diff --git a/tests/functional/Voltha_PODTests.robot b/tests/functional/Voltha_PODTests.robot
index e26f820..1d172a5 100644
--- a/tests/functional/Voltha_PODTests.robot
+++ b/tests/functional/Voltha_PODTests.robot
@@ -190,49 +190,6 @@
         Run Keyword and Ignore Error    Collect Logs
     END
 
-Check OLT/ONU Authentication After Radius Pod Restart
-    [Documentation]    After radius restart, triggers reassociation, checks status and
-    ...    authentication, validates dhcp and ping. Note : wpa reassociate works only when
-    ...    wpa supplicant is running in background hence it is recommended to remove
-    ...    teardown from previous test or uncomment 'Teardown    None'.
-    ...    Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
-    [Tags]    functional    RadiusRestart    released
-    [Setup]    Run Keywords    Announce Message    START TEST RadiusRestart
-    ...        AND             Start Logging    RadiusRestart
-    [Teardown]    Run Keywords    Collect Logs
-    ...           AND             Stop Logging    RadiusRestart
-    ...           AND             Announce Message    END TEST RadiusRestart
-    ${waitforRestart}    Set Variable    120s
-    Wait Until Keyword Succeeds    ${timeout}    15s    Restart Pod    ${NAMESPACE}    ${RESTART_POD_NAME}
-    Wait Until Keyword Succeeds    ${waitforRestart}    2s    Validate Pod Status    ${RESTART_POD_NAME}   ${NAMESPACE}
-    ...    Running
-    FOR    ${I}    IN RANGE    0    ${num_onus}
-        ${src}=    Set Variable    ${hosts.src[${I}]}
-        ${dst}=    Set Variable    ${hosts.dst[${I}]}
-        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
-        ${onu_port}=    Wait Until Keyword Succeeds    ${timeout}    2s
-        ...    Get ONU Port in ONOS    ${src['onu']}    ${of_id}
-        Wait Until Keyword Succeeds    ${timeout}    2s
-        ...    Verify Eapol Flows Added For ONU    ${k8s_node_ip}    ${ONOS_SSH_PORT}    ${onu_port}
-        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure
-        ...    Validate Authentication After Reassociate    True    ${src['dp_iface_name']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}
-        ...    ${src['container_type']}    ${src['container_name']}
-        Wait Until Keyword Succeeds    ${timeout}    2s    Verify ONU in AAA-Users    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}    ${onu_port}
-        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure
-        ...    Validate DHCP and Ping    True    True    ${src['dp_iface_name']}
-        ...    ${src['s_tag']}    ${src['c_tag']}    ${dst['dp_iface_ip_qinq']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}
-        ...    ${src['container_type']}    ${src['container_name']}
-        ...    ${dst['dp_iface_name']}    ${dst['ip']}    ${dst['user']}
-        ...    ${dst['pass']}    ${dst['container_type']}    ${dst['container_name']}
-        Wait Until Keyword Succeeds    ${timeout}    2s    Run Keyword And Continue On Failure
-        ...    Validate Subscriber DHCP Allocation    ${k8s_node_ip}    ${ONOS_SSH_PORT}    ${onu_port}
-        Run Keyword and Ignore Error    Get Device Output from Voltha    ${onu_device_id}
-        Run Keyword and Ignore Error    Collect Logs
-    END
-
 Check DHCP attempt fails when subscriber is not added
     [Documentation]    Validates when removed subscriber access, DHCP attempt, ping fails and
     ...    when again added subscriber access, DHCP attempt, ping succeeds
@@ -402,167 +359,51 @@
     ${rc}    ${output}=    Run and Return Rc and Output    ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
     Should Be Equal As Integers    ${rc}    0
     Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s    Test Empty Device List
-    #Adding setup here to add the devices back since this TC removes the devices
-    Run Keyword If    ${has_dataplane}    sleep    180s
-    #setup
-
-Sanity E2E Test for OLT/ONU on POD With Core Fail and Restart
-    [Documentation]    Deploys an device instance and waits for it to authenticate. After
-    ...    authentication is successful the rw-core deployment is scaled to 0 instances to
-    ...    simulate a POD crash. The test then scales the rw-core back to a single instance
-    ...    and configures ONOS for access. The test succeeds if the device is able to
-    ...    complete the DHCP sequence.
-    [Tags]    bbsim    rwcore-restart
-    [Setup]    Run Keywords    Announce Message    START TEST RwCoreFailAndRestart
-    ...        AND             Start Logging    RwCoreFailAndRestart
-    ...        AND             Clear All Devices Then Create New Device
-    [Teardown]   Run Keywords    Collect Logs
-    ...          AND             Stop Logging    RwCoreFailAndRestart
-    ...          AND             Announce Message    END TEST RwCoreFailAndRestart
-    ${of_id}=    Wait Until Keyword Succeeds    ${timeout}    15s    Validate OLT Device in ONOS    ${olt_serial_number}
-    Set Global Variable    ${of_id}
-    FOR    ${I}    IN RANGE    0    ${num_onus}
-        ${src}=    Set Variable    ${hosts.src[${I}]}
-        ${dst}=    Set Variable    ${hosts.dst[${I}]}
-        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
-        ${onu_port}=    Wait Until Keyword Succeeds    ${timeout}    2s    Get ONU Port in ONOS    ${src['onu']}
-        ...    ${of_id}
-        # Bring up the device and verify it authenticates
-        Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device    ENABLED    ACTIVE    REACHABLE
-        ...    ${onu_device_id}    onu=True    onu_reason=omci-flows-pushed
-        Wait Until Keyword Succeeds    ${timeout}    2s    Verify Eapol Flows Added For ONU    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}    ${onu_port}
-        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate Authentication    True
-        ...    ${src['dp_iface_name']}    wpa_supplicant.conf    ${src['ip']}    ${src['user']}    ${src['pass']}
-        ...    ${src['container_type']}    ${src['container_name']}
-        Wait Until Keyword Succeeds    ${timeout}    2s    Verify ONU in AAA-Users    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}     ${onu_port}
-    END
-
-    # Scale down the rw-core deployment to 0 PODs and once confirmed, scale it back to 1
-    Scale K8s Deployment    voltha    voltha-rw-core    0
-    Wait Until Keyword Succeeds    ${timeout}    2s    Pod Does Not Exist    voltha    voltha-rw-core
-    # Ensure the ofagent POD goes "not-ready" as expected
-    Wait Until keyword Succeeds    ${timeout}    2s
-    ...    Check Expected Available Deployment Replicas    voltha    voltha-ofagent    0
-    # Scale up the core deployment and make sure both it and the ofagent deployment are back
-    Scale K8s Deployment    voltha    voltha-rw-core    1
-    Wait Until Keyword Succeeds    ${timeout}    2s
-    ...    Check Expected Available Deployment Replicas    voltha    voltha-rw-core    1
-    Wait Until Keyword Succeeds    ${timeout}    2s
-    ...    Check Expected Available Deployment Replicas    voltha    voltha-ofagent    1
-    # For some reason scaling down and up the POD behind a service causes the port forward to stop working,
-    # so restart the port forwarding for the API service
-    Restart VOLTHA Port Foward    voltha-api-minimal
-    # Ensure that the ofagent pod is up and ready and the device is available in ONOS, this
-    # represents system connectivity being restored
-    Wait Until Keyword Succeeds    ${timeout}    2s    Device Is Available In ONOS
-    ...    http://karaf:karaf@${k8s_node_ip}:${ONOS_REST_PORT}    ${of_id}
-
-    FOR    ${I}    IN RANGE    0    ${num_onus}
-        # Add subscriber access and verify that DHCP completes to ensure system is still functioning properly
-        Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}    volt-add-subscriber-access ${of_id} ${onu_port}
-        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate DHCP and Ping    True
-        ...    True    ${src['dp_iface_name']}    ${src['s_tag']}    ${src['c_tag']}    ${dst['dp_iface_ip_qinq']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
-        ...    ${dst['dp_iface_name']}    ${dst['ip']}    ${dst['user']}    ${dst['pass']}    ${dst['container_type']}
-        ...    ${dst['container_name']}
-        Wait Until Keyword Succeeds    ${timeout}    2s    Run Keyword And Continue On Failure
-        ...    Validate Subscriber DHCP Allocation    ${k8s_node_ip}    ${ONOS_SSH_PORT}    ${onu_port}
-    END
-
-Sanity E2E Test for OLT/ONU on POD With OLT Adapters Fail and Restart
-    [Documentation]    Deploys an device instance and waits for it to authenticate. After
-    ...    authentication is successful the rw-core deployment is scaled to 0 instances to
-    ...    simulate a POD crash. The test then scales the rw-core back to a single instance
-    ...    and configures ONOS for access. The test succeeds if the device is able to
-    ...    complete the DHCP sequence.
-    [Tags]    bbsim    olt-adapter-restart
-    [Setup]    Run Keywords    Announce Message    START TEST OltAdapterRestart
-    ...        AND             Start Logging    OltAdapterRestart
-    ...        AND             Clear All Devices Then Create New Device
-    [Teardown]   Run Keywords    Collect Logs
-    ...          AND             Stop Logging    OltAdapterRestart
-    ...          AND             Announce Message    END TEST OltAdapterRestart
-    ${of_id}=    Wait Until Keyword Succeeds    ${timeout}    15s    Validate OLT Device in ONOS    ${olt_serial_number}
-    Set Global Variable    ${of_id}
-
-    FOR    ${I}    IN RANGE    0    ${num_onus}
-        ${src}=    Set Variable    ${hosts.src[${I}]}
-        ${dst}=    Set Variable    ${hosts.dst[${I}]}
-        ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
-        ${onu_port}=    Wait Until Keyword Succeeds    ${timeout}    2s    Get ONU Port in ONOS    ${src['onu']}
-        ...    ${of_id}
-
-        # Bring up the device and verify it authenticates
-        Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device        ENABLED    ACTIVE    REACHABLE
-        ...    ${onu_device_id}    onu=True    onu_reason=omci-flows-pushed
-        Wait Until Keyword Succeeds    ${timeout}    2s    Verify Eapol Flows Added For ONU    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}    ${onu_port}
-        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate Authentication    True
-        ...    ${src['dp_iface_name']}    wpa_supplicant.conf    ${src['ip']}    ${src['user']}    ${src['pass']}
-        ...    ${src['container_type']}    ${src['container_name']}
-        Wait Until Keyword Succeeds    ${timeout}    2s    Verify ONU in AAA-Users    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}     ${onu_port}
-    END
-
-    # Scale down the open OLT adapter deployment to 0 PODs and once confirmed, scale it back to 1
-    Scale K8s Deployment    voltha    adapter-open-olt    0
-    Wait Until Keyword Succeeds    ${timeout}    2s    Pod Does Not Exist    voltha    adapter-open-olt
-    # Scale up the open OLT adapter deployment and make sure both it and the ofagent deployment are back
-    Scale K8s Deployment    voltha   adapter-open-olt    1
-    Wait Until Keyword Succeeds    ${timeout}    2s
-    ...    Check Expected Available Deployment Replicas    voltha    adapter-open-olt    1
-
-    # Ensure the device is available in ONOS, this represents system connectivity being restored
-    Wait Until Keyword Succeeds    ${timeout}    2s    Device Is Available In ONOS
-    ...    http://karaf:karaf@${k8s_node_ip}:${ONOS_REST_PORT}    ${of_id}
-
-    FOR    ${I}    IN RANGE    0    ${num_onus}
-        # Add subscriber access and verify that DHCP completes to ensure system is still functioning properly
-        Wait Until Keyword Succeeds    ${timeout}    2s    Execute ONOS CLI Command    ${k8s_node_ip}
-        ...    ${ONOS_SSH_PORT}    volt-add-subscriber-access ${of_id} ${onu_port}
-        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate DHCP and Ping    True
-        ...    True    ${src['dp_iface_name']}    ${src['s_tag']}    ${src['c_tag']}    ${dst['dp_iface_ip_qinq']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
-        ...    ${dst['dp_iface_name']}    ${dst['ip']}    ${dst['user']}    ${dst['pass']}    ${dst['container_type']}
-        ...    ${dst['container_name']}
-        Wait Until Keyword Succeeds    ${timeout}    2s    Run Keyword And Continue On Failure
-        ...    Validate Subscriber DHCP Allocation    ${k8s_node_ip}    ${ONOS_SSH_PORT}    ${onu_port}
-    END
 
 Test Disable and Enable ONU and check authentication
     [Documentation]    Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
     ...    Perform disable on the ONUs and validate that the authentication do not succeed
     ...    Perform enable on the ONUs and validate that authentication successful
-    [Tags]    functional    DisableEnableONU_AuthCheck    notready
-    [Setup]    None
-    [Teardown]    None
+    [Tags]    functional    DisableONU_AuthCheck
+    # Creates Devices in the Setup
+    [Setup]    Run Keywords    Announce Message    START TEST DisableDeleteONUandOLT
+    ...        AND             Start Logging    DisableONU_AuthCheck
+    ...        AND    Setup
+    [Teardown]    Run Keywords    Collect Logs
+    ...           AND             Stop Logging    DisableONU_AuthCheck
+    ...           AND             Announce Message    END TEST DisableONU_AuthCheck
+    ...           AND             Delete Device and Verify
+    Run Keyword and Ignore Error    Collect Logs
+    Run Keyword If    ${has_dataplane}    Clean Up Linux
+    Wait Until Keyword Succeeds    ${timeout}    2s    Perform Sanity Test
+    Clean WPA Process
     FOR    ${I}    IN RANGE    0    ${num_onus}
         ${src}=    Set Variable    ${hosts.src[${I}]}
         ${dst}=    Set Variable    ${hosts.dst[${I}]}
+        Run Keyword and Ignore Error    Collect Logs
         ${onu_device_id}=    Get Device ID From SN    ${src['onu']}
         ${onu_port}=    Wait Until Keyword Succeeds    ${timeout}    2s    Get ONU Port in ONOS    ${src['onu']}
         ...    ${of_id}
         Disable Device    ${onu_device_id}
         Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device    DISABLED    UNKNOWN
         ...    REACHABLE    ${src['onu']}    onu=false
-        Run Keyword If    ${has_dataplane}    Wait Until Keyword Succeeds    ${timeout}    2s
-        ...    Validate Authentication After Reassociate    False    ${src['dp_iface_name']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}
+        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate Authentication    False
+        ...    ${src['dp_iface_name']}    wpa_supplicant.conf    ${src['ip']}    ${src['user']}    ${src['pass']}
         ...    ${src['container_type']}    ${src['container_name']}
-	Enable Device    ${onu_device_id}
-	Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device
-	...    ENABLED    ACTIVE    REACHABLE    ${src['onu']}    onu=True    onu_reason=omci-flows-pushed
-        Run Keyword If    ${has_dataplane}    Wait Until Keyword Succeeds    ${timeout}    2s
-        ...    Validate Authentication After Reassociate    True    ${src['dp_iface_name']}
-        ...    ${src['ip']}    ${src['user']}    ${src['pass']}
+        Enable Device    ${onu_device_id}
+        Run Keyword And Ignore Error    Kill Linux Process    [w]pa_supplicant    ${src['ip']}
+        ...    ${src['user']}    ${src['pass']}    ${src['container_type']}    ${src['container_name']}
+        Run Keyword and Ignore Error    Collect Logs
+        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s    Validate Device
+        ...    ENABLED    ACTIVE    REACHABLE    ${src['onu']}    onu=True    onu_reason=omci-flows-pushed
+        Run Keyword If    ${has_dataplane}    Run Keyword And Continue On Failure    Validate Authentication    True
+        ...    ${src['dp_iface_name']}    wpa_supplicant.conf    ${src['ip']}    ${src['user']}    ${src['pass']}
         ...    ${src['container_type']}    ${src['container_name']}
         Run Keyword and Ignore Error    Get Device Output from Voltha    ${onu_device_id}
     END
     Run Keyword and Ignore Error    Collect Logs
 
+
 *** Keywords ***
 Setup Suite
     [Documentation]    Set up the test suite