diff --git a/tests/functional/Voltha_FailureScenarios.robot b/tests/functional/Voltha_FailureScenarios.robot
index 5e0bc6f..ce81521 100755
--- a/tests/functional/Voltha_FailureScenarios.robot
+++ b/tests/functional/Voltha_FailureScenarios.robot
@@ -756,7 +756,7 @@
         # Remove Subscriber Access (To replicate ATT workflow)
         Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command use single connection    ${ONOS_SSH_IP}
         ...    ${ONOS_SSH_PORT}    volt-remove-subscriber-access ${of_id} ${onu_port}
-        Verify ping is succesful except for given device     ${num_all_onus}    ${onu_device_id}
+        Verify ping is successful except for given device     ${num_all_onus}    ${src['onu']}
         Sleep    40s
         # Check ONU port is Enabled in ONOS
         Run Keyword And Continue On Failure    Wait Until Keyword Succeeds   120s   2s
diff --git a/tests/functional/Voltha_PODTests.robot b/tests/functional/Voltha_PODTests.robot
index 7269034..ee306e5 100755
--- a/tests/functional/Voltha_PODTests.robot
+++ b/tests/functional/Voltha_PODTests.robot
@@ -797,6 +797,85 @@
         ...    The downstream bandwidth guarantee was not met (${pct_limit_dn}% of resv)
     END
 
+Test ONU Delete and Auto-Discovery
+    [Documentation]    Tests the voltctl delete and Auto-Discovery of the ONU
+    [Tags]    functional    VOL-3098    ONUAutoDiscovery    notready
+    [Setup]    Run Keywords    Start Logging    ONUAutoDiscovery
+    ...        AND             Setup
+    [Teardown]    Run Keywords    Collect Logs
+    ...           AND             Delete All Devices and Verify
+    ...           AND             Run Keyword If    ${logging}    Collect Logs
+    ...           AND             Stop Logging    ONUAutoDiscovery
+    # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable
+    Run Keyword If    ${has_dataplane}    Clean Up Linux
+    Perform Sanity Test
+    FOR    ${I}    IN RANGE    0    ${num_all_onus}
+        ${src}=    Set Variable    ${hosts.src[${I}]}
+        ${dst}=    Set Variable    ${hosts.dst[${I}]}
+        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
+        ${of_id}=    Get ofID From OLT List    ${src['olt']}
+        ${nni_port}=    Wait Until Keyword Succeeds    ${timeout}    2s    Get NNI Port in ONOS    ${of_id}
+        ${onu_port}=    Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Get ONU Port in ONOS    ${src['onu']}    ${of_id}
+        # Remove Subscriber Access (To replicate ATT workflow)
+        Execute ONOS CLI Command use single connection    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}
+        ...    volt-remove-subscriber-access ${of_id} ${onu_port}
+        # Additional sleep to let subscriber delete process
+        Sleep    10s
+        # Delete ONU and Verify Ping Fails
+        Delete Device    ${onu_device_id}
+        Run Keyword If    ${has_dataplane}    Verify ping is successful except for given device
+        ...    ${num_all_onus}    ${src['onu']}
+        # Verify that no pending flows exist for the ONU port
+        Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Verify No Pending Flows For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
+        # ONU Auto-Discovery
+        ${onu_port}=    Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Get ONU Port in ONOS    ${src['onu']}    ${of_id}    ${src['uni_id']}
+        # Check ONU port is Enabled in ONOS
+        Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Verify UNI Port Is Enabled   ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${src['onu']}    ${src['uni_id']}
+        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
+        Run Keyword If    ${has_dataplane}    Clean Up Linux    ${onu_device_id}
+        # Verify default EAPOL flows are added for the ONU port
+        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Verify Eapol Flows Added For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${of_id}    ${onu_port}
+        # Verify ONU state in voltha
+        Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device    ENABLED    ACTIVE    REACHABLE
+        ...    ${src['onu']}    onu=True    onu_reason=omci-flows-pushed
+        # Perform Authentication
+        ${wpa_log}=    Run Keyword If    ${has_dataplane}    Catenate    SEPARATOR=.
+        ...    /tmp/wpa    ${src['dp_iface_name']}    log
+        Run Keyword If    ${has_dataplane}    Validate Authentication    True
+        ...    ${src['dp_iface_name']}    wpa_supplicant.conf    ${src['ip']}    ${src['user']}    ${src['pass']}
+        ...    ${src['container_type']}    ${src['container_name']}    ${wpa_log}
+        Wait Until Keyword Succeeds    ${timeout}    2
+        ...    Verify ONU in AAA-Users    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
+        Execute ONOS CLI Command use single connection    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}
+        ...    volt-add-subscriber-access ${of_id} ${onu_port}
+        # Verify that no pending flows exist for the ONU port
+        Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Verify No Pending Flows For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
+        # Verify subscriber access flows are added for the ONU port
+        Wait Until Keyword Succeeds    ${timeout}    5s
+        ...    Verify Subscriber Access Flows Added For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${of_id}
+        ...    ${onu_port}    ${nni_port}    ${src['c_tag']}    ${src['s_tag']}
+        # Verify subscriber EAPOL flow is installed
+        Wait Until Keyword Succeeds    ${timeout}    5s
+        ...    Verify Eapol Flows Added For ONU    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${of_id}
+        ...    ${onu_port}    ${src['c_tag']}
+        # Verify Meters in ONOS
+        Wait Until Keyword Succeeds    ${timeout}    5s
+        ...    Verify Meters in ONOS    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${of_id}    ${onu_port}
+        Run Keyword If    ${has_dataplane}    Validate DHCP and Ping    True
+        ...    True    ${src['dp_iface_name']}    ${src['s_tag']}    ${src['c_tag']}    ${dst['dp_iface_ip_qinq']}
+        ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
+        ...    ${dst['dp_iface_name']}    ${dst['ip']}    ${dst['user']}    ${dst['pass']}    ${dst['container_type']}
+        ...    ${dst['container_name']}
+        Wait Until Keyword Succeeds    ${timeout}    2s
+        ...    Validate Subscriber DHCP Allocation    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}    ${onu_port}
+    END
+
 *** Keywords ***
 Setup Suite
     [Documentation]    Set up the test suite