diff --git a/Jenkinsfile-voltha-build b/Jenkinsfile-voltha-build
new file mode 100644
index 0000000..21eb2d8
--- /dev/null
+++ b/Jenkinsfile-voltha-build
@@ -0,0 +1,149 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+node ("${TestNodeName}") {
+    timeout (100) {
+        try {
+            stage ("Parse deployment configuration file") {
+                sh returnStdout: true, script: "rm -rf helm-repo-tools ${configBaseDir}"
+                sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools"
+                sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+                sh returnStdout: true, script: "git clone https://github.com/ciena/kind-voltha.git"
+                deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+            }
+            stage('Clean up') {
+                timeout(10) {
+                    sh returnStdout: true, script: """
+                    export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                    cd kind-voltha/
+                    DEPLOY_K8S=no ./voltha down
+                    """
+                    timeout(5) {
+                        waitUntil {
+                            helm_deleted = sh returnStdout: true, script: """
+                            export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+                            helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
+                            """
+                            return helm_deleted.toInteger() == 0
+                        }
+                    }
+                    timeout(5) {
+                        waitUntil {
+                            kubectl_deleted = sh returnStdout: true, script: """
+                            export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+                            kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
+                            """
+                            return kubectl_deleted.toInteger() == 0
+                        }
+                    }
+                }
+            }
+            stage('Install Voltha') {
+                timeout(10) {
+                    sh returnStdout: true, script: """
+                    export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                    cd kind-voltha/
+                    EXTRA_HELM_FLAGS='-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml' WITH_RADIUS=y WITH_TP=yes DEPLOY_K8S=no INSTALL_KUBECTL=no INSTALL_HELM=no ONOS_TAG=voltha-2.1 ./voltha up
+                    """
+                }
+            }
+
+            if ( params.reinstallOlt ) {
+                stage('Reinstall OLT software') {
+                    for(int i=0; i < deployment_config.olts.size(); i++) {
+                        sh returnStdout: true, script: """
+                        sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
+                        """
+                        timeout(5) {
+                            waitUntil {
+                                olt_sw_present = sh returnStdout: true, script: """
+                                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
+                                """
+                                return olt_sw_present.toInteger() == 0
+                            }
+                        }
+                        sh returnStdout: true, script: """
+                        sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
+                        """
+                        timeout(5) {
+                            waitUntil {
+                                olt_sw_present = sh returnStdout: true, script: """
+                                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
+                                """
+                                return olt_sw_present.toInteger() == 1
+                            }
+                        }
+                        // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+                        if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
+                            sh returnStdout: true, script: """
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
+                            """
+                        }
+                    }
+                }
+                stage('Restart OLT processes') {
+                    for(int i=0; i < deployment_config.olts.size(); i++) {
+                        timeout(5) {
+                            sh returnStdout: true, script: """
+                            ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist stop' || true
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt stop' || true
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/bal_core_dist.log'
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/openolt.log'
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist start &'
+                            sleep 5
+                            sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt start &'
+                            """
+                        }
+                        timeout(15) {
+                            waitUntil {
+                                onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /var/log/openolt.log | grep \"oper_state: up\" | wc -l'"
+                                return onu_discovered.toInteger() > 0
+                            }
+                        }
+                    }
+                }
+            }
+            if ( params.configurePod ) {
+                stage('Configure ONOS Netcfg') {
+                    timeout(1) {
+                        waitUntil {
+                            sh returnStdout: true, script: """
+                            curl -w '\n%{http_code}' --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @voltha-system-tests/tests/data/${configFileName}-onos-netcfg.json
+                            """
+                        }
+                    }
+                }
+                stage('Push Tech-Profile') {
+                    timeout(1) {
+                        waitUntil {
+                            sh returnStdout: true, script: """
+                            kubectl exec -it $(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk ‘NR==1{print $1}‘) -n voltha /bin/sh
+                            cat voltha-system-tests/tests/data/${configFileName}-${techProfile}.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/xgspon/64
+                            """
+                        }
+                    }
+                }
+            }
+            currentBuild.result = 'SUCCESS'
+        } catch (err) {
+            currentBuild.result = 'FAILURE'
+            step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+            throw err
+        }
+        echo "RESULT: ${currentBuild.result}"
+    }
+}
+