)
+ return []byte{}, fmt.Errorf("the extension `%s` is invalid", SASLExtKeyAuth)
}
ext = "\x01" + mapToString(token.Extensions, "=", "\x01")
}
@@ -970,7 +1199,6 @@
// mapToString returns a list of key-value pairs ordered by key.
// keyValSep separates the key from the value. elemSep separates each pair.
func mapToString(extensions map[string]string, keyValSep string, elemSep string) string {
-
buf := make([]string, 0, len(extensions))
for k, v := range extensions {
@@ -982,20 +1210,30 @@
return strings.Join(buf, elemSep)
}
-func (b *Broker) sendSASLOAuthBearerClientResponse(token *AccessToken, correlationID int32) (int, error) {
-
- initialResp, err := buildClientInitialResponse(token)
-
+func (b *Broker) sendSASLPlainAuthClientResponse(correlationID int32) (int, error) {
+ authBytes := []byte("\x00" + b.conf.Net.SASL.User + "\x00" + b.conf.Net.SASL.Password)
+ rb := &SaslAuthenticateRequest{authBytes}
+ req := &request{correlationID: correlationID, clientID: b.conf.ClientID, body: rb}
+ buf, err := encode(req, b.conf.MetricRegistry)
if err != nil {
return 0, err
}
+ err = b.conn.SetWriteDeadline(time.Now().Add(b.conf.Net.WriteTimeout))
+ if err != nil {
+ Logger.Printf("Failed to set write deadline when doing SASL auth with broker %s: %s\n", b.addr, err.Error())
+ return 0, err
+ }
+ return b.conn.Write(buf)
+}
+
+func (b *Broker) sendSASLOAuthBearerClientMessage(initialResp []byte, correlationID int32) (int, error) {
+
rb := &SaslAuthenticateRequest{initialResp}
req := &request{correlationID: correlationID, clientID: b.conf.ClientID, body: rb}
buf, err := encode(req, b.conf.MetricRegistry)
-
if err != nil {
return 0, err
}
@@ -1007,12 +1245,11 @@
return b.conn.Write(buf)
}
-func (b *Broker) receiveSASLOAuthBearerServerResponse(correlationID int32) (int, error) {
+func (b *Broker) receiveSASLServerResponse(res *SaslAuthenticateResponse, correlationID int32) (int, error) {
- buf := make([]byte, 8)
+ buf := make([]byte, responseLengthSize+correlationIDSize)
bytesRead, err := io.ReadFull(b.conn, buf)
-
if err != nil {
return bytesRead, err
}
@@ -1020,7 +1257,6 @@
header := responseHeader{}
err = decode(buf, &header)
-
if err != nil {
return bytesRead, err
}
@@ -1029,48 +1265,39 @@
return bytesRead, fmt.Errorf("correlation ID didn't match, wanted %d, got %d", b.correlationID, header.correlationID)
}
- buf = make([]byte, header.length-4)
+ buf = make([]byte, header.length-correlationIDSize)
c, err := io.ReadFull(b.conn, buf)
-
bytesRead += c
-
if err != nil {
return bytesRead, err
}
- res := &SaslAuthenticateResponse{}
-
if err := versionedDecode(buf, res, 0); err != nil {
return bytesRead, err
}
- if err != nil {
- return bytesRead, err
- }
-
if res.Err != ErrNoError {
return bytesRead, res.Err
}
- if len(res.SaslAuthBytes) > 0 {
- Logger.Printf("Received SASL auth response: %s", res.SaslAuthBytes)
- }
-
return bytesRead, nil
}
func (b *Broker) updateIncomingCommunicationMetrics(bytes int, requestLatency time.Duration) {
b.updateRequestLatencyMetrics(requestLatency)
b.responseRate.Mark(1)
+
if b.brokerResponseRate != nil {
b.brokerResponseRate.Mark(1)
}
+
responseSize := int64(bytes)
b.incomingByteRate.Mark(responseSize)
if b.brokerIncomingByteRate != nil {
b.brokerIncomingByteRate.Mark(responseSize)
}
+
b.responseSize.Update(responseSize)
if b.brokerResponseSize != nil {
b.brokerResponseSize.Update(responseSize)
@@ -1080,9 +1307,11 @@
func (b *Broker) updateRequestLatencyMetrics(requestLatency time.Duration) {
requestLatencyInMs := int64(requestLatency / time.Millisecond)
b.requestLatency.Update(requestLatencyInMs)
+
if b.brokerRequestLatency != nil {
b.brokerRequestLatency.Update(requestLatencyInMs)
}
+
}
func (b *Broker) updateOutgoingCommunicationMetrics(bytes int) {
@@ -1090,13 +1319,44 @@
if b.brokerRequestRate != nil {
b.brokerRequestRate.Mark(1)
}
+
requestSize := int64(bytes)
b.outgoingByteRate.Mark(requestSize)
if b.brokerOutgoingByteRate != nil {
b.brokerOutgoingByteRate.Mark(requestSize)
}
+
b.requestSize.Update(requestSize)
if b.brokerRequestSize != nil {
b.brokerRequestSize.Update(requestSize)
}
+
+}
+
+func (b *Broker) registerMetrics() {
+ b.brokerIncomingByteRate = b.registerMeter("incoming-byte-rate")
+ b.brokerRequestRate = b.registerMeter("request-rate")
+ b.brokerRequestSize = b.registerHistogram("request-size")
+ b.brokerRequestLatency = b.registerHistogram("request-latency-in-ms")
+ b.brokerOutgoingByteRate = b.registerMeter("outgoing-byte-rate")
+ b.brokerResponseRate = b.registerMeter("response-rate")
+ b.brokerResponseSize = b.registerHistogram("response-size")
+}
+
+func (b *Broker) unregisterMetrics() {
+ for _, name := range b.registeredMetrics {
+ b.conf.MetricRegistry.Unregister(name)
+ }
+}
+
+func (b *Broker) registerMeter(name string) metrics.Meter {
+ nameForBroker := getMetricNameForBroker(name, b)
+ b.registeredMetrics = append(b.registeredMetrics, nameForBroker)
+ return metrics.GetOrRegisterMeter(nameForBroker, b.conf.MetricRegistry)
+}
+
+func (b *Broker) registerHistogram(name string) metrics.Histogram {
+ nameForBroker := getMetricNameForBroker(name, b)
+ b.registeredMetrics = append(b.registeredMetrics, nameForBroker)
+ return getOrRegisterHistogram(nameForBroker, b.conf.MetricRegistry)
}