diff --git a/tests/dt-workflow/Voltha_DT_FailureScenarios.robot b/tests/dt-workflow/Voltha_DT_FailureScenarios.robot
index f0cb66c..22d85c2 100755
--- a/tests/dt-workflow/Voltha_DT_FailureScenarios.robot
+++ b/tests/dt-workflow/Voltha_DT_FailureScenarios.robot
@@ -89,7 +89,6 @@
         # Remove Subscriber Access (To replicate DT workflow)
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         # Delete ONU Device (To replicate DT workflow)
         Delete Device    ${onu_device_id}
         Sleep    5s
@@ -189,7 +188,6 @@
     ${countBeforeRestart}=    Run    kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
     ${podName}    Set Variable     adapter-open-onu
     Wait Until Keyword Succeeds    ${timeout}    15s    Delete K8s Pods By Label    ${NAMESPACE}    app    ${podName}
-    Sleep    5s
     Wait Until Keyword Succeeds    ${timeout}    2s    Validate Pods Status By Label    ${NAMESPACE}
     ...    app    ${podName}    Running
     # Wait for 1 min after openonu adapter is restarted
@@ -219,7 +217,6 @@
     ${countBforRestart}=    Run    kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
     ${podName}    Set Variable     ${OLT_ADAPTER_APP_LABEL}
     Wait Until Keyword Succeeds    ${timeout}    15s    Delete K8s Pods By Label    ${NAMESPACE}    app    ${podName}
-    Sleep    5s
     Wait Until Keyword Succeeds    ${timeout}    2s    Validate Pods Status By Label    ${NAMESPACE}
     ...    app    ${podName}    Running
     # Wait for 1 min after openolt adapter is restarted
@@ -314,9 +311,9 @@
     ${countBforRestart}=    Run    kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
     ${podName}    Set Variable     ofagent
     Wait Until Keyword Succeeds    ${timeout}    15s    Delete K8s Pods By Label    ${NAMESPACE}    app    ${podName}
-    Sleep    60s
     Wait Until Keyword Succeeds    ${timeout}    2s    Validate Pods Status By Label    ${NAMESPACE}
     ...    app    ${podName}    Running
+    Wait Until Keyword Succeeds    ${timeout}    3s    Pods Are Ready By Label    ${NAMESPACE}    app    ${podName}
     # Performing Sanity Test to make sure subscribers are all DHCP and pingable
     Run Keyword If    ${has_dataplane}    Clean Up Linux
     Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test DT
diff --git a/tests/dt-workflow/Voltha_DT_PODTests.robot b/tests/dt-workflow/Voltha_DT_PODTests.robot
index 4f183f5..d4ed248 100644
--- a/tests/dt-workflow/Voltha_DT_PODTests.robot
+++ b/tests/dt-workflow/Voltha_DT_PODTests.robot
@@ -77,9 +77,8 @@
         ${src}=    Set Variable    ${hosts.src[${I}]}
         ${dst}=    Set Variable    ${hosts.dst[${I}]}
         Disable Switch Outlet    ${src['power_switch_port']}
-        Sleep    60s
+        Sleep    10s
         Enable Switch Outlet    ${src['power_switch_port']}
-        Sleep    60s
     END
 
 Sanity E2E Test for OLT/ONU on POD for DT
@@ -118,7 +117,6 @@
         # Remove Subscriber Access
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure
         ...    Wait Until Keyword Succeeds    60s    2s
         ...    Check Ping    False    ${dst['dp_iface_ip_qinq']}    ${src['dp_iface_name']}
@@ -149,7 +147,6 @@
         # Add Subscriber Access
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-add-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         # Verify subscriber access flows are added for the ONU port
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s
         ...    Verify Subscriber Access Flows Added For ONU DT    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${of_id}
@@ -302,10 +299,8 @@
         # Remove Subscriber Access (To replicate DT workflow)
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         # Delete ONU Device (To replicate DT workflow)
         Delete Device    ${onu_device_id}
-        Sleep    5s
     END
     Sleep    5s
     # Enable the OLT back and check ONU, OLT status are back to "ACTIVE"
@@ -313,7 +308,6 @@
         ${olt_serial_number}=    Get From Dictionary    ${olt_ids}[${I}]    sn
         ${olt_device_id}=    Get OLTDeviceID From OLT List    ${olt_serial_number}
         Enable Device    ${olt_device_id}
-        Sleep    15s
         Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    ENABLED    ACTIVE    REACHABLE
         ...    ${olt_serial_number}
         #TODO: Update for PON_OLT ETHERNET_NNI
diff --git a/tests/functional/Voltha_FailureScenarios.robot b/tests/functional/Voltha_FailureScenarios.robot
index b92cd44..4ca307e 100644
--- a/tests/functional/Voltha_FailureScenarios.robot
+++ b/tests/functional/Voltha_FailureScenarios.robot
@@ -201,10 +201,10 @@
     ${countBforRestart}=    Run    kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
     ${podName}    Set Variable     ${OLT_ADAPTER_APP_LABEL}
     Wait Until Keyword Succeeds    ${timeout}    15s    Delete K8s Pods By Label    ${NAMESPACE}    app    ${podName}
-    Sleep    5s
     Wait Until Keyword Succeeds    ${timeout}    2s    Validate Pods Status By Label    ${NAMESPACE}
     ...    app    ${podName}    Running
     # Wait for 1min after openolt adapter is restarted
+    # TBD: Need for this Sleep
     Sleep    60s
     Run Keyword If    ${has_dataplane}    Clean Up Linux
     Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test
@@ -227,7 +227,6 @@
     ${waitforRestart}    Set Variable    120s
     ${podName}    Set Variable     radius
     Wait Until Keyword Succeeds    ${timeout}    15s    Delete K8s Pods By Label    ${DEFAULTSPACE}    app    ${podName}
-    Sleep    5s
     Wait Until Keyword Succeeds    ${waitforRestart}    2s    Validate Pods Status By Label    ${DEFAULTSPACE}
     ...    app    ${podName}    Running
     FOR    ${I}    IN RANGE    0    ${num_all_onus}
@@ -350,7 +349,6 @@
     ${countBforRestart}=    Run    kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
     ${podName}    Set Variable     ofagent
     Wait Until Keyword Succeeds    ${timeout}    15s    Delete K8s Pods By Label    ${NAMESPACE}    app    ${podName}
-    Sleep    60s
     Wait Until Keyword Succeeds    ${timeout}    2s    Validate Pods Status By Label    ${NAMESPACE}
     ...    app    ${podName}    Running
     # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
@@ -413,6 +411,7 @@
     [Teardown]    Run Keywords    Collect Logs
     ...           AND             Stop Logging    ONUAdaptCrash
     # Wait for adapter to resync
+    # TBD: Need for this Sleep
     Sleep    60s
     # Restart the onu
     ${podName}    Set Variable     adapter-open-onu
@@ -435,6 +434,7 @@
     Wait Until Keyword Succeeds    ${timeout}    2s    Validate Pods Status By Label    ${NAMESPACE}
     ...    app    ${podName}    Running
     # Wait for adapter to resync
+    # TBD: Need for this Sleep
     Sleep    60s
     Run Keyword If    ${has_dataplane}    Clean Up Linux
     # Validate OLTs are active in ONOS
@@ -665,7 +665,6 @@
     ${countBforRestart}=    Run    kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
     ${podName}    Set Variable     ofagent
     Restart Pod    ${NAMESPACE}    ${podName}
-    Sleep    60s
     Wait Until Keyword Succeeds    ${waitforRestart}    2s    Validate Pod Status    ofagent    ${NAMESPACE}
     ...    Running
     FOR    ${I}    IN RANGE    0    ${num_all_onus}
diff --git a/tests/functional/Voltha_PODTests.robot b/tests/functional/Voltha_PODTests.robot
index c5a698c..dbd8462 100644
--- a/tests/functional/Voltha_PODTests.robot
+++ b/tests/functional/Voltha_PODTests.robot
@@ -77,9 +77,8 @@
         ${src}=    Set Variable    ${hosts.src[${I}]}
         ${dst}=    Set Variable    ${hosts.dst[${I}]}
         Disable Switch Outlet    ${src['power_switch_port']}
-        Sleep    60s
+        Sleep    10s
         Enable Switch Outlet    ${src['power_switch_port']}
-        Sleep    60s
     END
 
 Sanity E2E Test for OLT/ONU on POD
@@ -146,7 +145,6 @@
         ...    ${of_id}
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
         ...    Verify No Pending Flows For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
         Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure
@@ -155,7 +153,6 @@
         ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-add-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
         ...    Verify No Pending Flows For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
@@ -207,7 +204,6 @@
         ...    ${dst['container_name']}
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-add-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
         ...    Verify No Pending Flows For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
         # Verify subscriber access flows are added for the ONU port
@@ -242,14 +238,14 @@
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds   120s   2s
         ...    Verify ONU Port Is Enabled   ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${src['onu']}
         Disable Device    ${onu_device_id}
-        Sleep    10s
+        Wait Until Keyword Succeeds    ${timeout}    2s    Test Devices Disabled in VOLTHA    Id=${onu_device_id}
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
         Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure
         ...    Wait Until Keyword Succeeds    60s    2s    Check Ping
         ...    False    ${dst['dp_iface_ip_qinq']}    ${src['dp_iface_name']}
         ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
-        ...    ELSE    sleep    60s
+        ...    ELSE    Sleep    10s
         Enable Device    ${onu_device_id}
         Wait Until Keyword Succeeds    ${timeout}    2s    Verify Eapol Flows Added For ONU    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    ${onu_port}
@@ -261,7 +257,6 @@
         ...    ${ONOS_SSH_PORT}    ${onu_port}
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-add-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
         # Verify subscriber access flows are added for the ONU port
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s
         ...    Verify Subscriber Access Flows Added For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${of_id}
@@ -312,14 +307,12 @@
         # Remove Subscriber Access (To replicate ATT workflow)
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-        Sleep    10s
     END
     #Enable the OLT back and check ONU, OLT status are back to "ACTIVE"
     FOR   ${I}    IN RANGE    0    ${olt_count}
         ${olt_serial_number}=    Get From Dictionary    ${olt_ids}[${I}]    sn
         ${olt_device_id}=    Get OLTDeviceID From OLT List    ${olt_serial_number}
         Enable Device    ${olt_device_id}
-        Sleep    15s
         Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Device    ENABLED    ACTIVE    REACHABLE
         ...    ${olt_serial_number}
         #TODO: Update for PON_OLT ETHERNET_NNI