[VOL-2282]
Run robot tests with Python 3
- Remove HTTP and database robot libraries that aren't used
- Make robot lint treat warnings as errors
- Reformat robot tests to pass lint, and other minor fixes
- Lint/reformat of python code
- Add yaml and json linting
- Clean up Makefile
- Assume the KUBECONFIG and VOLTCONFIG env vars are defined
Change-Id: Ibf0a6b525802ed907efc38b34c8e3b99b2044bf1
diff --git a/tests/functional/Voltha_PODTests.robot b/tests/functional/Voltha_PODTests.robot
index 737cc39..49e9edb 100644
--- a/tests/functional/Voltha_PODTests.robot
+++ b/tests/functional/Voltha_PODTests.robot
@@ -11,7 +11,6 @@
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
-
# FIXME Can we use the same test against BBSim and Hardware?
*** Settings ***
@@ -41,17 +40,17 @@
${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
${HELM_CHARTS_DIR} ~/helm-charts
${VOLTHA_POD_NUM} 8
-${NAMESPACE} voltha
+${NAMESPACE} voltha
# For below variable value, using deployment name as using grep for
# parsing radius pod name, we can also use full radius pod name
-${RESTART_POD_NAME} radius
+${RESTART_POD_NAME} radius
${timeout} 60s
${of_id} 0
${logical_id} 0
${has_dataplane} True
${external_libs} True
${teardown_device} False
-${scripts} ../../scripts
+${scripts} ../../scripts
*** Test Cases ***
Sanity E2E Test for OLT/ONU on POD
@@ -60,7 +59,7 @@
[Tags] sanity test1
[Teardown] NONE
Run Keyword If ${has_dataplane} Clean Up Linux
- Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
+ Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Run Keyword and Ignore Error Collect Logs
Test Disable and Enable ONU
@@ -71,59 +70,59 @@
[Tags] functional DisableEnableONU released
[Setup] None
[Teardown] None
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
-
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id}
Disable Device ${onu_device_id}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s Check Ping False ${dst['dp_iface_ip_qinq']}
- ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s
+ ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Enable Device ${onu_device_id}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
... Validate Subscriber DHCP Allocation ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s Check Ping True ${dst['dp_iface_ip_qinq']}
- ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
- Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s
+ ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
+ Run Keyword and Ignore Error Collect Logs
END
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword and Ignore Error Collect Logs
Test Subscriber Delete and Add
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Assuming that all the ONUs are authenticated/DHCP/pingable
- ... Delete a subscriber and validate that the pings do not succeed
+ ... Delete a subscriber and validate that the pings do not succeed
... Re-add the subscriber and validate that the pings are successful
[Tags] functional SubAddDelete released
[Setup] None
[Teardown] None
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
-
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id}
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Sleep 10s
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s Check Ping False ${dst['dp_iface_ip_qinq']}
- ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s
+ ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Sleep 10s
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
... Validate Subscriber DHCP Allocation ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s Check Ping True ${dst['dp_iface_ip_qinq']}
- ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
- Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s
+ ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
+ Run Keyword and Ignore Error Collect Logs
END
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword and Ignore Error Collect Logs
Check OLT/ONU Authentication After Radius Pod Restart
[Documentation] After radius restart, triggers reassociation, checks status and
@@ -132,50 +131,48 @@
... teardown from previous test or uncomment 'Teardown None'.
... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
[Tags] functional RadiusRestart released
- [Setup] None
- [Teardown] None
+ [Setup] None
+ [Teardown] None
Wait Until Keyword Succeeds ${timeout} 15s Restart Pod ${NAMESPACE} ${RESTART_POD_NAME}
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
-
-
${onu_device_id}= Get Device ID From SN ${src['onu']}
- ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
- ... ${of_id}
- Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication After Reassociate
- ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get ONU Port in ONOS ${src['onu']} ${of_id}
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify Eapol Flows Added For ONU ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Validate Authentication After Reassociate True ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
- ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
- ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
- ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
- ... ${dst['container_name']}
+ ... ${ONOS_SSH_PORT} ${onu_port}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Validate DHCP and Ping True True ${src['dp_iface_name']}
+ ... ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
+ ... ${src['ip']} ${src['user']} ${src['pass']}
+ ... ${src['container_type']} ${src['container_name']}
+ ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']}
+ ... ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
... Validate Subscriber DHCP Allocation ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
+ Run Keyword and Ignore Error Collect Logs
END
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword and Ignore Error Collect Logs
Check DHCP attempt fails when subscriber is not added
[Documentation] Validates when removed subscriber access, DHCP attempt, ping fails and
... when again added subscriber access, DHCP attempt, ping succeeds
- ... Assuming that test1 or sanity test was executed where all the ONUs are authenticated/DHCP/pingable
+ ... Assuming that test1 or sanity test was executed where all the ONUs are authenticated/DHCP/pingable
[Tags] functional SubsRemoveDHCP released
[Setup] None
[Teardown] None
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
-
- ${onu_device_id}= Get Device ID From SN ${src['onu']}
+ ${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id}
Run Keyword And Ignore Error Login And Run Command On Remote System killall dhclient ${src['ip']}
@@ -184,13 +181,14 @@
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
- Sleep 5s
+ Sleep 5s
Run Keyword And Ignore Error Login And Run Command On Remote System ps -ef | grep dhclient ${src['ip']}
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
- Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds ${timeout} 2s
- ... Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
- ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
- Run Keyword And Ignore Error Login And Run Command On Remote System ifconfig | grep -A 10 ens ${src['ip']}
+ Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds ${timeout} 2s
+ ... Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
+ ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ Run Keyword And Ignore Error Login And Run Command On Remote System
+ ... ifconfig | grep -A 10 ens ${src['ip']}
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping False
... False ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
@@ -210,11 +208,11 @@
Check ONU adapter crash not forcing authentication again
[Documentation] After ONU adapter restart, checks wpa log for 'authentication started'
- ... message count to make sure auth not started again and validates EAP status and ping.
+ ... message count to make sure auth not started again and validates EAP status and ping.
... Assuming that test1 or sanity was executed where all the ONUs are authenticated/DHCP/pingable
[Tags] functional ONUAdaptCrash notready
- [Setup] None
- [Teardown] None
+ [Setup] None
+ [Teardown] None
@{before_list}= Create List
@{after_list}= Create List
FOR ${I} IN RANGE 0 ${num_onus}
@@ -226,7 +224,7 @@
${before}= Run Keyword If ${has_dataplane} Check Remote File Contents For WPA Logs
... True /tmp/wpa.log authentication started ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
- Append To List ${before_list} ${before}
+ Append To List ${before_list} ${before}
END
Wait Until Keyword Succeeds ${timeout} 15s Restart Pod ${NAMESPACE} adapter-open-onu
Wait Until Keyword Succeeds ${timeout} 2s Validate Pod Status ${podName} ${NAMESPACE}
@@ -240,34 +238,34 @@
${after}= Run Keyword If ${has_dataplane} Check Remote File Contents For WPA Logs
... True /tmp/wpa.log authentication started ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
- Append To List ${after_list} ${after}
- ${output}= Run Keyword If ${has_dataplane} Login And Run Command On Remote System
- ... wpa_cli status | grep SUCCESS ${src['ip']} ${src['user']} ${src['pass']}
- ... ${src['container_type']} ${src['container_name']}
- Should Contain ${output} SUCCESS
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s Check Ping
+ Append To List ${after_list} ${after}
+ ${output}= Run Keyword If ${has_dataplane} Login And Run Command On Remote System
+ ... wpa_cli status | grep SUCCESS ${src['ip']} ${src['user']} ${src['pass']}
+ ... ${src['container_type']} ${src['container_name']}
+ Should Contain ${output} SUCCESS
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Wait Until Keyword Succeeds 60s 2s Check Ping
... True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} ${src['ip']} ${src['user']}
- ... ${src['pass']} ${src['container_type']} ${src['container_name']}
+ ... ${src['pass']} ${src['container_type']} ${src['container_name']}
END
Lists Should Be Equal ${after_list} ${before_list}
Log ${after_list}
Log ${before_list}
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword and Ignore Error Collect Logs
Test Disable and Enable ONU scenario for ATT workflow
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
... Perform disable on the ONUs, call volt-remove-subscriber and validate that the pings do not succeed
- ... Perform enable on the ONUs, authentication check, volt-add-subscriber-access and validate that the pings are successful
+ ... Perform enable on the ONUs, authentication check, volt-add-subscriber-access and
+ ... validate that the pings are successful
... VOL-2284
[Tags] functional ATT_DisableEnableONU
[Setup] None
#[Teardown] None
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
-
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id}
@@ -275,17 +273,20 @@
Sleep 5s
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s Check Ping False ${dst['dp_iface_ip_qinq']}
- ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Wait Until Keyword Succeeds 60s 2s Check Ping
+ ... False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
+ ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
... ELSE sleep 60s
Enable Device ${onu_device_id}
Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${k8s_node_ip}
... ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication After Reassociate
- ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Validate Authentication After Reassociate True
+ ... ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} ${onu_port}
+ ... ${ONOS_SSH_PORT} ${onu_port}
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Sleep 10s
@@ -307,17 +308,17 @@
[Setup] NONE
[Teardown] NONE
${waitforRestart} Set Variable 120s
- ${podStatusOutput}= Run ${KUBECTL_CONFIG};kubectl get pods -n ${NAMESPACE}
+ ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
Log ${podStatusOutput}
- ${countBforRestart}= Run ${KUBECTL_CONFIG};kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
+ ${countBforRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
${podName} Set Variable adapter-open-olt
Restart Pod ${NAMESPACE} ${podName}
Wait Until Keyword Succeeds ${waitforRestart} 2s Validate Pod Status ${podName} ${NAMESPACE}
... Running
Repeat Sanity Test
- ${podStatusOutput}= Run ${KUBECTL_CONFIG};kubectl get pods -n ${NAMESPACE}
+ ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE}
Log ${podStatusOutput}
- ${countAfterRestart}= Run ${KUBECTL_CONFIG};kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
+ ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l
Should Be Equal As Strings ${countAfterRestart} ${countBforRestart}
Log to console Pod ${podName} restarted and sanity checks passed successfully
@@ -365,22 +366,20 @@
[Documentation] Deploys an device instance and waits for it to authenticate. After
... authentication is successful the rw-core deployment is scaled to 0 instances to
... simulate a POD crash. The test then scales the rw-core back to a single instance
- ... and configures ONOS for access. The test succeeds if the device is able to
+ ... and configures ONOS for access. The test succeeds if the device is able to
... complete the DHCP sequence.
[Tags] bbsim rwcore-restart
[Setup] Clear All Devices Then Create New Device
${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Set Global Variable ${of_id}
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id}
-
# Bring up the device and verify it authenticates
- Wait Until Keyword Succeeds ${timeout} 5s Validate Device ENABLED ACTIVE REACHABLE
+ Wait Until Keyword Succeeds ${timeout} 5s Validate Device ENABLED ACTIVE REACHABLE
... ${onu_device_id} onu=True onu_reason=omci-flows-pushed
Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${k8s_node_ip}
... ${ONOS_SSH_PORT} ${onu_port}
@@ -388,27 +387,26 @@
... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} ${onu_port}
-
+ ... ${ONOS_SSH_PORT} ${onu_port}
# Scale down the rw-core deployment to 0 PODs and once confirmed, scale it back to 1
Scale K8s Deployment voltha voltha-rw-core 0
Wait Until Keyword Succeeds ${timeout} 2s Pod Does Not Exist voltha voltha-rw-core
# Ensure the ofagent POD goes "not-ready" as expected
- Wait Until keyword Succeeds ${timeout} 2s Check Expected Available Deployment Replicas voltha voltha-ofagent 0
+ Wait Until keyword Succeeds ${timeout} 2s
+ ... Check Expected Available Deployment Replicas voltha voltha-ofagent 0
# Scale up the core deployment and make sure both it and the ofagent deployment are back
Scale K8s Deployment voltha voltha-rw-core 1
- Wait Until Keyword Succeeds ${timeout} 2s Check Expected Available Deployment Replicas voltha voltha-rw-core 1
- Wait Until Keyword Succeeds ${timeout} 2s Check Expected Available Deployment Replicas voltha voltha-ofagent 1
-
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Check Expected Available Deployment Replicas voltha voltha-rw-core 1
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Check Expected Available Deployment Replicas voltha voltha-ofagent 1
# For some reason scaling down and up the POD behind a service causes the port forward to stop working,
# so restart the port forwarding for the API service
Restart VOLTHA Port Foward voltha-api-minimal
-
# Ensure that the ofagent pod is up and ready and the device is available in ONOS, this
# represents system connectivity being restored
Wait Until Keyword Succeeds ${timeout} 2s Device Is Available In ONOS
... http://karaf:karaf@${k8s_node_ip}:${ONOS_REST_PORT} ${of_id}
-
# Add subscriber access and verify that DHCP completes to ensure system is still functioning properly
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
@@ -437,40 +435,37 @@
${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
Set Suite Variable ${olt_device_id}
#validate olt states
- Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
- ... ${EMPTY} ${olt_device_id}
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${EMPTY} ${olt_device_id}
Enable Device ${olt_device_id}
- Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
- ... ${olt_serial_number}
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
Set Suite Variable ${logical_id}
Delete All Devices and Verify
[Documentation] Remove any devices from VOLTHA and ONOS
-
# Clear devices from VOLTHA
Disable Devices In Voltha Root=true
Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true
Delete Devices In Voltha Root=true
Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List
-
# Clear devices from ONOS
Remove All Devices From ONOS
... http://karaf:karaf@${k8s_node_ip}:${ONOS_REST_PORT}
Clear All Devices Then Create New Device
[Documentation] Remove any devices from VOLTHA and ONOS
-
# Remove all devices from voltha and nos
Delete All Devices and Verify
-
# Execute normal test Setup Keyword
Setup
Teardown
[Documentation] kills processes and cleans up interfaces on src+dst servers
Run Keyword If ${has_dataplane} Clean Up Linux
- Run Keyword If ${external_libs} Log Kubernetes Containers Logs Since Time ${datetime} ${container_list}
+ Run Keyword If ${external_libs} Log Kubernetes Containers
+ ... Logs Since Time ${datetime} ${container_list}
Collect Logs
[Documentation] Collect Logs from voltha and onos cli for various commands
@@ -504,12 +499,14 @@
Delete Device and Verify
[Documentation] Disable -> Delete devices via voltctl and verify its removed
- ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
+ ${rc} ${output}= Run and Return Rc and Output
+ ... ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
Should Be Equal As Integers ${rc} 0
Sleep 5s
- Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device DISABLED UNKNOWN REACHABLE
- ... ${olt_serial_number}
- ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number}
+ ${rc} ${output}= Run and Return Rc and Output
+ ... ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
Should Be Equal As Integers ${rc} 0
Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id}
@@ -518,30 +515,27 @@
... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
... This keyword can be used to call in any other tests where sanity check is required
... and avoids duplication of code.
-
${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
Set Global Variable ${of_id}
-
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
-
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
... ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=omci-flows-pushed
-
${onu_device_id}= Get Device ID From SN ${src['onu']}
- ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
- ... ${of_id}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU
- ... ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
+ ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get ONU Port in ONOS ${src['onu']} ${of_id}
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify Eapol Flows Added For ONU ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users
- ... ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
+ ... Verify ONU in AAA-Users ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
+ Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
+ ... Execute ONOS CLI Command ${k8s_node_ip} ${ONOS_SSH_PORT}
+ ... volt-add-subscriber-access ${of_id} ${onu_port}
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
@@ -549,8 +543,8 @@
... ${dst['container_name']}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
... Validate Subscriber DHCP Allocation ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
- Run Keyword and Ignore Error Collect Logs
+ Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
+ Run Keyword and Ignore Error Collect Logs
END
Repeat Sanity Test
@@ -568,19 +562,22 @@
${onu_device_id}= Get Device ID From SN ${src['onu']}
- ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
- ... ${of_id}
- Wait Until Keyword Succeeds ${timeout} 2s Verify Eapol Flows Added For ONU ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication After Reassociate
+ ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get ONU Port in ONOS ${src['onu']} ${of_id}
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify Eapol Flows Added For ONU ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Validate Authentication After Reassociate
... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
... ${src['container_type']} ${src['container_name']}
- Wait Until Keyword Succeeds ${timeout} 2s Verify ONU in AAA-Users ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} ${onu_port}
- Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command ${k8s_node_ip}
- ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
- Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
- ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Verify ONU in AAA-Users ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
+ Wait Until Keyword Succeeds ${timeout} 2s
+ ... Execute ONOS CLI Command ${k8s_node_ip} ${ONOS_SSH_PORT}
+ ... volt-add-subscriber-access ${of_id} ${onu_port}
+ Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
+ ... Validate DHCP and Ping True True
+ ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
... ${dst['container_name']}