tests/openonu-go-adapter/Voltha_ONUStateTests.robot

*** Settings ***
Documentation     Test states of ONU Go adapter
Suite Setup       Setup Suite
Suite Teardown    Teardown Suite
Test Setup        Setup
Test Teardown     Teardown
Library           Collections
Library           String
Library           OperatingSystem
Library           XML
Library           RequestsLibrary
Library           ../../libraries/DependencyLibrary.py
Resource          ../../libraries/onos.robot
Resource          ../../libraries/voltctl.robot
Resource          ../../libraries/voltha.robot
Resource          ../../libraries/utils.robot
Resource          ../../libraries/k8s.robot
Resource          ../../variables/variables.robot

*** Variables ***
${POD_NAME}       flex-ocp-cord
${KUBERNETES_CONF}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_CONFIGS_DIR}    ~/pod-configs/kubernetes-configs
#${KUBERNETES_CONFIGS_DIR}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_YAML}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
${HELM_CHARTS_DIR}    ~/helm-charts
${VOLTHA_POD_NUM}    8
${NAMESPACE}      voltha
# For below variable value, using deployment name as using grep for
# parsing radius pod name, we can also use full radius pod name
${RESTART_POD_NAME}    radius
${timeout}        180s
${of_id}          0
${logical_id}     0
${has_dataplane}    True
${external_libs}    True
${teardown_device}    True
${scripts}        ../../scripts
# Per-test logging on failure is turned off by default; set this variable to enable
${container_log_dir}    ${None}
# state to test variable, can be passed via the command line too
${state2test}    6
${testmode}    SingleState
${porttest}    True
${debugmode}    False
${logging}    False
${pausebeforecleanup}    False

*** Test Cases ***
ONU State Test
    [Documentation]    Validates the ONU Go adapter states
    [Tags]    statetest    onutest
    [Setup]    Run Keywords    Start Logging    ONUStateTest
    ...    AND    Setup Test
    Run Keyword If    ${has_dataplane}    Clean Up Linux
    Enable Device    ${olt_device_id}
    ${timeStart} =    Get Current Date
    Set Global Variable    ${timeStart}
    Run Keyword If    "${testmode}"=="SingleState"    Do ONU Single State Test
    ...    ELSE IF    "${testmode}"=="Up2State"    Do ONU Up To State Test
    ...    ELSE IF    "${testmode}"=="SingleStateTime"    Do ONU Single State Test Time
    ...    ELSE    Fail    The testmode (${testmode}) is not valid!
    [Teardown]    Run Keywords    Run Keyword If    ${logging}    Collect Logs
    ...    AND    Stop Logging    ONUStateTest

Onu Port Check
    [Documentation]    Validates the ONU Go adapter states
    ...    Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
    [Tags]    onutest
    [Setup]    Start Logging    ONUPortTest
    Run Keyword If    ${porttest}    Do Onu Port Check
    [Teardown]    Run Keywords    Run Keyword If    ${logging}    Collect Logs
    ...    AND    Stop Logging    ONUPortTest

*** Keywords ***
Setup Suite
    [Documentation]    Set up the test suite
    Common Test Suite Setup
    Run Keyword If   ${num_onus}>4    Calculate Timeout

Teardown Suite
    [Documentation]    Replaces the Suite Teardown in utils.robot.
    ...    Cleans up and checks all ONU ports disabled in ONOS.
    ...    Furthermore gives the possibility to pause the execution.
    Run Keyword If    ${pausebeforecleanup}    Import Library    Dialogs
    Run Keyword If    ${pausebeforecleanup}    Pause Execution    Press OK to continue with clean up!
    Run Keyword If    ${teardown_device}    Delete All Devices and Verify
    Wait for Ports in ONOS      ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}  0   BBSM

Setup Test
    [Documentation]    Pre-test Setup
    #test for empty device list
    Test Empty Device List
    Run Keyword If    ${has_dataplane}    Wait Until Keyword Succeeds    120s    10s    Openolt is Up
    ...    ${olt_ssh_ip}    ${olt_user}    ${olt_pass}
    Run Keyword If    ${has_dataplane}    Sleep    60s
    #create/preprovision device
    ${olt_device_id}=    Create Device    ${olt_ip}    ${OLT_PORT}
    Set Suite Variable    ${olt_device_id}
    #validate olt states
    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    PREPROVISIONED    UNKNOWN    UNKNOWN
    ...    ${olt_device_id}
    Sleep    5s

Calculate Timeout
    [Documentation]    Calculates the timeout regarding num-onus in case of more than 4 onus
    ${timeout}    Fetch From Left    ${timeout}    s
    ${timeout}=    evaluate    ${timeout}+((${num_onus}-4)*30)
    ${timeout}=    Set Variable If    (not ${debugmode}) and (${timeout}>600)    600    ${timeout}
    ${timeout}=    Catenate    SEPARATOR=    ${timeout}    s
    Set Suite Variable    ${timeout}
    #Log    \r\nTimeout: ${timeout}    INFO    console=True

Do ONU Up To State Test
    [Documentation]    This keyword performs Up2State Test
    ...    All states up to the passed have to be checked
    FOR    ${I}    IN RANGE    0    ${num_onus}
        ${src}=    Set Variable    ${hosts.src[${I}]}
        ${dst}=    Set Variable    ${hosts.dst[${I}]}
        Run Keyword If   ${state2test}>=1
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVATING    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=activating-onu
        Run Keyword If   ${state2test}>=2
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVATING    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=starting-openomci
        Run Keyword If   ${state2test}>=3
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVATING    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=discovery-mibsync-complete
        Run Keyword If   ${state2test}>=4
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVE    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=initial-mib-downloaded
        Run Keyword If   ${state2test}>=5
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVE    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=tech-profile-config-download-success
        Run Keyword If   ${state2test}>=6
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVE    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=omci-flows-pushed
    END

Do ONU Single State Test
    [Documentation]    This keyword performs SingleState Test
    ...    Only the passed state has to be checked
    FOR    ${I}    IN RANGE    0    ${num_onus}
        ${src}=    Set Variable    ${hosts.src[${I}]}
        ${dst}=    Set Variable    ${hosts.dst[${I}]}
        Run Keyword If    ${state2test}==1
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVATING    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=activating-onu
        ...    ELSE IF    ${state2test}==2
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVATING    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=starting-openomci
        ...    ELSE IF    ${state2test}==3
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVATING    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=discovery-mibsync-complete
        ...    ELSE IF    ${state2test}==4
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVE    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=initial-mib-downloaded
        ...    ELSE IF    ${state2test}==5
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVE    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=tech-profile-config-download-success
        ...    ELSE IF    ${state2test}==6
        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
        ...    Validate Device    ENABLED    ACTIVE    REACHABLE
        ...    ${src['onu']}    onu=True    onu_reason=omci-flows-pushed
        ...    ELSE    Fail    The state to test (${state2test}) is not valid!
    END

Do ONU Single State Test Time
    [Documentation]    This keyword performs SingleState Test with calculate running time
    ...    Only the passed state has to be checked and the duration each single onu adapter needed
    ...    will be calculated and printed out
    ${ListfinishedONUs}    Create List
    Set Global Variable    ${ListfinishedONUs}
    Create File    ONU_Startup_Time.txt    This file contains the startup times of all ONUs.
    ${list_onus}    Create List
    Build ONU SN List    ${list_onus}
    Run Keyword If    ${state2test}==1
    ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
    ...    Validate ONU Devices MIB State With Duration
    ...    activating-onu    ${list_onus}    ${timeStart}    print2console=True
    ...    output_file=ONU_Startup_Time.txt
    ...    ELSE IF    ${state2test}==2
    ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
    ...    Validate ONU Devices MIB State With Duration
    ...    starting-openomci    ${list_onus}    ${timeStart}    print2console=True
    ...    output_file=ONU_Startup_Time.txt
    ...    ELSE IF    ${state2test}==3
    ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
    ...    Validate ONU Devices MIB State With Duration
    ...    discovery-mibsync-complete    ${list_onus}    ${timeStart}    print2console=True
    ...    output_file=ONU_Startup_Time.txt
    ...    ELSE IF    ${state2test}==4
    ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
    ...    Validate ONU Devices MIB State With Duration
    ...    initial-mib-downloaded    ${list_onus}    ${timeStart}    print2console=True
    ...    output_file=ONU_Startup_Time.txt
    ...    ELSE IF    ${state2test}==5
    ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
    ...    Validate ONU Devices MIB State With Duration
    ...    tech-profile-config-download-success    ${list_onus}    ${timeStart}    print2console=True
    ...    output_file=ONU_Startup_Time.txt
    ...    ELSE IF    ${state2test}==6
    ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    50ms
    ...    Validate ONU Devices MIB State With Duration
    ...    omci-flows-pushed    ${list_onus}    ${timeStart}    print2console=True
    ...    output_file=ONU_Startup_Time.txt
    ...    ELSE    Fail    The state to test (${state2test}) is not valid!

Do Onu Port Check
    [Documentation]    Check that all the UNI ports show up in ONOS
    Wait for Ports in ONOS      ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}  ${num_onus}   BBSM