[VOL-4767] Add basic test and library for BBF-Adapter
Change-Id: Ia35f7f0745e8f104aad7cd762ac6c6c6864a0706
diff --git a/tests/bbf-adapter/Voltha_BBF_Adapter_Tests.robot b/tests/bbf-adapter/Voltha_BBF_Adapter_Tests.robot
new file mode 100644
index 0000000..260d0ab
--- /dev/null
+++ b/tests/bbf-adapter/Voltha_BBF_Adapter_Tests.robot
@@ -0,0 +1,595 @@
+# Copyright 2022 - present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# FIXME Can we use the same test against BBSim and Hardware?
+
+*** Settings ***
+Suite Setup Setup Suite
+Test Setup Setup
+Test Teardown Teardown
+Suite Teardown Teardown Suite
+Library XML
+Library String
+Library DateTime
+Library Process
+Library Collections
+Library RequestsLibrary
+Library OperatingSystem
+Resource ../../libraries/bbf_adapter_utilities.robot
+Library ../../libraries/DependencyLibrary.py
+Resource ../../libraries/onos.robot
+Resource ../../libraries/voltctl.robot
+Resource ../../libraries/voltha.robot
+Resource ../../libraries/utils.robot
+Resource ../../libraries/k8s.robot
+Resource ../../variables/variables.robot
+Resource ../../libraries/power_switch.robot
+
+*** Variables ***
+${POD_NAME} flex-ocp-cord
+${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
+${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
+${HELM_CHARTS_DIR} ~/helm-charts
+${VOLTHA_POD_NUM} 8
+${NAMESPACE} voltha
+${INFRA_NAMESPACE} default
+${timeout} 60s
+${of_id} 0
+${logical_id} 0
+${has_dataplane} False
+${teardown_device} True
+${scripts} ../../scripts
+
+# Per-test logging on failure is turned off by default; set this variable to enable
+${container_log_dir} ${None}
+
+# logging flag to enable Collect Logs, can be passed via the command line too
+# example: -v logging:False
+${logging} True
+
+# Flag specific to Soak Jobs
+${SOAK_TEST} False
+${bbsim_port} 50060
+
+#Suppress the subscribe phase
+${supress_add_subscriber} False
+
+#Enable or Disable the MacLearning verifier for MacLearning ONOS APP
+${maclearningenabled} False #Not yet used but it is a placeholder
+
+*** Test Cases ***
+BBF Adapter Aggregation Test
+ [Documentation] Do a runtime test enabling all the device
+ ... and verify if VOLTHA and BBF have the same view,
+ ... with the correct translation, of the network
+ [Tags] sanityBbfAdapter
+ [Setup] Start Logging sanityBbfAdapter
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging sanityBbfAdapter
+ Run Keyword Setup ${SOAK_TEST}
+ Run Keyword If ${has_dataplane} Clean Up Linux
+ Get BBF Device Aggregation ${NAMESPACE} ${CURDIR}/data.xml ${scripts}
+ Log ${supress_add_subscriber}
+ Perform Sanity Test of BBFadapter Aggregation ./data.xml ${supress_add_subscriber}
+ Teardown Suite
+
+Test Disable and Enable ONU for BBF
+ [Documentation] Disable ONUs from the BBF Adapter (PlaceHolder with VOLTHA)
+ ... Verify all the states in voltha and in the BBF Adapter (like a compare).
+ ... Enable the ONUs from the BBF adapter, verify the enable states in voltha
+ ... and in BBF Adapter (like a compare).
+ ... It is also possible to verify a connectivity, with a no block test.
+ [Tags] bbfAdapterFunctionality disableEnableONUBBF
+ [Setup] Start Logging disableEnableONUBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging disableEnableONUBBF
+ # Create a single Setup for Multiple Test Case
+ Run Keyword Setup ${SOAK_TEST}
+ Run Keyword If ${has_dataplane} Clean Up Linux
+ # Disable, verify state, Enable and verify stato for each ONU
+ FOR ${I} IN RANGE 0 ${num_all_onus}
+ ${src}= Set Variable ${hosts.src[${I}]}
+ ${dst}= Set Variable ${hosts.dst[${I}]}
+ ${of_id}= Get ofID From OLT List ${src['olt']}
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
+ ... ${of_id} ${src['uni_id']}
+ ${onu_device_id}= Get Device ID From SN ${src['onu']}
+ # Subscribe the ONU if requested for the tests
+ Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s
+ ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
+ ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
+ # Disbale the device (actually with voltha in future with BBF Adapter)
+ Disable Device ${onu_device_id}
+ Disable Device in BBF ${onu_device_id}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Define some states that the ONU reason can be
+ ${onu_reasons}= Create List omci-flows-deleted
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} omci-admin-lock
+ Log ${onu_reasons}
+ # Verify in Voltha the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Device DISABLED UNKNOWN
+ ... REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons}
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Onu in BBF DISABLED UNKNOWN
+ ... REACHABLE ${src['onu']} ${onu_reasons}
+ # Verify if the disabling of the ONU desable also the UNI port
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
+ # Verify if there are not connectivity to the ONU
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Wait Until Keyword Succeeds ${timeout} 2s
+ ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ # Enable the device (actually with voltha in future with BBF Adapter)
+ Enable Device ${onu_device_id}
+ Enable Device in BBF ${onu_device_id}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Define some states that the ONU reason can be
+ ${onu_reasons}= Create List omci-flows-pushed
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled
+ Log ${onu_reasons}
+ # Verify in the Voltha the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Device ENABLED ACTIVE
+ ... REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons}
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Onu in BBF ENABLED ACTIVE
+ ... REACHABLE ${src['onu']} ${onu_reasons}
+ # Verify if the disabling of the ONU desable also the UNI port
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
+ # Verify if there are not connectivity to the ONU
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Wait Until Keyword Succeeds ${timeout} 2s
+ ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ END
+
+Test Disable and Enable OLT for BBF
+ [Documentation] Disable OLTs from the BBF Adapter (Placeholder with Voltha).
+ ... Verify the disable states of OLTs in Voltha and in the BBF Adapter (like a compare).
+ ... Enable the OLTs from the BBF adapter, verify the states in voltha
+ ... and in BBF Adapter (like a compare).
+ ... It is also possible to verify a connectivity, with a no block test.
+ [Tags] bbfAdapterFunctionality disableEnableOLTBBF
+ [Setup] Start Logging disableEnableOLTBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging disableEnableOLTBBF
+ # Disable each OLT and Validate it state
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ ${of_id}= Get ofID From OLT List ${olt_serial_number}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device ENABLED ACTIVE REACHABLE
+ ... ${olt_serial_number}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF ENABLED ACTIVE REACHABLE
+ ... ${olt_serial_number} ${olt_device_id}
+ # Disbale the device (actually with voltha in future with BBF Adapter)
+ Disable Device ${olt_device_id}
+ Disable Device in BBF ${olt_device_id}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device DISABLED UNKNOWN REACHABLE
+ ... ${olt_serial_number}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF DISABLED UNKNOWN REACHABLE
+ ... ${olt_serial_number} ${olt_device_id}
+ END
+ # Enable the OLT back and check OLT operstatus are back to "ACTIVE"
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ ${of_id}= Get ofID From OLT List ${olt_serial_number}
+ # Enable the device (actually with voltha in future with BBF Adapter)
+ Enable Device ${olt_device_id}
+ Enable Device in BBF ${olt_device_id}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device ENABLED ACTIVE REACHABLE
+ ... ${olt_serial_number}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF ENABLED ACTIVE REACHABLE
+ ... ${olt_serial_number} ${olt_device_id}
+ END
+
+Test Disable and Delete OLT for BBF
+ [Documentation] Disable OLTs from the BBF Adapter (PlaceHolder with Voltha)
+ ... Verify the disable state of the OLT in voltha and in the BBF Adapter,
+ ... Delete the OLTs from the BBF adapter, verify if it was done correctly in voltha
+ ... and in BBF Adapter.
+ [Tags] bbfAdapterFunctionality disableEnableOLTBBF
+ [Setup] Start Logging disableEnableOLTBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging disableEnableOLTBBF
+ # Disable and Validate OLT Device
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Disable Device ${olt_device_id}
+ Disable Device in BBF ${olt_device_id}
+ ${of_id}= Get ofID From OLT List ${olt_serial_number}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Retrive from BBF Adapter an Update XML that contain all the devices
+ ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device DISABLED UNKNOWN REACHABLE
+ ... ${olt_serial_number}
+ Validate Olt Disabled in BBF ${olt_serial_number} ${olt_device_id}
+
+ ${num_onus}= Set Variable ${list_olts}[${I}][onucount]
+ # Validate ONUs
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate ONUs After OLT Disable
+ ... ${num_onus} ${olt_serial_number}
+ Validate ONUs After OLT Disable in BBF ${olt_serial_number}
+ # Delete the device (actually with voltha in future with BBF Adapter)
+ Delete Device ${olt_device_id}
+ Delete Device in BBF ${olt_device_id}
+ # Retrive from BBF Adapter an Update XML that contain all the devices
+ ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Check that the OLT are actually removed from the system
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed
+ ... ${olt_serial_number}
+ # Check if the OLT has been removed from the system
+ Validate Device Removed in BBF ${olt_serial_number}
+ # Validate if all the ONUS connected at the OLT revomed are also been removed in VOLTHA
+ Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts}
+ ... ${olt_serial_number} ${timeout}
+ # Validate if all the ONUS connected at the OLT revomed are also been removed in BBF Adapter
+ Validate All Onus for OLT Removed in BBF ${olt_serial_number}
+ #Wait Until Keyword Succeeds ${timeout} 5s
+ #... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
+ END
+ Teardown Suite
+
+Test Delete and ReAdd OLT for BBF
+ [Documentation] Delete OLTs from the BBF Adapter (PlaceHolder with Voltha)
+ ... Verify if the OLT and ONUs connected was really delete in voltha and in the BBF Adapter.
+ ... Readd all the OLTs from the BBF adapter, verify the enable state in voltha
+ ... and in BBF Adapter and check the correct status after the readd.
+ [Tags] bbfAdapterFunctionality DeleteReAddOLTBBF
+ [Setup] Start Logging DeleteReAddOLTBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging DeleteReAddOLTBBF
+ Run Keyword Setup ${SOAK_TEST}
+ Run Keyword If ${has_dataplane} Clean Up Linux
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ # Delete the device (actually with voltha in future with BBF Adapter)
+ Delete Device ${olt_device_id}
+ Delete Device in BBF ${olt_device_id}
+ # Retrive from BBF Adapter an Update XML that contain all the devices
+ ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Check if the OLT has been removed from the system
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Device Removed ${olt_serial_number}
+ # Check if the OLT has been removed from the BBF Adapter
+ Validate Device Removed in BBF ${olt_serial_number}
+ # Validate if all the ONUS connected at the OLT revomed are also been removed in VOLTHA
+ Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts}
+ ... ${olt_serial_number} ${timeout}
+ # Validate if all the ONUS connected at the OLT revomed are also been removed in BBF Adapter
+ Validate all ONUS for OLT Removed in BBF ${olt_serial_number}
+ #Wait Until Keyword Succeeds ${timeout} 5s
+ #... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
+ END
+ # Recreate the OLTs
+ Run Keyword Setup ${SOAK_TEST}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device ENABLED ACTIVE REACHABLE
+ ... ${olt_serial_number}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF ENABLED ACTIVE REACHABLE
+ ... ${olt_serial_number} ${olt_device_id}
+ END
+ Teardown Suite
+
+Test Disable ONUs and OLT for BBF
+ [Documentation] Disable ONUs and OLTs, verify if the OLT and ONUs connected
+ ... was really disable in voltha and in the BBF Adapter.
+ ... Delete ONUs and OLTs, verify if the ONUs and OLT was really deleted
+ ... in voltha and BBF Adapter.
+ [Tags] bbfAdapterFunctionality DisableONUOLTBBF
+ [Setup] Start Logging DisableONUOLTBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging DisableONUOLTBBF
+ Run Keyword Setup ${SOAK_TEST}
+ Run Keyword If ${has_dataplane} Clean Up Linux
+ # Define some states that the ONU reason can be
+ FOR ${I} IN RANGE 0 ${num_all_onus}
+ ${src}= Set Variable ${hosts.src[${I}]}
+ ${dst}= Set Variable ${hosts.dst[${I}]}
+ ${onu_device_id}= Get Device ID From SN ${src['onu']}
+ ${of_id}= Get ofID From OLT List ${src['olt']}
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${src['olt']}
+ # Subscribe the ONU if requested for the tests
+ Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s
+ ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
+ ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
+ # Onu reasons selection
+ @{onu_reasons}= Create List omci-flows-pushed
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in the Voltha the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Device ENABLED ACTIVE
+ ... REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons}
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Onu in BBF ENABLED ACTIVE
+ ... REACHABLE ${src['onu']} ${onu_reasons}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device ENABLED ACTIVE
+ ... REACHABLE ${src['olt']}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF ENABLED ACTIVE REACHABLE
+ ... ${src['olt']} ${olt_device_id}
+ # Disbale the device (actually with voltha in future with BBF Adapter)
+ Disable Device ${onu_device_id}
+ Disable Device in BBF ${onu_device_id}
+ # Onu reasons selection
+ ${onu_reasons}= Create List omci-flows-deleted
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} omci-admin-lock
+ Log ${onu_reasons}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in the Voltha the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Device DISABLED UNKNOWN
+ ... REACHABLE ${src['onu']} ${onu_reasons} onu=True
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Onu in BBF DISABLED UNKNOWN
+ ... REACHABLE ${src['onu']} ${onu_reasons}
+ # Check if the OLT where the ONU is connected have the correct state
+ # after the disbaling one ONU connected
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device ENABLED ACTIVE
+ ... REACHABLE ${src['olt']}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF ENABLED ACTIVE REACHABLE
+ ... ${src['olt']} ${olt_device_id}
+ END
+ # Disable all OLTs and check if the state after disable are correct
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Disable Device ${olt_device_id}
+ Disable Device in BBF ${olt_device_id}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device DISABLED UNKNOWN REACHABLE
+ ... ${olt_serial_number}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF DISABLED UNKNOWN REACHABLE
+ ... ${olt_serial_number} ${olt_device_id}
+ END
+
+Delete Disabled ONUs and OLT for BBF
+ [Documentation] Continue of the before test.
+ ... Validate the Disble state of ONUs and Oltes,
+ ... Delete Disabled Onus and Disabled Olts and verify the correct
+ ... elimination of all devices from Voltha and BBF Adapter.
+ [Tags] bbfAdapterFunctionality DeleteONUOLTBBF
+ [Setup] Start Logging DeleteONUOLTBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging DeleteONUOLTBBF
+ # Validate ONUs states after OLT disable
+ ${onu_reasons}= Create List stopping-openomci
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} stopping-openomci
+ Log ${onu_reasons}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
+ ${src}= Set Variable ${hosts.src[${I}]}
+ ${dst}= Set Variable ${hosts.dst[${I}]}
+ ${onu_device_id}= Get Device ID From SN ${src['onu']}
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${src['olt']}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in the Voltha the State of the ONU
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Device DISABLED DISCOVERED
+ ... UNREACHABLE ${src['onu']} ${onu_reasons} onu=True
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Onu in BBF DISABLED DISCOVERED
+ ... UNREACHABLE ${src['onu']} ${onu_reasons}
+ # Delete the device (actually with voltha in future with BBF Adapter)
+ Delete Device ${onu_device_id}
+ Delete Device in BBF ${onu_device_id}
+ # Retrive from BBF Adapter an Update XML that contain all the devices
+ ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts}
+ Validate Device Removed in BBF ${src['onu']}
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ OLT XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify in Voltha the State of the OLT
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device DISABLED UNKNOWN
+ ... REACHABLE ${src['olt']}
+ # Verify in BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate Olt in BBF DISABLED UNKNOWN REACHABLE
+ ... ${src['olt']} ${olt_device_id}
+ END
+ # Delete all OLTs
+ # Delete All Devices and Verify
+ FOR ${I} IN RANGE 0 ${olt_count}
+ ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ # Delete the device (actually with voltha in future with BBF Adapter)
+ Delete Device ${olt_device_id}
+ Delete Device in BBF ${olt_device_id}
+ # Retrive from BBF Adapter an Update XML that contain all the devices
+ ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Check that the OLT and the ONUs are actually removed from the system
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed
+ ... ${olt_serial_number}
+ # Check if the OLT has been removed from the system
+ Validate Device Removed in BBF ${olt_serial_number}
+ # Validate if all the ONUS connected at the OLT revomed are also been removed in VOLTHA
+ Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts}
+ ... ${olt_serial_number} ${timeout}
+ # Validate if all the ONUS connected at the OLT revomed are also been removed in BBF Adapter
+ Validate all ONUS for OLT Removed in BBF ${olt_serial_number}
+ #Wait Until Keyword Succeeds ${timeout} 5s
+ #... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
+ END
+ Teardown Suite
+
+Test ONU Delete and Auto-Discovery for BBF
+ [Documentation] Validate the Autodiscory of an ONUs in case of Delete.
+ ... Delete the device and verify if them was really deleted.
+ ... Verify if all the Onus are re discovered in the correct way.
+ ... Verify the state after and before a subscription if needed.
+ ... Verify the connectivity if needed.
+ [Tags] bbfAdapterFunctionality ONUAutoDiscoveryBBF
+ [Setup] Start Logging ONUAutoDiscoveryBBF
+ [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
+ ... AND Stop Logging ONUAutoDiscoveryBBF
+ Clear All Devices Then Create New Device
+ # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
+ Run Keyword If ${has_dataplane} Clean Up Linux
+ FOR ${I} IN RANGE 0 ${num_all_onus}
+ ${src}= Set Variable ${hosts.src[${I}]}
+ ${dst}= Set Variable ${hosts.dst[${I}]}
+ ${of_id}= Get ofID From OLT List ${src['olt']}
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get ONU Port in ONOS ${src['onu']} ${of_id}
+ ${onu_device_id}= Get Device ID From SN ${src['onu']}
+ ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id}
+ # Subscribe the ONU if requested for the tests
+ Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s
+ ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
+ ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
+ # Verify ONU state in voltha
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ @{onu_reasons}= Create List omci-flows-pushed
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded
+ # Verify in the Voltha the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Validate Device ENABLED ACTIVE REACHABLE
+ ... ${src['onu']} onu=True onu_reason=${onu_reasons}
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Validate Onu in BBF ENABLED ACTIVE
+ ... REACHABLE ${src['onu']} ${onu_reasons}
+ # Delete ONU and Verify Ping Fails
+ # Delete the device (actually with voltha in future with BBF Adapter)
+ Delete Device ${onu_device_id}
+ Delete Device in BBF ${onu_device_id}
+ # Retrive from BBF Adapter an Update XML that contain all the devices
+ ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts}
+ # Verify if the ONU has been removed from the system
+ Validate Device Removed in BBF ${src['onu']}
+ Run Keyword If ${has_dataplane} Verify ping is successful except for given device
+ ... ${num_all_onus} ${src['onu']}
+ # Verify that no pending flows exist for the ONU port
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
+ # ONU Auto-Discovery
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']}
+ # Check ONU port is Enabled in ONOS
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
+ ${onu_device_id}= Get Device ID From SN ${src['onu']}
+ Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id}
+ # Re-Add Subscriber
+ Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s
+ ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
+ ... volt-add-subscriber-access ${of_id} ${onu_port}
+ # Verify that no pending flows exist for the ONU port
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port}
+ # Verify ONU state in voltha
+ # Retrive from BBF Adapter an Update XML that contain the ONUs
+ ONU XML update From BBF ${CURDIR}/data.xml ${scripts}
+ @{onu_reasons}= Create List omci-flows-pushed
+ Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Validate Device ENABLED ACTIVE REACHABLE
+ ... ${src['onu']} onu=True onu_reason=${onu_reasons}
+ # Verify in the BBF Adapter the State of the ONU
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Validate Onu in BBF ENABLED ACTIVE
+ ... REACHABLE ${src['onu']} ${onu_reasons}
+ # Verify Meters in ONOS
+ #Wait Until Keyword Succeeds ${timeout} 5s
+ #... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port}
+ Run Keyword If ${has_dataplane} Validate DHCP and Ping True
+ ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
+ ... ${dst['container_name']}
+ END
+ # Verify flows for all OLTs
+ #Wait Until Keyword Succeeds ${timeout} 5s Validate All OLT Flows
+
+
+*** Keywords ***
+Setup Suite
+ [Documentation] Set up the test suite
+ Common Test Suite Setup
+ #power_switch.robot needs it to support different vendor's power switch
+ ${switch_type}= Get Variable Value ${web_power_switch.type}
+ Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
+
+Clear All Devices Then Create New Device
+ [Documentation] Remove any devices from VOLTHA and ONOS
+ # Remove all devices from voltha and nos
+ Run Keyword Delete All Devices and Verify
+ # Execute normal test Setup Keyword
+ Run Keyword Setup ${SOAK_TEST}
\ No newline at end of file
diff --git a/tests/data/bbsim-bbf-adapter.yaml b/tests/data/bbsim-bbf-adapter.yaml
new file mode 100644
index 0000000..c6b7541
--- /dev/null
+++ b/tests/data/bbsim-bbf-adapter.yaml
@@ -0,0 +1,115 @@
+---
+
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for systems running BBSim
+
+# Change default values in tests
+workflow: TIM
+has_dataplane: false
+teardown_device: true
+ONOS_REST_PORT: 8181
+ONOS_SSH_PORT: 8101
+OLT_PORT: 50060
+
+# Actual Unused sadis.file but ready to future implementation
+# sadis.file: ../data/tim-sadis-config.json
+
+nodes:
+ -
+ ip: '127.0.0.1'
+
+olts:
+ - ip: bbsim0
+ serial: BBSIM_OLT_10
+ - ip: bbsim1
+ serial: BBSIM_OLT_11
+
+hosts:
+ src:
+ - onu: 'BBSM000a0001'
+ olt: 'BBSIM_OLT_10'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000a0001'
+ olt: 'BBSIM_OLT_10'
+ uni_tag: '836'
+ c_tag: '101'
+ s_tag: '4096'
+ service_type: 'vod'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000a0002'
+ olt: 'BBSIM_OLT_10'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000a0002'
+ olt: 'BBSIM_OLT_10'
+ uni_tag: '836'
+ c_tag: '101'
+ s_tag: '4096'
+ service_type: 'vod'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000b0001'
+ olt: 'BBSIM_OLT_11'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000b0001'
+ olt: 'BBSIM_OLT_11'
+ uni_tag: '836'
+ c_tag: '101'
+ s_tag: '4096'
+ service_type: 'vod'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000b0002'
+ olt: 'BBSIM_OLT_11'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000b0002'
+ olt: 'BBSIM_OLT_11'
+ uni_tag: '836'
+ c_tag: '101'
+ s_tag: '4096'
+ service_type: 'vod'
+ uni_id: 1
+ tp_id: '64'
+
+ dst:
+ - ip: null
+ - ip: null
+ - ip: null
+ - ip: null
+ - ip: null
+ - ip: null
+ - ip: null
+ - ip: null
diff --git a/tests/data/bbsim-bbf-adapter_addDelete_tests.yaml b/tests/data/bbsim-bbf-adapter_addDelete_tests.yaml
new file mode 100644
index 0000000..83e5cf9
--- /dev/null
+++ b/tests/data/bbsim-bbf-adapter_addDelete_tests.yaml
@@ -0,0 +1,79 @@
+---
+
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for systems running BBSim
+
+# Change default values in tests
+workflow: TIM
+has_dataplane: false
+teardown_device: true
+ONOS_REST_PORT: 8181
+ONOS_SSH_PORT: 8101
+OLT_PORT: 50060
+
+# Actual Unused sadis.file but ready to future implementation
+# sadis.file: ../data/tim-sadis-config.json
+
+nodes:
+ -
+ ip: '127.0.0.1'
+
+olts:
+ - ip: bbsim0
+ serial: BBSIM_OLT_10
+ - ip: bbsim1
+ serial: BBSIM_OLT_11
+
+hosts:
+ src:
+ - onu: 'BBSM000a0001'
+ olt: 'BBSIM_OLT_10'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000a0002'
+ olt: 'BBSIM_OLT_10'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000b0001'
+ olt: 'BBSIM_OLT_11'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+ - onu: 'BBSM000b0002'
+ olt: 'BBSIM_OLT_11'
+ uni_tag: '835'
+ c_tag: '100'
+ s_tag: '4096'
+ service_type: 'hsia'
+ uni_id: 1
+ tp_id: '64'
+
+ dst:
+ - ip: null
+ - ip: null
+ - ip: null
+ - ip: null