[VOL-3613] OpenOnu-Go-Adapter: Introduction of new onu reasons
Change-Id: I652b181f9afe8f4dd83451385868d0af9a06b27b
diff --git a/tests/openonu-go-adapter/Voltha_ONUStateTests.robot b/tests/openonu-go-adapter/Voltha_ONUStateTests.robot
index 999e34e..c772a00 100755
--- a/tests/openonu-go-adapter/Voltha_ONUStateTests.robot
+++ b/tests/openonu-go-adapter/Voltha_ONUStateTests.robot
@@ -16,6 +16,7 @@
Resource ../../libraries/utils.robot
Resource ../../libraries/k8s.robot
Resource ../../variables/variables.robot
+Resource Voltha_ONUUtilities.robot
*** Variables ***
${timeout} 180s
@@ -62,7 +63,13 @@
[Setup] Run Keywords Start Logging ONUStateTest
... AND Setup Test
Run Keyword If ${has_dataplane} Clean Up Linux
- Enable Device ${olt_device_id}
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #get olt serial number
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
+ Enable Device ${olt_device_id}
+ END
${timeStart} = Get Current Date
Set Global Variable ${timeStart}
Run Keyword If "${testmode}"=="SingleState" Do ONU Single State Test
@@ -163,7 +170,7 @@
${skipped}= Evaluate "\\033[33m${SPACE*14} ===> Test case above was skipped! <=== ${SPACE*15}\\033[0m"
${skip_message} Catenate ${skipped} | ${skip} |
Set Suite Variable ${skip_message}
- Run Keyword If ${num_onus}>4 Calculate Timeout
+ Run Keyword If ${num_all_onus}>4 Calculate Timeout
${techprofile}= Set Variable If "${techprofile}"=="1T1GEM" default ${techprofile}
Run Keyword If "${techprofile}"=="default" Log To Console \nTechProfile:default (1T1GEM)
... ELSE IF "${techprofile}"=="1T4GEM" Set Tech Profile 1T4GEM
@@ -202,18 +209,27 @@
Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s Openolt is Up
... ${olt_ssh_ip} ${olt_user} ${olt_pass}
Run Keyword If ${has_dataplane} Sleep 60s
- #create/preprovision device
- ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
- Set Suite Variable ${olt_device_id}
- #validate olt states
- Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
- ... ${olt_device_id}
- Sleep 5s
+ # Create a list of olt ids (logical and device_id)
+ ${olt_ids} Create List
+ FOR ${I} IN RANGE 0 ${num_olts}
+ #create/preprovision device
+ ${olt_device_id}= Create Device ${list_olts}[${I}][ip] ${OLT_PORT}
+ ${olt_serial_number}= Set Variable ${list_olts}[${I}][sn]
+ #validate olt states
+ Wait Until Keyword Succeeds ${timeout} 5s
+ ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${olt_device_id}
+ Sleep 5s
+ ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
+ ${olt} Create Dictionary device_id ${olt_device_id} logical_id ${logical_id}
+ ... of_id ${of_id} sn ${olt_serial_number}
+ Append To List ${olt_ids} ${olt}
+ END
+ Set Global Variable ${olt_ids}
Calculate Timeout
[Documentation] Calculates the timeout regarding num-onus in case of more than 4 onus
${timeout} Fetch From Left ${timeout} s
- ${timeout}= evaluate ${timeout}+((${num_onus}-4)*30)
+ ${timeout}= evaluate ${timeout}+((${num_all_onus}-4)*30)
${timeout}= Set Variable If (not ${debugmode}) and (${timeout}>600) 600 ${timeout}
${timeout}= Catenate SEPARATOR= ${timeout} s
Set Suite Variable ${timeout}
@@ -221,7 +237,7 @@
Do ONU Up To State Test
[Documentation] This keyword performs Up2State Test
... All states up to the passed have to be checked
- FOR ${I} IN RANGE 0 ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
Run Keyword If ${onu_state_nb}>=1
@@ -253,7 +269,7 @@
Do ONU Single State Test
[Documentation] This keyword performs SingleState Test
... Only the passed state has to be checked
- FOR ${I} IN RANGE 0 ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
@@ -277,16 +293,30 @@
Do Onu Port Check
[Documentation] Check that all the UNI ports show up in ONOS
- Wait for Ports in ONOS ${onos_ssh_connection} ${num_onus} BBSM
+ Wait for Ports in ONOS ${onos_ssh_connection} ${num_all_onus} BBSM
Do Onu Flow Check
- [Documentation] Check that all ONU flows show up in ONOS and Voltha
- ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
- ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
- ... Get NNI Port in ONOS ${of_id}
- FOR ${I} IN RANGE 0 ${num_onus}
+ [Documentation] This keyword iterate all OLTs and performs Do Onu Flow Check Per OLT
+ FOR ${J} IN RANGE 0 ${num_olts}
+ ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn]
+ ${onu_count}= Set Variable ${list_olts}[${J}][onucount]
+ ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS
+ ... ${olt_serial_number}
+ Set Global Variable ${of_id}
+ ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
+ ... Get NNI Port in ONOS ${of_id}
+ Set Global Variable ${nni_port}
+ # Verify Default Meter in ONOS (valid only for ATT)
+ Do Onu Flow Check Per OLT ${of_id} ${nni_port} ${olt_serial_number} ${onu_count}
+ END
+
+Do Onu Flow Check Per OLT
+ [Documentation] Check per OLT that all ONU flows show up in ONOS and Voltha
+ [Arguments] ${of_id} ${nni_port} ${olt_serial_number} ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
+ Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
... Get ONU Port in ONOS ${src['onu']} ${of_id}
@@ -344,17 +374,20 @@
@{resultList} Split String ${result} separator=,
${num_of_count_matches}= Get Match Count ${resultList} "num_gem_ports": ${num_gem_ports}
... whitespace_insensitive=True
- ${num_of_expected_matches}= Run Keyword If "${techprofile}"=="default" Evaluate ${num_onus}
- ... ELSE Evaluate ${num_onus}+1
+ ${num_of_expected_matches}= Run Keyword If "${techprofile}"=="default" Evaluate ${num_all_onus}
+ ... ELSE Evaluate ${num_all_onus}+1
Run Keyword If ${num_of_expected_matches}!=${num_of_count_matches} Log To Console
... \nTechProfile (${TechProfile}) not loaded correctly:${num_of_count_matches} of ${num_of_expected_matches}
Do Disable Enable Onu Test
[Documentation] This keyword disables/enables all onus and checks the states.
[Arguments] ${state2check}=${state2test} ${checkstatebeforedisable}=True
+ ... ${state2checkafterdisable}=tech-profile-config-delete-success
Run Keyword If ${checkstatebeforedisable} Do Current State Test All Onus ${state2check}
Do Disable Onu Device
- Do Current State Test All Onus omci-admin-lock
+ ${alternative_onu_reason}= Set Variable If '${state2checkafterdisable}'=='tech-profile-config-delete-success'
+ ... omci-flows-deleted ${EMPTY}
+ Do Current State Test All Onus ${state2checkafterdisable} alternativeonustate=${alternative_onu_reason}
Log Ports
#check no port is enabled in ONOS
Wait for Ports in ONOS ${onos_ssh_connection} 0 BBSM
@@ -362,7 +395,7 @@
Do Current State Test All Onus ${state2check}
Log Ports onlyenabled=True
#check that all the UNI ports show up in ONOS again
- Wait for Ports in ONOS ${onos_ssh_connection} ${num_onus} BBSM
+ Wait for Ports in ONOS ${onos_ssh_connection} ${num_all_onus} BBSM
Do Reconcile Onu Device
[Documentation] This keyword reconciles ONU device and check the state afterwards.
@@ -390,26 +423,30 @@
[Documentation] This keyword power off/on all onus and checks the states.
Do Power Off ONU Device
Sleep 5s
- Do Current State Test All Onus stopping-openomci
+ #Do Current State Test All Onus stopping-openomci
+ Do Current State Test All Onus tech-profile-config-delete-success
+ ... ENABLED DISCOVERED UNREACHABLE alternativeonustate=omci-flows-deleted
Do Power On ONU Device
Do Current State Test All Onus ${state2test}
Do Soft Reboot Onu Device
[Documentation] This keyword reboots softly all onus and checks the states.
${namespace}= Set Variable voltha
- FOR ${I} IN RANGE 0 ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${onu_device_id}= Get Device ID From SN ${src['onu']}
Reboot ONU ${onu_device_id} False
END
- Run Keyword Unless ${has_dataplane} Do Current State Test All Onus rebooting
+ Run Keyword Unless ${has_dataplane} Do Current State Test All Onus tech-profile-config-delete-success
+ ... ENABLED DISCOVERED REACHABLE alternativeonustate=omci-flows-deleted
Run Keyword Unless ${has_dataplane} Do Disable Enable Onu Test checkstatebeforedisable=False
+ ... state2checkafterdisable=omci-admin-lock
Run Keyword If ${has_dataplane} Do Current State Test All Onus omci-flows-pushed
Do Onu Port Check
Do Disable Onu Device
[Documentation] This keyword disables all onus.
- FOR ${I} IN RANGE 0 ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${onu_device_id}= Get Device ID From SN ${src['onu']}
Disable Device ${onu_device_id}
@@ -418,7 +455,7 @@
Do Enable Onu Device
[Documentation] This keyword enables all onus.
- FOR ${I} IN RANGE 0 ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${onu_device_id}= Get Device ID From SN ${src['onu']}
Enable Device ${onu_device_id}
@@ -427,95 +464,8 @@
Do Power Off ONU Device
[Documentation] This keyword power off all onus.
${namespace}= Set Variable voltha
- FOR ${I} IN RANGE 0 ${num_onus}
+ FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${result}= Exec Pod ${namespace} bbsim bbsimctl onu shutdown ${src['onu']}
Should Contain ${result} successfully msg=Can not shutdown ${src['onu']} values=False
END
-
-Do Power On ONU Device
- [Documentation] This keyword power on all onus.
- ${namespace}= Set Variable voltha
- FOR ${I} IN RANGE 0 ${num_onus}
- ${src}= Set Variable ${hosts.src[${I}]}
- ${result}= Exec Pod ${namespace} bbsim bbsimctl onu poweron ${src['onu']}
- Should Contain ${result} successfully msg=Can not poweron ${src['onu']} values=False
- END
-
-Do Current State Test
- [Documentation] This keyword checks the passed state of the given onu.
- [Arguments] ${state} ${onu}
- ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= Map State ${state}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
- ... Validate Device ${admin_state} ${oper_status} ${connect_status}
- ... ${onu} onu=True onu_reason=${onu_state}
-
-Do Current State Test All Onus
- [Documentation] This keyword checks the passed state of all onus.
- ... Hint: ${timeStart} will be not evaluated here!
- [Arguments] ${state}
- ${list_onus} Create List
- Build ONU SN List ${list_onus}
- ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= Map State ${state}
- Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
- ... Validate ONU Devices With Duration
- ... ${admin_state} ${oper_status} ${connect_status}
- ... ${onu_state} ${list_onus} ${timeStart}
-
-Log Ports
- [Documentation] This keyword logs all port data available in ONOS of first port per ONU
- [Arguments] ${onlyenabled}=False
- ${cmd} Set Variable If ${onlyenabled} ports -e ports
- ${onu_ports}= Execute ONOS CLI Command on open connection ${onos_ssh_connection} ${cmd}
- ${lines} = Get Lines Matching Regexp ${onu_ports} .*portName=BBSM[0-9]{8}-1
- Log ${lines}
-
-Kill Adaptor
- [Documentation] This keyword kills the passed adaptor.
- [Arguments] ${namespace} ${name}
- ${cmd} Catenate
- ... kubectl exec -it -n voltha $(kubectl get pods -n ${namespace} | grep ${name} | awk 'NR==1{print $1}')
- ... -- /bin/sh -c "kill 1"
- ${rc} ${output}= Run and Return Rc and Output ${cmd}
- Log ${output}
-
-Delete MIB Template Data
- [Documentation] This keyword deletes MIB Template Data stored in etcd
- ${namespace}= Set Variable default
- ${podname}= Set Variable etcd
- ${commanddel} Catenate
- ... /bin/sh -c 'ETCDCTL_API=3 etcdctl del --prefix service/voltha/omci_mibs/go_templates/'
- ${result}= Exec Pod ${namespace} ${podname} ${commanddel}
- Sleep 3s
- ${commandget} Catenate
- ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/omci_mibs/go_templates/'
- ${result}= Exec Pod ${namespace} ${podname} ${commandget}
- Should Be Empty ${result} Could not delete MIB Template Data stored in etcd!
-
-Map State
- [Documentation] This keyword converts the passed numeric value or name of a onu state to its state values.
- [Arguments] ${state}
- # create state lists with corresponding return values
- # ADMIN-STATE OPER-STATUS CONNECT-STATUS ONU-STATE (number/name)
- ${state1} Create List ENABLED ACTIVATING REACHABLE 1 activating-onu
- ${state2} Create List ENABLED ACTIVATING REACHABLE 2 starting-openomci
- ${state3} Create List ENABLED ACTIVATING REACHABLE 3 discovery-mibsync-complete
- ${state4} Create List ENABLED ACTIVE REACHABLE 4 initial-mib-downloaded
- ${state5} Create List ENABLED ACTIVE REACHABLE 5 tech-profile-config-download-success
- ${state6} Create List ENABLED ACTIVE REACHABLE 6 omci-flows-pushed
- ${state7} Create List DISABLED UNKNOWN REACHABLE 7 omci-admin-lock
- ${state8} Create List ENABLED ACTIVE REACHABLE 8 onu-reenabled
- ${state9} Create List ENABLED DISCOVERED UNREACHABLE 9 stopping-openomci
- ${state10} Create List ENABLED DISCOVERED REACHABLE 10 rebooting
- ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= Set Variable If
- ... '${state}'=='1' or '${state}'=='activating-onu' ${state1}
- ... '${state}'=='2' or '${state}'=='starting-openomci' ${state2}
- ... '${state}'=='3' or '${state}'=='discovery-mibsync-complete' ${state3}
- ... '${state}'=='4' or '${state}'=='initial-mib-downloaded' ${state4}
- ... '${state}'=='5' or '${state}'=='tech-profile-config-download-success' ${state5}
- ... '${state}'=='6' or '${state}'=='omci-flows-pushed' ${state6}
- ... '${state}'=='7' or '${state}'=='omci-admin-lock' ${state7}
- ... '${state}'=='8' or '${state}'=='onu-reenabled' ${state8}
- ... '${state}'=='9' or '${state}'=='stopping-openomci' ${state9}
- ... '${state}'=='10' or '${state}'=='rebooting' ${state10}
- [Return] ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}