[VOL-4826][VOL-4827][VOL-4828] Robustness openonu-go-adapter
Contains implementation for
- Test of ONU power-off during mib downloading
- Test of ONU power-off during flow configuration [VOL-4828]
- Test of verification/correlation of ONU capabilities against
configuration requirements Priority Queues [VOL-4827]
- Test of verification/correlation of ONU capabilities against
configuration requirements TConts [VOL-4826]
Change-Id: I5fce312032275151b46e109f71fefb90a248ec45
diff --git a/Makefile b/Makefile
index 88291c3..5195311 100644
--- a/Makefile
+++ b/Makefile
@@ -668,6 +668,31 @@
voltha-memory-leak-tests: ROBOT_FILE := VOLTHA_Memory_Leak_Tests.robot
voltha-memory-leak-tests: voltha-memory-leak-test
+# Voltha openonu robustness tests att workflow
+onu-robustness-test-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE)
+onu-robustness-test-single-kind-att: ROBOT_MISC_ARGS += -i functional
+onu-robustness-test-single-kind-att: voltha-onu-robustness-tests
+
+# Voltha openonu robustness tests dt workflow
+onu-robustness-test-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE)
+onu-robustness-test-single-kind-dt: ROBOT_MISC_ARGS += -i functional
+onu-robustness-test-single-kind-dt: voltha-onu-robustness-tests
+
+# Voltha openonu robustness tests tt workflow
+onu-robustness-test-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE)
+onu-robustness-test-single-kind-tt: ROBOT_MISC_ARGS += -i functional
+onu-robustness-test-single-kind-tt: voltha-onu-robustness-tests
+
+# Voltha openonu robustness tests multi-uni tt workflow
+onu-robustness-test-multi-uni-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTI_UNI_SINGLE_PON_FILE)
+onu-robustness-test-multi-uni-kind-tt: ROBOT_MISC_ARGS += -v unitag_sub:True -i functionalMultiUni
+onu-robustness-test-multi-uni-kind-tt: voltha-onu-robustness-tests
+
+voltha-onu-robustness-tests: ROBOT_MISC_ARGS += -e notready --noncritical non-critical
+voltha-onu-robustness-tests: ROBOT_MISC_ARGS += $(ROBOT_DEBUG_LOG_OPT)
+voltha-onu-robustness-tests: ROBOT_FILE := Voltha_ONUErrorTests.robot
+voltha-onu-robustness-tests: openonu-go-adapter-tests
+
software-upgrade-test: vst_venv
source ./$</bin/activate ; set -u ;\
cd tests/software-upgrades ;\
diff --git a/VERSION b/VERSION
index 497a78c..03b7bd6 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-2.11.5
+2.11.6
diff --git a/libraries/onu_utilities.robot b/libraries/onu_utilities.robot
index 9604470..620c463 100755
--- a/libraries/onu_utilities.robot
+++ b/libraries/onu_utilities.robot
@@ -405,11 +405,16 @@
... Get ONU Port in ONOS ${src['onu']} ${of_id}
${of_id_onu_port}= Catenate SEPARATOR=- ${of_id} ${onu_port}
${pair_id}= Get Index From List ${onu_list} ${of_id_onu_port}
- Continue For Loop If -1 != ${pair_id}
+ Continue For Loop If -1 != ${pair_id} and ${unitag_sub} == False
Append To List ${onu_list} ${of_id_onu_port}
+ # Add subscriber
+ ${add_sub_cmd}= Run Keyword If ${unitag_sub}
+ ... Catenate volt-add-subscriber-unitag --tpId ${src['tp_id']} --sTag ${src['s_tag']}
+ ... --cTag ${src['c_tag']} ${src['onu']}-${src['uni_id']}
+ ... ELSE
+ ... Set Variable volt-add-subscriber-access ${of_id} ${onu_port}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
- ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
- ... volt-add-subscriber-access ${of_id} ${onu_port}
+ ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${add_sub_cmd}
Run Keyword If ${print2console} Log \r\n[${I}] volt-add-subscriber-access ${of_id} ${onu_port}.
... console=yes
END
@@ -479,7 +484,7 @@
${gemportids}= Get From Dictionary ${decoderesult} gemport_ids
${length}= Get Length ${gemportids}
Should Be Equal As Integers ${nbofgemports} ${length}
- ... msg=Number of gem ports (${length}) does not match with techprofile ${techprofile}/${nbofgemports}
+ ... msg=Number of gem ports (${length}) does not match with techprofile ${nbofgemports}
END
Get Resource Instances ETCD Data
@@ -803,6 +808,23 @@
... ${onu_port}
END
+Validate Events All ONUs
+ [Documentation] Validates kafka events for all ONUs
+ [Arguments] ${list_onu_device_id} ${expected_event}
+ ${Kafka_Records}= kafka.Records Get voltha.events
+ ${RecordsLength}= Get Length ${Kafka_Records}
+ FOR ${Index} IN RANGE 0 ${RecordsLength}
+ ${metric}= Set Variable ${Kafka_Records[${Index}]}
+ ${message}= Get From Dictionary ${metric} message
+ ${event}= volthatools.Events Decode Event ${message} return_default=true
+ Continue For Loop If not 'device_event' in ${event}
+ ${event_name}= Get From Dictionary ${event['device_event']} device_event_name
+ Continue For Loop If "${event_name}" != "${expected_event}"
+ ${resource_id}= Get From Dictionary ${event['device_event']} resource_id
+ Remove Values From List ${list_onu_device_id} ${resource_id}
+ END
+ Should Be Empty ${list_onu_device_id} Missing "${expected_event}" for ONUs ${list_onu_device_id}!
+
Map State
[Documentation] This keyword converts the passed numeric value or name of a onu state to its state values.
[Arguments] ${state}
diff --git a/tests/data/TechProfile-1T17GEM-error-case-priority-queues.json b/tests/data/TechProfile-1T17GEM-error-case-priority-queues.json
new file mode 100644
index 0000000..4d0cbeb
--- /dev/null
+++ b/tests/data/TechProfile-1T17GEM-error-case-priority-queues.json
@@ -0,0 +1,505 @@
+{
+ "name": "17GemPortErrorCasePrioQueue",
+ "profile_type": "XGS-PON",
+ "version": 1,
+ "num_gem_ports": 17,
+ "instance_control": {
+ "onu": "multi-instance",
+ "uni": "single-instance",
+ "max_gem_payload_size": "auto"
+ },
+ "us_scheduler": {
+ "additional_bw": "AdditionalBW_BestEffort",
+ "direction": "UPSTREAM",
+ "priority": 0,
+ "weight": 0,
+ "q_sched_policy": "StrictPriority"
+ },
+ "ds_scheduler": {
+ "additional_bw": "AdditionalBW_BestEffort",
+ "direction": "DOWNSTREAM",
+ "priority": 0,
+ "weight": 0,
+ "q_sched_policy": "StrictPriority"
+ },
+ "upstream_gem_port_attribute_list": [
+ {
+ "pbit_map": "0b10000000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 0,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b01000000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 1,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00100000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 2,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00010000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 3,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00001000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 4,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000100",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 5,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000010",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 6,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 7,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b10000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 8,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b01000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 9,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00100001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 10,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00010001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 11,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00001001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 12,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000101",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 13,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000011",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 14,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b11000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 15,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b01100001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 16,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ],
+ "downstream_gem_port_attribute_list": [
+ {
+ "pbit_map": "0b10000000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 0,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b01000000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 1,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00100000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 2,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00010000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 3,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00001000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 4,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000100",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 5,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000010",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 6,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 7,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b10000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 8,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b01000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 9,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00100001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 10,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00010001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 11,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00001001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 12,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000101",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 13,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b00000011",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 14,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b11000001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 15,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ },
+ {
+ "pbit_map": "0b01100001",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 16,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "min_threshold": 0,
+ "max_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ]
+}
diff --git a/tests/data/TechProfile-1T1GEM-multi-instances.json b/tests/data/TechProfile-1T1GEM-multi-instances.json
new file mode 100644
index 0000000..d12d8ec
--- /dev/null
+++ b/tests/data/TechProfile-1T1GEM-multi-instances.json
@@ -0,0 +1,57 @@
+{
+ "name": "1T1GEMMultiInstances",
+ "profile_type": "XGS-PON",
+ "version": 1,
+ "num_gem_ports": 1,
+ "instance_control": {
+ "onu": "multi-instance",
+ "uni": "multi-instance",
+ "max_gem_payload_size": "auto"
+ },
+ "us_scheduler": {
+ "additional_bw": "AdditionalBW_BestEffort",
+ "direction": "UPSTREAM",
+ "priority": 1,
+ "weight": 10,
+ "q_sched_policy": "StrictPriority"
+ },
+ "ds_scheduler": {
+ "additional_bw": "AdditionalBW_BestEffort",
+ "direction": "DOWNSTREAM",
+ "priority": 1,
+ "weight": 10,
+ "q_sched_policy": "StrictPriority"
+ },
+ "upstream_gem_port_attribute_list": [
+ {
+ "pbit_map": "0b10000000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 0,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ],
+ "downstream_gem_port_attribute_list": [
+ {
+ "pbit_map": "0b10000000",
+ "aes_encryption": "True",
+ "scheduling_policy": "StrictPriority",
+ "priority_q": 0,
+ "weight": 100,
+ "discard_policy": "TailDrop",
+ "max_q_size": "auto",
+ "discard_config": {
+ "max_threshold": 0,
+ "min_threshold": 0,
+ "max_probability": 0
+ }
+ }
+ ]
+}
diff --git a/tests/openonu-go-adapter/Voltha_ONUErrorTests.robot b/tests/openonu-go-adapter/Voltha_ONUErrorTests.robot
new file mode 100755
index 0000000..9cf769d
--- /dev/null
+++ b/tests/openonu-go-adapter/Voltha_ONUErrorTests.robot
@@ -0,0 +1,346 @@
+# Copyright 2022 - present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+Documentation Test of open ONU error cases
+... The test suite validates special error scenarios of openonu_go_adapter
+... -- power off during mib download
+... -- power of during flow configuration
+... -- onu capabilities against configuration requirements priority queues
+... -- onu capabilities against configuration requirements tconts
+... see also VOL-4796
+... In case of kafka pod runs in k8s cluster - kafka has to deploy with following EXTRA_HELM_FLAGS
+... --set externalAccess.enabled=true,
+... --set externalAccess.service.type=NodePort,
+... --set externalAccess.service.nodePorts[0]=${KAFKA_PORT},
+... --set externalAccess.service.domain=${KAFKA_IP}
+... with e.g. service.domain=10.0.02.15 or 127.0.0.1 and service.nodePorts[0]=30201!
+... For voltha-infra prefix kafka. is needed e.g.: --set kafka.externalAccess.enabled=true
+Suite Setup Setup Suite
+Suite Teardown Teardown Suite
+Test Setup Setup
+Test Teardown Teardown
+Library Collections
+Library String
+Library OperatingSystem
+Library XML
+Library RequestsLibrary
+Library ../../libraries/DependencyLibrary.py
+Resource ../../libraries/onos.robot
+Resource ../../libraries/voltctl.robot
+Resource ../../libraries/voltha.robot
+Resource ../../libraries/utils.robot
+Resource ../../libraries/k8s.robot
+Resource ../../libraries/onu_utilities.robot
+Resource ../../libraries/bbsim.robot
+Resource ../../variables/variables.robot
+
+Library kafka_robot.KafkaClient log_level=DEBUG WITH NAME kafka
+Library grpc_robot.VolthaTools WITH NAME volthatools
+
+
+*** Variables ***
+${NAMESPACE} voltha
+${INFRA_NAMESPACE} default
+${timeout} 60s
+${of_id} 0
+${logical_id} 0
+${has_dataplane} True
+${external_libs} True
+${teardown_device} True
+${scripts} ../../scripts
+# Per-test logging on failure is turned off by default; set this variable to enable
+${container_log_dir} ${None}
+
+# logging flag to enable Collect Logs, can be passed via the command line too
+# example: -v logging:True
+${logging} False
+# if True execution will be paused before clean up, only use in case of manual testing, do not use in ci pipeline!
+# example: -v pausebeforecleanup:True
+${pausebeforecleanup} False
+# flag for first test, needed due default timeout in BBSim to mimic OLT reboot of 60 seconds
+${firsttest} True
+# determines the environment workflow: DT, TT or ATT (default)
+# example: -v workflow:DT
+${workflow} ATT
+# KV Store Prefix
+# example: -v kvstoreprefix:voltha/voltha_voltha
+${kvstoreprefix} voltha/voltha_voltha
+# when voltha is running in k8s port forwarding is needed
+# example: -v PORT_FORWARDING:False
+${PORT_FORWARDING} True
+# kafka ip e.g. ip of master host where k8s is running
+# example: -v KAFKA_IP:10.0.2.15
+${KAFKA_IP} 127.0.0.1
+# kafka port: port of kafka nodeport
+# example: -v KAFKA_PORT:30201
+${KAFKA_PORT} 30201
+# kafka service port: service port of kafka nodeport
+# example: -v KAFKA_SVC_PORT:9094
+${KAFKA_SVC_PORT} 9094
+# onu MIB audit interval
+# example: -v ONU_MIB_AUDIT_INTERVAL:50s
+${ONU_MIB_AUDIT_INTERVAL} 60s
+# MDS mitsmatches per ONU
+# example: -v MDS_MISMATCHES_PER_ONU:2
+${MDS_MISMATCHES_PER_ONU} 3
+# if True execution will be paused before clean up, only use in case of manual testing, do not use in ci pipeline!
+# example: -v pausebeforecleanup:True
+${pausebeforecleanup} False
+# if True some outputs to console are done during running tests e.g. long duration flow test
+# example: -v print2console:True
+${print2console} False
+${suppressaddsubscriber} True
+${data_dir} ../data
+
+# flag to choose the subscriber provisioning command type in ONOS
+# TT often provision a single services for a subscriber (eg: hsia, voip, ...) one after the other.
+# if set to True, command used is "volt-add-subscriber-unitag"
+# if set to False, comand used is "volt-add-subscriber-access"
+${unitag_sub} False
+
+*** Test Cases ***
+Verify Power Off During MIB Downloading
+ [Documentation] Validates the ONU Go adapter regarding robustness in case of ONU power-off during MIB downloading
+ [Tags] functional PowerOffWhileMibDownload
+ [Setup] Run Keywords Start Logging PowerOffWhileMibDownload
+ ... AND Setup Test
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #get olt serial number
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Enable Device ${olt_device_id}
+ END
+ Current State Test All Onus starting-openomci
+ Power Off ONU Device ${namespace}
+ Current State Test All Onus stopping-openomci
+ Power On ONU Device ${namespace}
+ Run Keyword If "${workflow}"=="DT" Perform Sanity Test DT
+ ... ELSE IF "${workflow}"=="TT" Perform Sanity Tests TT
+ ... ELSE Perform Sanity Test
+ [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console}
+ ... AND Run Keyword If ${logging} Collect Logs
+ ... AND Delete All Devices and Verify
+ ... AND Delete MIB Template Data ${INFRA_NAMESPACE}
+ ... AND Stop Logging PowerOffWhileMibDownload
+
+Verify Power Off During Flow Configuration
+ [Documentation] Validates the ONU Go adapter regarding robustness in case of ONU power-off during flow configuration
+ ... see VOL-4828
+ [Tags] functional PowerOffWhileFlowConfig
+ [Setup] Run Keywords Start Logging PowerOffWhileFlowConfig
+ ... AND Setup Test
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #get olt serial number
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Enable Device ${olt_device_id}
+ END
+ ${state2test}= Set Variable If
+ ... "${workflow}"=="DT" initial-mib-downloaded
+ ... "${workflow}"=="TT" initial-mib-downloaded
+ ... "${workflow}"=="ATT" omci-flows-pushed
+ ... initial-mib-downloaded
+ Current State Test All Onus ${state2test}
+ FOR ${J} IN RANGE 0 ${num_olts}
+ ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
+ ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
+ ... ${olt_serial_number}
+ Do Onu Subscriber Add Per OLT ${of_id} ${olt_serial_number} ${print2console}
+ END
+ Power Off ONU Device ${namespace}
+ Current State Test All Onus stopping-openomci
+ Power On ONU Device ${namespace}
+ Run Keyword If "${workflow}"=="DT" Perform Sanity Test DT ${suppressaddsubscriber}
+ ... ELSE IF "${workflow}"=="TT" Perform Sanity Tests TT ${suppressaddsubscriber}
+ ... ELSE Perform Sanity Test ${suppressaddsubscriber}
+ [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console}
+ ... AND Run Keyword If ${logging} Collect Logs
+ ... AND Delete All Devices and Verify
+ ... AND Delete MIB Template Data ${INFRA_NAMESPACE}
+ ... AND Stop Logging PowerOffWhileFlowConfig
+
+Verify ONU capabilities against configuration requirements Priority Queues
+ [Documentation] Validates the ONU capabilities against configuration requirements regarding number of priority queues.
+ ... Require more priority queues than ONU capabilities. Check for correct reason/state of ONU and kafka
+ ... message.
+ ... see VOL-4827
+ [Tags] functional ONUCapabilitiesVsConfigReqPrioQueues
+ [Setup] Run Keywords Start Logging ONUCapabilitiesVsConfigReqPrioQueues
+ ... AND Set Tech Profile 1T17GEM-error-case-priority-queues
+ ... AND Setup Test
+ kafka.Records Clear
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #get olt serial number
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Enable Device ${olt_device_id}
+ END
+ ${state2test}= Set Variable If
+ ... "${workflow}"=="DT" initial-mib-downloaded
+ ... "${workflow}"=="TT" initial-mib-downloaded
+ ... "${workflow}"=="ATT" stopping-openomci
+ ... initial-mib-downloaded
+ Current State Test All Onus ${state2test}
+ FOR ${J} IN RANGE 0 ${num_olts}
+ #in case of ATT no flows have to configured. leave loop
+ Exit For Loop If "${workflow}"=="ATT"
+ ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
+ ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
+ ... ${olt_serial_number}
+ Do Onu Subscriber Add Per OLT ${of_id} ${olt_serial_number} ${print2console}
+ END
+ ${alternativeonustates}= Create List omci-flows-deleted
+ Current State Test All Onus stopping-openomci alternativeonustate=${alternativeonustates}
+ ${list_onu_device_id} Create List
+ Build ONU Device Id List ${list_onu_device_id}
+ ${event}= Set Variable ONU_CONFIG_FAILURE_MISSING_US_PRIORITY_QUEUE
+ Wait Until Keyword Succeeds ${timeout} 5s Validate Events All ONUs ${list_onu_device_id} ${event}
+ [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console}
+ ... AND Run Keyword If ${logging} Collect Logs
+ ... AND Run Keyword If ${pausebeforecleanup} Import Library Dialogs
+ ... AND Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up!
+ ... AND Set Suite Variable ${TechProfile} ${EMPTY}
+ ... AND Remove Tech Profile ${INFRA_NAMESPACE}
+ ... AND Delete All Devices and Verify
+ ... AND Get ONU Go Adapter ETCD Data ${INFRA_NAMESPACE} ${kvstoreprefix}
+ ... AND Delete MIB Template Data ${INFRA_NAMESPACE}
+ ... AND Stop Logging ONUCapabilitiesVsConfigReqPrioQueues
+
+Verify ONU capabilities against configuration requirements TConts
+ [Documentation] Validates the ONU capabilities against configuration requirements regarding number of tconts.
+ ... Require more tconts than ONU capabilities. Check for correct reason/state of ONU and kafka message
+ ... VOL-4826
+ ... Hint: Run this test case using bbsim-kind-multi-uni-tt.yaml!
+ [Tags] functionalMultiUni ONUCapabilitiesVsConfigReqTConts
+ [Setup] Run Keywords Start Logging ONUCapabilitiesVsConfigReqTConts
+ ... AND Set Tech Profile 1T1GEM-multi-instances ${INFRA_NAMESPACE} 64
+ ... AND Set Tech Profile 1T1GEM-multi-instances ${INFRA_NAMESPACE} 65
+ ... AND Set Tech Profile 1T1GEM-multi-instances ${INFRA_NAMESPACE} 66
+ ... AND Setup Test
+ kafka.Records Clear
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #get olt serial number
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Enable Device ${olt_device_id}
+ END
+ ${state2test}= Set Variable If
+ ... "${workflow}"=="DT" initial-mib-downloaded
+ ... "${workflow}"=="TT" initial-mib-downloaded
+ ... "${workflow}"=="ATT" omci-flows-pushed
+ ... initial-mib-downloaded
+ Current State Test All Onus ${state2test}
+ FOR ${J} IN RANGE 0 ${num_olts}
+ ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
+ ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
+ ... ${olt_serial_number}
+ Do Onu Subscriber Add Per OLT ${of_id} ${olt_serial_number} ${print2console}
+ END
+ ${alternativeonustates}= Create List omci-flows-deleted
+ Current State Test All Onus stopping-openomci alternativeonustate=${alternativeonustates}
+ ${list_onu_device_id} Create List
+ Build ONU Device Id List ${list_onu_device_id}
+ ${list_onu_device_id} Create List
+ Build ONU Device Id List ${list_onu_device_id}
+ ${event}= Set Variable ONU_CONFIG_FAILURE_MISSING_TCONT
+ Wait Until Keyword Succeeds ${timeout} 5s Validate Events All ONUs ${list_onu_device_id} ${event}
+ [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console}
+ ... AND Run Keyword If ${logging} Collect Logs
+ ... AND Run Keyword If ${pausebeforecleanup} Import Library Dialogs
+ ... AND Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up!
+ ... AND Set Suite Variable ${TechProfile} ${EMPTY}
+ ... AND Remove Tech Profile ${INFRA_NAMESPACE}
+ ... AND Remove Tech Profile ${INFRA_NAMESPACE} 65
+ ... AND Remove Tech Profile ${INFRA_NAMESPACE} 66
+ ... AND Delete All Devices and Verify
+ ... AND Get ONU Go Adapter ETCD Data ${INFRA_NAMESPACE} ${kvstoreprefix}
+ ... AND Delete MIB Template Data ${INFRA_NAMESPACE}
+ ... AND Stop Logging ONUCapabilitiesVsConfigReqTConts
+
+*** Keywords ***
+Setup Suite
+ [Documentation] Set up the test suite
+ Start Logging Setup or Teardown Setup-${SUITE NAME}
+ Common Test Suite Setup
+ ${switch_type}= Get Variable Value ${web_power_switch.type}
+ Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
+ # set ${kafka} depending on environment in case of port-forward is needed
+ ${rc} ${kafka}= Run Keyword If ${PORT_FORWARDING} Run and Return Rc and Output
+ ... kubectl get svc -n ${INFRA_NAMESPACE} | grep kafka-0-external | awk '{print $1}'
+ Run Keyword If ${PORT_FORWARDING} Should Not Be Empty ${kafka} Service kafka-0-external not found
+ # start port forwarding if needed (when voltha runs in k8s)
+ ${portFwdHandle} = Run Keyword If ${PORT_FORWARDING} Start Process
+ ... kubectl port-forward --address 0.0.0.0 --namespace default svc/${kafka} ${KAFKA_PORT}:${KAFKA_SVC_PORT} &
+ ... shell=true
+ Set Suite Variable ${portFwdHandle}
+ Sleep 5s
+ # open connection to read kafka bus
+ Wait Until Keyword Succeeds 3x 5s
+ ... kafka.Connection Open ${KAFKA_IP} ${KAFKA_PORT} voltha.events timestamp_from=0
+ # delete etcd MIB Template Data
+ Delete MIB Template Data ${INFRA_NAMESPACE}
+ # delete etcd onu data
+ Delete ONU Go Adapter ETCD Data namespace=${INFRA_NAMESPACE} validate=True
+ Stop Logging Setup or Teardown Setup-${SUITE NAME}
+
+Teardown Suite
+ [Documentation] tear down the test suite
+ Run Keyword If ${pausebeforecleanup} Import Library Dialogs
+ Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up!
+ Run Keyword If ${pausebeforecleanup} Log Teardown will be continued... console=yes
+ # close connection to kafka
+ kafka.Connection Close
+ # stop port forwarding if started
+ Run Keyword If ${PORT_FORWARDING} Terminate Process ${portFwdHandle} kill=true
+ # call common suite teardown
+ utils.Teardown Suite
+ # delete etcd MIB Template Data
+ Delete MIB Template Data ${INFRA_NAMESPACE}
+ # delete etcd onu data
+ Delete ONU Go Adapter ETCD Data namespace=${INFRA_NAMESPACE} validate=True
+ Close All ONOS SSH Connections
+
+Setup Test
+ [Documentation] Pre-test Setup
+ #test for empty device list
+ Test Empty Device List
+ Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s Openolt is Up
+ ... ${olt_ssh_ip} ${olt_user} ${olt_pass}
+ Run Keyword If ${has_dataplane} Sleep 60s
+ Run Keyword If "${firsttest}"=="False" Sleep 35s
+ ${firsttest} Set Variable False
+ Set Suite Variable ${firsttest}
+ # Create a list of olt ids (logical and device_id)
+ ${olt_ids} Create List
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #create/preprovision device
+ ${olt_device_id}= Run Keyword If "${list_olts}[${I}][type]" == "${None}"
+ ... Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport]
+ ... ELSE Create Device ${list_olts}[${I}][ip] ${list_olts}[${I}][oltport] ${list_olts}[${I}][type]
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id} by_dev_id=True
+ Sleep 5s
+ ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
+ ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
+ ... of_id ${of_id} sn ${olt_serial_number}
+ Append To List ${olt_ids} ${olt}
+ END
+ Set Global Variable ${olt_ids}
diff --git a/tests/openonu-go-adapter/Voltha_ONUMibAudit.robot b/tests/openonu-go-adapter/Voltha_ONUMibAudit.robot
index b9d7186..8c0cbd8 100755
--- a/tests/openonu-go-adapter/Voltha_ONUMibAudit.robot
+++ b/tests/openonu-go-adapter/Voltha_ONUMibAudit.robot
@@ -108,7 +108,8 @@
${list_onu_device_id} Create List
Build ONU Device Id List ${list_onu_device_id}
Run Keyword If ${print2console} Log Check for device events that indicate a failed MDS check. console=yes
- Wait Until Keyword Succeeds ${interval} 5s Validate MIB Audits All ONUs ${list_onu_device_id}
+ ${event}= Set Variable ONU_MIB_AUDIT_FAILURE_MDS
+ Wait Until Keyword Succeeds ${interval} 5s Validate Events All ONUs ${list_onu_device_id} ${event}
kafka.Records Clear
Run Keyword If ${print2console} Log Sanity Test after MIB Audit. console=yes
Run Keyword If "${workflow}"=="DT" Perform Sanity Test DT ${suppressaddsubscriber}
@@ -183,23 +184,6 @@
Run Keyword If ${preload_tech_profile} Remove Tech Profile ${INFRA_NAMESPACE} 65
Run Keyword If ${preload_tech_profile} Remove Tech Profile ${INFRA_NAMESPACE} 66
-Validate MIB Audits All ONUs
- [Documentation] Validates MIB Audit Events per ONU
- [Arguments] ${list_onu_device_id}
- ${Kafka_Records}= kafka.Records Get voltha.events
- ${RecordsLength}= Get Length ${Kafka_Records}
- FOR ${Index} IN RANGE 0 ${RecordsLength}
- ${metric}= Set Variable ${Kafka_Records[${Index}]}
- ${message}= Get From Dictionary ${metric} message
- ${event}= volthatools.Events Decode Event ${message} return_default=true
- Continue For Loop If not 'device_event' in ${event}
- ${event_name}= Get From Dictionary ${event['device_event']} device_event_name
- Continue For Loop If "${event_name}" != "ONU_MIB_AUDIT_FAILURE_MDS"
- ${resource_id}= Get From Dictionary ${event['device_event']} resource_id
- Remove Values From List ${list_onu_device_id} ${resource_id}
- END
- Should Be Empty ${list_onu_device_id} Missing MIB Audits for ONUs ${list_onu_device_id}!
-
Calculate Interval
[Documentation] Converts the passed value in seconds, adds percentage and return it w/o unit
... Conversion to string is needed to remove float format!