| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # robot test functions |
| |
| *** Settings *** |
| Documentation Library for various utilities |
| Library SSHLibrary |
| Library String |
| Library DateTime |
| Library Process |
| Library Collections |
| Library RequestsLibrary |
| Library OperatingSystem |
| Library CORDRobot |
| Library ImportResource resources=CORDRobot |
| |
| *** Keywords *** |
| Check CLI Tools Configured |
| [Documentation] Tests that use 'voltctl' and 'kubectl' should execute this keyword in suite setup |
| # check voltctl and kubectl configured |
| ${voltctl_rc}= Run And Return RC voltctl device list |
| ${kubectl_rc}= Run And Return RC kubectl get pods |
| Run Keyword If ${voltctl_rc} != 0 or ${kubectl_rc} != 0 FATAL ERROR |
| ... VOLTCTL and KUBECTL not configured. Please configure before executing tests. |
| |
| Send File To Onos |
| [Documentation] Send the content of the file to Onos to selected section of configuration |
| ... using Post Request |
| [Arguments] ${CONFIG_FILE} ${section} |
| ${Headers}= Create Dictionary Content-Type application/json |
| ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE} |
| Log ${Headers} |
| Log ${File_Data} |
| ${resp}= Post Request ONOS |
| ... /onos/v1/network/configuration/${section} headers=${Headers} data=${File_Data} |
| Should Be Equal As Strings ${resp.status_code} 200 |
| |
| Common Test Suite Setup |
| [Documentation] Setup the test suite |
| Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG} |
| Set Global Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG} |
| ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip") |
| ${ONOS_REST_IP}= Get Environment Variable ONOS_REST_IP ${k8s_node_ip} |
| ${ONOS_SSH_IP}= Get Environment Variable ONOS_SSH_IP ${k8s_node_ip} |
| Set Global Variable ${ONOS_REST_IP} |
| Set Global Variable ${ONOS_SSH_IP} |
| ${k8s_node_user}= Evaluate ${nodes}[0].get("user") |
| ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass") |
| Check CLI Tools Configured |
| ${onos_auth}= Create List karaf karaf |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH} |
| ${olt_ip}= Evaluate ${olts}[0].get("ip") |
| ${olt_ssh_ip}= Evaluate ${olts}[0].get("sship") |
| ${olt_user}= Evaluate ${olts}[0].get("user") |
| ${olt_pass}= Evaluate ${olts}[0].get("pass") |
| ${olt_serial_number}= Evaluate ${olts}[0].get("serial") |
| ${num_onus}= Get Length ${hosts.src} |
| ${num_onus}= Convert to String ${num_onus} |
| #send sadis file to onos |
| ${sadis_file}= Get Variable Value ${sadis.file} |
| Log To Console \nSadis File:${sadis_file} |
| Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/ |
| Set Suite Variable ${num_onus} |
| Set Suite Variable ${olt_serial_number} |
| Set Suite Variable ${olt_ip} |
| Set Suite Variable ${olt_ssh_ip} |
| Set Suite Variable ${olt_user} |
| Set Suite Variable ${olt_pass} |
| @{container_list}= Create List adapter-open-olt adapter-open-onu voltha-api-server |
| ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent |
| Set Suite Variable ${container_list} |
| ${datetime}= Get Current Date |
| Set Suite Variable ${datetime} |
| |
| WPA Reassociate |
| [Documentation] Executes a particular wpa_cli reassociate, which performs force reassociation |
| [Arguments] ${iface} ${ip} ${user} ${pass}=${None} |
| ... ${container_type}=${None} ${container_name}=${None} |
| #Below for loops are used instead of sleep time, to execute reassociate command and check status |
| FOR ${i} IN RANGE 70 |
| ${output}= Login And Run Command On Remote System |
| ... wpa_cli -i ${iface} reassociate ${ip} ${user} |
| ... ${pass} ${container_type} ${container_name} |
| ${passed}= Run Keyword And Return Status Should Contain ${output} OK |
| Exit For Loop If ${passed} |
| END |
| Should Be True ${passed} Status does not contain 'SUCCESS' |
| FOR ${i} IN RANGE 70 |
| ${output}= Login And Run Command On Remote System |
| ... wpa_cli -i ${iface} status | grep SUCCESS ${ip} ${user} |
| ... ${pass} ${container_type} ${container_name} |
| ${passed}= Run Keyword And Return Status Should Contain ${output} SUCCESS |
| Exit For Loop If ${passed} |
| END |
| Should Be True ${passed} Status does not contain 'SUCCESS' |
| |
| Validate Authentication After Reassociate |
| [Arguments] ${auth_pass} ${iface} ${ip} ${user} ${pass}=${None} |
| ... ${container_type}=${None} ${container_name}=${None} |
| [Documentation] |
| ... Executes a particular reassociate request on the RG using wpa_cli. |
| ... auth_pass determines if authentication should pass |
| ${wpa_log}= Catenate SEPARATOR=. /tmp/wpa ${iface} log |
| ${output}= Login And Run Command On Remote System truncate -s 0 ${wpa_log}; cat ${wpa_log} |
| ... ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Log ${output} |
| Should Not Contain ${output} authentication completed successfully |
| WPA Reassociate ${iface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Remote File Contents True ${wpa_log} ${iface}.*authentication completed successfully |
| ... ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Run Keyword If '${auth_pass}' == 'False' Sleep 20s |
| Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log |
| ... ${iface}.*authentication completed successfully ${ip} ${user} ${pass} |
| ... ${container_type} ${container_name} |
| |
| Send Dhclient Request To Release Assigned IP |
| [Arguments] ${iface} ${ip} ${user} ${path_dhcpleasefile} ${pass}=${None} |
| ... ${container_type}=${None} ${container_name}=${None} |
| [Documentation] Executes a dhclient with option to release ip against a particular interface on the RG (src) |
| ${result}= Login And Run Command On Remote System |
| ... dhclient -nw -r ${iface} && rm ${path_dhcpleasefile}/dhclient.* ${ip} ${user} |
| ... ${pass} ${container_type} ${container_name} |
| Log ${result} |
| #Should Contain ${result} DHCPRELEASE |
| [Return] ${result} |
| |
| Check Remote File Contents For WPA Logs |
| [Arguments] ${file_should_exist} ${file} ${pattern} ${ip} ${user} ${pass}=${None} |
| ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$ |
| [Documentation] Checks for particular pattern count in a file |
| ${result}= Login And Run Command On Remote System |
| ... cat ${file} | grep '${pattern}' | wc -l ${ip} ${user} ${pass} |
| ... ${container_type} ${container_name} ${prompt} |
| [Return] ${result} |
| |
| Perform Sanity Test |
| [Documentation] This keyword performs Sanity Test Procedure |
| ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD |
| ... This keyword can be used to call in any other tests where sanity check is required |
| ... and avoids duplication of code. |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| Set Global Variable ${of_id} |
| ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get NNI Port in ONOS ${of_id} |
| Set Global Variable ${nni_port} |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword and Ignore Error Collect Logs |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| # Verify EAPOL flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # Perform Authentication |
| ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=. |
| ... /tmp/wpa ${src['dp_iface_name']} log |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True |
| ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} ${wpa_log} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify that no pending flows exist for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| |
| Perform Sanity Test DT |
| [Documentation] This keyword performs Sanity Test Procedure for DT Workflow |
| ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD |
| ... This keyword can be used to call in any other tests where sanity check is required |
| ... and avoids duplication of code. |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| Set Global Variable ${of_id} |
| ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get NNI Port in ONOS ${of_id} |
| Set Global Variable ${nni_port} |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652) |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| # Verify ONOS Flows |
| # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream) |
| ${onos_flows_count}= Evaluate 4 * ${num_onus} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onos_flows_count} |
| # Verify VOLTHA Flows |
| # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP |
| ${olt_flows}= Evaluate 2 * ${num_onus} + 1 |
| # Number of per ONU Flows equals 2 (one each for downstream and upstream) |
| ${onu_flows}= Set Variable 2 |
| Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows} |
| ${List_ONU_Serial} Create List |
| Set Suite Variable ${List_ONU_Serial} |
| Build ONU SN List ${List_ONU_Serial} |
| Log ${List_ONU_Serial} |
| Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
| ... ${List_ONU_Serial} ${onu_flows} |
| |
| Perform Sanity Test TT |
| [Documentation] This keyword performs Sanity Test Procedure for TT Workflow |
| ... Sanity test performs dhcp and pings (without EAPOL and DHCP flows) for all the ONUs given for the POD |
| ... This keyword can be used to call in any other tests where sanity check is required |
| ... and avoids duplication of code. |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${service_type}= Get Variable Value ${src['service_type']} "null" |
| Run Keyword IF '${service_type}' != 'mcast' Sanity Test TT one ONU ${src} ${dst} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| Run Keyword and Ignore Error Collect Logs |
| |
| Sanity Test TT one ONU |
| [Documentation] This keyword performs sanity test for a single ONU for TT workflow |
| ... Tests for one ONU |
| ... Assertions apply to HSIA, VoD, VoIP services |
| [Arguments] ${src} ${dst} |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| Set Global Variable ${of_id} |
| ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get NNI Port in ONOS ${of_id} |
| Set Global Variable ${nni_port} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| Sleep 30s |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # TODO: Yet to Verify on the GPON based Physical POD (VOL-2652) |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| Run Keyword and Ignore Error Collect Logs |
| |
| Perform Sanity Test TT MCAST |
| [Documentation] This keyword performs Sanity Test Procedure for TT Workflow |
| ... Adds subscribers |
| ... Validates for MCAST |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${service_type}= Get Variable Value ${src['service_type']} "null" |
| Run Keyword IF '${service_type}' == 'mcast' Sanity Test TT MCAST one ONU ${src} |
| ... ${dst} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| Run Keyword and Ignore Error Collect Logs |
| |
| Sanity Test TT MCAST one ONU |
| [Documentation] This keyword performs sanity test for a single ONU for TT workflow |
| ... Tests for one ONU |
| ... Assertions apply to MCAST services |
| [Arguments] ${src} ${dst} |
| # Check for iperf and jq tools |
| ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf jq |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} |
| ... ${src['container_name']} |
| Pass Execution If ${rc} != 0 Skipping test: iperf / jq not found on the RG |
| |
| #Reset the IP on the interface |
| ${output}= Login And Run Command On Remote System sudo ifconfig ${src['dp_iface_name']} 0 |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| # Kill iperf on BNG |
| ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System |
| ... sudo kill -9 `pidof iperf` |
| ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| |
| # Setup RG for Multi-cast test |
| ${output}= Login And Run Command On Remote System |
| ... sudo ifconfig ${src['dp_iface_name']} ${src['mcast_rg']} up ; sudo kill -9 `pidof iperf` |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ${output}= Login And Run Command On Remote System |
| ... sudo ip route add ${src['mcast_grp_subnet_mask']} dev ${src['dp_iface_name']} scope link |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| |
| # Perform operations for adding subscriber |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| Set Global Variable ${of_id} |
| ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get NNI Port in ONOS ${of_id} |
| Set Global Variable ${nni_port} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| Sleep 30s |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| |
| # Setup iperf on the BNG |
| ${server_output}= Login And Run Command On Remote System |
| ... sudo iperf -c ${dst['dp_iface_ip_qinq']} -u -T 32 -t 60 -i 1 & |
| ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| |
| # Setup iperf on the RG |
| ${rg_output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s |
| ... Login And Run Command On Remote System |
| ... rm -rf /tmp/rg_output ; sudo iperf -s -u -B ${dst['dp_iface_ip_qinq']} -i 1 -D >> /tmp/rg_output |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Log ${rg_output} |
| Sleep 60s |
| ${output}= Run Keyword and Continue On Failure Wait Until Keyword Succeeds 90s 5s |
| ... Login And Run Command On Remote System |
| ... cat /tmp/rg_output | grep KBytes |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Log ${output} |
| Should Contain ${output} KBytes |
| |
| # Kill iperf on BNG |
| ${rg_output}= Run Keyword and Continue On Failure Login And Run Command On Remote System |
| ... sudo kill -9 `pidof iperf` |
| ... ${dst['bng_ip']} ${dst['bng_user']} ${dst['bng_pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| |
| # Kill iperf on the RG |
| ${output}= Run Keyword and Continue On Failure Login And Run Command On Remote System |
| ... sudo kill -9 `pidof iperf` |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| |
| |
| Setup |
| [Documentation] Pre-test Setup |
| #test for empty device list |
| Test Empty Device List |
| #Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s Openolt is Up |
| #... ${olt_ip} ${olt_user} ${olt_pass} |
| Run Keyword If ${has_dataplane} Sleep 230s |
| #create/preprovision device |
| ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT} |
| Set Suite Variable ${olt_device_id} |
| #validate olt states |
| Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id} |
| Sleep 5s |
| Enable Device ${olt_device_id} |
| Wait Until Keyword Succeeds 380s 5s |
| ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number} |
| ${logical_id}= Get Logical Device ID From SN ${olt_serial_number} |
| Set Suite Variable ${logical_id} |
| |
| Validate ONUs After OLT Disable |
| [Documentation] Validates the ONUs state in Voltha, ONUs port state in ONOS |
| ... and that pings do not succeed After corresponding OLT is Disabled |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device ENABLED DISCOVERED |
| ... UNREACHABLE ${src['onu']} onu=True onu_reason=stopping-openomci |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify ONU Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| |
| Delete All Devices and Verify |
| [Documentation] Remove any devices from VOLTHA and ONOS |
| # Clear devices from VOLTHA |
| Disable Devices In Voltha Root=true |
| Sleep 5s |
| Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true |
| Delete Devices In Voltha Root=true |
| Run Keyword If ${has_dataplane} Sleep 30s |
| Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List |
| # Clear devices from ONOS |
| #Remove All Devices From ONOS |
| #... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT} |
| |
| Teardown |
| [Documentation] kills processes and cleans up interfaces on src+dst servers |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| |
| Teardown Suite |
| [Documentation] Clean up device if desired |
| Run Keyword If ${teardown_device} Delete All Devices and Verify |
| |
| Delete Device and Verify |
| [Documentation] Disable -> Delete devices via voltctl and verify its removed |
| ${olt_device_id}= Get Device ID From SN ${olt_serial_number} |
| ${rc} ${output}= Run and Return Rc and Output |
| ... ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id} |
| Should Be Equal As Integers ${rc} 0 |
| Sleep 5s |
| Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number} |
| ${rc} ${output}= Run and Return Rc and Output |
| ... ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id} |
| Run Keyword If ${has_dataplane} Sleep 50s |
| Should Be Equal As Integers ${rc} 0 |
| Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id} |
| |
| Repeat Sanity Test |
| [Documentation] This keyword performs Sanity Test Procedure |
| ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD |
| ... This keyword can be used to call in any other tests where sanity check is required |
| ... with wpa reassociation |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| Set Global Variable ${of_id} |
| FOR ${I} IN RANGE 0 ${num_onus} |
| Run Keyword and Ignore Error Collect Logs |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Check ONU port is Enabled in ONOD |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| # Verify EAPOL flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # Perform Authentication |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Validate Authentication After Reassociate |
| ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Validate DHCP and Ping True True |
| ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure |
| ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| |
| Collect Logs |
| [Documentation] Collect Logs from voltha and onos cli for various commands |
| Run Keyword and Ignore Error Get Device List from Voltha |
| Run Keyword and Ignore Error Get Device Output from Voltha ${olt_device_id} |
| Run Keyword and Ignore Error Get Logical Device Output from Voltha ${logical_id} |
| Get ONOS Status ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| |
| Verify ping is succesful except for given device |
| [Arguments] ${num_onus} ${exceptional_onu_id} |
| [Documentation] Checks that ping for all the devices are successful except the given ONU. |
| ${pingStatus} Set Variable True |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${pingStatus} Run Keyword If '${onu_device_id}' == '${exceptional_onu_id}' Set Variable False |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping ${pingStatus} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| |
| Echo Message to OLT Logs |
| [Arguments] ${message} |
| [Documentation] Echoes ${message} into the OLT logs |
| Wait Until Keyword Succeeds 180s 10s Execute Remote Command |
| ... printf '%s\n' '' '' '${message}' '' >> /var/log/openolt.log |
| ... ${olt_ssh_ip} ${olt_user} ${olt_pass} |
| Wait Until Keyword Succeeds 180s 10s Execute Remote Command |
| ... printf '%s\n' '' '' '${message}' '' >> /var/log/dev_mgmt_daemon.log |
| ... ${olt_ssh_ip} ${olt_user} ${olt_pass} |
| |
| Start Logging |
| [Arguments] ${label} |
| [Documentation] Start logging for test ${label} |
| ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n default |
| ... -n voltha cwd=${container_log_dir} stdout=${label}-combined.log |
| Set Test Variable ${kail_process} |
| Run Keyword If ${has_dataplane} Echo Message to OLT Logs START ${label} |
| |
| Stop Logging |
| [Arguments] ${label} |
| [Documentation] End logging for test; remove logfile if test passed |
| Run sync |
| Run Keyword If ${kail_process} Terminate Process ${kail_process} |
| ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}" |
| ... Join Path ${container_log_dir} ${label}-combined.log |
| Run Keyword If Test Passed Run Keyword If "${test_logfile}" != "${None}" Remove File ${test_logfile} |
| Run Keyword If ${has_dataplane} Echo Message to OLT Logs END ${label} |
| |
| Clean Up Linux |
| [Documentation] Kill processes and clean up interfaces on src+dst servers |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Execute Remote Command sudo pkill wpa_supplicant ${src['ip']} |
| ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Execute Remote Command sudo pkill dhclient ${src['ip']} |
| ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Execute Remote Command sudo pkill mausezahn ${src['ip']} |
| ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Run Keyword If '${dst['ip']}' != '${None}' Execute Remote Command pkill dhcpd |
| ... ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} ${dst['container_name']} |
| Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']} |
| ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host |
| ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']} |
| ... ${dst['container_type']} ${dst['container_name']} |
| ${bng_ip}= Get Variable Value ${dst['noroot_ip']} |
| ${bng_user}= Get Variable Value ${dst['noroot_user']} |
| ${bng_pass}= Get Variable Value ${dst['noroot_pass']} |
| Run Keyword If "${bng_ip}" != "${NONE}" and "${bng_user}" != "${NONE}" and "${bng_pass}" != "${NONE}" |
| ... Execute Remote Command sudo pkill mausezahn ${bng_ip} ${bng_user} ${bng_pass} |
| ... ${dst['container_type']} ${dst['container_name']} |
| END |
| |
| Clean WPA Process |
| [Documentation] Kills wpa_supplicant processes only for all RGs |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']} |
| ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| |
| Should Be Larger Than |
| [Documentation] Verify that value_1 is > value_2 |
| [Arguments] ${value_1} ${value_2} |
| Run Keyword If ${value_1} <= ${value_2} |
| ... Fail The value ${value_1} is not larger than ${value_2} |
| |
| Should Be Larger Than Or Equal To |
| [Documentation] Verify that value_1 is >= value_2 |
| [Arguments] ${value_1} ${value_2} |
| Run Keyword If ${value_1} < ${value_2} |
| ... Fail The value ${value_1} is not larger than or equal to ${value_2} |
| |
| Should Be Float |
| [Documentation] Verify that value is a floating point number type |
| [Arguments] ${value} |
| ${type} Evaluate type(${value}).__name__ |
| Should Be Equal ${type} float |
| |
| Should Be Newer Than Or Equal To |
| [Documentation] Compare two RFC3339 dates |
| [Arguments] ${value_1} ${value_2} |
| ${unix_v1} Parse RFC3339 ${value_1} |
| ${unix_v2} Parse RFC3339 ${value_2} |
| Run Keyword If ${unix_v1} < ${unix_v2} |
| ... Fail The value ${value_1} is not newer than or equal to ${value_2} |
| |
| Get Current Time |
| [Documentation] Return the current time in RFC3339 format |
| ${output}= Run date -u +"%FT%T%:z" |
| [return] ${output} |
| |
| Parse RFC3339 |
| [Documentation] Parse an RFC3339 timestamp |
| [Arguments] ${dateStr} |
| ${rc} ${output}= Run and Return Rc and Output date --date="${dateStr}" "+%s" |
| Should Be Equal As Numbers ${rc} 0 |
| [return] ${output} |
| |
| Get Bandwidth Profile Name For Given Subscriber |
| [Arguments] ${subscriber_id} ${stream_type}=upstreamBandwidthProfile |
| [Documentation] Keyword to get the bandwidth details of the given subscriber |
| ${bandwidth_profile_output}= Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-programmed-subscribers | grep ${subscriber_id} |
| @{bandwidth_profile_array}= Split String ${bandwidth_profile_output} , |
| Log ${bandwidth_profile_array} |
| FOR ${value} IN @{bandwidth_profile_array} |
| @{row_value}= Split String ${value} = |
| ${bandwidth_profile_name}= Set Variable If '${row_value[0]}' == ' ${stream_type}' |
| ... ${row_value[1]} |
| ${bandwidth_profile_name}= Convert To String ${bandwidth_profile_name} |
| Run Keyword If "${bandwidth_profile_name}" != "None" Exit For Loop |
| END |
| Log ${bandwidth_profile_name} |
| [Return] ${bandwidth_profile_name} |
| |
| Execute Remote Command |
| [Documentation] SSH into a remote host and execute a command on the bare host or in a container. |
| ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot. |
| [Arguments] ${cmd} ${ip} ${user} ${pass}=${None} |
| ... ${container_type}=${None} ${container_name}=${None} ${timeout}=${None} |
| ${conn_id}= SSHLibrary.Open Connection ${ip} |
| Run Keyword If '${pass}' != '${None}' |
| ... SSHLibrary.Login ${user} ${pass} |
| ... ELSE |
| ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa |
| ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command |
| ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}' |
| ${stdout} ${stderr} ${rc}= Run Keyword If '${container_type}' == 'LXC' |
| ... SSHLibrary.Execute Command lxc exec ${container_name} -- ${cmd} |
| ... return_stderr=True return_rc=True timeout=${timeout} |
| ... ELSE IF '${container_type}' == 'K8S' |
| ... SSHLibrary.Execute Command kubectl -n ${namespace} exec ${container_name} -- ${cmd} |
| ... return_stderr=True return_rc=True timeout=${timeout} |
| ... ELSE |
| ... SSHLibrary.Execute Command ${cmd} return_stderr=True return_rc=True timeout=${timeout} |
| |
| Log ${stdout} |
| Log ${stderr} |
| Log ${rc} |
| SSHLibrary.Close Connection |
| [Return] ${stdout} ${stderr} ${rc} |
| |
| Start Remote Command |
| [Documentation] SSH into a remote host and execute a command on the bare host or in a container. |
| ... This replaces and simplifies the Login And Run Command On Remote System keyword in CORDRobot. |
| [Arguments] ${cmd} ${ip} ${user} ${pass}=${None} |
| ... ${container_type}=${None} ${container_name}=${None} |
| ${conn_id}= SSHLibrary.Open Connection ${ip} |
| Run Keyword If '${pass}' != '${None}' |
| ... SSHLibrary.Login ${user} ${pass} |
| ... ELSE |
| ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa |
| ${namespace}= Run Keyword If '${container_type}' == 'K8S' SSHLibrary.Execute Command |
| ... kubectl get pods --all-namespaces | grep ${container_name} | awk '{print $1}' |
| Run Keyword If '${container_type}' == 'LXC' |
| ... SSHLibrary.Start Command lxc exec ${container_name} -- ${cmd} |
| ... ELSE IF '${container_type}' == 'K8S' |
| ... SSHLibrary.Start Command kubectl -n ${namespace} exec ${container_name} -- ${cmd} |
| ... ELSE |
| ... SSHLibrary.Start Command ${cmd} |
| # It seems that closing the connection immediately will sometimes kill the command |
| Sleep 1s |
| SSHLibrary.Close Connection |
| |
| Run Iperf3 Test Client |
| [Arguments] ${src} ${server} ${args} |
| [Documentation] Login to ${src} and run the iperf3 client against ${server} using ${args}. |
| ... Return a Dictionary containing the results of the test. |
| ${output} ${stderr} ${rc}= Execute Remote Command iperf3 -J -c ${server} ${args} | jq -M -c '.' |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Should Be Equal As Integers ${rc} 0 |
| ${object}= Evaluate json.loads(r'''${output}''') json |
| [Return] ${object} |
| |
| Run Iperf Test Client for MCAST |
| [Arguments] ${src} ${server} ${args} |
| [Documentation] Login to ${src} and run the iperf client against ${server} using ${args}. |
| ... Return a Dictionary containing the results of the test. |
| ${output} ${stderr} ${rc}= Execute Remote Command sudo iperf -c ${server} ${args} | jq -M -c '.' |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Should Be Equal As Integers ${rc} 0 |
| ${object}= Evaluate json.loads(r'''${output}''') json |
| [Return] ${object} |
| |
| RestoreONUs |
| [Documentation] Restore all connected ONUs |
| [Arguments] ${num_onus} |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${container_type}= Get Variable Value ${src['container_type']} "null" |
| ${container_name}= Get Variable Value ${src['container_name']} "null" |
| ${onu_type}= Get Variable Value ${src['onu_type']} "null" |
| #Get ens6f0 from ens6f0.22 |
| ${if_name}= Replace String Using Regexp ${src['dp_iface_name']} \\..* \ |
| Run Keyword IF '${onu_type}' == 'alpha' AlphaONURestoreDefault ${src['ip']} ${src['user']} |
| ... ${src['pass']} ${if_name} admin admin ${container_type} ${container_name} |
| END |
| |
| AlphaONURestoreDefault |
| [Documentation] Restore the Alpha ONU to factory setting |
| [Arguments] ${rg_ip} ${rg_user} ${rg_pass} ${onu_ifname} |
| ... ${onu_user} ${onu_pass} ${container_type}=${None} ${container_name}=${None} |
| ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 192.168.1.3/24 |
| ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name} |
| ${cmd} Catenate |
| ... (echo open "192.168.1.1"; sleep 1; |
| ... echo "${onu_user}"; sleep 1; |
| ... echo "${onu_pass}"; sleep 1; |
| ... echo "restoredefault"; sleep 1) | telnet |
| ${output}= Login And Run Command On Remote System ${cmd} |
| ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name} |
| Log To Console ${output} |
| ${output}= Login And Run Command On Remote System sudo ifconfig ${onu_ifname} 0 |
| ... ${rg_ip} ${rg_user} ${rg_pass} ${container_type} ${container_name} |
| |
| Create traffic with each pbit and capture at other end |
| [Documentation] Generates upstream traffic using Mausezahn tool |
| ... with each pbit and validates reception at other end using tcpdump |
| [Arguments] ${target_ip} ${target_iface} ${src_iface} |
| ... ${packet_count} ${packet_type} ${target_port} ${vlan} ${tcpdump_filter} |
| ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| FOR ${pbit} IN RANGE 8 |
| Execute Remote Command sudo pkill mausezahn |
| ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| ${var1}= Set Variable sudo mausezahn ${src_iface} -B ${target_ip} -c ${packet_count} -d 100m |
| ${var2}= Set Variable -t ${packet_type} "dp=${target_port}" -p 1472 -Q ${pbit}:${vlan} |
| ${cmd}= Set Variable ${var1} ${var2} |
| Start Remote Command ${cmd} ${src_ip} ${src_user} ${src_pass} |
| ... ${src_container_type} ${src_container_name} |
| ${output} ${stderr} ${rc}= Execute Remote Command |
| ... sudo tcpdump -l -U -c 30 -i ${target_iface} -e ${tcpdump_filter} |
| ... ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| ... timeout=30 seconds |
| Execute Remote Command sudo pkill mausezahn |
| ... ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| # VOL-3262: I'm seeing untagged downstream traffic at RG for pbit 0. According to Girish this is |
| # incorrect behavior. Simplify the following check when VOL-3262 is resolved. |
| Run Keyword If ${pbit}==0 and "${tcpdump_filter}"=="udp" |
| ... Should Match Regexp ${output} \\.${target_port}: UDP, |
| ... ELSE Should Match Regexp ${output} , p ${pbit},.*\\.${target_port}: UDP, |
| END |