blob: e776ed50b52b93e1b3521bc8fef0e0fed7f409b2 [file] [log] [blame]
Kailash92764922019-07-25 08:21:39 -07001# Copyright 2017-present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
Kailash92764922019-07-25 08:21:39 -070014# robot test functions
15
16*** Settings ***
17Documentation Library for various utilities
18Library SSHLibrary
Kailash92764922019-07-25 08:21:39 -070019Library String
20Library DateTime
21Library Process
22Library Collections
23Library RequestsLibrary
24Library OperatingSystem
25
26*** Keywords ***
Kailash528f7c02019-07-31 10:55:49 -070027Check CLI Tools Configured
28 [Documentation] Tests that use 'voltctl' and 'kubectl' should execute this keyword in suite setup
29 # check voltctl and kubectl configured
Zack Williamsa8fe75a2020-01-10 14:25:27 -070030 ${voltctl_rc}= Run And Return RC voltctl device list
31 ${kubectl_rc}= Run And Return RC kubectl get pods
Gilles Depatie675a2062019-10-22 12:44:42 -040032 Run Keyword If ${voltctl_rc} != 0 or ${kubectl_rc} != 0 FATAL ERROR
33 ... VOLTCTL and KUBECTL not configured. Please configure before executing tests.
Gilles Depatieb5682f82019-10-31 10:39:45 -040034
35Send File To Onos
Zack Williamsa8fe75a2020-01-10 14:25:27 -070036 [Documentation] Send the content of the file to Onos to selected section of configuration
37 ... using Post Request
38 [Arguments] ${CONFIG_FILE} ${section}
39 ${Headers}= Create Dictionary Content-Type application/json
40 ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE}
41 Log ${Headers}
42 Log ${File_Data}
43 ${resp}= Post Request ONOS
44 ... /onos/v1/network/configuration/${section} headers=${Headers} data=${File_Data}
45 Should Be Equal As Strings ${resp.status_code} 200
Andy Bavier88cd9f62019-11-26 16:22:33 -070046
47Common Test Suite Setup
48 [Documentation] Setup the test suite
49 # BBSim sanity test doesn't need these imports from other repositories
Andy Bavier88cd9f62019-11-26 16:22:33 -070050 Run Keyword If ${external_libs} Import Resource
Andy Baviera2691752019-11-27 12:18:38 -070051 ... ${CURDIR}/../../cord-tester/src/test/cord-api/Framework/Subscriber.robot
Andy Bavier88cd9f62019-11-26 16:22:33 -070052 Run Keyword If ${external_libs} Import Resource
Andy Baviera2691752019-11-27 12:18:38 -070053 ... ${CURDIR}/../../cord-tester/src/test/cord-api/Framework/OLT.robot
Andy Bavier88cd9f62019-11-26 16:22:33 -070054 Run Keyword If ${external_libs} Import Resource
Andy Baviera2691752019-11-27 12:18:38 -070055 ... ${CURDIR}/../../cord-tester/src/test/cord-api/Framework/DHCP.robot
Andy Bavier88cd9f62019-11-26 16:22:33 -070056 Run Keyword If ${external_libs} Import Resource
Andy Baviera2691752019-11-27 12:18:38 -070057 ... ${CURDIR}/../../cord-tester/src/test/cord-api/Framework/Kubernetes.robot
Andy Bavier88cd9f62019-11-26 16:22:33 -070058 Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG}
59 Set Global Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG}
60 ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip")
61 ${k8s_node_user}= Evaluate ${nodes}[0].get("user")
62 ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass")
63 Check CLI Tools Configured
64 ${onos_auth}= Create List karaf karaf
65 ${HEADERS} Create Dictionary Content-Type=application/json
66 Create Session ONOS http://${k8s_node_ip}:${ONOS_REST_PORT} auth=${ONOS_AUTH}
67 ${olt_ip}= Evaluate ${olts}[0].get("ip")
68 ${olt_user}= Evaluate ${olts}[0].get("user")
69 ${olt_pass}= Evaluate ${olts}[0].get("pass")
70 ${olt_serial_number}= Evaluate ${olts}[0].get("serial")
71 ${num_onus}= Get Length ${hosts.src}
72 ${num_onus}= Convert to String ${num_onus}
73 #send sadis file to onos
Andy Baviera2691752019-11-27 12:18:38 -070074 ${sadis_file}= Get Variable Value ${sadis.file}
Zack Williamsa8fe75a2020-01-10 14:25:27 -070075 Log To Console \nSadis File:${sadis_file}
Andy Bavier88cd9f62019-11-26 16:22:33 -070076 Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/
77 Set Suite Variable ${num_onus}
78 Set Suite Variable ${olt_serial_number}
79 Set Suite Variable ${olt_ip}
80 Set Suite Variable ${olt_user}
81 Set Suite Variable ${olt_pass}
82 Set Suite Variable ${k8s_node_ip}
83 Set Suite Variable ${k8s_node_user}
84 Set Suite Variable ${k8s_node_pass}
85 @{container_list}= Create List adapter-open-olt adapter-open-onu voltha-api-server
86 ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent
87 Set Suite Variable ${container_list}
88 ${datetime}= Get Current Date
suraj gour7f6d5fe2019-11-29 10:56:35 +000089 Set Suite Variable ${datetime}
90
91WPA Reassociate
suraj gour7f6d5fe2019-11-29 10:56:35 +000092 [Documentation] Executes a particular wpa_cli reassociate, which performs force reassociation
Zack Williamsa8fe75a2020-01-10 14:25:27 -070093 [Arguments] ${iface} ${ip} ${user} ${pass}=${None}
94 ... ${container_type}=${None} ${container_name}=${None}
suraj gour7f6d5fe2019-11-29 10:56:35 +000095 #Below for loops are used instead of sleep time, to execute reassociate command and check status
Zack Williamsa8fe75a2020-01-10 14:25:27 -070096 FOR ${i} IN RANGE 70
97 ${output}= Login And Run Command On Remote System
98 ... wpa_cli -i ${iface} reassociate ${ip} ${user}
99 ... ${pass} ${container_type} ${container_name}
100 ${passed}= Run Keyword And Return Status Should Contain ${output} OK
101 Run Keyword If ${passed} Exit For Loop
102 END
103 FOR ${i} IN RANGE 70
104 ${output}= Login And Run Command On Remote System
105 ... wpa_cli status | grep SUCCESS ${ip} ${user}
106 ... ${pass} ${container_type} ${container_name}
107 ${passed}= Run Keyword And Return Status Should Contain ${output} SUCCESS
108 Run Keyword If ${passed} Exit For Loop
109 END
110
suraj gour7f6d5fe2019-11-29 10:56:35 +0000111Validate Authentication After Reassociate
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700112 [Arguments] ${auth_pass} ${iface} ${ip} ${user} ${pass}=${None}
113 ... ${container_type}=${None} ${container_name}=${None}
114 [Documentation]
115 ... Executes a particular reassociate request on the RG using wpa_cli.
116 ... auth_pass determines if authentication should pass
suraj gour7f6d5fe2019-11-29 10:56:35 +0000117 WPA Reassociate ${iface} ${ip} ${user} ${pass} ${container_type} ${container_name}
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700118 Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds ${timeout} 2s
119 ... Check Remote File Contents True /tmp/wpa.log authentication completed successfully
120 ... ${ip} ${user} ${pass} ${container_type} ${container_name}
suraj gour7f6d5fe2019-11-29 10:56:35 +0000121 Run Keyword If '${auth_pass}' == 'False' Sleep 20s
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700122 Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log
123 ... authentication completed successfully ${ip} ${user} ${pass}
124 ... ${container_type} ${container_name}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000125
126Send Dhclient Request To Release Assigned IP
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700127 [Arguments] ${iface} ${ip} ${user} ${path_dhcpleasefile} ${pass}=${None}
128 ... ${container_type}=${None} ${container_name}=${None}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000129 [Documentation] Executes a dhclient with option to release ip against a particular interface on the RG (src)
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700130 ${result}= Login And Run Command On Remote System
131 ... dhclient -nw -r ${iface} && rm ${path_dhcpleasefile}/dhclient.* ${ip} ${user}
suraj gourd5cfdbb2019-12-13 12:44:55 +0000132 ... ${pass} ${container_type} ${container_name}
133 Log ${result}
134 #Should Contain ${result} DHCPRELEASE
135 [Return] ${result}
suraj gour1ecfae92019-12-20 15:11:40 +0000136
137Check Remote File Contents For WPA Logs
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700138 [Arguments] ${file_should_exist} ${file} ${pattern} ${ip} ${user} ${pass}=${None}
139 ... ${container_type}=${None} ${container_name}=${None} ${prompt}=~$
suraj gour1ecfae92019-12-20 15:11:40 +0000140 [Documentation] Checks for particular pattern count in a file
Zack Williamsa8fe75a2020-01-10 14:25:27 -0700141 ${result}= Login And Run Command On Remote System
142 ... cat ${file} | grep '${pattern}' | wc -l ${ip} ${user} ${pass}
suraj gour1ecfae92019-12-20 15:11:40 +0000143 ... ${container_type} ${container_name} ${prompt}
144 [Return] ${result}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000145
146Perform Sanity Test
147 [Documentation] This keyword performs Sanity Test Procedure
148 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
149 ... This keyword can be used to call in any other tests where sanity check is required
150 ... and avoids duplication of code.
151 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
152 Set Global Variable ${of_id}
153 FOR ${I} IN RANGE 0 ${num_onus}
154 ${src}= Set Variable ${hosts.src[${I}]}
155 ${dst}= Set Variable ${hosts.dst[${I}]}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000156 ${onu_device_id}= Get Device ID From SN ${src['onu']}
157 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
158 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800159 # Check ONU port is Enabled in ONOS
160 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
161 ... Verify ONU Port Is Enabled ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
162 # Verify EAPOL flows are added for the ONU port
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000163 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
164 ... Verify Eapol Flows Added For ONU ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800165 # Verify ONU state in voltha
166 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
167 ... ENABLED ACTIVE REACHABLE
168 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
169 # Perform Authentication
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000170 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True
171 ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']}
172 ... ${src['container_type']} ${src['container_name']}
173 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
174 ... Verify ONU in AAA-Users ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
175 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2
176 ... Execute ONOS CLI Command ${k8s_node_ip} ${ONOS_SSH_PORT}
177 ... volt-add-subscriber-access ${of_id} ${onu_port}
178 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True
179 ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
180 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
181 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
182 ... ${dst['container_name']}
183 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
184 ... Validate Subscriber DHCP Allocation ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
185 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
186 Run Keyword and Ignore Error Collect Logs
187 END
188
189Setup
190 [Documentation] Pre-test Setup
191 #test for empty device list
192 Test Empty Device List
193 Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s Openolt is Up
194 ... ${olt_ip} ${olt_user} ${olt_pass}
195 Sleep 60s
196 #create/preprovision device
197 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
198 Set Suite Variable ${olt_device_id}
199 #validate olt states
200 Wait Until Keyword Succeeds ${timeout} 5s
201 ... Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${EMPTY} ${olt_device_id}
Suchitra Vemuria7e8ad22020-02-11 18:02:40 -0800202 Sleep 5s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000203 Enable Device ${olt_device_id}
204 Wait Until Keyword Succeeds ${timeout} 5s
205 ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
206 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
207 Set Suite Variable ${logical_id}
208
209Delete All Devices and Verify
210 [Documentation] Remove any devices from VOLTHA and ONOS
211 # Clear devices from VOLTHA
212 Disable Devices In Voltha Root=true
213 Wait Until Keyword Succeeds ${timeout} 2s Test Devices Disabled In Voltha Root=true
214 Delete Devices In Voltha Root=true
215 Wait Until Keyword Succeeds ${timeout} 2s Test Empty Device List
216 # Clear devices from ONOS
217 Remove All Devices From ONOS
218 ... http://karaf:karaf@${k8s_node_ip}:${ONOS_REST_PORT}
219
220Teardown
221 [Documentation] kills processes and cleans up interfaces on src+dst servers
222 Run Keyword If ${has_dataplane} Clean Up Linux
223 Run Keyword If ${external_libs} Run Keyword and Ignore Error
224 ... Log Kubernetes Containers Logs Since Time
225 ... ${datetime} ${container_list}
226
227Teardown Suite
228 [Documentation] Clean up device if desired
229 Run Keyword If ${teardown_device} Delete All Devices and Verify
230
231Delete Device and Verify
232 [Documentation] Disable -> Delete devices via voltctl and verify its removed
Suchitra Vemuri2fa9bba2020-01-22 17:38:48 -0800233 ${olt_device_id}= Get Device ID From SN ${olt_serial_number}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +0000234 ${rc} ${output}= Run and Return Rc and Output
235 ... ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
236 Should Be Equal As Integers ${rc} 0
237 Sleep 5s
238 Wait Until Keyword Succeeds ${timeout} 5s
239 ... Validate OLT Device DISABLED UNKNOWN REACHABLE ${olt_serial_number}
240 ${rc} ${output}= Run and Return Rc and Output
241 ... ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
242 Sleep 50s
243 Should Be Equal As Integers ${rc} 0
244 Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id}
245
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000246Repeat Sanity Test
247 [Documentation] This keyword performs Sanity Test Procedure
248 ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD
249 ... This keyword can be used to call in any other tests where sanity check is required
250 ... with wpa reassociation
251 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
252 Set Global Variable ${of_id}
253 FOR ${I} IN RANGE 0 ${num_onus}
254 ${src}= Set Variable ${hosts.src[${I}]}
255 ${dst}= Set Variable ${hosts.dst[${I}]}
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800256 ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
257 ... Get ONU Port in ONOS ${src['onu']} ${of_id}
258 # Check ONU port is Enabled in ONOD
259 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s
260 ... Verify ONU Port Is Enabled ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
261 # Verify EAPOL flows are added for the ONU port
262 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
263 ... Verify Eapol Flows Added For ONU ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
264 # Verify ONU state in voltha
Suchitra Vemurid1e27fb2020-02-01 16:34:37 -0800265 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
Suchitra Vemuri81e4f022020-02-01 13:16:02 -0800266 ... ENABLED ACTIVE REACHABLE
267 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
Suchitra Vemuri8078b972020-02-06 19:07:41 -0800268 # Perform Authentication
Gayathri.Selvan283a63c2020-01-23 04:09:18 +0000269 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
270 ... Validate Authentication After Reassociate
271 ... True ${src['dp_iface_name']} ${src['ip']} ${src['user']} ${src['pass']}
272 ... ${src['container_type']} ${src['container_name']}
273 Wait Until Keyword Succeeds ${timeout} 2s
274 ... Verify ONU in AAA-Users ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
275 Wait Until Keyword Succeeds ${timeout} 2s
276 ... Execute ONOS CLI Command ${k8s_node_ip} ${ONOS_SSH_PORT}
277 ... volt-add-subscriber-access ${of_id} ${onu_port}
278 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
279 ... Validate DHCP and Ping True True
280 ... ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']}
281 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
282 ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']}
283 ... ${dst['container_name']}
284 Wait Until Keyword Succeeds ${timeout} 2s Run Keyword And Continue On Failure
285 ... Validate Subscriber DHCP Allocation ${k8s_node_ip} ${ONOS_SSH_PORT} ${onu_port}
286 Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id}
287 Run Keyword and Ignore Error Collect Logs
288 END
Gayathri.Selvanb6a2b542020-01-24 07:24:23 +0000289
290Collect Logs
291 [Documentation] Collect Logs from voltha and onos cli for various commands
292 Run Keyword and Ignore Error Get Device List from Voltha
293 Run Keyword and Ignore Error Get Device Output from Voltha ${olt_device_id}
294 Run Keyword and Ignore Error Get Logical Device Output from Voltha ${logical_id}
295 Run Keyword If ${external_libs} Get ONOS Status ${k8s_node_ip}
Gayathri.Selvanf68ea4b2020-02-03 07:36:39 +0000296
297Verify ping is succesful except for given device
298 [Arguments] ${num_onus} ${exceptional_onu_id}
299 [Documentation] Checks that ping for all the devices are successful except the given ONU.
300 ${pingStatus} Set Variable True
301 FOR ${I} IN RANGE 0 ${num_onus}
302 ${src}= Set Variable ${hosts.src[${I}]}
303 ${dst}= Set Variable ${hosts.dst[${I}]}
304 ${onu_device_id}= Get Device ID From SN ${src['onu']}
305 ${pingStatus} Run Keyword If '${onu_device_id}' == '${exceptional_onu_id}' Set Variable False
306 Run Keyword And Continue On Failure Wait Until Keyword Succeeds 60s 2s
307 ... Check Ping ${pingStatus} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
308 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
309 END
Andy Bavier4a8450e2020-02-04 08:58:37 -0700310
311Announce Message
312 [Arguments] ${message}
313 [Documentation] Announce a message that will be picked up by the log aggregator
Andy Bavier1af971b2020-02-05 14:26:21 -0700314 Run Process kubectl run announcer -ti --rm --restart Never --image ubuntu
Andy Bavier4a8450e2020-02-04 08:58:37 -0700315 ... bash -- -c echo; sleep 1; echo ${message}; sleep 1; date --rfc-3339\=n ; sleep 1; echo; sleep 1
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -0800316
Andy Bavierabeba262020-02-07 16:22:16 -0700317Start Logging
318 [Arguments] ${label}
319 [Documentation] Start logging for test ${label}
320 ${kail_process}= Run Keyword If "${container_log_dir}" != "${None}" Start Process kail -n default
321 ... -n voltha cwd=${container_log_dir} stdout=${label}-combined.log
322 Set Test Variable ${kail_process}
323
324Stop Logging
325 [Arguments] ${label}
326 [Documentation] End logging for test; remove logfile if test passed
327 Run sync
328 Run Keyword If ${kail_process} Terminate Process ${kail_process}
329 ${test_logfile}= Run Keyword If "${container_log_dir}" != "${None}"
330 ... Join Path ${container_log_dir} ${label}-combined.log
331 Run Keyword If Test Passed Run Keyword If "${test_logfile}" != "${None}" Remove File ${test_logfile}
332
Suchitra Vemuria5fa3dd2020-02-04 14:38:49 -0800333Clean Up Linux
334 [Documentation] Kill processes and clean up interfaces on src+dst servers
335 FOR ${I} IN RANGE 0 ${num_onus}
336 ${src}= Set Variable ${hosts.src[${I}]}
337 ${dst}= Set Variable ${hosts.dst[${I}]}
338 Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']}
339 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
340 Run Keyword And Ignore Error Kill Linux Process [d]hclient ${src['ip']}
341 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
342 Run Keyword If '${dst['ip']}' != '${None}' Run Keyword And Ignore Error
343 ... Kill Linux Process [d]hcpd ${dst['ip']} ${dst['user']}
344 ... ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
345 Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
346 ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
347 Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
348 ... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
349 ... ${dst['container_type']} ${dst['container_name']}
350 END
Scott Baker60e570d2020-02-02 22:10:13 -0800351
352Should Be Larger Than
353 [Documentation] Verify that value_1 is > value_2
354 [Arguments] ${value_1} ${value_2}
355 Run Keyword If ${value_1} <= ${value_2}
356 ... Fail The value ${value_1} is not larger than ${value_2}
357
358Should Be Float
359 [Documentation] Verify that value is a floating point number type
360 [Arguments] ${value}
361 ${type} Evaluate type(${value}).__name__
362 Should Be Equal ${type} float
363
364Get Current Time
365 [Documentation] Return the current time in RFC3339 format
366 ${output}= Run date -u +"%FT%T%:z"
367 [return] ${output}