# Copyright 2017 - present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Tests can be enabled by passing the following tags:
# - [setup] Creates and enable the OLT devices
# - [activation] Checks that ONUs are active in VOLTHA and ports discevered in ONOS
# - [flow-before] Checks that flows are pushed (before subscriber provisioning)
# - [authentication] Checks that subscribers are correctly authenticated
# - [provision] Provision the data-plane flows for all the subscribers
# - [flow-after] Checks that flows are pushed (after subscriber provisioning)
# - [dhcp] Checks that subscribers have received an IP
#
# To run the full test:
#   robot Voltha_Scale_Tests.robot
#
# To run only ceratain tests:
#   robot -i activation -i flow-before Voltha_Scale_Tests.robot
#
# To exclude only ceratain tests:
#   robot -e -i flow-before Voltha_Scale_Tests.robot
#
# Once te test complete you can extrapolate the results by using
#   python extract-times.py

*** Settings ***
Documentation     Collect measurements on VOLTHA performances
Suite Setup       Setup Suite
#Test Setup        Setup
#Test Teardown     Teardown
Suite Teardown    Teardown Suite
Library           Collections
Library           String
Library           OperatingSystem
Library           XML
Library           RequestsLibrary
Library           ../../libraries/DependencyLibrary.py
Resource          ../../libraries/onos.robot
Resource          ../../libraries/voltctl.robot
Resource          ../../libraries/voltha.robot
Resource          ../../libraries/flows.robot
Resource          ../../libraries/k8s.robot
Resource          ../../libraries/utils.robot
Resource          ../../libraries/bbsim.robot
Resource          ../../variables/variables.robot

*** Variables ***
${ONOS_SSH_IP}  127.0.0.1
${ONOS_SSH_PORT}    8101
${ONOS_REST_IP}  127.0.0.1
${ONOS_REST_PORT}    8181

${BBSIM_REST_IP}    127.0.0.1
${BBSIM_REST_PORT}    50071

${NAMESPACE}      default

# Scale pipeline values
${stackId}  1
${olt}  1
${pon}  1
${onu}  1

${enableFlowProvisioning}   true
${enableSubscriberProvisioning}     true

${workflow}     att
${withEapol}    false
${withDhcp}    false
${withIgmp}    false
# as of now the LLDP flow is always installed
${withLLDP}   true

# Per-test logging on failure is turned off by default; set this variable to enable
${container_log_dir}    ${None}

${timeout}    10m

*** Test Cases ***

Create and Enable devices
    [Documentation]  Create and enable the OLTs in VOLTHA
    [Tags]      non-critical    setup
    ${olt_device_ids}=      Create List
    FOR    ${INDEX}    IN RANGE    0    ${olt}
        ${olt_device_id}=    Create Device  bbsim${INDEX}     50060     openolt
        Enable Device    ${olt_device_id}
        Append To List  ${olt_device_ids}    ${olt_device_id}
    END

    Set Suite Variable    ${olt_device_ids}

Onu Activation in VOLTHA
    [Documentation]    Check that all ONUs reach the ACTIVE/ENABLED state in VOLTHA
    [Tags]      non-critical    activation    plot-voltha-onus
    Wait For ONUs In VOLTHA     ${total_onus}

Port Discovery in ONOS
    [Documentation]    Check that all the UNI ports show up in ONOS
    [Tags]      non-critical    activation    plot-onos-ports
    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Wait for Ports in ONOS      ${onos_ssh_connection}  ${total_onus_per_olt}   ${deviceId}     BBSM
    END

Flows validation in VOLTHA before subscriber provisioning
    [Documentation]    Check that all the flows has been stored in the logical device
    [Tags]      non-critical    flow-before   plot-voltha-flows-before
    # NOTE fail the test immediately if we're trying to check flows without provisioning them
    Should Be Equal   ${enableFlowProvisioning}     true
    Wait for Logical Devices flows   ${workflow}    ${total_onus}    ${olt}    false
    ...     ${withEapol}    ${withDhcp}     ${withIgmp}    ${withLLDP}

Flows validation in VOLTHA Adapters before subscriber provisioning
    [Documentation]  Check that all flows has been store in devices of type openolt
    [Tags]      non-critical    flow-before   plot-voltha-openolt-flows-before  only-me
    Should Be Equal   ${enableFlowProvisioning}     true
    Wait for OpenOLT Devices flows   ${workflow}    ${total_onus}    ${olt}    false
    ...     ${withEapol}    ${withDhcp}     ${withIgmp}    ${withLLDP}

Flows validation in ONOS before subscriber provisioning
    [Documentation]    Check that all the flows has been acknowledged
    [Tags]      non-critical    flow-before   plot-onos-flows-before
    # NOTE fail the test immediately if we're trying to check flows without provisioning them
    Should Be Equal   ${enableFlowProvisioning}     true

    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Wait for all flows to in ADDED state    ${onos_ssh_connection}
        ...     ${deviceId}     ${workflow}    ${total_onus_per_olt}    1    false
        ...     ${withEapol}    ${withDhcp}     ${withIgmp}   ${withLLDP}
    END

Wait for subscribers to be Authenticated
    [Documentation]    Check that all subscribers have successfully authenticated
    [Tags]      non-critical    authentication    plot-onos-auth

    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Wait for AAA Authentication     ${onos_ssh_connection}  ${total_onus_per_olt}   ${deviceId}
    END

Provision subscribers
    [Documentation]    Provision data plane flows for all the subscribers
    [Tags]      non-critical    provision
    Should Be Equal   ${enableSubscriberProvisioning}     true
    ${onos_devices}=    Compute Device IDs
    FOR     ${olt}  IN  @{onos_devices}
        Provision all subscribers on device  ${onos_ssh_connection}     ${ONOS_SSH_IP}     ${ONOS_REST_PORT}  ${olt}
    END

Flows validation in VOLTHA after subscriber provisioning
    [Documentation]    Check that all the flows has been stored in the logical device
    [Tags]      non-critical    flow-after    plot-voltha-flows-after
    # NOTE fail the test immediately if we're trying to check flows without provisioning them
    Should Be Equal   ${enableFlowProvisioning}     true

    Wait for Logical Devices flows   ${workflow}    ${total_onus}    ${olt}    true
    ...     ${withEapol}    ${withDhcp}     ${withIgmp}    ${withLLDP}

Flows validation in VOLTHA Adapters after subscriber provisioning
    [Documentation]  Check that all flows has been store in devices of type openolt
    [Tags]      non-critical    flow-after   plot-voltha-openolt-flows-after    only-me
    Should Be Equal   ${enableFlowProvisioning}     true
    Wait for OpenOLT Devices flows   ${workflow}    ${total_onus}    ${olt}    true
    ...     ${withEapol}    ${withDhcp}     ${withIgmp}    ${withLLDP}

Flows validation in ONOS after subscriber provisioning
    [Documentation]    Check that all the flows has been acknowledged
    [Tags]      non-critical    flow-after    plot-onos-flows-after
    # NOTE fail the test immediately if we're trying to check flows without provisioning them
    Should Be Equal   ${enableFlowProvisioning}     true

    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Wait for all flows to in ADDED state    ${onos_ssh_connection}
        ...     ${deviceId}     ${workflow}    ${total_onus_per_olt}    1    true
        ...     ${withEapol}    ${withDhcp}     ${withIgmp}   ${withLLDP}
    END

Wait for subscribers to have an IP
    [Documentation]    Check that all subscribers have received a DHCP_ACK
    [Tags]      non-critical    dhcp  plot-onos-dhcp
    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Wait for DHCP Ack     ${onos_ssh_connection}  ${total_onus_per_olt}     ${workflow}     ${deviceId}
    END

Perform Igmp Join
    [Documentation]    Performs Igmp Join for all the ONUs of all the OLTs (based on Rest Endpoint)
    [Tags]    non-critical    igmp    igmp-join
    FOR    ${INDEX}    IN RANGE    0    ${olt}
        ${bbsim_rel}=    Catenate    SEPARATOR=    bbsim    ${INDEX}
        ${bbsim_rel_local_port}=    Evaluate    ${BBSIM_REST_PORT}+${INDEX}
        Create Session    ${bbsim_rel}    http://${BBSIM_REST_IP}:${bbsim_rel_local_port}
        ${bbsim_pod}=    Get Pod Name By Label    ${NAMESPACE}    release     ${bbsim_rel}
        ${onu_list}=    Get ONUs List    ${NAMESPACE}    ${bbsim_pod}
        Perform Igmp Join or Leave Per OLT    ${bbsim_rel}    ${onu_list}    join
        List Service    ${NAMESPACE}    ${bbsim_pod}
    END

Wait for ONUs Join Igmp Group
    [Documentation]    Checks the ONUs Join the IGMP Group
    ...    Note: Currently, it expects all the ONUs on an OLT joined the same group
    [Tags]    non-critical    igmp    igmp-join    igmp-count-verify    igmp-join-count-verify
    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s
        ...    Verify ONUs in Group Count in ONOS    ${onos_ssh_connection}    ${total_onus_per_olt}    ${deviceId}
    END

Perform Igmp Leave
    [Documentation]    Performs Igmp Leave for all the ONUs of all the OLTs (based on Rest Endpoint)
    [Tags]    non-critical    igmp    igmp-leave
    FOR    ${INDEX}    IN RANGE    0    ${olt}
        ${bbsim_rel}=    Catenate    SEPARATOR=    bbsim    ${INDEX}
        ${bbsim_rel_local_port}=    Evaluate    ${BBSIM_REST_PORT}+${INDEX}
        Create Session    ${bbsim_rel}    http://${BBSIM_REST_IP}:${bbsim_rel_local_port}
        ${bbsim_pod}=    Get Pod Name By Label    ${NAMESPACE}    release     ${bbsim_rel}
        ${onu_list}=    Get ONUs List    ${NAMESPACE}    ${bbsim_pod}
        Perform Igmp Join or Leave Per OLT    ${bbsim_rel}    ${onu_list}    leave
        List Service    ${NAMESPACE}    ${bbsim_pod}
    END

Wait for ONUs Leave Igmp Group
    [Documentation]    Checks the ONUs Leave the IGMP Group
    ...    Note: Currently, it expects all the ONUs on an OLT left the same group
    [Tags]    non-critical    igmp    igmp-leave    igmp-count-verify    igmp-leave-count-verify
    ${onos_devices}=    Compute Device IDs
    FOR     ${deviceId}     IN  @{onos_devices}
        Run Keyword And Continue On Failure    Wait Until Keyword Succeeds    ${timeout}    5s
        ...    Verify Empty Group in ONOS    ${onos_ssh_connection}    ${deviceId}
    END

Disable and Delete devices
    [Documentation]  Disable and delete the OLTs in VOLTHA
    [Tags]      non-critical    teardown
    FOR    ${olt_device_id}    IN  @{olt_device_ids}
        Disable Device  ${olt_device_id}
        Delete Device  ${olt_device_id}
        Remove Values From List     ${olt_device_ids}   ${olt_device_id}
    END

    Set Suite Variable    ${olt_device_ids}

*** Keywords ***
Setup Suite
    [Documentation]    Setup test global variables, open an SSH connection to ONOS and starts a timer
    Set Suite Variable    ${KUBECTL_CONFIG}    export KUBECONFIG=%{KUBECONFIG}
    Set Suite Variable    ${VOLTCTL_CONFIG}    %{VOLTCONFIG}

    ${total_onus}=   Evaluate    ${olt} * ${pon} * ${onu}
    Set Suite Variable  ${total_onus}

    ${total_onus_per_olt}=   Evaluate    ${pon} * ${onu}
    Set Suite Variable  ${total_onus_per_olt}

    ${onos_auth}=    Create List    karaf    karaf
    Create Session    ONOS    http://${ONOS_REST_IP}:${ONOS_REST_PORT}    auth=${ONOS_AUTH}
    Run Keyword If    '${workflow}'=='tt'
    ...    Send File To Onos    ${CURDIR}/../../tests/data/onos-igmp.json    apps/

    ${onos_ssh_connection}    Open ONOS SSH Connection    ${ONOS_SSH_IP}    ${ONOS_SSH_PORT}
    Set Suite Variable  ${onos_ssh_connection}

Teardown Suite
   [Documentation]    Close the SSH connection to ONOS
    Close ONOS SSH Connection   ${onos_ssh_connection}

Compute device IDs
    [Documentation]  Creates a list of ONOS device ID based on the test configuration
    # TODO read ${olt} and ${stackid} from parameters
    ${base}=    Set Variable    of:00000a0a0a0a0a
    ${device_ids}=      Create List
    FOR    ${olt_id}    IN RANGE    0    ${olt}
        ${decimal_id}=  Catenate    SEPARATOR=  ${stackid}  ${olt_id}
        ${piece}=   Convert To Hex  ${decimal_id}  length=2    lowercase=yes
        ${id}=  Catenate    SEPARATOR=  ${base}     ${piece}
        Append To List  ${device_ids}    ${id}
    END

    [Return]    ${device_ids}

Perform Igmp Join or Leave Per OLT
    [Documentation]    Performs Igmp Join for all the ONUs of an OLT (based on Rest Endpoint)
    [Arguments]    ${bbsim_rel_session}    ${onu_list}    ${task}
    FOR    ${onu}    IN    @{onu_list}
        JoinOrLeave Igmp Rest Based    ${bbsim_rel_session}    ${onu}    ${task}    224.0.0.22
    END