diff --git a/tests/dt-workflow/Voltha_DT_PODTests.robot b/tests/dt-workflow/Voltha_DT_PODTests.robot
index a1d707e..148667f 100644
--- a/tests/dt-workflow/Voltha_DT_PODTests.robot
+++ b/tests/dt-workflow/Voltha_DT_PODTests.robot
@@ -272,7 +272,7 @@
     ...    Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanityDt test was executed)
     ...    Perform disable on the OLT and validate that the pings do not succeed
     ...    Perform enable on the OLT and validate that the pings are successful
-    [Tags]    functionalDt    DisableEnableOLTDt    notready
+    [Tags]    functionalDt    DisableEnableOLTDt
     [Setup]    Start Logging    DisableEnableOLTDt
     [Teardown]    Run Keywords    Collect Logs
     ...           AND             Stop Logging    DisableEnableOLTDt
@@ -296,10 +296,13 @@
         # Remove Subscriber Access (To replicate DT workflow)
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
+        Sleep    10s
         # Delete ONU Device (To replicate DT workflow)
         Delete Device    ${onu_device_id}
+        Sleep    5s
     END
-    Sleep    15s
+    Sleep    5s
+    Run Keyword If    ${has_dataplane}    Clean Up Linux
     # Enable the OLT back and check ONU, OLT status are back to "ACTIVE"
     Enable Device    ${olt_device_id}
     Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    ENABLED    ACTIVE    REACHABLE
@@ -308,7 +311,6 @@
     ...    PON_OLT    ETHERNET_NNI
     # Waiting extra time for the ONUs to come up
     Sleep    60s
-    Run Keyword If    ${has_dataplane}    Clean Up Linux
     Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test DT
 
 Test Delete and ReAdd OLT for DT
diff --git a/tests/functional/Voltha_PODTests.robot b/tests/functional/Voltha_PODTests.robot
index c941694..67771ea 100644
--- a/tests/functional/Voltha_PODTests.robot
+++ b/tests/functional/Voltha_PODTests.robot
@@ -93,46 +93,6 @@
     Run Keyword If    ${has_dataplane}    Clean Up Linux
     Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test
 
-Test Disable and Enable OLT
-    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
-    ...    Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
-    ...    Perform disable on the OLT and validate that the pings do not succeed
-    ...    Perform enable on the OLT and validate that the pings are successful
-    [Tags]    functional    VOL-2410    DisableEnableOLT    notready
-    [Setup]    Start Logging    DisableEnableOLT
-    [Teardown]    Run Keywords    Collect Logs
-    ...           AND             Stop Logging    DisableEnableOLT
-    #Disable the OLT and verify the OLT/ONUs are disabled properly
-    ${rc}    ${output}=    Run and Return Rc and Output    ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
-    Should Be Equal As Integers    ${rc}    0
-    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    DISABLED    UNKNOWN    REACHABLE
-    ...    ${olt_serial_number}
-    FOR    ${I}    IN RANGE    0    ${num_onus}
-        ${src}=    Set Variable    ${hosts.src[${I}]}
-        ${dst}=    Set Variable    ${hosts.dst[${I}]}
-        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
-        ${onu_port}=    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
-        ...    Get ONU Port in ONOS    ${src['onu']}    ${of_id}
-        Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device    ENABLED    DISCOVERED
-        ...    UNREACHABLE    ${src['onu']}    onu=false
-        #Verify that ping fails
-        Run Keyword If    ${has_dataplane}
-        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    60s    2s
-        ...    Check Ping    False    ${dst['dp_iface_ip_qinq']}    ${src['dp_iface_name']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
-        # Remove Subscriber Access (To replicate ATT workflow)
-        Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
-        ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-    END
-    #Enable the OLT back and check ONU, OLT status are back to "ACTIVE"
-    Enable Device    ${olt_device_id}
-    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    ENABLED    ACTIVE    REACHABLE
-    ...    ${olt_serial_number}
-    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Port Types
-    ...    PON_OLT    ETHERNET_NNI
-    Run Keyword If    ${has_dataplane}    Clean Up Linux
-    Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test
-
 Test Disable and Enable ONU
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
     ...    Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
@@ -317,6 +277,48 @@
         Run Keyword and Ignore Error    Collect Logs
     END
 
+Test Disable and Enable OLT
+    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
+    ...    Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
+    ...    Perform disable on the OLT and validate that the pings do not succeed
+    ...    Perform enable on the OLT and validate that the pings are successful
+    [Tags]    functional    VOL-2410    DisableEnableOLT
+    [Setup]    Start Logging    DisableEnableOLT
+    [Teardown]    Run Keywords    Collect Logs
+    ...           AND             Stop Logging    DisableEnableOLT
+    #Disable the OLT and verify the OLT/ONUs are disabled properly
+    ${rc}    ${output}=    Run and Return Rc and Output    ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
+    Should Be Equal As Integers    ${rc}    0
+    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    DISABLED    UNKNOWN    REACHABLE
+    ...    ${olt_serial_number}
+    FOR    ${I}    IN RANGE    0    ${num_onus}
+        ${src}=    Set Variable    ${hosts.src[${I}]}
+        ${dst}=    Set Variable    ${hosts.dst[${I}]}
+        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
+        ${onu_port}=    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Get ONU Port in ONOS    ${src['onu']}    ${of_id}
+        Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device    ENABLED    DISCOVERED
+        ...    UNREACHABLE    ${src['onu']}    onu=false
+        #Verify that ping fails
+        Run Keyword If    ${has_dataplane}
+        ...    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    60s    2s
+        ...    Check Ping    False    ${dst['dp_iface_ip_qinq']}    ${src['dp_iface_name']}
+        ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
+        # Remove Subscriber Access (To replicate ATT workflow)
+        Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
+        ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
+        Sleep    10s
+    END
+    #Enable the OLT back and check ONU, OLT status are back to "ACTIVE"
+    Enable Device    ${olt_device_id}
+    Sleep    15s
+    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    ENABLED    ACTIVE    REACHABLE
+    ...    ${olt_serial_number}
+    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Port Types
+    ...    PON_OLT    ETHERNET_NNI
+    Run Keyword If    ${has_dataplane}    Clean Up Linux
+    Wait Until Keyword Succeeds    ${timeout}    5s    Perform Sanity Test
+
 Delete OLT, ReAdd OLT and Perform Sanity Test
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
     ...    Disable and Delete the OLT