VOL-381 add unum container to support ONOS cluster formation under swarm
Change-Id: Ic260edda19bb199ed040f05164ab605f28c919d0
diff --git a/unum/vendor/github.com/gorilla/mux/LICENSE b/unum/vendor/github.com/gorilla/mux/LICENSE
new file mode 100644
index 0000000..0e5fb87
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2012 Rodrigo Moraes. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+ * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+ * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/unum/vendor/github.com/gorilla/mux/README.md b/unum/vendor/github.com/gorilla/mux/README.md
new file mode 100644
index 0000000..8595397
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/README.md
@@ -0,0 +1,383 @@
+gorilla/mux
+===
+[](https://godoc.org/github.com/gorilla/mux)
+[](https://travis-ci.org/gorilla/mux)
+[](https://sourcegraph.com/github.com/gorilla/mux?badge)
+
+
+
+http://www.gorillatoolkit.org/pkg/mux
+
+Package `gorilla/mux` implements a request router and dispatcher for matching incoming requests to
+their respective handler.
+
+The name mux stands for "HTTP request multiplexer". Like the standard `http.ServeMux`, `mux.Router` matches incoming requests against a list of registered routes and calls a handler for the route that matches the URL or other conditions. The main features are:
+
+* It implements the `http.Handler` interface so it is compatible with the standard `http.ServeMux`.
+* Requests can be matched based on URL host, path, path prefix, schemes, header and query values, HTTP methods or using custom matchers.
+* URL hosts, paths and query values can have variables with an optional regular expression.
+* Registered URLs can be built, or "reversed", which helps maintaining references to resources.
+* Routes can be used as subrouters: nested routes are only tested if the parent route matches. This is useful to define groups of routes that share common conditions like a host, a path prefix or other repeated attributes. As a bonus, this optimizes request matching.
+
+---
+
+* [Install](#install)
+* [Examples](#examples)
+* [Matching Routes](#matching-routes)
+* [Static Files](#static-files)
+* [Registered URLs](#registered-urls)
+* [Walking Routes](#walking-routes)
+* [Full Example](#full-example)
+
+---
+
+## Install
+
+With a [correctly configured](https://golang.org/doc/install#testing) Go toolchain:
+
+```sh
+go get -u github.com/gorilla/mux
+```
+
+## Examples
+
+Let's start registering a couple of URL paths and handlers:
+
+```go
+func main() {
+ r := mux.NewRouter()
+ r.HandleFunc("/", HomeHandler)
+ r.HandleFunc("/products", ProductsHandler)
+ r.HandleFunc("/articles", ArticlesHandler)
+ http.Handle("/", r)
+}
+```
+
+Here we register three routes mapping URL paths to handlers. This is equivalent to how `http.HandleFunc()` works: if an incoming request URL matches one of the paths, the corresponding handler is called passing (`http.ResponseWriter`, `*http.Request`) as parameters.
+
+Paths can have variables. They are defined using the format `{name}` or `{name:pattern}`. If a regular expression pattern is not defined, the matched variable will be anything until the next slash. For example:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/products/{key}", ProductHandler)
+r.HandleFunc("/articles/{category}/", ArticlesCategoryHandler)
+r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+```
+
+The names are used to create a map of route variables which can be retrieved calling `mux.Vars()`:
+
+```go
+func ArticlesCategoryHandler(w http.ResponseWriter, r *http.Request) {
+ vars := mux.Vars(r)
+ w.WriteHeader(http.StatusOK)
+ fmt.Fprintf(w, "Category: %v\n", vars["category"])
+}
+```
+
+And this is all you need to know about the basic usage. More advanced options are explained below.
+
+### Matching Routes
+
+Routes can also be restricted to a domain or subdomain. Just define a host pattern to be matched. They can also have variables:
+
+```go
+r := mux.NewRouter()
+// Only matches if domain is "www.example.com".
+r.Host("www.example.com")
+// Matches a dynamic subdomain.
+r.Host("{subdomain:[a-z]+}.domain.com")
+```
+
+There are several other matchers that can be added. To match path prefixes:
+
+```go
+r.PathPrefix("/products/")
+```
+
+...or HTTP methods:
+
+```go
+r.Methods("GET", "POST")
+```
+
+...or URL schemes:
+
+```go
+r.Schemes("https")
+```
+
+...or header values:
+
+```go
+r.Headers("X-Requested-With", "XMLHttpRequest")
+```
+
+...or query values:
+
+```go
+r.Queries("key", "value")
+```
+
+...or to use a custom matcher function:
+
+```go
+r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
+ return r.ProtoMajor == 0
+})
+```
+
+...and finally, it is possible to combine several matchers in a single route:
+
+```go
+r.HandleFunc("/products", ProductsHandler).
+ Host("www.example.com").
+ Methods("GET").
+ Schemes("http")
+```
+
+Setting the same matching conditions again and again can be boring, so we have a way to group several routes that share the same requirements. We call it "subrouting".
+
+For example, let's say we have several URLs that should only match when the host is `www.example.com`. Create a route for that host and get a "subrouter" from it:
+
+```go
+r := mux.NewRouter()
+s := r.Host("www.example.com").Subrouter()
+```
+
+Then register routes in the subrouter:
+
+```go
+s.HandleFunc("/products/", ProductsHandler)
+s.HandleFunc("/products/{key}", ProductHandler)
+s.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+```
+
+The three URL paths we registered above will only be tested if the domain is `www.example.com`, because the subrouter is tested first. This is not only convenient, but also optimizes request matching. You can create subrouters combining any attribute matchers accepted by a route.
+
+Subrouters can be used to create domain or path "namespaces": you define subrouters in a central place and then parts of the app can register its paths relatively to a given subrouter.
+
+There's one more thing about subroutes. When a subrouter has a path prefix, the inner routes use it as base for their paths:
+
+```go
+r := mux.NewRouter()
+s := r.PathPrefix("/products").Subrouter()
+// "/products/"
+s.HandleFunc("/", ProductsHandler)
+// "/products/{key}/"
+s.HandleFunc("/{key}/", ProductHandler)
+// "/products/{key}/details"
+s.HandleFunc("/{key}/details", ProductDetailsHandler)
+```
+### Listing Routes
+
+Routes on a mux can be listed using the Router.Walk method—useful for generating documentation:
+
+```go
+package main
+
+import (
+ "fmt"
+ "net/http"
+ "strings"
+
+ "github.com/gorilla/mux"
+)
+
+func handler(w http.ResponseWriter, r *http.Request) {
+ return
+}
+
+func main() {
+ r := mux.NewRouter()
+ r.HandleFunc("/", handler)
+ r.HandleFunc("/products", handler).Methods("POST")
+ r.HandleFunc("/articles", handler).Methods("GET")
+ r.HandleFunc("/articles/{id}", handler).Methods("GET", "PUT")
+ r.Walk(func(route *mux.Route, router *mux.Router, ancestors []*mux.Route) error {
+ t, err := route.GetPathTemplate()
+ if err != nil {
+ return err
+ }
+ // p will contain regular expression is compatible with regular expression in Perl, Python, and other languages.
+ // for instance the regular expression for path '/articles/{id}' will be '^/articles/(?P<v0>[^/]+)$'
+ p, err := route.GetPathRegexp()
+ if err != nil {
+ return err
+ }
+ m, err := route.GetMethods()
+ if err != nil {
+ return err
+ }
+ fmt.Println(strings.Join(m, ","), t, p)
+ return nil
+ })
+ http.Handle("/", r)
+}
+```
+
+### Static Files
+
+Note that the path provided to `PathPrefix()` represents a "wildcard": calling
+`PathPrefix("/static/").Handler(...)` means that the handler will be passed any
+request that matches "/static/*". This makes it easy to serve static files with mux:
+
+```go
+func main() {
+ var dir string
+
+ flag.StringVar(&dir, "dir", ".", "the directory to serve files from. Defaults to the current dir")
+ flag.Parse()
+ r := mux.NewRouter()
+
+ // This will serve files under http://localhost:8000/static/<filename>
+ r.PathPrefix("/static/").Handler(http.StripPrefix("/static/", http.FileServer(http.Dir(dir))))
+
+ srv := &http.Server{
+ Handler: r,
+ Addr: "127.0.0.1:8000",
+ // Good practice: enforce timeouts for servers you create!
+ WriteTimeout: 15 * time.Second,
+ ReadTimeout: 15 * time.Second,
+ }
+
+ log.Fatal(srv.ListenAndServe())
+}
+```
+
+### Registered URLs
+
+Now let's see how to build registered URLs.
+
+Routes can be named. All routes that define a name can have their URLs built, or "reversed". We define a name calling `Name()` on a route. For example:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+ Name("article")
+```
+
+To build a URL, get the route and call the `URL()` method, passing a sequence of key/value pairs for the route variables. For the previous route, we would do:
+
+```go
+url, err := r.Get("article").URL("category", "technology", "id", "42")
+```
+
+...and the result will be a `url.URL` with the following path:
+
+```
+"/articles/technology/42"
+```
+
+This also works for host and query value variables:
+
+```go
+r := mux.NewRouter()
+r.Host("{subdomain}.domain.com").
+ Path("/articles/{category}/{id:[0-9]+}").
+ Queries("filter", "{filter}")
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+// url.String() will be "http://news.domain.com/articles/technology/42?filter=gorilla"
+url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42",
+ "filter", "gorilla")
+```
+
+All variables defined in the route are required, and their values must conform to the corresponding patterns. These requirements guarantee that a generated URL will always match a registered route -- the only exception is for explicitly defined "build-only" routes which never match.
+
+Regex support also exists for matching Headers within a route. For example, we could do:
+
+```go
+r.HeadersRegexp("Content-Type", "application/(text|json)")
+```
+
+...and the route will match both requests with a Content-Type of `application/json` as well as `application/text`
+
+There's also a way to build only the URL host or path for a route: use the methods `URLHost()` or `URLPath()` instead. For the previous route, we would do:
+
+```go
+// "http://news.domain.com/"
+host, err := r.Get("article").URLHost("subdomain", "news")
+
+// "/articles/technology/42"
+path, err := r.Get("article").URLPath("category", "technology", "id", "42")
+```
+
+And if you use subrouters, host and path defined separately can be built as well:
+
+```go
+r := mux.NewRouter()
+s := r.Host("{subdomain}.domain.com").Subrouter()
+s.Path("/articles/{category}/{id:[0-9]+}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+// "http://news.domain.com/articles/technology/42"
+url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42")
+```
+
+### Walking Routes
+
+The `Walk` function on `mux.Router` can be used to visit all of the routes that are registered on a router. For example,
+the following prints all of the registered routes:
+
+```go
+r := mux.NewRouter()
+r.HandleFunc("/", handler)
+r.HandleFunc("/products", handler).Methods("POST")
+r.HandleFunc("/articles", handler).Methods("GET")
+r.HandleFunc("/articles/{id}", handler).Methods("GET", "PUT")
+r.Walk(func(route *mux.Route, router *mux.Router, ancestors []*mux.Route) error {
+ t, err := route.GetPathTemplate()
+ if err != nil {
+ return err
+ }
+ // p will contain a regular expression that is compatible with regular expressions in Perl, Python, and other languages.
+ // For example, the regular expression for path '/articles/{id}' will be '^/articles/(?P<v0>[^/]+)$'.
+ p, err := route.GetPathRegexp()
+ if err != nil {
+ return err
+ }
+ m, err := route.GetMethods()
+ if err != nil {
+ return err
+ }
+ fmt.Println(strings.Join(m, ","), t, p)
+ return nil
+})
+```
+
+## Full Example
+
+Here's a complete, runnable example of a small `mux` based server:
+
+```go
+package main
+
+import (
+ "net/http"
+ "log"
+ "github.com/gorilla/mux"
+)
+
+func YourHandler(w http.ResponseWriter, r *http.Request) {
+ w.Write([]byte("Gorilla!\n"))
+}
+
+func main() {
+ r := mux.NewRouter()
+ // Routes consist of a path and a handler function.
+ r.HandleFunc("/", YourHandler)
+
+ // Bind to a port and pass our router in
+ log.Fatal(http.ListenAndServe(":8000", r))
+}
+```
+
+## License
+
+BSD licensed. See the LICENSE file for details.
diff --git a/unum/vendor/github.com/gorilla/mux/context_gorilla.go b/unum/vendor/github.com/gorilla/mux/context_gorilla.go
new file mode 100644
index 0000000..d7adaa8
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/context_gorilla.go
@@ -0,0 +1,26 @@
+// +build !go1.7
+
+package mux
+
+import (
+ "net/http"
+
+ "github.com/gorilla/context"
+)
+
+func contextGet(r *http.Request, key interface{}) interface{} {
+ return context.Get(r, key)
+}
+
+func contextSet(r *http.Request, key, val interface{}) *http.Request {
+ if val == nil {
+ return r
+ }
+
+ context.Set(r, key, val)
+ return r
+}
+
+func contextClear(r *http.Request) {
+ context.Clear(r)
+}
diff --git a/unum/vendor/github.com/gorilla/mux/context_native.go b/unum/vendor/github.com/gorilla/mux/context_native.go
new file mode 100644
index 0000000..209cbea
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/context_native.go
@@ -0,0 +1,24 @@
+// +build go1.7
+
+package mux
+
+import (
+ "context"
+ "net/http"
+)
+
+func contextGet(r *http.Request, key interface{}) interface{} {
+ return r.Context().Value(key)
+}
+
+func contextSet(r *http.Request, key, val interface{}) *http.Request {
+ if val == nil {
+ return r
+ }
+
+ return r.WithContext(context.WithValue(r.Context(), key, val))
+}
+
+func contextClear(r *http.Request) {
+ return
+}
diff --git a/unum/vendor/github.com/gorilla/mux/doc.go b/unum/vendor/github.com/gorilla/mux/doc.go
new file mode 100644
index 0000000..cce30b2
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/doc.go
@@ -0,0 +1,242 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package mux implements a request router and dispatcher.
+
+The name mux stands for "HTTP request multiplexer". Like the standard
+http.ServeMux, mux.Router matches incoming requests against a list of
+registered routes and calls a handler for the route that matches the URL
+or other conditions. The main features are:
+
+ * Requests can be matched based on URL host, path, path prefix, schemes,
+ header and query values, HTTP methods or using custom matchers.
+ * URL hosts, paths and query values can have variables with an optional
+ regular expression.
+ * Registered URLs can be built, or "reversed", which helps maintaining
+ references to resources.
+ * Routes can be used as subrouters: nested routes are only tested if the
+ parent route matches. This is useful to define groups of routes that
+ share common conditions like a host, a path prefix or other repeated
+ attributes. As a bonus, this optimizes request matching.
+ * It implements the http.Handler interface so it is compatible with the
+ standard http.ServeMux.
+
+Let's start registering a couple of URL paths and handlers:
+
+ func main() {
+ r := mux.NewRouter()
+ r.HandleFunc("/", HomeHandler)
+ r.HandleFunc("/products", ProductsHandler)
+ r.HandleFunc("/articles", ArticlesHandler)
+ http.Handle("/", r)
+ }
+
+Here we register three routes mapping URL paths to handlers. This is
+equivalent to how http.HandleFunc() works: if an incoming request URL matches
+one of the paths, the corresponding handler is called passing
+(http.ResponseWriter, *http.Request) as parameters.
+
+Paths can have variables. They are defined using the format {name} or
+{name:pattern}. If a regular expression pattern is not defined, the matched
+variable will be anything until the next slash. For example:
+
+ r := mux.NewRouter()
+ r.HandleFunc("/products/{key}", ProductHandler)
+ r.HandleFunc("/articles/{category}/", ArticlesCategoryHandler)
+ r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler)
+
+Groups can be used inside patterns, as long as they are non-capturing (?:re). For example:
+
+ r.HandleFunc("/articles/{category}/{sort:(?:asc|desc|new)}", ArticlesCategoryHandler)
+
+The names are used to create a map of route variables which can be retrieved
+calling mux.Vars():
+
+ vars := mux.Vars(request)
+ category := vars["category"]
+
+Note that if any capturing groups are present, mux will panic() during parsing. To prevent
+this, convert any capturing groups to non-capturing, e.g. change "/{sort:(asc|desc)}" to
+"/{sort:(?:asc|desc)}". This is a change from prior versions which behaved unpredictably
+when capturing groups were present.
+
+And this is all you need to know about the basic usage. More advanced options
+are explained below.
+
+Routes can also be restricted to a domain or subdomain. Just define a host
+pattern to be matched. They can also have variables:
+
+ r := mux.NewRouter()
+ // Only matches if domain is "www.example.com".
+ r.Host("www.example.com")
+ // Matches a dynamic subdomain.
+ r.Host("{subdomain:[a-z]+}.domain.com")
+
+There are several other matchers that can be added. To match path prefixes:
+
+ r.PathPrefix("/products/")
+
+...or HTTP methods:
+
+ r.Methods("GET", "POST")
+
+...or URL schemes:
+
+ r.Schemes("https")
+
+...or header values:
+
+ r.Headers("X-Requested-With", "XMLHttpRequest")
+
+...or query values:
+
+ r.Queries("key", "value")
+
+...or to use a custom matcher function:
+
+ r.MatcherFunc(func(r *http.Request, rm *RouteMatch) bool {
+ return r.ProtoMajor == 0
+ })
+
+...and finally, it is possible to combine several matchers in a single route:
+
+ r.HandleFunc("/products", ProductsHandler).
+ Host("www.example.com").
+ Methods("GET").
+ Schemes("http")
+
+Setting the same matching conditions again and again can be boring, so we have
+a way to group several routes that share the same requirements.
+We call it "subrouting".
+
+For example, let's say we have several URLs that should only match when the
+host is "www.example.com". Create a route for that host and get a "subrouter"
+from it:
+
+ r := mux.NewRouter()
+ s := r.Host("www.example.com").Subrouter()
+
+Then register routes in the subrouter:
+
+ s.HandleFunc("/products/", ProductsHandler)
+ s.HandleFunc("/products/{key}", ProductHandler)
+ s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+
+The three URL paths we registered above will only be tested if the domain is
+"www.example.com", because the subrouter is tested first. This is not
+only convenient, but also optimizes request matching. You can create
+subrouters combining any attribute matchers accepted by a route.
+
+Subrouters can be used to create domain or path "namespaces": you define
+subrouters in a central place and then parts of the app can register its
+paths relatively to a given subrouter.
+
+There's one more thing about subroutes. When a subrouter has a path prefix,
+the inner routes use it as base for their paths:
+
+ r := mux.NewRouter()
+ s := r.PathPrefix("/products").Subrouter()
+ // "/products/"
+ s.HandleFunc("/", ProductsHandler)
+ // "/products/{key}/"
+ s.HandleFunc("/{key}/", ProductHandler)
+ // "/products/{key}/details"
+ s.HandleFunc("/{key}/details", ProductDetailsHandler)
+
+Note that the path provided to PathPrefix() represents a "wildcard": calling
+PathPrefix("/static/").Handler(...) means that the handler will be passed any
+request that matches "/static/*". This makes it easy to serve static files with mux:
+
+ func main() {
+ var dir string
+
+ flag.StringVar(&dir, "dir", ".", "the directory to serve files from. Defaults to the current dir")
+ flag.Parse()
+ r := mux.NewRouter()
+
+ // This will serve files under http://localhost:8000/static/<filename>
+ r.PathPrefix("/static/").Handler(http.StripPrefix("/static/", http.FileServer(http.Dir(dir))))
+
+ srv := &http.Server{
+ Handler: r,
+ Addr: "127.0.0.1:8000",
+ // Good practice: enforce timeouts for servers you create!
+ WriteTimeout: 15 * time.Second,
+ ReadTimeout: 15 * time.Second,
+ }
+
+ log.Fatal(srv.ListenAndServe())
+ }
+
+Now let's see how to build registered URLs.
+
+Routes can be named. All routes that define a name can have their URLs built,
+or "reversed". We define a name calling Name() on a route. For example:
+
+ r := mux.NewRouter()
+ r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+ Name("article")
+
+To build a URL, get the route and call the URL() method, passing a sequence of
+key/value pairs for the route variables. For the previous route, we would do:
+
+ url, err := r.Get("article").URL("category", "technology", "id", "42")
+
+...and the result will be a url.URL with the following path:
+
+ "/articles/technology/42"
+
+This also works for host and query value variables:
+
+ r := mux.NewRouter()
+ r.Host("{subdomain}.domain.com").
+ Path("/articles/{category}/{id:[0-9]+}").
+ Queries("filter", "{filter}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+ // url.String() will be "http://news.domain.com/articles/technology/42?filter=gorilla"
+ url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42",
+ "filter", "gorilla")
+
+All variables defined in the route are required, and their values must
+conform to the corresponding patterns. These requirements guarantee that a
+generated URL will always match a registered route -- the only exception is
+for explicitly defined "build-only" routes which never match.
+
+Regex support also exists for matching Headers within a route. For example, we could do:
+
+ r.HeadersRegexp("Content-Type", "application/(text|json)")
+
+...and the route will match both requests with a Content-Type of `application/json` as well as
+`application/text`
+
+There's also a way to build only the URL host or path for a route:
+use the methods URLHost() or URLPath() instead. For the previous route,
+we would do:
+
+ // "http://news.domain.com/"
+ host, err := r.Get("article").URLHost("subdomain", "news")
+
+ // "/articles/technology/42"
+ path, err := r.Get("article").URLPath("category", "technology", "id", "42")
+
+And if you use subrouters, host and path defined separately can be built
+as well:
+
+ r := mux.NewRouter()
+ s := r.Host("{subdomain}.domain.com").Subrouter()
+ s.Path("/articles/{category}/{id:[0-9]+}").
+ HandlerFunc(ArticleHandler).
+ Name("article")
+
+ // "http://news.domain.com/articles/technology/42"
+ url, err := r.Get("article").URL("subdomain", "news",
+ "category", "technology",
+ "id", "42")
+*/
+package mux
diff --git a/unum/vendor/github.com/gorilla/mux/mux.go b/unum/vendor/github.com/gorilla/mux/mux.go
new file mode 100644
index 0000000..fb69196
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/mux.go
@@ -0,0 +1,580 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+ "errors"
+ "fmt"
+ "net/http"
+ "path"
+ "regexp"
+ "strings"
+)
+
+var (
+ ErrMethodMismatch = errors.New("method is not allowed")
+)
+
+// NewRouter returns a new router instance.
+func NewRouter() *Router {
+ return &Router{namedRoutes: make(map[string]*Route), KeepContext: false}
+}
+
+// Router registers routes to be matched and dispatches a handler.
+//
+// It implements the http.Handler interface, so it can be registered to serve
+// requests:
+//
+// var router = mux.NewRouter()
+//
+// func main() {
+// http.Handle("/", router)
+// }
+//
+// Or, for Google App Engine, register it in a init() function:
+//
+// func init() {
+// http.Handle("/", router)
+// }
+//
+// This will send all incoming requests to the router.
+type Router struct {
+ // Configurable Handler to be used when no route matches.
+ NotFoundHandler http.Handler
+
+ // Configurable Handler to be used when the request method does not match the route.
+ MethodNotAllowedHandler http.Handler
+
+ // Parent route, if this is a subrouter.
+ parent parentRoute
+ // Routes to be matched, in order.
+ routes []*Route
+ // Routes by name for URL building.
+ namedRoutes map[string]*Route
+ // See Router.StrictSlash(). This defines the flag for new routes.
+ strictSlash bool
+ // See Router.SkipClean(). This defines the flag for new routes.
+ skipClean bool
+ // If true, do not clear the request context after handling the request.
+ // This has no effect when go1.7+ is used, since the context is stored
+ // on the request itself.
+ KeepContext bool
+ // see Router.UseEncodedPath(). This defines a flag for all routes.
+ useEncodedPath bool
+}
+
+// Match matches registered routes against the request.
+func (r *Router) Match(req *http.Request, match *RouteMatch) bool {
+ for _, route := range r.routes {
+ if route.Match(req, match) {
+ return true
+ }
+ }
+
+ if match.MatchErr == ErrMethodMismatch && r.MethodNotAllowedHandler != nil {
+ match.Handler = r.MethodNotAllowedHandler
+ return true
+ }
+
+ // Closest match for a router (includes sub-routers)
+ if r.NotFoundHandler != nil {
+ match.Handler = r.NotFoundHandler
+ return true
+ }
+ return false
+}
+
+// ServeHTTP dispatches the handler registered in the matched route.
+//
+// When there is a match, the route variables can be retrieved calling
+// mux.Vars(request).
+func (r *Router) ServeHTTP(w http.ResponseWriter, req *http.Request) {
+ if !r.skipClean {
+ path := req.URL.Path
+ if r.useEncodedPath {
+ path = getPath(req)
+ }
+ // Clean path to canonical form and redirect.
+ if p := cleanPath(path); p != path {
+
+ // Added 3 lines (Philip Schlump) - It was dropping the query string and #whatever from query.
+ // This matches with fix in go 1.2 r.c. 4 for same problem. Go Issue:
+ // http://code.google.com/p/go/issues/detail?id=5252
+ url := *req.URL
+ url.Path = p
+ p = url.String()
+
+ w.Header().Set("Location", p)
+ w.WriteHeader(http.StatusMovedPermanently)
+ return
+ }
+ }
+ var match RouteMatch
+ var handler http.Handler
+ if r.Match(req, &match) {
+ handler = match.Handler
+ req = setVars(req, match.Vars)
+ req = setCurrentRoute(req, match.Route)
+ }
+
+ if handler == nil && match.MatchErr == ErrMethodMismatch {
+ handler = methodNotAllowedHandler()
+ }
+
+ if handler == nil {
+ handler = http.NotFoundHandler()
+ }
+
+ if !r.KeepContext {
+ defer contextClear(req)
+ }
+ handler.ServeHTTP(w, req)
+}
+
+// Get returns a route registered with the given name.
+func (r *Router) Get(name string) *Route {
+ return r.getNamedRoutes()[name]
+}
+
+// GetRoute returns a route registered with the given name. This method
+// was renamed to Get() and remains here for backwards compatibility.
+func (r *Router) GetRoute(name string) *Route {
+ return r.getNamedRoutes()[name]
+}
+
+// StrictSlash defines the trailing slash behavior for new routes. The initial
+// value is false.
+//
+// When true, if the route path is "/path/", accessing "/path" will redirect
+// to the former and vice versa. In other words, your application will always
+// see the path as specified in the route.
+//
+// When false, if the route path is "/path", accessing "/path/" will not match
+// this route and vice versa.
+//
+// Special case: when a route sets a path prefix using the PathPrefix() method,
+// strict slash is ignored for that route because the redirect behavior can't
+// be determined from a prefix alone. However, any subrouters created from that
+// route inherit the original StrictSlash setting.
+func (r *Router) StrictSlash(value bool) *Router {
+ r.strictSlash = value
+ return r
+}
+
+// SkipClean defines the path cleaning behaviour for new routes. The initial
+// value is false. Users should be careful about which routes are not cleaned
+//
+// When true, if the route path is "/path//to", it will remain with the double
+// slash. This is helpful if you have a route like: /fetch/http://xkcd.com/534/
+//
+// When false, the path will be cleaned, so /fetch/http://xkcd.com/534/ will
+// become /fetch/http/xkcd.com/534
+func (r *Router) SkipClean(value bool) *Router {
+ r.skipClean = value
+ return r
+}
+
+// UseEncodedPath tells the router to match the encoded original path
+// to the routes.
+// For eg. "/path/foo%2Fbar/to" will match the path "/path/{var}/to".
+// This behavior has the drawback of needing to match routes against
+// r.RequestURI instead of r.URL.Path. Any modifications (such as http.StripPrefix)
+// to r.URL.Path will not affect routing when this flag is on and thus may
+// induce unintended behavior.
+//
+// If not called, the router will match the unencoded path to the routes.
+// For eg. "/path/foo%2Fbar/to" will match the path "/path/foo/bar/to"
+func (r *Router) UseEncodedPath() *Router {
+ r.useEncodedPath = true
+ return r
+}
+
+// ----------------------------------------------------------------------------
+// parentRoute
+// ----------------------------------------------------------------------------
+
+func (r *Router) getBuildScheme() string {
+ if r.parent != nil {
+ return r.parent.getBuildScheme()
+ }
+ return ""
+}
+
+// getNamedRoutes returns the map where named routes are registered.
+func (r *Router) getNamedRoutes() map[string]*Route {
+ if r.namedRoutes == nil {
+ if r.parent != nil {
+ r.namedRoutes = r.parent.getNamedRoutes()
+ } else {
+ r.namedRoutes = make(map[string]*Route)
+ }
+ }
+ return r.namedRoutes
+}
+
+// getRegexpGroup returns regexp definitions from the parent route, if any.
+func (r *Router) getRegexpGroup() *routeRegexpGroup {
+ if r.parent != nil {
+ return r.parent.getRegexpGroup()
+ }
+ return nil
+}
+
+func (r *Router) buildVars(m map[string]string) map[string]string {
+ if r.parent != nil {
+ m = r.parent.buildVars(m)
+ }
+ return m
+}
+
+// ----------------------------------------------------------------------------
+// Route factories
+// ----------------------------------------------------------------------------
+
+// NewRoute registers an empty route.
+func (r *Router) NewRoute() *Route {
+ route := &Route{parent: r, strictSlash: r.strictSlash, skipClean: r.skipClean, useEncodedPath: r.useEncodedPath}
+ r.routes = append(r.routes, route)
+ return route
+}
+
+// Handle registers a new route with a matcher for the URL path.
+// See Route.Path() and Route.Handler().
+func (r *Router) Handle(path string, handler http.Handler) *Route {
+ return r.NewRoute().Path(path).Handler(handler)
+}
+
+// HandleFunc registers a new route with a matcher for the URL path.
+// See Route.Path() and Route.HandlerFunc().
+func (r *Router) HandleFunc(path string, f func(http.ResponseWriter,
+ *http.Request)) *Route {
+ return r.NewRoute().Path(path).HandlerFunc(f)
+}
+
+// Headers registers a new route with a matcher for request header values.
+// See Route.Headers().
+func (r *Router) Headers(pairs ...string) *Route {
+ return r.NewRoute().Headers(pairs...)
+}
+
+// Host registers a new route with a matcher for the URL host.
+// See Route.Host().
+func (r *Router) Host(tpl string) *Route {
+ return r.NewRoute().Host(tpl)
+}
+
+// MatcherFunc registers a new route with a custom matcher function.
+// See Route.MatcherFunc().
+func (r *Router) MatcherFunc(f MatcherFunc) *Route {
+ return r.NewRoute().MatcherFunc(f)
+}
+
+// Methods registers a new route with a matcher for HTTP methods.
+// See Route.Methods().
+func (r *Router) Methods(methods ...string) *Route {
+ return r.NewRoute().Methods(methods...)
+}
+
+// Path registers a new route with a matcher for the URL path.
+// See Route.Path().
+func (r *Router) Path(tpl string) *Route {
+ return r.NewRoute().Path(tpl)
+}
+
+// PathPrefix registers a new route with a matcher for the URL path prefix.
+// See Route.PathPrefix().
+func (r *Router) PathPrefix(tpl string) *Route {
+ return r.NewRoute().PathPrefix(tpl)
+}
+
+// Queries registers a new route with a matcher for URL query values.
+// See Route.Queries().
+func (r *Router) Queries(pairs ...string) *Route {
+ return r.NewRoute().Queries(pairs...)
+}
+
+// Schemes registers a new route with a matcher for URL schemes.
+// See Route.Schemes().
+func (r *Router) Schemes(schemes ...string) *Route {
+ return r.NewRoute().Schemes(schemes...)
+}
+
+// BuildVarsFunc registers a new route with a custom function for modifying
+// route variables before building a URL.
+func (r *Router) BuildVarsFunc(f BuildVarsFunc) *Route {
+ return r.NewRoute().BuildVarsFunc(f)
+}
+
+// Walk walks the router and all its sub-routers, calling walkFn for each route
+// in the tree. The routes are walked in the order they were added. Sub-routers
+// are explored depth-first.
+func (r *Router) Walk(walkFn WalkFunc) error {
+ return r.walk(walkFn, []*Route{})
+}
+
+// SkipRouter is used as a return value from WalkFuncs to indicate that the
+// router that walk is about to descend down to should be skipped.
+var SkipRouter = errors.New("skip this router")
+
+// WalkFunc is the type of the function called for each route visited by Walk.
+// At every invocation, it is given the current route, and the current router,
+// and a list of ancestor routes that lead to the current route.
+type WalkFunc func(route *Route, router *Router, ancestors []*Route) error
+
+func (r *Router) walk(walkFn WalkFunc, ancestors []*Route) error {
+ for _, t := range r.routes {
+ err := walkFn(t, r, ancestors)
+ if err == SkipRouter {
+ continue
+ }
+ if err != nil {
+ return err
+ }
+ for _, sr := range t.matchers {
+ if h, ok := sr.(*Router); ok {
+ ancestors = append(ancestors, t)
+ err := h.walk(walkFn, ancestors)
+ if err != nil {
+ return err
+ }
+ ancestors = ancestors[:len(ancestors)-1]
+ }
+ }
+ if h, ok := t.handler.(*Router); ok {
+ ancestors = append(ancestors, t)
+ err := h.walk(walkFn, ancestors)
+ if err != nil {
+ return err
+ }
+ ancestors = ancestors[:len(ancestors)-1]
+ }
+ }
+ return nil
+}
+
+// ----------------------------------------------------------------------------
+// Context
+// ----------------------------------------------------------------------------
+
+// RouteMatch stores information about a matched route.
+type RouteMatch struct {
+ Route *Route
+ Handler http.Handler
+ Vars map[string]string
+
+ // MatchErr is set to appropriate matching error
+ // It is set to ErrMethodMismatch if there is a mismatch in
+ // the request method and route method
+ MatchErr error
+}
+
+type contextKey int
+
+const (
+ varsKey contextKey = iota
+ routeKey
+)
+
+// Vars returns the route variables for the current request, if any.
+func Vars(r *http.Request) map[string]string {
+ if rv := contextGet(r, varsKey); rv != nil {
+ return rv.(map[string]string)
+ }
+ return nil
+}
+
+// CurrentRoute returns the matched route for the current request, if any.
+// This only works when called inside the handler of the matched route
+// because the matched route is stored in the request context which is cleared
+// after the handler returns, unless the KeepContext option is set on the
+// Router.
+func CurrentRoute(r *http.Request) *Route {
+ if rv := contextGet(r, routeKey); rv != nil {
+ return rv.(*Route)
+ }
+ return nil
+}
+
+func setVars(r *http.Request, val interface{}) *http.Request {
+ return contextSet(r, varsKey, val)
+}
+
+func setCurrentRoute(r *http.Request, val interface{}) *http.Request {
+ return contextSet(r, routeKey, val)
+}
+
+// ----------------------------------------------------------------------------
+// Helpers
+// ----------------------------------------------------------------------------
+
+// getPath returns the escaped path if possible; doing what URL.EscapedPath()
+// which was added in go1.5 does
+func getPath(req *http.Request) string {
+ if req.RequestURI != "" {
+ // Extract the path from RequestURI (which is escaped unlike URL.Path)
+ // as detailed here as detailed in https://golang.org/pkg/net/url/#URL
+ // for < 1.5 server side workaround
+ // http://localhost/path/here?v=1 -> /path/here
+ path := req.RequestURI
+ path = strings.TrimPrefix(path, req.URL.Scheme+`://`)
+ path = strings.TrimPrefix(path, req.URL.Host)
+ if i := strings.LastIndex(path, "?"); i > -1 {
+ path = path[:i]
+ }
+ if i := strings.LastIndex(path, "#"); i > -1 {
+ path = path[:i]
+ }
+ return path
+ }
+ return req.URL.Path
+}
+
+// cleanPath returns the canonical path for p, eliminating . and .. elements.
+// Borrowed from the net/http package.
+func cleanPath(p string) string {
+ if p == "" {
+ return "/"
+ }
+ if p[0] != '/' {
+ p = "/" + p
+ }
+ np := path.Clean(p)
+ // path.Clean removes trailing slash except for root;
+ // put the trailing slash back if necessary.
+ if p[len(p)-1] == '/' && np != "/" {
+ np += "/"
+ }
+
+ return np
+}
+
+// uniqueVars returns an error if two slices contain duplicated strings.
+func uniqueVars(s1, s2 []string) error {
+ for _, v1 := range s1 {
+ for _, v2 := range s2 {
+ if v1 == v2 {
+ return fmt.Errorf("mux: duplicated route variable %q", v2)
+ }
+ }
+ }
+ return nil
+}
+
+// checkPairs returns the count of strings passed in, and an error if
+// the count is not an even number.
+func checkPairs(pairs ...string) (int, error) {
+ length := len(pairs)
+ if length%2 != 0 {
+ return length, fmt.Errorf(
+ "mux: number of parameters must be multiple of 2, got %v", pairs)
+ }
+ return length, nil
+}
+
+// mapFromPairsToString converts variadic string parameters to a
+// string to string map.
+func mapFromPairsToString(pairs ...string) (map[string]string, error) {
+ length, err := checkPairs(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ m := make(map[string]string, length/2)
+ for i := 0; i < length; i += 2 {
+ m[pairs[i]] = pairs[i+1]
+ }
+ return m, nil
+}
+
+// mapFromPairsToRegex converts variadic string parameters to a
+// string to regex map.
+func mapFromPairsToRegex(pairs ...string) (map[string]*regexp.Regexp, error) {
+ length, err := checkPairs(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ m := make(map[string]*regexp.Regexp, length/2)
+ for i := 0; i < length; i += 2 {
+ regex, err := regexp.Compile(pairs[i+1])
+ if err != nil {
+ return nil, err
+ }
+ m[pairs[i]] = regex
+ }
+ return m, nil
+}
+
+// matchInArray returns true if the given string value is in the array.
+func matchInArray(arr []string, value string) bool {
+ for _, v := range arr {
+ if v == value {
+ return true
+ }
+ }
+ return false
+}
+
+// matchMapWithString returns true if the given key/value pairs exist in a given map.
+func matchMapWithString(toCheck map[string]string, toMatch map[string][]string, canonicalKey bool) bool {
+ for k, v := range toCheck {
+ // Check if key exists.
+ if canonicalKey {
+ k = http.CanonicalHeaderKey(k)
+ }
+ if values := toMatch[k]; values == nil {
+ return false
+ } else if v != "" {
+ // If value was defined as an empty string we only check that the
+ // key exists. Otherwise we also check for equality.
+ valueExists := false
+ for _, value := range values {
+ if v == value {
+ valueExists = true
+ break
+ }
+ }
+ if !valueExists {
+ return false
+ }
+ }
+ }
+ return true
+}
+
+// matchMapWithRegex returns true if the given key/value pairs exist in a given map compiled against
+// the given regex
+func matchMapWithRegex(toCheck map[string]*regexp.Regexp, toMatch map[string][]string, canonicalKey bool) bool {
+ for k, v := range toCheck {
+ // Check if key exists.
+ if canonicalKey {
+ k = http.CanonicalHeaderKey(k)
+ }
+ if values := toMatch[k]; values == nil {
+ return false
+ } else if v != nil {
+ // If value was defined as an empty string we only check that the
+ // key exists. Otherwise we also check for equality.
+ valueExists := false
+ for _, value := range values {
+ if v.MatchString(value) {
+ valueExists = true
+ break
+ }
+ }
+ if !valueExists {
+ return false
+ }
+ }
+ }
+ return true
+}
+
+// methodNotAllowed replies to the request with an HTTP status code 405.
+func methodNotAllowed(w http.ResponseWriter, r *http.Request) {
+ w.WriteHeader(http.StatusMethodNotAllowed)
+}
+
+// methodNotAllowedHandler returns a simple request handler
+// that replies to each request with a status code 405.
+func methodNotAllowedHandler() http.Handler { return http.HandlerFunc(methodNotAllowed) }
diff --git a/unum/vendor/github.com/gorilla/mux/regexp.go b/unum/vendor/github.com/gorilla/mux/regexp.go
new file mode 100644
index 0000000..80d1f78
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/regexp.go
@@ -0,0 +1,326 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+ "bytes"
+ "fmt"
+ "net/http"
+ "net/url"
+ "regexp"
+ "strconv"
+ "strings"
+)
+
+// newRouteRegexp parses a route template and returns a routeRegexp,
+// used to match a host, a path or a query string.
+//
+// It will extract named variables, assemble a regexp to be matched, create
+// a "reverse" template to build URLs and compile regexps to validate variable
+// values used in URL building.
+//
+// Previously we accepted only Python-like identifiers for variable
+// names ([a-zA-Z_][a-zA-Z0-9_]*), but currently the only restriction is that
+// name and pattern can't be empty, and names can't contain a colon.
+func newRouteRegexp(tpl string, matchHost, matchPrefix, matchQuery, strictSlash, useEncodedPath bool) (*routeRegexp, error) {
+ // Check if it is well-formed.
+ idxs, errBraces := braceIndices(tpl)
+ if errBraces != nil {
+ return nil, errBraces
+ }
+ // Backup the original.
+ template := tpl
+ // Now let's parse it.
+ defaultPattern := "[^/]+"
+ if matchQuery {
+ defaultPattern = ".*"
+ } else if matchHost {
+ defaultPattern = "[^.]+"
+ matchPrefix = false
+ }
+ // Only match strict slash if not matching
+ if matchPrefix || matchHost || matchQuery {
+ strictSlash = false
+ }
+ // Set a flag for strictSlash.
+ endSlash := false
+ if strictSlash && strings.HasSuffix(tpl, "/") {
+ tpl = tpl[:len(tpl)-1]
+ endSlash = true
+ }
+ varsN := make([]string, len(idxs)/2)
+ varsR := make([]*regexp.Regexp, len(idxs)/2)
+ pattern := bytes.NewBufferString("")
+ pattern.WriteByte('^')
+ reverse := bytes.NewBufferString("")
+ var end int
+ var err error
+ for i := 0; i < len(idxs); i += 2 {
+ // Set all values we are interested in.
+ raw := tpl[end:idxs[i]]
+ end = idxs[i+1]
+ parts := strings.SplitN(tpl[idxs[i]+1:end-1], ":", 2)
+ name := parts[0]
+ patt := defaultPattern
+ if len(parts) == 2 {
+ patt = parts[1]
+ }
+ // Name or pattern can't be empty.
+ if name == "" || patt == "" {
+ return nil, fmt.Errorf("mux: missing name or pattern in %q",
+ tpl[idxs[i]:end])
+ }
+ // Build the regexp pattern.
+ fmt.Fprintf(pattern, "%s(?P<%s>%s)", regexp.QuoteMeta(raw), varGroupName(i/2), patt)
+
+ // Build the reverse template.
+ fmt.Fprintf(reverse, "%s%%s", raw)
+
+ // Append variable name and compiled pattern.
+ varsN[i/2] = name
+ varsR[i/2], err = regexp.Compile(fmt.Sprintf("^%s$", patt))
+ if err != nil {
+ return nil, err
+ }
+ }
+ // Add the remaining.
+ raw := tpl[end:]
+ pattern.WriteString(regexp.QuoteMeta(raw))
+ if strictSlash {
+ pattern.WriteString("[/]?")
+ }
+ if matchQuery {
+ // Add the default pattern if the query value is empty
+ if queryVal := strings.SplitN(template, "=", 2)[1]; queryVal == "" {
+ pattern.WriteString(defaultPattern)
+ }
+ }
+ if !matchPrefix {
+ pattern.WriteByte('$')
+ }
+ reverse.WriteString(raw)
+ if endSlash {
+ reverse.WriteByte('/')
+ }
+ // Compile full regexp.
+ reg, errCompile := regexp.Compile(pattern.String())
+ if errCompile != nil {
+ return nil, errCompile
+ }
+
+ // Check for capturing groups which used to work in older versions
+ if reg.NumSubexp() != len(idxs)/2 {
+ panic(fmt.Sprintf("route %s contains capture groups in its regexp. ", template) +
+ "Only non-capturing groups are accepted: e.g. (?:pattern) instead of (pattern)")
+ }
+
+ // Done!
+ return &routeRegexp{
+ template: template,
+ matchHost: matchHost,
+ matchQuery: matchQuery,
+ strictSlash: strictSlash,
+ useEncodedPath: useEncodedPath,
+ regexp: reg,
+ reverse: reverse.String(),
+ varsN: varsN,
+ varsR: varsR,
+ }, nil
+}
+
+// routeRegexp stores a regexp to match a host or path and information to
+// collect and validate route variables.
+type routeRegexp struct {
+ // The unmodified template.
+ template string
+ // True for host match, false for path or query string match.
+ matchHost bool
+ // True for query string match, false for path and host match.
+ matchQuery bool
+ // The strictSlash value defined on the route, but disabled if PathPrefix was used.
+ strictSlash bool
+ // Determines whether to use encoded path from getPath function or unencoded
+ // req.URL.Path for path matching
+ useEncodedPath bool
+ // Expanded regexp.
+ regexp *regexp.Regexp
+ // Reverse template.
+ reverse string
+ // Variable names.
+ varsN []string
+ // Variable regexps (validators).
+ varsR []*regexp.Regexp
+}
+
+// Match matches the regexp against the URL host or path.
+func (r *routeRegexp) Match(req *http.Request, match *RouteMatch) bool {
+ if !r.matchHost {
+ if r.matchQuery {
+ return r.matchQueryString(req)
+ }
+ path := req.URL.Path
+ if r.useEncodedPath {
+ path = getPath(req)
+ }
+ return r.regexp.MatchString(path)
+ }
+
+ return r.regexp.MatchString(getHost(req))
+}
+
+// url builds a URL part using the given values.
+func (r *routeRegexp) url(values map[string]string) (string, error) {
+ urlValues := make([]interface{}, len(r.varsN))
+ for k, v := range r.varsN {
+ value, ok := values[v]
+ if !ok {
+ return "", fmt.Errorf("mux: missing route variable %q", v)
+ }
+ if r.matchQuery {
+ value = url.QueryEscape(value)
+ }
+ urlValues[k] = value
+ }
+ rv := fmt.Sprintf(r.reverse, urlValues...)
+ if !r.regexp.MatchString(rv) {
+ // The URL is checked against the full regexp, instead of checking
+ // individual variables. This is faster but to provide a good error
+ // message, we check individual regexps if the URL doesn't match.
+ for k, v := range r.varsN {
+ if !r.varsR[k].MatchString(values[v]) {
+ return "", fmt.Errorf(
+ "mux: variable %q doesn't match, expected %q", values[v],
+ r.varsR[k].String())
+ }
+ }
+ }
+ return rv, nil
+}
+
+// getURLQuery returns a single query parameter from a request URL.
+// For a URL with foo=bar&baz=ding, we return only the relevant key
+// value pair for the routeRegexp.
+func (r *routeRegexp) getURLQuery(req *http.Request) string {
+ if !r.matchQuery {
+ return ""
+ }
+ templateKey := strings.SplitN(r.template, "=", 2)[0]
+ for key, vals := range req.URL.Query() {
+ if key == templateKey && len(vals) > 0 {
+ return key + "=" + vals[0]
+ }
+ }
+ return ""
+}
+
+func (r *routeRegexp) matchQueryString(req *http.Request) bool {
+ return r.regexp.MatchString(r.getURLQuery(req))
+}
+
+// braceIndices returns the first level curly brace indices from a string.
+// It returns an error in case of unbalanced braces.
+func braceIndices(s string) ([]int, error) {
+ var level, idx int
+ var idxs []int
+ for i := 0; i < len(s); i++ {
+ switch s[i] {
+ case '{':
+ if level++; level == 1 {
+ idx = i
+ }
+ case '}':
+ if level--; level == 0 {
+ idxs = append(idxs, idx, i+1)
+ } else if level < 0 {
+ return nil, fmt.Errorf("mux: unbalanced braces in %q", s)
+ }
+ }
+ }
+ if level != 0 {
+ return nil, fmt.Errorf("mux: unbalanced braces in %q", s)
+ }
+ return idxs, nil
+}
+
+// varGroupName builds a capturing group name for the indexed variable.
+func varGroupName(idx int) string {
+ return "v" + strconv.Itoa(idx)
+}
+
+// ----------------------------------------------------------------------------
+// routeRegexpGroup
+// ----------------------------------------------------------------------------
+
+// routeRegexpGroup groups the route matchers that carry variables.
+type routeRegexpGroup struct {
+ host *routeRegexp
+ path *routeRegexp
+ queries []*routeRegexp
+}
+
+// setMatch extracts the variables from the URL once a route matches.
+func (v *routeRegexpGroup) setMatch(req *http.Request, m *RouteMatch, r *Route) {
+ // Store host variables.
+ if v.host != nil {
+ host := getHost(req)
+ matches := v.host.regexp.FindStringSubmatchIndex(host)
+ if len(matches) > 0 {
+ extractVars(host, matches, v.host.varsN, m.Vars)
+ }
+ }
+ path := req.URL.Path
+ if r.useEncodedPath {
+ path = getPath(req)
+ }
+ // Store path variables.
+ if v.path != nil {
+ matches := v.path.regexp.FindStringSubmatchIndex(path)
+ if len(matches) > 0 {
+ extractVars(path, matches, v.path.varsN, m.Vars)
+ // Check if we should redirect.
+ if v.path.strictSlash {
+ p1 := strings.HasSuffix(path, "/")
+ p2 := strings.HasSuffix(v.path.template, "/")
+ if p1 != p2 {
+ u, _ := url.Parse(req.URL.String())
+ if p1 {
+ u.Path = u.Path[:len(u.Path)-1]
+ } else {
+ u.Path += "/"
+ }
+ m.Handler = http.RedirectHandler(u.String(), 301)
+ }
+ }
+ }
+ }
+ // Store query string variables.
+ for _, q := range v.queries {
+ queryURL := q.getURLQuery(req)
+ matches := q.regexp.FindStringSubmatchIndex(queryURL)
+ if len(matches) > 0 {
+ extractVars(queryURL, matches, q.varsN, m.Vars)
+ }
+ }
+}
+
+// getHost tries its best to return the request host.
+func getHost(r *http.Request) string {
+ if r.URL.IsAbs() {
+ return r.URL.Host
+ }
+ host := r.Host
+ // Slice off any port information.
+ if i := strings.Index(host, ":"); i != -1 {
+ host = host[:i]
+ }
+ return host
+
+}
+
+func extractVars(input string, matches []int, names []string, output map[string]string) {
+ for i, name := range names {
+ output[name] = input[matches[2*i+2]:matches[2*i+3]]
+ }
+}
diff --git a/unum/vendor/github.com/gorilla/mux/route.go b/unum/vendor/github.com/gorilla/mux/route.go
new file mode 100644
index 0000000..6863adb
--- /dev/null
+++ b/unum/vendor/github.com/gorilla/mux/route.go
@@ -0,0 +1,713 @@
+// Copyright 2012 The Gorilla Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package mux
+
+import (
+ "errors"
+ "fmt"
+ "net/http"
+ "net/url"
+ "regexp"
+ "strings"
+)
+
+// Route stores information to match a request and build URLs.
+type Route struct {
+ // Parent where the route was registered (a Router).
+ parent parentRoute
+ // Request handler for the route.
+ handler http.Handler
+ // List of matchers.
+ matchers []matcher
+ // Manager for the variables from host and path.
+ regexp *routeRegexpGroup
+ // If true, when the path pattern is "/path/", accessing "/path" will
+ // redirect to the former and vice versa.
+ strictSlash bool
+ // If true, when the path pattern is "/path//to", accessing "/path//to"
+ // will not redirect
+ skipClean bool
+ // If true, "/path/foo%2Fbar/to" will match the path "/path/{var}/to"
+ useEncodedPath bool
+ // The scheme used when building URLs.
+ buildScheme string
+ // If true, this route never matches: it is only used to build URLs.
+ buildOnly bool
+ // The name used to build URLs.
+ name string
+ // Error resulted from building a route.
+ err error
+
+ buildVarsFunc BuildVarsFunc
+}
+
+func (r *Route) SkipClean() bool {
+ return r.skipClean
+}
+
+// Match matches the route against the request.
+func (r *Route) Match(req *http.Request, match *RouteMatch) bool {
+ if r.buildOnly || r.err != nil {
+ return false
+ }
+
+ var matchErr error
+
+ // Match everything.
+ for _, m := range r.matchers {
+ if matched := m.Match(req, match); !matched {
+ if _, ok := m.(methodMatcher); ok {
+ matchErr = ErrMethodMismatch
+ continue
+ }
+ matchErr = nil
+ return false
+ }
+ }
+
+ if matchErr != nil {
+ match.MatchErr = matchErr
+ return false
+ }
+
+ match.MatchErr = nil
+ // Yay, we have a match. Let's collect some info about it.
+ if match.Route == nil {
+ match.Route = r
+ }
+ if match.Handler == nil {
+ match.Handler = r.handler
+ }
+ if match.Vars == nil {
+ match.Vars = make(map[string]string)
+ }
+
+ // Set variables.
+ if r.regexp != nil {
+ r.regexp.setMatch(req, match, r)
+ }
+ return true
+}
+
+// ----------------------------------------------------------------------------
+// Route attributes
+// ----------------------------------------------------------------------------
+
+// GetError returns an error resulted from building the route, if any.
+func (r *Route) GetError() error {
+ return r.err
+}
+
+// BuildOnly sets the route to never match: it is only used to build URLs.
+func (r *Route) BuildOnly() *Route {
+ r.buildOnly = true
+ return r
+}
+
+// Handler --------------------------------------------------------------------
+
+// Handler sets a handler for the route.
+func (r *Route) Handler(handler http.Handler) *Route {
+ if r.err == nil {
+ r.handler = handler
+ }
+ return r
+}
+
+// HandlerFunc sets a handler function for the route.
+func (r *Route) HandlerFunc(f func(http.ResponseWriter, *http.Request)) *Route {
+ return r.Handler(http.HandlerFunc(f))
+}
+
+// GetHandler returns the handler for the route, if any.
+func (r *Route) GetHandler() http.Handler {
+ return r.handler
+}
+
+// Name -----------------------------------------------------------------------
+
+// Name sets the name for the route, used to build URLs.
+// If the name was registered already it will be overwritten.
+func (r *Route) Name(name string) *Route {
+ if r.name != "" {
+ r.err = fmt.Errorf("mux: route already has name %q, can't set %q",
+ r.name, name)
+ }
+ if r.err == nil {
+ r.name = name
+ r.getNamedRoutes()[name] = r
+ }
+ return r
+}
+
+// GetName returns the name for the route, if any.
+func (r *Route) GetName() string {
+ return r.name
+}
+
+// ----------------------------------------------------------------------------
+// Matchers
+// ----------------------------------------------------------------------------
+
+// matcher types try to match a request.
+type matcher interface {
+ Match(*http.Request, *RouteMatch) bool
+}
+
+// addMatcher adds a matcher to the route.
+func (r *Route) addMatcher(m matcher) *Route {
+ if r.err == nil {
+ r.matchers = append(r.matchers, m)
+ }
+ return r
+}
+
+// addRegexpMatcher adds a host or path matcher and builder to a route.
+func (r *Route) addRegexpMatcher(tpl string, matchHost, matchPrefix, matchQuery bool) error {
+ if r.err != nil {
+ return r.err
+ }
+ r.regexp = r.getRegexpGroup()
+ if !matchHost && !matchQuery {
+ if len(tpl) > 0 && tpl[0] != '/' {
+ return fmt.Errorf("mux: path must start with a slash, got %q", tpl)
+ }
+ if r.regexp.path != nil {
+ tpl = strings.TrimRight(r.regexp.path.template, "/") + tpl
+ }
+ }
+ rr, err := newRouteRegexp(tpl, matchHost, matchPrefix, matchQuery, r.strictSlash, r.useEncodedPath)
+ if err != nil {
+ return err
+ }
+ for _, q := range r.regexp.queries {
+ if err = uniqueVars(rr.varsN, q.varsN); err != nil {
+ return err
+ }
+ }
+ if matchHost {
+ if r.regexp.path != nil {
+ if err = uniqueVars(rr.varsN, r.regexp.path.varsN); err != nil {
+ return err
+ }
+ }
+ r.regexp.host = rr
+ } else {
+ if r.regexp.host != nil {
+ if err = uniqueVars(rr.varsN, r.regexp.host.varsN); err != nil {
+ return err
+ }
+ }
+ if matchQuery {
+ r.regexp.queries = append(r.regexp.queries, rr)
+ } else {
+ r.regexp.path = rr
+ }
+ }
+ r.addMatcher(rr)
+ return nil
+}
+
+// Headers --------------------------------------------------------------------
+
+// headerMatcher matches the request against header values.
+type headerMatcher map[string]string
+
+func (m headerMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchMapWithString(m, r.Header, true)
+}
+
+// Headers adds a matcher for request header values.
+// It accepts a sequence of key/value pairs to be matched. For example:
+//
+// r := mux.NewRouter()
+// r.Headers("Content-Type", "application/json",
+// "X-Requested-With", "XMLHttpRequest")
+//
+// The above route will only match if both request header values match.
+// If the value is an empty string, it will match any value if the key is set.
+func (r *Route) Headers(pairs ...string) *Route {
+ if r.err == nil {
+ var headers map[string]string
+ headers, r.err = mapFromPairsToString(pairs...)
+ return r.addMatcher(headerMatcher(headers))
+ }
+ return r
+}
+
+// headerRegexMatcher matches the request against the route given a regex for the header
+type headerRegexMatcher map[string]*regexp.Regexp
+
+func (m headerRegexMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchMapWithRegex(m, r.Header, true)
+}
+
+// HeadersRegexp accepts a sequence of key/value pairs, where the value has regex
+// support. For example:
+//
+// r := mux.NewRouter()
+// r.HeadersRegexp("Content-Type", "application/(text|json)",
+// "X-Requested-With", "XMLHttpRequest")
+//
+// The above route will only match if both the request header matches both regular expressions.
+// It the value is an empty string, it will match any value if the key is set.
+func (r *Route) HeadersRegexp(pairs ...string) *Route {
+ if r.err == nil {
+ var headers map[string]*regexp.Regexp
+ headers, r.err = mapFromPairsToRegex(pairs...)
+ return r.addMatcher(headerRegexMatcher(headers))
+ }
+ return r
+}
+
+// Host -----------------------------------------------------------------------
+
+// Host adds a matcher for the URL host.
+// It accepts a template with zero or more URL variables enclosed by {}.
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next dot.
+//
+// - {name:pattern} matches the given regexp pattern.
+//
+// For example:
+//
+// r := mux.NewRouter()
+// r.Host("www.example.com")
+// r.Host("{subdomain}.domain.com")
+// r.Host("{subdomain:[a-z]+}.domain.com")
+//
+// Variable names must be unique in a given route. They can be retrieved
+// calling mux.Vars(request).
+func (r *Route) Host(tpl string) *Route {
+ r.err = r.addRegexpMatcher(tpl, true, false, false)
+ return r
+}
+
+// MatcherFunc ----------------------------------------------------------------
+
+// MatcherFunc is the function signature used by custom matchers.
+type MatcherFunc func(*http.Request, *RouteMatch) bool
+
+// Match returns the match for a given request.
+func (m MatcherFunc) Match(r *http.Request, match *RouteMatch) bool {
+ return m(r, match)
+}
+
+// MatcherFunc adds a custom function to be used as request matcher.
+func (r *Route) MatcherFunc(f MatcherFunc) *Route {
+ return r.addMatcher(f)
+}
+
+// Methods --------------------------------------------------------------------
+
+// methodMatcher matches the request against HTTP methods.
+type methodMatcher []string
+
+func (m methodMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchInArray(m, r.Method)
+}
+
+// Methods adds a matcher for HTTP methods.
+// It accepts a sequence of one or more methods to be matched, e.g.:
+// "GET", "POST", "PUT".
+func (r *Route) Methods(methods ...string) *Route {
+ for k, v := range methods {
+ methods[k] = strings.ToUpper(v)
+ }
+ return r.addMatcher(methodMatcher(methods))
+}
+
+// Path -----------------------------------------------------------------------
+
+// Path adds a matcher for the URL path.
+// It accepts a template with zero or more URL variables enclosed by {}. The
+// template must start with a "/".
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next slash.
+//
+// - {name:pattern} matches the given regexp pattern.
+//
+// For example:
+//
+// r := mux.NewRouter()
+// r.Path("/products/").Handler(ProductsHandler)
+// r.Path("/products/{key}").Handler(ProductsHandler)
+// r.Path("/articles/{category}/{id:[0-9]+}").
+// Handler(ArticleHandler)
+//
+// Variable names must be unique in a given route. They can be retrieved
+// calling mux.Vars(request).
+func (r *Route) Path(tpl string) *Route {
+ r.err = r.addRegexpMatcher(tpl, false, false, false)
+ return r
+}
+
+// PathPrefix -----------------------------------------------------------------
+
+// PathPrefix adds a matcher for the URL path prefix. This matches if the given
+// template is a prefix of the full URL path. See Route.Path() for details on
+// the tpl argument.
+//
+// Note that it does not treat slashes specially ("/foobar/" will be matched by
+// the prefix "/foo") so you may want to use a trailing slash here.
+//
+// Also note that the setting of Router.StrictSlash() has no effect on routes
+// with a PathPrefix matcher.
+func (r *Route) PathPrefix(tpl string) *Route {
+ r.err = r.addRegexpMatcher(tpl, false, true, false)
+ return r
+}
+
+// Query ----------------------------------------------------------------------
+
+// Queries adds a matcher for URL query values.
+// It accepts a sequence of key/value pairs. Values may define variables.
+// For example:
+//
+// r := mux.NewRouter()
+// r.Queries("foo", "bar", "id", "{id:[0-9]+}")
+//
+// The above route will only match if the URL contains the defined queries
+// values, e.g.: ?foo=bar&id=42.
+//
+// It the value is an empty string, it will match any value if the key is set.
+//
+// Variables can define an optional regexp pattern to be matched:
+//
+// - {name} matches anything until the next slash.
+//
+// - {name:pattern} matches the given regexp pattern.
+func (r *Route) Queries(pairs ...string) *Route {
+ length := len(pairs)
+ if length%2 != 0 {
+ r.err = fmt.Errorf(
+ "mux: number of parameters must be multiple of 2, got %v", pairs)
+ return nil
+ }
+ for i := 0; i < length; i += 2 {
+ if r.err = r.addRegexpMatcher(pairs[i]+"="+pairs[i+1], false, false, true); r.err != nil {
+ return r
+ }
+ }
+
+ return r
+}
+
+// Schemes --------------------------------------------------------------------
+
+// schemeMatcher matches the request against URL schemes.
+type schemeMatcher []string
+
+func (m schemeMatcher) Match(r *http.Request, match *RouteMatch) bool {
+ return matchInArray(m, r.URL.Scheme)
+}
+
+// Schemes adds a matcher for URL schemes.
+// It accepts a sequence of schemes to be matched, e.g.: "http", "https".
+func (r *Route) Schemes(schemes ...string) *Route {
+ for k, v := range schemes {
+ schemes[k] = strings.ToLower(v)
+ }
+ if r.buildScheme == "" && len(schemes) > 0 {
+ r.buildScheme = schemes[0]
+ }
+ return r.addMatcher(schemeMatcher(schemes))
+}
+
+// BuildVarsFunc --------------------------------------------------------------
+
+// BuildVarsFunc is the function signature used by custom build variable
+// functions (which can modify route variables before a route's URL is built).
+type BuildVarsFunc func(map[string]string) map[string]string
+
+// BuildVarsFunc adds a custom function to be used to modify build variables
+// before a route's URL is built.
+func (r *Route) BuildVarsFunc(f BuildVarsFunc) *Route {
+ r.buildVarsFunc = f
+ return r
+}
+
+// Subrouter ------------------------------------------------------------------
+
+// Subrouter creates a subrouter for the route.
+//
+// It will test the inner routes only if the parent route matched. For example:
+//
+// r := mux.NewRouter()
+// s := r.Host("www.example.com").Subrouter()
+// s.HandleFunc("/products/", ProductsHandler)
+// s.HandleFunc("/products/{key}", ProductHandler)
+// s.HandleFunc("/articles/{category}/{id:[0-9]+}"), ArticleHandler)
+//
+// Here, the routes registered in the subrouter won't be tested if the host
+// doesn't match.
+func (r *Route) Subrouter() *Router {
+ router := &Router{parent: r, strictSlash: r.strictSlash}
+ r.addMatcher(router)
+ return router
+}
+
+// ----------------------------------------------------------------------------
+// URL building
+// ----------------------------------------------------------------------------
+
+// URL builds a URL for the route.
+//
+// It accepts a sequence of key/value pairs for the route variables. For
+// example, given this route:
+//
+// r := mux.NewRouter()
+// r.HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+// Name("article")
+//
+// ...a URL for it can be built using:
+//
+// url, err := r.Get("article").URL("category", "technology", "id", "42")
+//
+// ...which will return an url.URL with the following path:
+//
+// "/articles/technology/42"
+//
+// This also works for host variables:
+//
+// r := mux.NewRouter()
+// r.Host("{subdomain}.domain.com").
+// HandleFunc("/articles/{category}/{id:[0-9]+}", ArticleHandler).
+// Name("article")
+//
+// // url.String() will be "http://news.domain.com/articles/technology/42"
+// url, err := r.Get("article").URL("subdomain", "news",
+// "category", "technology",
+// "id", "42")
+//
+// All variables defined in the route are required, and their values must
+// conform to the corresponding patterns.
+func (r *Route) URL(pairs ...string) (*url.URL, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ if r.regexp == nil {
+ return nil, errors.New("mux: route doesn't have a host or path")
+ }
+ values, err := r.prepareVars(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ var scheme, host, path string
+ queries := make([]string, 0, len(r.regexp.queries))
+ if r.regexp.host != nil {
+ if host, err = r.regexp.host.url(values); err != nil {
+ return nil, err
+ }
+ scheme = "http"
+ if s := r.getBuildScheme(); s != "" {
+ scheme = s
+ }
+ }
+ if r.regexp.path != nil {
+ if path, err = r.regexp.path.url(values); err != nil {
+ return nil, err
+ }
+ }
+ for _, q := range r.regexp.queries {
+ var query string
+ if query, err = q.url(values); err != nil {
+ return nil, err
+ }
+ queries = append(queries, query)
+ }
+ return &url.URL{
+ Scheme: scheme,
+ Host: host,
+ Path: path,
+ RawQuery: strings.Join(queries, "&"),
+ }, nil
+}
+
+// URLHost builds the host part of the URL for a route. See Route.URL().
+//
+// The route must have a host defined.
+func (r *Route) URLHost(pairs ...string) (*url.URL, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ if r.regexp == nil || r.regexp.host == nil {
+ return nil, errors.New("mux: route doesn't have a host")
+ }
+ values, err := r.prepareVars(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ host, err := r.regexp.host.url(values)
+ if err != nil {
+ return nil, err
+ }
+ u := &url.URL{
+ Scheme: "http",
+ Host: host,
+ }
+ if s := r.getBuildScheme(); s != "" {
+ u.Scheme = s
+ }
+ return u, nil
+}
+
+// URLPath builds the path part of the URL for a route. See Route.URL().
+//
+// The route must have a path defined.
+func (r *Route) URLPath(pairs ...string) (*url.URL, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ if r.regexp == nil || r.regexp.path == nil {
+ return nil, errors.New("mux: route doesn't have a path")
+ }
+ values, err := r.prepareVars(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ path, err := r.regexp.path.url(values)
+ if err != nil {
+ return nil, err
+ }
+ return &url.URL{
+ Path: path,
+ }, nil
+}
+
+// GetPathTemplate returns the template used to build the
+// route match.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a path.
+func (r *Route) GetPathTemplate() (string, error) {
+ if r.err != nil {
+ return "", r.err
+ }
+ if r.regexp == nil || r.regexp.path == nil {
+ return "", errors.New("mux: route doesn't have a path")
+ }
+ return r.regexp.path.template, nil
+}
+
+// GetPathRegexp returns the expanded regular expression used to match route path.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a path.
+func (r *Route) GetPathRegexp() (string, error) {
+ if r.err != nil {
+ return "", r.err
+ }
+ if r.regexp == nil || r.regexp.path == nil {
+ return "", errors.New("mux: route does not have a path")
+ }
+ return r.regexp.path.regexp.String(), nil
+}
+
+// GetMethods returns the methods the route matches against
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An empty list will be returned if route does not have methods.
+func (r *Route) GetMethods() ([]string, error) {
+ if r.err != nil {
+ return nil, r.err
+ }
+ for _, m := range r.matchers {
+ if methods, ok := m.(methodMatcher); ok {
+ return []string(methods), nil
+ }
+ }
+ return nil, nil
+}
+
+// GetHostTemplate returns the template used to build the
+// route match.
+// This is useful for building simple REST API documentation and for instrumentation
+// against third-party services.
+// An error will be returned if the route does not define a host.
+func (r *Route) GetHostTemplate() (string, error) {
+ if r.err != nil {
+ return "", r.err
+ }
+ if r.regexp == nil || r.regexp.host == nil {
+ return "", errors.New("mux: route doesn't have a host")
+ }
+ return r.regexp.host.template, nil
+}
+
+// prepareVars converts the route variable pairs into a map. If the route has a
+// BuildVarsFunc, it is invoked.
+func (r *Route) prepareVars(pairs ...string) (map[string]string, error) {
+ m, err := mapFromPairsToString(pairs...)
+ if err != nil {
+ return nil, err
+ }
+ return r.buildVars(m), nil
+}
+
+func (r *Route) buildVars(m map[string]string) map[string]string {
+ if r.parent != nil {
+ m = r.parent.buildVars(m)
+ }
+ if r.buildVarsFunc != nil {
+ m = r.buildVarsFunc(m)
+ }
+ return m
+}
+
+// ----------------------------------------------------------------------------
+// parentRoute
+// ----------------------------------------------------------------------------
+
+// parentRoute allows routes to know about parent host and path definitions.
+type parentRoute interface {
+ getBuildScheme() string
+ getNamedRoutes() map[string]*Route
+ getRegexpGroup() *routeRegexpGroup
+ buildVars(map[string]string) map[string]string
+}
+
+func (r *Route) getBuildScheme() string {
+ if r.buildScheme != "" {
+ return r.buildScheme
+ }
+ if r.parent != nil {
+ return r.parent.getBuildScheme()
+ }
+ return ""
+}
+
+// getNamedRoutes returns the map where named routes are registered.
+func (r *Route) getNamedRoutes() map[string]*Route {
+ if r.parent == nil {
+ // During tests router is not always set.
+ r.parent = NewRouter()
+ }
+ return r.parent.getNamedRoutes()
+}
+
+// getRegexpGroup returns regexp definitions from this route.
+func (r *Route) getRegexpGroup() *routeRegexpGroup {
+ if r.regexp == nil {
+ if r.parent == nil {
+ // During tests router is not always set.
+ r.parent = NewRouter()
+ }
+ regexp := r.parent.getRegexpGroup()
+ if regexp == nil {
+ r.regexp = new(routeRegexpGroup)
+ } else {
+ // Copy.
+ r.regexp = &routeRegexpGroup{
+ host: regexp.host,
+ path: regexp.path,
+ queries: regexp.queries,
+ }
+ }
+ }
+ return r.regexp
+}