diff --git a/tests/data/bbsim-kind-dt.yaml b/tests/data/bbsim-kind-dt.yaml
new file mode 100644
index 0000000..a5abc4d
--- /dev/null
+++ b/tests/data/bbsim-kind-dt.yaml
@@ -0,0 +1,44 @@
+---
+
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for kind-voltha running BBSim
+
+# Change default values in tests
+has_dataplane: false
+external_libs: false
+teardown_device: true
+ONOS_REST_PORT: 8181
+ONOS_SSH_PORT: 8101
+OLT_PORT: 50060
+
+nodes:
+  -
+    ip: '127.0.0.1'
+
+olts:
+  -
+    ip: bbsim.voltha.svc
+    serial: BBSIM_OLT_0
+
+hosts:
+  src:
+    - onu: 'BBSM00000001'
+
+  dst:
+    - ip: null
+
+sadis:
+  file: ${CURDIR}/../../data/onos-sadis-bbsim-dt.json
diff --git a/tests/data/onos-sadis-bbsim-dt.json b/tests/data/onos-sadis-bbsim-dt.json
new file mode 100644
index 0000000..03a7eac
--- /dev/null
+++ b/tests/data/onos-sadis-bbsim-dt.json
@@ -0,0 +1,72 @@
+{
+  "org.opencord.sadis": {
+    "sadis": {
+      "integration": {
+        "cache": {
+          "enabled": false,
+          "maxsize": 50,
+          "ttl": "PT0m"
+        }
+      },
+      "entries": [
+        {
+          "id": "BBSIM_OLT_0",
+          "hardwareIdentifier": "0f:f1:ce:c0:ff:ee",
+          "nasId": "BBSIMOLT000",
+          "uplinkPort": 1048576
+        },
+        {
+          "id": "BBSM00000001-1",
+          "nasPortId": "BBSM00000001-1",
+          "circuitId": "BBSM00000001-1",
+          "remoteId": "BBSM00000001-1",
+          "uniTagList": [
+            {
+              "ponCTag": 4095,
+              "ponSTag": 900,
+              "technologyProfileId": 64,
+              "downstreamBandwidthProfile": "Default",
+              "upstreamBandwidthProfile": "Default",
+              "isDhcpRequired": true
+            }
+          ]
+        },
+        {
+          "id": "BBSM00000002-1",
+          "nasPortId": "BBSM00000002-1",
+          "circuitId": "BBSM00000002-1",
+          "remoteId": "BBSM00000002-1",
+          "uniTagList": [
+            {
+              "ponCTag": 4095,
+              "ponSTag": 901,
+              "technologyProfileId": 64,
+              "downstreamBandwidthProfile": "Default",
+              "upstreamBandwidthProfile": "Default",
+              "isDhcpRequired": true
+            }
+          ]
+        }
+      ]
+    },
+    "bandwidthprofile": {
+      "integration": {
+        "cache": {
+          "enabled": true,
+          "maxsize": 40,
+          "ttl": "PT1m"
+        }
+      },
+      "entries": [
+        {
+          "id": "Default",
+          "cir": 1000000,
+          "cbs": 1001,
+          "eir": 1002,
+          "ebs": 1003,
+          "air": 1004
+        }
+      ]
+    }
+  }
+}
diff --git a/tests/dt-workflow/Voltha_DT_PODTests.robot b/tests/dt-workflow/Voltha_DT_PODTests.robot
new file mode 100644
index 0000000..51acfbc
--- /dev/null
+++ b/tests/dt-workflow/Voltha_DT_PODTests.robot
@@ -0,0 +1,86 @@
+# Copyright 2017 - present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# FIXME Can we use the same test against BBSim and Hardware?
+
+*** Settings ***
+Documentation     Test various end-to-end scenarios
+Suite Setup       Setup Suite
+Test Setup        Setup
+Test Teardown     Teardown
+Suite Teardown    Teardown Suite
+Library           Collections
+Library           String
+Library           OperatingSystem
+Library           XML
+Library           RequestsLibrary
+Library           ../../libraries/DependencyLibrary.py
+Resource          ../../libraries/onos.robot
+Resource          ../../libraries/voltctl.robot
+Resource          ../../libraries/voltha.robot
+Resource          ../../libraries/utils.robot
+Resource          ../../libraries/k8s.robot
+Resource          ../../variables/variables.robot
+
+*** Variables ***
+${POD_NAME}       flex-ocp-cord
+${KUBERNETES_CONF}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_CONFIGS_DIR}    ~/pod-configs/kubernetes-configs
+#${KUBERNETES_CONFIGS_DIR}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_YAML}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
+${HELM_CHARTS_DIR}    ~/helm-charts
+${VOLTHA_POD_NUM}    8
+${NAMESPACE}      voltha
+# For below variable value, using deployment name as using grep for
+# parsing radius pod name, we can also use full radius pod name
+${RESTART_POD_NAME}    radius
+${timeout}        60s
+${of_id}          0
+${logical_id}     0
+${has_dataplane}    True
+${external_libs}    True
+${teardown_device}    False
+${scripts}        ../../scripts
+
+# Per-test logging on failure is turned off by default; set this variable to enable
+${container_log_dir}    ${None}
+
+*** Test Cases ***
+Sanity E2E Test for OLT/ONU on POD for DT
+    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
+    ...    Validate successful DHCP/E2E ping (no EAPOL and DHCP flows) for the tech profile that is used
+    ...    Traffic sent with same vlan from different RGs,
+    ...    should reach the NNI port on the OLT with the expected double tagged vlan ids
+    ...    Inner vlans from the RG should not change
+    [Tags]    sanityDt    bbsim    test1
+    [Setup]    Run Keywords    Announce Message    START TEST SanityTestDt
+    ...        AND             Start Logging    SanityTestDt
+    ...        AND             Setup
+    [Teardown]    Run Keywords    Collect Logs
+    ...           AND             Stop Logging    SanityTestDt
+    ...           AND             Announce Message    END TEST SanityTestDt
+    Run Keyword If    ${has_dataplane}    Clean Up Linux
+    Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test DT
+
+*** Keywords ***
+Setup Suite
+    [Documentation]    Set up the test suite
+    Common Test Suite Setup
+
+Clear All Devices Then Create New Device
+    [Documentation]    Remove any devices from VOLTHA and ONOS
+    # Remove all devices from voltha and nos
+    Delete All Devices and Verify
+    # Execute normal test Setup Keyword
+    Setup
+