diff --git a/Makefile b/Makefile
index 1d75059..f2b7085 100644
--- a/Makefile
+++ b/Makefile
@@ -35,6 +35,7 @@
 
 # Robot config
 ROBOT_SANITY_SINGLE_PON_FILE    ?= $(ROOT_DIR)/tests/data/bbsim-kind.yaml
+ROBOT_SANITY_DT_SINGLE_PON_FILE    ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt.yaml
 ROBOT_FAIL_SINGLE_PON_FILE      ?= $(ROOT_DIR)/tests/data/bbsim-kind.yaml
 ROBOT_SANITY_MULT_PON_FILE      ?= $(ROOT_DIR)/tests/data/bbsim-kind-2x2.yaml
 ROBOT_SCALE_SINGLE_PON_FILE     ?= $(ROOT_DIR)/tests/data/bbsim-kind-16.yaml
@@ -45,6 +46,12 @@
 # for backwards compatibility
 sanity-kind: sanity-single-kind
 
+# target to invoke DT Workflow Sanity
+sanity-kind-dt: ROBOT_MISC_ARGS += -i sanityDt $(ROBOT_DEBUG_LOG_OPT)
+sanity-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE)
+sanity-kind-dt: ROBOT_FILE := Voltha_DT_PODTests.robot
+sanity-kind-dt: voltha-dt-test
+
 functional-single-kind: ROBOT_MISC_ARGS += -i sanity -i functional $(ROBOT_DEBUG_LOG_OPT)
 functional-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE)
 functional-single-kind: bbsim-kind
@@ -106,6 +113,11 @@
 	cd tests/functional ;\
 	robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE)
 
+voltha-dt-test: vst_venv
+	source ./$</bin/activate ; set -u ;\
+	cd tests/dt-workflow ;\
+	robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE)
+
 # self-test, lint, and setup targets
 
 # virtualenv for the robot tools
diff --git a/README.md b/README.md
index 4c46faf..37e2aa6 100644
--- a/README.md
+++ b/README.md
@@ -92,6 +92,9 @@
 See all available versions in [Docker
 voltha](https://hub.docker.com/u/voltha/).
 
+### DT Workflow
+If you want to install voltha for the DT Workflow, add `WITH_RADIUS=n WITH_EAPOL=n WITH_DHCP=n WITH_IGMP=n CONFIG_SADIS=n` flags in the command.
+
 ### Debug the kind-voltha installation
 
 If you meet any issues when you set up the VOLTHA testing environment by
@@ -112,6 +115,13 @@
 make -C voltha-system-tests sanity-kind
 ```
 
+### DT Workflow
+To run the sanity tests for the DT Workflow, use `sanity-kind-dt` as the make target.
+```bash
+git clone https://github.com/opencord/voltha-system-tests
+make -C voltha-system-tests sanity-kind-dt
+```
+
 This test execution will generate three report files in
 `voltha-system-tests/tests/sanity` (`output.xml`, `report.html`, `log.html`).
 View the `report.html` page in a browser to analyze the results.
diff --git a/libraries/utils.robot b/libraries/utils.robot
index 9143fc1..5d1d2a2 100644
--- a/libraries/utils.robot
+++ b/libraries/utils.robot
@@ -186,6 +186,51 @@
         Run Keyword and Ignore Error    Collect Logs
     END
 
+Perform Sanity Test DT
+    [Documentation]    This keyword performs Sanity Test Procedure for DT Workflow
+    ...    Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD
+    ...    This keyword can be used to call in any other tests where sanity check is required
+    ...    and avoids duplication of code.
+    ${of_id}=    Wait Until Keyword Succeeds    ${timeout}    15s    Validate OLT Device in ONOS    ${olt_serial_number}
+    Set Global Variable    ${of_id}
+    FOR    ${I}    IN RANGE    0    ${num_onus}
+        ${src}=    Set Variable    ${hosts.src[${I}]}
+        ${dst}=    Set Variable    ${hosts.dst[${I}]}
+        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
+        ${onu_port}=    Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Get ONU Port in ONOS    ${src['onu']}    ${of_id}
+        # Check ONU port is Enabled in ONOS
+        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds   120s   2s
+        ...    Verify ONU Port Is Enabled   ${k8s_node_ip}    ${ONOS_SSH_PORT}    ${onu_port}
+        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2
+        ...    Execute ONOS CLI Command    ${k8s_node_ip}    ${ONOS_SSH_PORT}
+        ...    volt-add-subscriber-access ${of_id} ${onu_port}
+        # Verify ONU state in voltha
+        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device
+        ...    ENABLED    ACTIVE    REACHABLE
+        ...    ${src['onu']}    onu=True    onu_reason=omci-flows-pushed
+        # TODO: Yet to Verify on the Physical POD
+        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate DHCP and Ping    True
+        ...    True    ${src['dp_iface_name']}    ${src['s_tag']}    ${src['c_tag']}    ${dst['dp_iface_ip_qinq']}
+        ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
+        ...    ${dst['dp_iface_name']}    ${dst['ip']}    ${dst['user']}    ${dst['pass']}    ${dst['container_type']}
+        ...    ${dst['container_name']}
+        Run Keyword and Ignore Error    Get Device Output from Voltha    ${onu_device_id}
+        Run Keyword and Ignore Error    Collect Logs
+    END
+    # Verify VOLTHA Flows (TODO: Add verification for ONOS Flows)
+    # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP
+    ${olt_flows}=    Evaluate    2 * ${num_onus} + 1
+    # Number of per ONU Flows equals 2 (one each for downstream and upstream)
+    ${onu_flows}=    Set Variable    2
+    Run Keyword    Wait Until Keyword Succeeds    ${timeout}    5s    Validate OLT Flows    ${olt_flows}
+    ${List_ONU_Serial}    Create List
+    Set Suite Variable    ${List_ONU_Serial}
+    Build ONU SN List    ${List_ONU_Serial}
+    Log    ${List_ONU_Serial}
+    Run Keyword    Wait Until Keyword Succeeds    ${timeout}    5s    Validate ONU Flows
+    ...    ${List_ONU_Serial}    ${onu_flows}
+
 Setup
     [Documentation]    Pre-test Setup
     #test for empty device list
diff --git a/libraries/voltctl.robot b/libraries/voltctl.robot
index 00c85c4..e0883d7 100644
--- a/libraries/voltctl.robot
+++ b/libraries/voltctl.robot
@@ -209,7 +209,7 @@
     END
 
 Validate Device Flows
-    [Arguments]    ${device_id}    ${test}=${EMPTY}
+    [Arguments]    ${device_id}    ${flow_count}=${EMPTY}
     [Documentation]    Parses the output of voltctl device flows <device_id> and expects flow count > 0
     ${rc}    ${output}=    Run and Return Rc and Output    ${VOLTCTL_CONFIG}; voltctl device flows ${device_id} -o json
     Should Be Equal As Integers    ${rc}    0
@@ -217,22 +217,24 @@
     Log    ${jsondata}
     ${length}=    Get Length    ${jsondata}
     Log    'Number of flows = ' ${length}
-    Run Keyword If    '${test}' == '${EMPTY}'    Should Be True    ${length} > 0
+    Run Keyword If    '${flow_count}' == '${EMPTY}'    Should Be True    ${length} > 0
     ...    Number of flows for ${device_id} was 0
-    ...    ELSE    Should Be True    ${length} == ${test}
-    ...    Number of flows for ${device_id} was not ${test}
+    ...    ELSE    Should Be True    ${length} == ${flow_count}
+    ...    Number of flows for ${device_id} was not ${flow_count}
 
 Validate OLT Flows
-    [Documentation]    Parses the output of voltctl device flows ${olt_device_id} and expects flow count > 0
-    Validate Device Flows    ${olt_device_id}
+    [Arguments]    ${flow_count}=${EMPTY}
+    [Documentation]    Parses the output of voltctl device flows ${olt_device_id}
+    ...    and expects flow count == ${flow_count}
+    Validate Device Flows    ${olt_device_id}    ${flow_count}
 
 Validate ONU Flows
-    [Arguments]    ${List_ONU_Serial}    ${test}
+    [Arguments]    ${List_ONU_Serial}    ${flow_count}=${EMPTY}
     [Documentation]    Parses the output of voltctl device flows for each ONU SN listed in ${List_ONU_Serial}
-    ...    and expects flow count == 0
+    ...    and expects flow count == ${flow_count}
     FOR    ${serial_number}    IN    @{List_ONU_Serial}
         ${onu_dev_id}=    Get Device ID From SN    ${serial_number}
-        Validate Device Flows    ${onu_dev_id}    ${test}
+        Validate Device Flows    ${onu_dev_id}    ${flow_count}
     END
 
 Validate Logical Device
diff --git a/tests/data/bbsim-kind-dt.yaml b/tests/data/bbsim-kind-dt.yaml
new file mode 100644
index 0000000..a5abc4d
--- /dev/null
+++ b/tests/data/bbsim-kind-dt.yaml
@@ -0,0 +1,44 @@
+---
+
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Automated deployment configuration for kind-voltha running BBSim
+
+# Change default values in tests
+has_dataplane: false
+external_libs: false
+teardown_device: true
+ONOS_REST_PORT: 8181
+ONOS_SSH_PORT: 8101
+OLT_PORT: 50060
+
+nodes:
+  -
+    ip: '127.0.0.1'
+
+olts:
+  -
+    ip: bbsim.voltha.svc
+    serial: BBSIM_OLT_0
+
+hosts:
+  src:
+    - onu: 'BBSM00000001'
+
+  dst:
+    - ip: null
+
+sadis:
+  file: ${CURDIR}/../../data/onos-sadis-bbsim-dt.json
diff --git a/tests/data/onos-sadis-bbsim-dt.json b/tests/data/onos-sadis-bbsim-dt.json
new file mode 100644
index 0000000..03a7eac
--- /dev/null
+++ b/tests/data/onos-sadis-bbsim-dt.json
@@ -0,0 +1,72 @@
+{
+  "org.opencord.sadis": {
+    "sadis": {
+      "integration": {
+        "cache": {
+          "enabled": false,
+          "maxsize": 50,
+          "ttl": "PT0m"
+        }
+      },
+      "entries": [
+        {
+          "id": "BBSIM_OLT_0",
+          "hardwareIdentifier": "0f:f1:ce:c0:ff:ee",
+          "nasId": "BBSIMOLT000",
+          "uplinkPort": 1048576
+        },
+        {
+          "id": "BBSM00000001-1",
+          "nasPortId": "BBSM00000001-1",
+          "circuitId": "BBSM00000001-1",
+          "remoteId": "BBSM00000001-1",
+          "uniTagList": [
+            {
+              "ponCTag": 4095,
+              "ponSTag": 900,
+              "technologyProfileId": 64,
+              "downstreamBandwidthProfile": "Default",
+              "upstreamBandwidthProfile": "Default",
+              "isDhcpRequired": true
+            }
+          ]
+        },
+        {
+          "id": "BBSM00000002-1",
+          "nasPortId": "BBSM00000002-1",
+          "circuitId": "BBSM00000002-1",
+          "remoteId": "BBSM00000002-1",
+          "uniTagList": [
+            {
+              "ponCTag": 4095,
+              "ponSTag": 901,
+              "technologyProfileId": 64,
+              "downstreamBandwidthProfile": "Default",
+              "upstreamBandwidthProfile": "Default",
+              "isDhcpRequired": true
+            }
+          ]
+        }
+      ]
+    },
+    "bandwidthprofile": {
+      "integration": {
+        "cache": {
+          "enabled": true,
+          "maxsize": 40,
+          "ttl": "PT1m"
+        }
+      },
+      "entries": [
+        {
+          "id": "Default",
+          "cir": 1000000,
+          "cbs": 1001,
+          "eir": 1002,
+          "ebs": 1003,
+          "air": 1004
+        }
+      ]
+    }
+  }
+}
diff --git a/tests/dt-workflow/Voltha_DT_PODTests.robot b/tests/dt-workflow/Voltha_DT_PODTests.robot
new file mode 100644
index 0000000..51acfbc
--- /dev/null
+++ b/tests/dt-workflow/Voltha_DT_PODTests.robot
@@ -0,0 +1,86 @@
+# Copyright 2017 - present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# FIXME Can we use the same test against BBSim and Hardware?
+
+*** Settings ***
+Documentation     Test various end-to-end scenarios
+Suite Setup       Setup Suite
+Test Setup        Setup
+Test Teardown     Teardown
+Suite Teardown    Teardown Suite
+Library           Collections
+Library           String
+Library           OperatingSystem
+Library           XML
+Library           RequestsLibrary
+Library           ../../libraries/DependencyLibrary.py
+Resource          ../../libraries/onos.robot
+Resource          ../../libraries/voltctl.robot
+Resource          ../../libraries/voltha.robot
+Resource          ../../libraries/utils.robot
+Resource          ../../libraries/k8s.robot
+Resource          ../../variables/variables.robot
+
+*** Variables ***
+${POD_NAME}       flex-ocp-cord
+${KUBERNETES_CONF}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_CONFIGS_DIR}    ~/pod-configs/kubernetes-configs
+#${KUBERNETES_CONFIGS_DIR}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_YAML}    ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
+${HELM_CHARTS_DIR}    ~/helm-charts
+${VOLTHA_POD_NUM}    8
+${NAMESPACE}      voltha
+# For below variable value, using deployment name as using grep for
+# parsing radius pod name, we can also use full radius pod name
+${RESTART_POD_NAME}    radius
+${timeout}        60s
+${of_id}          0
+${logical_id}     0
+${has_dataplane}    True
+${external_libs}    True
+${teardown_device}    False
+${scripts}        ../../scripts
+
+# Per-test logging on failure is turned off by default; set this variable to enable
+${container_log_dir}    ${None}
+
+*** Test Cases ***
+Sanity E2E Test for OLT/ONU on POD for DT
+    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
+    ...    Validate successful DHCP/E2E ping (no EAPOL and DHCP flows) for the tech profile that is used
+    ...    Traffic sent with same vlan from different RGs,
+    ...    should reach the NNI port on the OLT with the expected double tagged vlan ids
+    ...    Inner vlans from the RG should not change
+    [Tags]    sanityDt    bbsim    test1
+    [Setup]    Run Keywords    Announce Message    START TEST SanityTestDt
+    ...        AND             Start Logging    SanityTestDt
+    ...        AND             Setup
+    [Teardown]    Run Keywords    Collect Logs
+    ...           AND             Stop Logging    SanityTestDt
+    ...           AND             Announce Message    END TEST SanityTestDt
+    Run Keyword If    ${has_dataplane}    Clean Up Linux
+    Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test DT
+
+*** Keywords ***
+Setup Suite
+    [Documentation]    Set up the test suite
+    Common Test Suite Setup
+
+Clear All Devices Then Create New Device
+    [Documentation]    Remove any devices from VOLTHA and ONOS
+    # Remove all devices from voltha and nos
+    Delete All Devices and Verify
+    # Execute normal test Setup Keyword
+    Setup
+