| #Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Test various end-to-end scenarios |
| Suite Setup Setup Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../voltha/tests/atests/common/testCaseUtils.py |
| Resource ../../cord-tester/src/test/cord-api/Framework/Subscriber.robot |
| Resource ../../cord-tester/src/test/cord-api/Framework/OLT.robot |
| Resource ../../cord-tester/src/test/cord-api/Framework/DHCP.robot |
| Resource ../../cord-tester/src/test/cord-api/Framework/Kubernetes.robot |
| Resource ../libraries/onos.robot |
| Resource ../libraries/voltctl.robot |
| Resource ../libraries/utils.robot |
| Resource ../variables/variables.robot |
| |
| *** Variables *** |
| ${POD_NAME} flex-ocp-cord |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| #${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${VOLTHA_POD_NUM} 8 |
| ${timeout} 90s |
| ${num_onus} 1 |
| ${of_id} 0 |
| ${logical_id} 0 |
| |
| *** Test Cases *** |
| Sanity E2E Test for OLT/ONU on POD |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Validate successful authentication/DHCP/E2E ping for the tech profile that is used |
| #[Setup] Clean Up Linux |
| [Tags] test1 |
| ${of_id}= Wait Until Keyword Succeeds 60s 15s Validate OLT Device in ONOS ${olt_serial_number} |
| #Wait Until Keyword Succeeds 60s 2s Verify Eapol Flows Added ${k8s_node_ip} ${ONOS_SSH_PORT} 5 |
| Validate Authentication True ${src0['dp_iface_name']} wpa_supplicant.conf ${src0['ip']} ${src0['user']} ${src0['pass']} ${src0['container_type']} ${src0['container_name']} |
| #Validate ONU authenticated in ONOS |
| Wait Until Keyword Succeeds 90s 2s Verify Number of AAA-Users ${k8s_node_ip} ${ONOS_SSH_PORT} ${num_onus} |
| Wait Until Keyword Succeeds 60s 2s Execute ONOS Command ${k8s_node_ip} ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} 16 |
| # Perform dhclient and ping operations |
| Validate DHCP and Ping True True ${src0['dp_iface_name']} ${src0['s_tag']} ${src0['c_tag']} ${dst0['dp_iface_ip_qinq']} ${src0['ip']} ${src0['user']} ${src0['pass']} ${src0['container_type']} ${src0['container_name']} ${dst0['dp_iface_name']} ${dst0['ip']} ${dst0['user']} ${dst0['pass']} ${dst0['container_type']} ${dst0['container_name']} |
| #Validate DHCP allocation in ONOS |
| Wait Until Keyword Succeeds 60s 2s Validate DHCP Allocations ${k8s_node_ip} ${ONOS_SSH_PORT} ${num_onus} |
| |
| |
| *** Keywords *** |
| Setup Suite |
| Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG} |
| Set Global Variable ${export_kubeconfig} export KUBECONFIG=${KUBERNETES_CONF} |
| Set Global Variable ${of_id} |
| Set Global Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG} |
| ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip") |
| ${k8s_node_user}= Evaluate ${nodes}[0].get("user") |
| ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass") |
| Check CLI Tools Configured |
| ${onos_auth}= Create List karaf karaf |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ONOS http://${k8snode_ip}:${ONOS_REST_PORT} auth=${ONOS_AUTH} |
| Set Global Variable ${export_kubeconfig} export KUBECONFIG=${KUBERNETES_CONF} |
| ${olt_ip}= Evaluate ${olts}[0].get("ip") |
| ${olt_user}= Evaluate ${olts}[0].get("user") |
| ${olt_pass}= Evaluate ${olts}[0].get("pass") |
| ${olt_serial_number}= Evaluate ${olts}[0].get("serial") |
| ${onu_serial_number}= Evaluate ${onus}[0].get("serial") |
| Set Suite Variable ${olt_serial_number} |
| Set Suite Variable ${onu_serial_number} |
| Set Suite Variable ${olt_ip} |
| Set Suite Variable ${olt_user} |
| Set Suite Variable ${olt_pass} |
| Set Suite Variable ${k8s_node_ip} |
| Set Suite Variable ${k8s_node_user} |
| Set Suite Variable ${k8s_node_pass} |
| @{container_list}= Create List |
| Append To List ${container_list} adapter-open-olt |
| Append To List ${container_list} adapter-open-onu |
| Append To List ${container_list} voltha-api-server |
| Append To List ${container_list} voltha-ro-core |
| Append To List ${container_list} voltha-rw-core-11 |
| Append To List ${container_list} voltha-rw-core-12 |
| Append To List ${container_list} voltha-ofagent |
| Set Suite Variable ${container_list} |
| Set Deployment Config Variables |
| ${datetime}= Get Current Datetime On Kubernetes Node ${k8s_node_ip} ${k8s_node_user} ${k8s_node_pass} |
| Set Suite Variable ${datetime} |
| |
| Setup |
| #create/preprovision device |
| ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT} |
| Set Suite Variable ${olt_device_id} |
| #enable device |
| Enable Device ${olt_device_id} |
| #validate olt states |
| Wait Until Keyword Succeeds 60s 5s Validate Device ${olt_serial_number} ENABLED ACTIVE REACHABLE |
| #validate onu states |
| Wait Until Keyword Succeeds 60s 5s Validate Device ${onu_serial_number} ENABLED ACTIVE REACHABLE onu=True onu_reason=tech-profile-config-download-success |
| #get onu device id |
| ${onu_device_id}= Get Device ID From SN ${onu_serial_number} |
| Set Suite Variable ${onu_device_id} |
| ${logical_id}= Get Logical Device ID From SN ${olt_serial_number} |
| Set Suite Variable ${logical_id} |
| |
| Teardown |
| [Documentation] kills processes and cleans up interfaces on src+dst servers |
| Get Device Output from Voltha ${of_id} |
| Get Logical Device Output from Voltha ${logical_id} |
| Get ONOS Status ${k8s_node_ip} |
| Clean Up Linux |
| Log Kubernetes Containers Logs Since Time ${datetime} ${container_list} |
| |
| Clean Up Linux |
| [Documentation] Kill processes and clean up interfaces on src+dst servers |
| Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src0['ip']} ${src0['user']} ${src0['pass']} ${src0['container_type']} ${src0['container_name']} |
| Run Keyword And Ignore Error Kill Linux Process [d]hclient ${src0['ip']} ${src0['user']} ${src0['pass']} ${src0['container_type']} ${src0['container_name']} |
| Run Keyword If '${dst0['ip']}' != '${None}' Run Keyword And Ignore Error Kill Linux Process [d]hcpd ${dst0['ip']} ${dst0['user']} ${dst0['pass']} ${dst0['container_type']} ${dst0['container_name']} |
| Delete IP Addresses from Interface on Remote Host ${src0['dp_iface_name']} ${src0['ip']} ${src0['user']} ${src0['pass']} ${src0['container_type']} ${src0['container_name']} |
| Run Keyword If '${dst0['ip']}' != '${None}' Delete Interface on Remote Host ${dst0['dp_iface_name']}.${src0['s_tag']} ${dst0['ip']} ${dst0['user']} ${dst0['pass']} ${dst0['container_type']} ${dst0['container_name']} |
| |