Gitiles
Code Review Sign In
gerrit.opencord.org / voltha / 1d1f057359bb796aa2aa8833e1d62c0340df17cb
commit1d1f057359bb796aa2aa8833e1d62c0340df17cb[log] [tgz]
authorCraig Lutgen <craig.lutgen@tellabs.com>Fri Nov 02 04:12:13 2018 +0000
committerCraig Lutgen <craig.lutgen@tellabs.com>Fri Nov 02 14:57:08 2018 +0000
tree6b3c19da15e00c5e6c7f95f85fd08ceb307ed70b
parent0813de8303f21c1280be617fcac9aa6b2e10eeee [diff]
VOL-1311 - OpenOMCI read failure when "get" action on ME table attribute

Temporary work around in brcm_openomci_onu adapter to avoid get of
table attribute in ExtendedVlanTaggingConfigurationData ME that occurs
implicitly after create if the VlanTaggingTable attribute was not
set during creation. This is causing exception on some ONUs during
MIB download.

Workaround is to make sure to set the VlanTaggingTable attribute
during the create operation rather than as a subsequent set operation.

Change-Id: I44a9151bdbdb2febb5b12f97ae7cd395eccdb74e
1 file changed
tree: 6b3c19da15e00c5e6c7f95f85fd08ceb307ed70b
  1. .dockerignore
  2. .gitignore
  3. .gitreview
  4. BUILD.md
  5. BuildingVolthaUsingVagrantOnKVM.md
  6. DOCKER_BUILD.md
  7. GettingStartedLinux.md
  8. Jenkinsfile
  9. LICENSE.txt
  10. Makefile
  11. README.md
  12. TODO.md
  13. Vagrantfile
  14. alarm-generator/
  15. ansible/
  16. cli/
  17. common/
  18. compose/
  19. consul_config/
  20. dashd/
  21. docker/
  22. docs/
  23. env.sh
  24. envoy/
  25. experiments/
  26. fluentd_config/
  27. install/
  28. k8s/
  29. kafka/
  30. netconf/
  31. netopeer/
  32. nginx_config/
  33. obsolete/
  34. ofagent/
  35. pki/
  36. ponsim/
  37. portainer/
  38. reg_config/
  39. requirements.txt
  40. scripts/
  41. settings.vagrant.nightly-docker.yaml
  42. settings.vagrant.nightly.yaml
  43. settings.vagrant.yaml
  44. setup.mk
  45. setup.py
  46. shovel/
  47. tests/
  48. tmp_integration.md
  49. unum/
  50. vagrant-base/
  51. voltha/
README.md

VOLTHA

What is Voltha?

Voltha aims to provide a layer of abstraction on top of legacy and next generation access network equipment for the purpose of control and management. Its initial focus is on PON (GPON, EPON, NG PON 2), but it aims to go beyond to eventually cover other access technologies (xDSL, Docsis, G.FAST, dedicated Ethernet, fixed wireless).

Key concepts of Voltha:

  • Network as a Switch: It makes a set of connected access network devices to look like a(n abstract) programmable flow device, a L2/L3/L4 switch. Examples:
    • PON as a Switch
    • PON + access backhaul as a Switch
    • xDSL service as a Switch
  • Evolution to virtualization: it can work with a variety of (access) network technologies and devices, including legacy, fully virtualized (in the sense of separation of hardware and software), and in between. Voltha can run on a decice, on general purpose servers in the central office, or in data centers.
  • Unified OAM abstraction: it provides unified, vendor- and technology agnostic handling of device management tasks, such as service lifecycle, device lifecycle (including discovery, upgrade), system monitoring, alarms, troubleshooting, security, etc.
  • Cloud/DevOps bridge to modernization: it does all above while also treating the abstracted network functions as software services manageable much like other software components in the cloud, i.e., containers.

Why Voltha?

Control and management in the access network space is a mess. Each access technology brings its own bag of protocols, and on top of that vendors have their own interpretation/extension of the same standards. Compounding the problem is that these vendor- and technology specific differences ooze way up into the centralized OSS systems of the service provider, creating a lot of inefficiencies.

Ideally, all vendor equipment for the same access technology should provide an identical interface for control and management. Moreover, there shall be much higher synergies across technologies. While we wait for vendors to unite, Voltha provides an increment to that direction, by confining the differences to the locality of access and hiding them from the upper layers of the OSS stack.

How can you work with Voltha?

While we are still at the early phase of development, you can check out the BUILD.md file to see how you can build it, run it, test it, etc.

How can you help?

Contributions, small and large, are welcome. Minor contributions and bug fixes are always welcome in form of pull requests. For larger work, the best is to check in with the existing developers to see where help is most needed and to make sure your solution is compatible with the general philosophy of Voltha.