[VOL-4454] Optimised test timeouts in TT Functional, Failure/Recovery and Multi-Tcont scenarios
Change-Id: I0ea21347d692e5b6a4dea13b1b4d36eba578f5a0
diff --git a/tests/tt-workflow/Voltha_TT_FailureScenarios.robot b/tests/tt-workflow/Voltha_TT_FailureScenarios.robot
index 392565d..c6694da 100755
--- a/tests/tt-workflow/Voltha_TT_FailureScenarios.robot
+++ b/tests/tt-workflow/Voltha_TT_FailureScenarios.robot
@@ -79,7 +79,7 @@
Setup
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
Power Switch Connection Suite ${web_power_switch.ip} ${web_power_switch.user} ${web_power_switch.password}
Run Keyword If ${has_dataplane} Clean Up Linux
FOR ${I} IN RANGE 0 ${num_all_onus}
@@ -88,13 +88,13 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
${of_id}= Get ofID From OLT List ${src['olt']}
${onu_device_id}= Get Device ID From SN ${src['onu']}
- ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
... Get ONU Port in ONOS ${src['onu']} ${of_id}
# Disable Power Switch
Disable Switch Outlet ${src['power_switch_port']}
# TODO: Add verification for MCAST
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 5s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
# Remove Subscriber Access (To replicate TT workflow)
@@ -104,13 +104,13 @@
# Enable Power Switch
Enable Switch Outlet ${src['power_switch_port']}
# Check ONU port is Enabled in ONOS
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
+ Wait Until Keyword Succeeds 120s 5s
... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
+ Wait Until Keyword Succeeds ${timeout} 2
... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
... volt-add-subscriber-access ${of_id} ${onu_port}
# Verify ONU state in voltha
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s Validate Device
+ Wait Until Keyword Succeeds ${timeout} 5s Validate Device
... ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
@@ -120,7 +120,7 @@
... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
... ${dst['container_name']}
... ELSE IF ${has_dataplane} and '${service_type}' == 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT MCAST one ONU ${src}
+ ... Sanity Test TT MCAST one ONU ${src}
... ${dst} ${suppressaddsubscriber}
END
@@ -138,7 +138,7 @@
Setup
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
# Reboot the OLT from the OLT CLI
FOR ${I} IN RANGE 0 ${olt_count}
${olt_user}= Get From Dictionary ${list_olts}[${I}] user
@@ -155,7 +155,7 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
# TODO: Add verification for MCAST
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 5s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
END
@@ -168,12 +168,12 @@
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s
... Check Remote System Reachability True ${olt_ssh_ip}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s
+ Wait Until Keyword Succeeds 360s 10s
... Validate OLT Device ENABLED ACTIVE
... REACHABLE ${olt_serial_number}
END
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
Verify ONU Soft Reboot for TT
[Documentation] Test the ONU Soft Reboot functionality.
@@ -187,32 +187,32 @@
Setup
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
${service_type}= Get Variable Value ${src['service_type']} "null"
${of_id}= Get ofID From OLT List ${src['olt']}
${onu_device_id}= Get Device ID From SN ${src['onu']}
- ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
... Get ONU Port in ONOS ${src['onu']} ${of_id}
Reboot Device ${onu_device_id}
# TODO: Add verification for MCAST
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds ${timeout} 2s
+ ... Wait Until Keyword Succeeds ${timeout} 5s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
# Remove Subscriber Access (To replicate TT workflow)
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
# Check ONU port is Enabled in ONOS
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
+ Wait Until Keyword Succeeds ${timeout} 5s
... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
+ Wait Until Keyword Succeeds ${timeout} 2
... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
... volt-add-subscriber-access ${of_id} ${onu_port}
# Verify ONU state in voltha
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
+ Wait Until Keyword Succeeds ${timeout} 5s Validate Device
... ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
@@ -222,11 +222,11 @@
... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
... ${dst['container_name']}
... ELSE IF ${has_dataplane} and '${service_type}' == 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT MCAST one ONU ${src}
+ ... Sanity Test TT MCAST one ONU ${src}
... ${dst} ${suppressaddsubscriber}
END
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT ${suppressaddsubscriber}
+ Perform Sanity Tests TT ${suppressaddsubscriber}
Verify OLT Soft Reboot for TT
[Documentation] Test the OLT Soft Reboot functionality.
@@ -240,7 +240,7 @@
Setup
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
# Reboot the OLT from the OLT CLI
FOR ${I} IN RANGE 0 ${olt_count}
${olt_serial_number}= Get From Dictionary ${list_olts}[${I}] sn
@@ -257,7 +257,7 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
# TODO: Add verification for MCAST
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds ${timeout} 2s
+ ... Wait Until Keyword Succeeds ${timeout} 5s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
END
@@ -270,12 +270,12 @@
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s
... Check Remote System Reachability True ${olt_ssh_ip}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s
+ Wait Until Keyword Succeeds 360s 10s
... Validate OLT Device ENABLED ACTIVE
... REACHABLE ${olt_serial_number}
END
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
Verify restart openolt-adapter container before subscriber provisioning for TT
[Documentation] Restart openolt-adapter container after VOLTHA is operational.
@@ -291,7 +291,7 @@
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
... ${olt_serial_number}
- ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s
... Get NNI Port in ONOS ${of_id}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
... Verify Default Downstream Flows are added in ONOS for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
@@ -308,7 +308,7 @@
Wait Until Keyword Succeeds ${timeout} 3s Pods Are Ready By Label ${NAMESPACE} app ${podName}
${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
Should Be Equal As Strings ${countAfterRestart} ${countBeforeRestart}
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
Log to console Pod ${podName} restarted and sanity checks passed successfully
Verify restart ofagent container after subscriber is provisioned for TT
@@ -329,7 +329,7 @@
... app ${podName} Running
Wait Until Keyword Succeeds ${timeout} 3s Pods Are Ready By Label ${NAMESPACE} app ${podName}
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test TT ${suppressaddsubscriber}
+ Perform Sanity Test TT ${suppressaddsubscriber}
${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
Log ${podStatusOutput}
${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
@@ -343,18 +343,18 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
${of_id}= Get ofID From OLT List ${src['olt']}
${onu_device_id}= Get Device ID From SN ${src['onu']}
- ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
... Get ONU Port in ONOS ${src['onu']} ${of_id}
# Verify ONU state in voltha
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s Validate Device
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
... ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=omci-flows-pushed
# Check ONU port is Disabled in ONOS
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
+ Wait Until Keyword Succeeds ${timeout} 2s
... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
# Verify Ping
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
- ... Run Keyword And Continue On Failure Check Ping True
+ ... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Check Ping True
... ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} ${src['ip']}
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
END
@@ -363,7 +363,7 @@
Wait Until Keyword Succeeds ${waitforRestart} 2s Validate Pod Status ofagent ${NAMESPACE}
... Running
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT ${suppressaddsubscriber}
+ Perform Sanity Tests TT ${suppressaddsubscriber}
Log to console Pod ${podName} restarted and sanity checks passed successfully
Sanity E2E Test for OLT/ONU on POD With Core Fail and Restart for TT
@@ -382,7 +382,7 @@
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
... ${olt_serial_number}
- ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s
... Get NNI Port in ONOS ${of_id}
END
FOR ${I} IN RANGE 0 ${num_all_onus}
@@ -422,7 +422,7 @@
Wait Until Keyword Succeeds 120s 2s Device Is Available In ONOS
... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT} ${of_id}
END
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
+ Perform Sanity Tests TT
Verify restart openonu-adapter container for TT
[Documentation] Restart openonu-adapter container after VOLTHA is operational.
@@ -436,7 +436,7 @@
Clear All Devices Then Create New Device
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test TT
+ Perform Sanity Test TT
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
@@ -444,7 +444,7 @@
Continue For Loop If '${service_type}' == 'mcast'
${ping_output_file}= Set Variable /tmp/${src['onu']}_${service_type}_ping
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Run Ping In Background ${ping_output_file} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
END
@@ -467,7 +467,7 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
Continue For Loop If '${service_type}' == 'mcast'
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Stop Ping Running In Background ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
END
@@ -478,7 +478,7 @@
Continue For Loop If '${service_type}' == 'mcast'
${ping_output_file}= Set Variable /tmp/${src['onu']}_${service_type}_ping
${ping_output}= Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Retrieve Remote File Contents ${ping_output_file} ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
Check Ping Result True ${ping_output}
@@ -498,7 +498,7 @@
Clear All Devices Then Create New Device
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test TT
+ Perform Sanity Test TT
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
@@ -506,7 +506,7 @@
Continue For Loop If '${service_type}' == 'mcast'
${ping_output_file}= Set Variable /tmp/${src['onu']}_${service_type}_ping
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Run Ping In Background ${ping_output_file} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
END
@@ -529,7 +529,7 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
Continue For Loop If '${service_type}' == 'mcast'
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Stop Ping Running In Background ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
END
@@ -540,7 +540,7 @@
Continue For Loop If '${service_type}' == 'mcast'
${ping_output_file}= Set Variable /tmp/${src['onu']}_${service_type}_ping
${ping_output}= Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Retrieve Remote File Contents ${ping_output_file} ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
Check Ping Result True ${ping_output}
@@ -560,7 +560,7 @@
Clear All Devices Then Create New Device
# Performing Sanity Test to make sure subscribers are all DHCP and pingable
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test TT
+ Perform Sanity Test TT
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
@@ -568,7 +568,7 @@
Continue For Loop If '${service_type}' == 'mcast'
${ping_output_file}= Set Variable /tmp/${src['onu']}_${service_type}_ping
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Run Ping In Background ${ping_output_file} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
END
@@ -594,7 +594,7 @@
${service_type}= Get Variable Value ${src['service_type']} "null"
Continue For Loop If '${service_type}' == 'mcast'
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Stop Ping Running In Background ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
END
@@ -605,7 +605,7 @@
Continue For Loop If '${service_type}' == 'mcast'
${ping_output_file}= Set Variable /tmp/${src['onu']}_${service_type}_ping
${ping_output}= Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds 60s 2s
+ ... Wait Until Keyword Succeeds ${timeout} 2s
... Retrieve Remote File Contents ${ping_output_file} ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
Check Ping Result True ${ping_output}
@@ -648,19 +648,17 @@
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
- ... Wait Until Keyword Succeeds ${timeout} 2s
+ ... Wait Until Keyword Succeeds ${timeout} 5s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
# Add Subscriber Access
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s
+ Wait Until Keyword Succeeds ${timeout} 5s
... Validate Device ENABLED ACTIVE
... REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT one ONU ${src}
- ... ${dst} ${suppressaddsubscriber}
+ ... Sanity Test TT one ONU ${src} ${dst} ${suppressaddsubscriber}
... ELSE IF ${has_dataplane} and '${service_type}' == 'mcast' Run Keyword And Continue On Failure
- ... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT MCAST one ONU ${src}
- ... ${dst} ${suppressaddsubscriber}
+ ... Sanity Test TT MCAST one ONU ${src} ${dst} ${suppressaddsubscriber}
END