diff --git a/unum/vendor/golang.org/x/net/http2/server.go b/unum/vendor/golang.org/x/net/http2/server.go
new file mode 100644
index 0000000..eae143d
--- /dev/null
+++ b/unum/vendor/golang.org/x/net/http2/server.go
@@ -0,0 +1,2857 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// TODO: turn off the serve goroutine when idle, so
+// an idle conn only has the readFrames goroutine active. (which could
+// also be optimized probably to pin less memory in crypto/tls). This
+// would involve tracking when the serve goroutine is active (atomic
+// int32 read/CAS probably?) and starting it up when frames arrive,
+// and shutting it down when all handlers exit. the occasional PING
+// packets could use time.AfterFunc to call sc.wakeStartServeLoop()
+// (which is a no-op if already running) and then queue the PING write
+// as normal. The serve loop would then exit in most cases (if no
+// Handlers running) and not be woken up again until the PING packet
+// returns.
+
+// TODO (maybe): add a mechanism for Handlers to going into
+// half-closed-local mode (rw.(io.Closer) test?) but not exit their
+// handler, and continue to be able to read from the
+// Request.Body. This would be a somewhat semantic change from HTTP/1
+// (or at least what we expose in net/http), so I'd probably want to
+// add it there too. For now, this package says that returning from
+// the Handler ServeHTTP function means you're both done reading and
+// done writing, without a way to stop just one or the other.
+
+package http2
+
+import (
+	"bufio"
+	"bytes"
+	"crypto/tls"
+	"errors"
+	"fmt"
+	"io"
+	"log"
+	"math"
+	"net"
+	"net/http"
+	"net/textproto"
+	"net/url"
+	"os"
+	"reflect"
+	"runtime"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"golang.org/x/net/http2/hpack"
+)
+
+const (
+	prefaceTimeout        = 10 * time.Second
+	firstSettingsTimeout  = 2 * time.Second // should be in-flight with preface anyway
+	handlerChunkWriteSize = 4 << 10
+	defaultMaxStreams     = 250 // TODO: make this 100 as the GFE seems to?
+)
+
+var (
+	errClientDisconnected = errors.New("client disconnected")
+	errClosedBody         = errors.New("body closed by handler")
+	errHandlerComplete    = errors.New("http2: request body closed due to handler exiting")
+	errStreamClosed       = errors.New("http2: stream closed")
+)
+
+var responseWriterStatePool = sync.Pool{
+	New: func() interface{} {
+		rws := &responseWriterState{}
+		rws.bw = bufio.NewWriterSize(chunkWriter{rws}, handlerChunkWriteSize)
+		return rws
+	},
+}
+
+// Test hooks.
+var (
+	testHookOnConn        func()
+	testHookGetServerConn func(*serverConn)
+	testHookOnPanicMu     *sync.Mutex // nil except in tests
+	testHookOnPanic       func(sc *serverConn, panicVal interface{}) (rePanic bool)
+)
+
+// Server is an HTTP/2 server.
+type Server struct {
+	// MaxHandlers limits the number of http.Handler ServeHTTP goroutines
+	// which may run at a time over all connections.
+	// Negative or zero no limit.
+	// TODO: implement
+	MaxHandlers int
+
+	// MaxConcurrentStreams optionally specifies the number of
+	// concurrent streams that each client may have open at a
+	// time. This is unrelated to the number of http.Handler goroutines
+	// which may be active globally, which is MaxHandlers.
+	// If zero, MaxConcurrentStreams defaults to at least 100, per
+	// the HTTP/2 spec's recommendations.
+	MaxConcurrentStreams uint32
+
+	// MaxReadFrameSize optionally specifies the largest frame
+	// this server is willing to read. A valid value is between
+	// 16k and 16M, inclusive. If zero or otherwise invalid, a
+	// default value is used.
+	MaxReadFrameSize uint32
+
+	// PermitProhibitedCipherSuites, if true, permits the use of
+	// cipher suites prohibited by the HTTP/2 spec.
+	PermitProhibitedCipherSuites bool
+
+	// IdleTimeout specifies how long until idle clients should be
+	// closed with a GOAWAY frame. PING frames are not considered
+	// activity for the purposes of IdleTimeout.
+	IdleTimeout time.Duration
+
+	// MaxUploadBufferPerConnection is the size of the initial flow
+	// control window for each connections. The HTTP/2 spec does not
+	// allow this to be smaller than 65535 or larger than 2^32-1.
+	// If the value is outside this range, a default value will be
+	// used instead.
+	MaxUploadBufferPerConnection int32
+
+	// MaxUploadBufferPerStream is the size of the initial flow control
+	// window for each stream. The HTTP/2 spec does not allow this to
+	// be larger than 2^32-1. If the value is zero or larger than the
+	// maximum, a default value will be used instead.
+	MaxUploadBufferPerStream int32
+
+	// NewWriteScheduler constructs a write scheduler for a connection.
+	// If nil, a default scheduler is chosen.
+	NewWriteScheduler func() WriteScheduler
+
+	// Internal state. This is a pointer (rather than embedded directly)
+	// so that we don't embed a Mutex in this struct, which will make the
+	// struct non-copyable, which might break some callers.
+	state *serverInternalState
+}
+
+func (s *Server) initialConnRecvWindowSize() int32 {
+	if s.MaxUploadBufferPerConnection > initialWindowSize {
+		return s.MaxUploadBufferPerConnection
+	}
+	return 1 << 20
+}
+
+func (s *Server) initialStreamRecvWindowSize() int32 {
+	if s.MaxUploadBufferPerStream > 0 {
+		return s.MaxUploadBufferPerStream
+	}
+	return 1 << 20
+}
+
+func (s *Server) maxReadFrameSize() uint32 {
+	if v := s.MaxReadFrameSize; v >= minMaxFrameSize && v <= maxFrameSize {
+		return v
+	}
+	return defaultMaxReadFrameSize
+}
+
+func (s *Server) maxConcurrentStreams() uint32 {
+	if v := s.MaxConcurrentStreams; v > 0 {
+		return v
+	}
+	return defaultMaxStreams
+}
+
+type serverInternalState struct {
+	mu          sync.Mutex
+	activeConns map[*serverConn]struct{}
+}
+
+func (s *serverInternalState) registerConn(sc *serverConn) {
+	if s == nil {
+		return // if the Server was used without calling ConfigureServer
+	}
+	s.mu.Lock()
+	s.activeConns[sc] = struct{}{}
+	s.mu.Unlock()
+}
+
+func (s *serverInternalState) unregisterConn(sc *serverConn) {
+	if s == nil {
+		return // if the Server was used without calling ConfigureServer
+	}
+	s.mu.Lock()
+	delete(s.activeConns, sc)
+	s.mu.Unlock()
+}
+
+func (s *serverInternalState) startGracefulShutdown() {
+	if s == nil {
+		return // if the Server was used without calling ConfigureServer
+	}
+	s.mu.Lock()
+	for sc := range s.activeConns {
+		sc.startGracefulShutdown()
+	}
+	s.mu.Unlock()
+}
+
+// ConfigureServer adds HTTP/2 support to a net/http Server.
+//
+// The configuration conf may be nil.
+//
+// ConfigureServer must be called before s begins serving.
+func ConfigureServer(s *http.Server, conf *Server) error {
+	if s == nil {
+		panic("nil *http.Server")
+	}
+	if conf == nil {
+		conf = new(Server)
+	}
+	conf.state = &serverInternalState{activeConns: make(map[*serverConn]struct{})}
+	if err := configureServer18(s, conf); err != nil {
+		return err
+	}
+	if err := configureServer19(s, conf); err != nil {
+		return err
+	}
+
+	if s.TLSConfig == nil {
+		s.TLSConfig = new(tls.Config)
+	} else if s.TLSConfig.CipherSuites != nil {
+		// If they already provided a CipherSuite list, return
+		// an error if it has a bad order or is missing
+		// ECDHE_RSA_WITH_AES_128_GCM_SHA256.
+		const requiredCipher = tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+		haveRequired := false
+		sawBad := false
+		for i, cs := range s.TLSConfig.CipherSuites {
+			if cs == requiredCipher {
+				haveRequired = true
+			}
+			if isBadCipher(cs) {
+				sawBad = true
+			} else if sawBad {
+				return fmt.Errorf("http2: TLSConfig.CipherSuites index %d contains an HTTP/2-approved cipher suite (%#04x), but it comes after unapproved cipher suites. With this configuration, clients that don't support previous, approved cipher suites may be given an unapproved one and reject the connection.", i, cs)
+			}
+		}
+		if !haveRequired {
+			return fmt.Errorf("http2: TLSConfig.CipherSuites is missing HTTP/2-required TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256")
+		}
+	}
+
+	// Note: not setting MinVersion to tls.VersionTLS12,
+	// as we don't want to interfere with HTTP/1.1 traffic
+	// on the user's server. We enforce TLS 1.2 later once
+	// we accept a connection. Ideally this should be done
+	// during next-proto selection, but using TLS <1.2 with
+	// HTTP/2 is still the client's bug.
+
+	s.TLSConfig.PreferServerCipherSuites = true
+
+	haveNPN := false
+	for _, p := range s.TLSConfig.NextProtos {
+		if p == NextProtoTLS {
+			haveNPN = true
+			break
+		}
+	}
+	if !haveNPN {
+		s.TLSConfig.NextProtos = append(s.TLSConfig.NextProtos, NextProtoTLS)
+	}
+
+	if s.TLSNextProto == nil {
+		s.TLSNextProto = map[string]func(*http.Server, *tls.Conn, http.Handler){}
+	}
+	protoHandler := func(hs *http.Server, c *tls.Conn, h http.Handler) {
+		if testHookOnConn != nil {
+			testHookOnConn()
+		}
+		conf.ServeConn(c, &ServeConnOpts{
+			Handler:    h,
+			BaseConfig: hs,
+		})
+	}
+	s.TLSNextProto[NextProtoTLS] = protoHandler
+	return nil
+}
+
+// ServeConnOpts are options for the Server.ServeConn method.
+type ServeConnOpts struct {
+	// BaseConfig optionally sets the base configuration
+	// for values. If nil, defaults are used.
+	BaseConfig *http.Server
+
+	// Handler specifies which handler to use for processing
+	// requests. If nil, BaseConfig.Handler is used. If BaseConfig
+	// or BaseConfig.Handler is nil, http.DefaultServeMux is used.
+	Handler http.Handler
+}
+
+func (o *ServeConnOpts) baseConfig() *http.Server {
+	if o != nil && o.BaseConfig != nil {
+		return o.BaseConfig
+	}
+	return new(http.Server)
+}
+
+func (o *ServeConnOpts) handler() http.Handler {
+	if o != nil {
+		if o.Handler != nil {
+			return o.Handler
+		}
+		if o.BaseConfig != nil && o.BaseConfig.Handler != nil {
+			return o.BaseConfig.Handler
+		}
+	}
+	return http.DefaultServeMux
+}
+
+// ServeConn serves HTTP/2 requests on the provided connection and
+// blocks until the connection is no longer readable.
+//
+// ServeConn starts speaking HTTP/2 assuming that c has not had any
+// reads or writes. It writes its initial settings frame and expects
+// to be able to read the preface and settings frame from the
+// client. If c has a ConnectionState method like a *tls.Conn, the
+// ConnectionState is used to verify the TLS ciphersuite and to set
+// the Request.TLS field in Handlers.
+//
+// ServeConn does not support h2c by itself. Any h2c support must be
+// implemented in terms of providing a suitably-behaving net.Conn.
+//
+// The opts parameter is optional. If nil, default values are used.
+func (s *Server) ServeConn(c net.Conn, opts *ServeConnOpts) {
+	baseCtx, cancel := serverConnBaseContext(c, opts)
+	defer cancel()
+
+	sc := &serverConn{
+		srv:                         s,
+		hs:                          opts.baseConfig(),
+		conn:                        c,
+		baseCtx:                     baseCtx,
+		remoteAddrStr:               c.RemoteAddr().String(),
+		bw:                          newBufferedWriter(c),
+		handler:                     opts.handler(),
+		streams:                     make(map[uint32]*stream),
+		readFrameCh:                 make(chan readFrameResult),
+		wantWriteFrameCh:            make(chan FrameWriteRequest, 8),
+		serveMsgCh:                  make(chan interface{}, 8),
+		wroteFrameCh:                make(chan frameWriteResult, 1), // buffered; one send in writeFrameAsync
+		bodyReadCh:                  make(chan bodyReadMsg),         // buffering doesn't matter either way
+		doneServing:                 make(chan struct{}),
+		clientMaxStreams:            math.MaxUint32, // Section 6.5.2: "Initially, there is no limit to this value"
+		advMaxStreams:               s.maxConcurrentStreams(),
+		initialStreamSendWindowSize: initialWindowSize,
+		maxFrameSize:                initialMaxFrameSize,
+		headerTableSize:             initialHeaderTableSize,
+		serveG:                      newGoroutineLock(),
+		pushEnabled:                 true,
+	}
+
+	s.state.registerConn(sc)
+	defer s.state.unregisterConn(sc)
+
+	// The net/http package sets the write deadline from the
+	// http.Server.WriteTimeout during the TLS handshake, but then
+	// passes the connection off to us with the deadline already set.
+	// Write deadlines are set per stream in serverConn.newStream.
+	// Disarm the net.Conn write deadline here.
+	if sc.hs.WriteTimeout != 0 {
+		sc.conn.SetWriteDeadline(time.Time{})
+	}
+
+	if s.NewWriteScheduler != nil {
+		sc.writeSched = s.NewWriteScheduler()
+	} else {
+		sc.writeSched = NewRandomWriteScheduler()
+	}
+
+	// These start at the RFC-specified defaults. If there is a higher
+	// configured value for inflow, that will be updated when we send a
+	// WINDOW_UPDATE shortly after sending SETTINGS.
+	sc.flow.add(initialWindowSize)
+	sc.inflow.add(initialWindowSize)
+	sc.hpackEncoder = hpack.NewEncoder(&sc.headerWriteBuf)
+
+	fr := NewFramer(sc.bw, c)
+	fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
+	fr.MaxHeaderListSize = sc.maxHeaderListSize()
+	fr.SetMaxReadFrameSize(s.maxReadFrameSize())
+	sc.framer = fr
+
+	if tc, ok := c.(connectionStater); ok {
+		sc.tlsState = new(tls.ConnectionState)
+		*sc.tlsState = tc.ConnectionState()
+		// 9.2 Use of TLS Features
+		// An implementation of HTTP/2 over TLS MUST use TLS
+		// 1.2 or higher with the restrictions on feature set
+		// and cipher suite described in this section. Due to
+		// implementation limitations, it might not be
+		// possible to fail TLS negotiation. An endpoint MUST
+		// immediately terminate an HTTP/2 connection that
+		// does not meet the TLS requirements described in
+		// this section with a connection error (Section
+		// 5.4.1) of type INADEQUATE_SECURITY.
+		if sc.tlsState.Version < tls.VersionTLS12 {
+			sc.rejectConn(ErrCodeInadequateSecurity, "TLS version too low")
+			return
+		}
+
+		if sc.tlsState.ServerName == "" {
+			// Client must use SNI, but we don't enforce that anymore,
+			// since it was causing problems when connecting to bare IP
+			// addresses during development.
+			//
+			// TODO: optionally enforce? Or enforce at the time we receive
+			// a new request, and verify the the ServerName matches the :authority?
+			// But that precludes proxy situations, perhaps.
+			//
+			// So for now, do nothing here again.
+		}
+
+		if !s.PermitProhibitedCipherSuites && isBadCipher(sc.tlsState.CipherSuite) {
+			// "Endpoints MAY choose to generate a connection error
+			// (Section 5.4.1) of type INADEQUATE_SECURITY if one of
+			// the prohibited cipher suites are negotiated."
+			//
+			// We choose that. In my opinion, the spec is weak
+			// here. It also says both parties must support at least
+			// TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 so there's no
+			// excuses here. If we really must, we could allow an
+			// "AllowInsecureWeakCiphers" option on the server later.
+			// Let's see how it plays out first.
+			sc.rejectConn(ErrCodeInadequateSecurity, fmt.Sprintf("Prohibited TLS 1.2 Cipher Suite: %x", sc.tlsState.CipherSuite))
+			return
+		}
+	}
+
+	if hook := testHookGetServerConn; hook != nil {
+		hook(sc)
+	}
+	sc.serve()
+}
+
+func (sc *serverConn) rejectConn(err ErrCode, debug string) {
+	sc.vlogf("http2: server rejecting conn: %v, %s", err, debug)
+	// ignoring errors. hanging up anyway.
+	sc.framer.WriteGoAway(0, err, []byte(debug))
+	sc.bw.Flush()
+	sc.conn.Close()
+}
+
+type serverConn struct {
+	// Immutable:
+	srv              *Server
+	hs               *http.Server
+	conn             net.Conn
+	bw               *bufferedWriter // writing to conn
+	handler          http.Handler
+	baseCtx          contextContext
+	framer           *Framer
+	doneServing      chan struct{}          // closed when serverConn.serve ends
+	readFrameCh      chan readFrameResult   // written by serverConn.readFrames
+	wantWriteFrameCh chan FrameWriteRequest // from handlers -> serve
+	wroteFrameCh     chan frameWriteResult  // from writeFrameAsync -> serve, tickles more frame writes
+	bodyReadCh       chan bodyReadMsg       // from handlers -> serve
+	serveMsgCh       chan interface{}       // misc messages & code to send to / run on the serve loop
+	flow             flow                   // conn-wide (not stream-specific) outbound flow control
+	inflow           flow                   // conn-wide inbound flow control
+	tlsState         *tls.ConnectionState   // shared by all handlers, like net/http
+	remoteAddrStr    string
+	writeSched       WriteScheduler
+
+	// Everything following is owned by the serve loop; use serveG.check():
+	serveG                      goroutineLock // used to verify funcs are on serve()
+	pushEnabled                 bool
+	sawFirstSettings            bool // got the initial SETTINGS frame after the preface
+	needToSendSettingsAck       bool
+	unackedSettings             int    // how many SETTINGS have we sent without ACKs?
+	clientMaxStreams            uint32 // SETTINGS_MAX_CONCURRENT_STREAMS from client (our PUSH_PROMISE limit)
+	advMaxStreams               uint32 // our SETTINGS_MAX_CONCURRENT_STREAMS advertised the client
+	curClientStreams            uint32 // number of open streams initiated by the client
+	curPushedStreams            uint32 // number of open streams initiated by server push
+	maxClientStreamID           uint32 // max ever seen from client (odd), or 0 if there have been no client requests
+	maxPushPromiseID            uint32 // ID of the last push promise (even), or 0 if there have been no pushes
+	streams                     map[uint32]*stream
+	initialStreamSendWindowSize int32
+	maxFrameSize                int32
+	headerTableSize             uint32
+	peerMaxHeaderListSize       uint32            // zero means unknown (default)
+	canonHeader                 map[string]string // http2-lower-case -> Go-Canonical-Case
+	writingFrame                bool              // started writing a frame (on serve goroutine or separate)
+	writingFrameAsync           bool              // started a frame on its own goroutine but haven't heard back on wroteFrameCh
+	needsFrameFlush             bool              // last frame write wasn't a flush
+	inGoAway                    bool              // we've started to or sent GOAWAY
+	inFrameScheduleLoop         bool              // whether we're in the scheduleFrameWrite loop
+	needToSendGoAway            bool              // we need to schedule a GOAWAY frame write
+	goAwayCode                  ErrCode
+	shutdownTimer               *time.Timer // nil until used
+	idleTimer                   *time.Timer // nil if unused
+
+	// Owned by the writeFrameAsync goroutine:
+	headerWriteBuf bytes.Buffer
+	hpackEncoder   *hpack.Encoder
+
+	// Used by startGracefulShutdown.
+	shutdownOnce sync.Once
+}
+
+func (sc *serverConn) maxHeaderListSize() uint32 {
+	n := sc.hs.MaxHeaderBytes
+	if n <= 0 {
+		n = http.DefaultMaxHeaderBytes
+	}
+	// http2's count is in a slightly different unit and includes 32 bytes per pair.
+	// So, take the net/http.Server value and pad it up a bit, assuming 10 headers.
+	const perFieldOverhead = 32 // per http2 spec
+	const typicalHeaders = 10   // conservative
+	return uint32(n + typicalHeaders*perFieldOverhead)
+}
+
+func (sc *serverConn) curOpenStreams() uint32 {
+	sc.serveG.check()
+	return sc.curClientStreams + sc.curPushedStreams
+}
+
+// stream represents a stream. This is the minimal metadata needed by
+// the serve goroutine. Most of the actual stream state is owned by
+// the http.Handler's goroutine in the responseWriter. Because the
+// responseWriter's responseWriterState is recycled at the end of a
+// handler, this struct intentionally has no pointer to the
+// *responseWriter{,State} itself, as the Handler ending nils out the
+// responseWriter's state field.
+type stream struct {
+	// immutable:
+	sc        *serverConn
+	id        uint32
+	body      *pipe       // non-nil if expecting DATA frames
+	cw        closeWaiter // closed wait stream transitions to closed state
+	ctx       contextContext
+	cancelCtx func()
+
+	// owned by serverConn's serve loop:
+	bodyBytes        int64   // body bytes seen so far
+	declBodyBytes    int64   // or -1 if undeclared
+	flow             flow    // limits writing from Handler to client
+	inflow           flow    // what the client is allowed to POST/etc to us
+	parent           *stream // or nil
+	numTrailerValues int64
+	weight           uint8
+	state            streamState
+	resetQueued      bool        // RST_STREAM queued for write; set by sc.resetStream
+	gotTrailerHeader bool        // HEADER frame for trailers was seen
+	wroteHeaders     bool        // whether we wrote headers (not status 100)
+	writeDeadline    *time.Timer // nil if unused
+
+	trailer    http.Header // accumulated trailers
+	reqTrailer http.Header // handler's Request.Trailer
+}
+
+func (sc *serverConn) Framer() *Framer  { return sc.framer }
+func (sc *serverConn) CloseConn() error { return sc.conn.Close() }
+func (sc *serverConn) Flush() error     { return sc.bw.Flush() }
+func (sc *serverConn) HeaderEncoder() (*hpack.Encoder, *bytes.Buffer) {
+	return sc.hpackEncoder, &sc.headerWriteBuf
+}
+
+func (sc *serverConn) state(streamID uint32) (streamState, *stream) {
+	sc.serveG.check()
+	// http://tools.ietf.org/html/rfc7540#section-5.1
+	if st, ok := sc.streams[streamID]; ok {
+		return st.state, st
+	}
+	// "The first use of a new stream identifier implicitly closes all
+	// streams in the "idle" state that might have been initiated by
+	// that peer with a lower-valued stream identifier. For example, if
+	// a client sends a HEADERS frame on stream 7 without ever sending a
+	// frame on stream 5, then stream 5 transitions to the "closed"
+	// state when the first frame for stream 7 is sent or received."
+	if streamID%2 == 1 {
+		if streamID <= sc.maxClientStreamID {
+			return stateClosed, nil
+		}
+	} else {
+		if streamID <= sc.maxPushPromiseID {
+			return stateClosed, nil
+		}
+	}
+	return stateIdle, nil
+}
+
+// setConnState calls the net/http ConnState hook for this connection, if configured.
+// Note that the net/http package does StateNew and StateClosed for us.
+// There is currently no plan for StateHijacked or hijacking HTTP/2 connections.
+func (sc *serverConn) setConnState(state http.ConnState) {
+	if sc.hs.ConnState != nil {
+		sc.hs.ConnState(sc.conn, state)
+	}
+}
+
+func (sc *serverConn) vlogf(format string, args ...interface{}) {
+	if VerboseLogs {
+		sc.logf(format, args...)
+	}
+}
+
+func (sc *serverConn) logf(format string, args ...interface{}) {
+	if lg := sc.hs.ErrorLog; lg != nil {
+		lg.Printf(format, args...)
+	} else {
+		log.Printf(format, args...)
+	}
+}
+
+// errno returns v's underlying uintptr, else 0.
+//
+// TODO: remove this helper function once http2 can use build
+// tags. See comment in isClosedConnError.
+func errno(v error) uintptr {
+	if rv := reflect.ValueOf(v); rv.Kind() == reflect.Uintptr {
+		return uintptr(rv.Uint())
+	}
+	return 0
+}
+
+// isClosedConnError reports whether err is an error from use of a closed
+// network connection.
+func isClosedConnError(err error) bool {
+	if err == nil {
+		return false
+	}
+
+	// TODO: remove this string search and be more like the Windows
+	// case below. That might involve modifying the standard library
+	// to return better error types.
+	str := err.Error()
+	if strings.Contains(str, "use of closed network connection") {
+		return true
+	}
+
+	// TODO(bradfitz): x/tools/cmd/bundle doesn't really support
+	// build tags, so I can't make an http2_windows.go file with
+	// Windows-specific stuff. Fix that and move this, once we
+	// have a way to bundle this into std's net/http somehow.
+	if runtime.GOOS == "windows" {
+		if oe, ok := err.(*net.OpError); ok && oe.Op == "read" {
+			if se, ok := oe.Err.(*os.SyscallError); ok && se.Syscall == "wsarecv" {
+				const WSAECONNABORTED = 10053
+				const WSAECONNRESET = 10054
+				if n := errno(se.Err); n == WSAECONNRESET || n == WSAECONNABORTED {
+					return true
+				}
+			}
+		}
+	}
+	return false
+}
+
+func (sc *serverConn) condlogf(err error, format string, args ...interface{}) {
+	if err == nil {
+		return
+	}
+	if err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err) {
+		// Boring, expected errors.
+		sc.vlogf(format, args...)
+	} else {
+		sc.logf(format, args...)
+	}
+}
+
+func (sc *serverConn) canonicalHeader(v string) string {
+	sc.serveG.check()
+	cv, ok := commonCanonHeader[v]
+	if ok {
+		return cv
+	}
+	cv, ok = sc.canonHeader[v]
+	if ok {
+		return cv
+	}
+	if sc.canonHeader == nil {
+		sc.canonHeader = make(map[string]string)
+	}
+	cv = http.CanonicalHeaderKey(v)
+	sc.canonHeader[v] = cv
+	return cv
+}
+
+type readFrameResult struct {
+	f   Frame // valid until readMore is called
+	err error
+
+	// readMore should be called once the consumer no longer needs or
+	// retains f. After readMore, f is invalid and more frames can be
+	// read.
+	readMore func()
+}
+
+// readFrames is the loop that reads incoming frames.
+// It takes care to only read one frame at a time, blocking until the
+// consumer is done with the frame.
+// It's run on its own goroutine.
+func (sc *serverConn) readFrames() {
+	gate := make(gate)
+	gateDone := gate.Done
+	for {
+		f, err := sc.framer.ReadFrame()
+		select {
+		case sc.readFrameCh <- readFrameResult{f, err, gateDone}:
+		case <-sc.doneServing:
+			return
+		}
+		select {
+		case <-gate:
+		case <-sc.doneServing:
+			return
+		}
+		if terminalReadFrameError(err) {
+			return
+		}
+	}
+}
+
+// frameWriteResult is the message passed from writeFrameAsync to the serve goroutine.
+type frameWriteResult struct {
+	wr  FrameWriteRequest // what was written (or attempted)
+	err error             // result of the writeFrame call
+}
+
+// writeFrameAsync runs in its own goroutine and writes a single frame
+// and then reports when it's done.
+// At most one goroutine can be running writeFrameAsync at a time per
+// serverConn.
+func (sc *serverConn) writeFrameAsync(wr FrameWriteRequest) {
+	err := wr.write.writeFrame(sc)
+	sc.wroteFrameCh <- frameWriteResult{wr, err}
+}
+
+func (sc *serverConn) closeAllStreamsOnConnClose() {
+	sc.serveG.check()
+	for _, st := range sc.streams {
+		sc.closeStream(st, errClientDisconnected)
+	}
+}
+
+func (sc *serverConn) stopShutdownTimer() {
+	sc.serveG.check()
+	if t := sc.shutdownTimer; t != nil {
+		t.Stop()
+	}
+}
+
+func (sc *serverConn) notePanic() {
+	// Note: this is for serverConn.serve panicking, not http.Handler code.
+	if testHookOnPanicMu != nil {
+		testHookOnPanicMu.Lock()
+		defer testHookOnPanicMu.Unlock()
+	}
+	if testHookOnPanic != nil {
+		if e := recover(); e != nil {
+			if testHookOnPanic(sc, e) {
+				panic(e)
+			}
+		}
+	}
+}
+
+func (sc *serverConn) serve() {
+	sc.serveG.check()
+	defer sc.notePanic()
+	defer sc.conn.Close()
+	defer sc.closeAllStreamsOnConnClose()
+	defer sc.stopShutdownTimer()
+	defer close(sc.doneServing) // unblocks handlers trying to send
+
+	if VerboseLogs {
+		sc.vlogf("http2: server connection from %v on %p", sc.conn.RemoteAddr(), sc.hs)
+	}
+
+	sc.writeFrame(FrameWriteRequest{
+		write: writeSettings{
+			{SettingMaxFrameSize, sc.srv.maxReadFrameSize()},
+			{SettingMaxConcurrentStreams, sc.advMaxStreams},
+			{SettingMaxHeaderListSize, sc.maxHeaderListSize()},
+			{SettingInitialWindowSize, uint32(sc.srv.initialStreamRecvWindowSize())},
+		},
+	})
+	sc.unackedSettings++
+
+	// Each connection starts with intialWindowSize inflow tokens.
+	// If a higher value is configured, we add more tokens.
+	if diff := sc.srv.initialConnRecvWindowSize() - initialWindowSize; diff > 0 {
+		sc.sendWindowUpdate(nil, int(diff))
+	}
+
+	if err := sc.readPreface(); err != nil {
+		sc.condlogf(err, "http2: server: error reading preface from client %v: %v", sc.conn.RemoteAddr(), err)
+		return
+	}
+	// Now that we've got the preface, get us out of the
+	// "StateNew" state. We can't go directly to idle, though.
+	// Active means we read some data and anticipate a request. We'll
+	// do another Active when we get a HEADERS frame.
+	sc.setConnState(http.StateActive)
+	sc.setConnState(http.StateIdle)
+
+	if sc.srv.IdleTimeout != 0 {
+		sc.idleTimer = time.AfterFunc(sc.srv.IdleTimeout, sc.onIdleTimer)
+		defer sc.idleTimer.Stop()
+	}
+
+	go sc.readFrames() // closed by defer sc.conn.Close above
+
+	settingsTimer := time.AfterFunc(firstSettingsTimeout, sc.onSettingsTimer)
+	defer settingsTimer.Stop()
+
+	loopNum := 0
+	for {
+		loopNum++
+		select {
+		case wr := <-sc.wantWriteFrameCh:
+			if se, ok := wr.write.(StreamError); ok {
+				sc.resetStream(se)
+				break
+			}
+			sc.writeFrame(wr)
+		case res := <-sc.wroteFrameCh:
+			sc.wroteFrame(res)
+		case res := <-sc.readFrameCh:
+			if !sc.processFrameFromReader(res) {
+				return
+			}
+			res.readMore()
+			if settingsTimer != nil {
+				settingsTimer.Stop()
+				settingsTimer = nil
+			}
+		case m := <-sc.bodyReadCh:
+			sc.noteBodyRead(m.st, m.n)
+		case msg := <-sc.serveMsgCh:
+			switch v := msg.(type) {
+			case func(int):
+				v(loopNum) // for testing
+			case *serverMessage:
+				switch v {
+				case settingsTimerMsg:
+					sc.logf("timeout waiting for SETTINGS frames from %v", sc.conn.RemoteAddr())
+					return
+				case idleTimerMsg:
+					sc.vlogf("connection is idle")
+					sc.goAway(ErrCodeNo)
+				case shutdownTimerMsg:
+					sc.vlogf("GOAWAY close timer fired; closing conn from %v", sc.conn.RemoteAddr())
+					return
+				case gracefulShutdownMsg:
+					sc.startGracefulShutdownInternal()
+				default:
+					panic("unknown timer")
+				}
+			case *startPushRequest:
+				sc.startPush(v)
+			default:
+				panic(fmt.Sprintf("unexpected type %T", v))
+			}
+		}
+
+		if sc.inGoAway && sc.curOpenStreams() == 0 && !sc.needToSendGoAway && !sc.writingFrame {
+			return
+		}
+	}
+}
+
+func (sc *serverConn) awaitGracefulShutdown(sharedCh <-chan struct{}, privateCh chan struct{}) {
+	select {
+	case <-sc.doneServing:
+	case <-sharedCh:
+		close(privateCh)
+	}
+}
+
+type serverMessage int
+
+// Message values sent to serveMsgCh.
+var (
+	settingsTimerMsg    = new(serverMessage)
+	idleTimerMsg        = new(serverMessage)
+	shutdownTimerMsg    = new(serverMessage)
+	gracefulShutdownMsg = new(serverMessage)
+)
+
+func (sc *serverConn) onSettingsTimer() { sc.sendServeMsg(settingsTimerMsg) }
+func (sc *serverConn) onIdleTimer()     { sc.sendServeMsg(idleTimerMsg) }
+func (sc *serverConn) onShutdownTimer() { sc.sendServeMsg(shutdownTimerMsg) }
+
+func (sc *serverConn) sendServeMsg(msg interface{}) {
+	sc.serveG.checkNotOn() // NOT
+	select {
+	case sc.serveMsgCh <- msg:
+	case <-sc.doneServing:
+	}
+}
+
+// readPreface reads the ClientPreface greeting from the peer
+// or returns an error on timeout or an invalid greeting.
+func (sc *serverConn) readPreface() error {
+	errc := make(chan error, 1)
+	go func() {
+		// Read the client preface
+		buf := make([]byte, len(ClientPreface))
+		if _, err := io.ReadFull(sc.conn, buf); err != nil {
+			errc <- err
+		} else if !bytes.Equal(buf, clientPreface) {
+			errc <- fmt.Errorf("bogus greeting %q", buf)
+		} else {
+			errc <- nil
+		}
+	}()
+	timer := time.NewTimer(prefaceTimeout) // TODO: configurable on *Server?
+	defer timer.Stop()
+	select {
+	case <-timer.C:
+		return errors.New("timeout waiting for client preface")
+	case err := <-errc:
+		if err == nil {
+			if VerboseLogs {
+				sc.vlogf("http2: server: client %v said hello", sc.conn.RemoteAddr())
+			}
+		}
+		return err
+	}
+}
+
+var errChanPool = sync.Pool{
+	New: func() interface{} { return make(chan error, 1) },
+}
+
+var writeDataPool = sync.Pool{
+	New: func() interface{} { return new(writeData) },
+}
+
+// writeDataFromHandler writes DATA response frames from a handler on
+// the given stream.
+func (sc *serverConn) writeDataFromHandler(stream *stream, data []byte, endStream bool) error {
+	ch := errChanPool.Get().(chan error)
+	writeArg := writeDataPool.Get().(*writeData)
+	*writeArg = writeData{stream.id, data, endStream}
+	err := sc.writeFrameFromHandler(FrameWriteRequest{
+		write:  writeArg,
+		stream: stream,
+		done:   ch,
+	})
+	if err != nil {
+		return err
+	}
+	var frameWriteDone bool // the frame write is done (successfully or not)
+	select {
+	case err = <-ch:
+		frameWriteDone = true
+	case <-sc.doneServing:
+		return errClientDisconnected
+	case <-stream.cw:
+		// If both ch and stream.cw were ready (as might
+		// happen on the final Write after an http.Handler
+		// ends), prefer the write result. Otherwise this
+		// might just be us successfully closing the stream.
+		// The writeFrameAsync and serve goroutines guarantee
+		// that the ch send will happen before the stream.cw
+		// close.
+		select {
+		case err = <-ch:
+			frameWriteDone = true
+		default:
+			return errStreamClosed
+		}
+	}
+	errChanPool.Put(ch)
+	if frameWriteDone {
+		writeDataPool.Put(writeArg)
+	}
+	return err
+}
+
+// writeFrameFromHandler sends wr to sc.wantWriteFrameCh, but aborts
+// if the connection has gone away.
+//
+// This must not be run from the serve goroutine itself, else it might
+// deadlock writing to sc.wantWriteFrameCh (which is only mildly
+// buffered and is read by serve itself). If you're on the serve
+// goroutine, call writeFrame instead.
+func (sc *serverConn) writeFrameFromHandler(wr FrameWriteRequest) error {
+	sc.serveG.checkNotOn() // NOT
+	select {
+	case sc.wantWriteFrameCh <- wr:
+		return nil
+	case <-sc.doneServing:
+		// Serve loop is gone.
+		// Client has closed their connection to the server.
+		return errClientDisconnected
+	}
+}
+
+// writeFrame schedules a frame to write and sends it if there's nothing
+// already being written.
+//
+// There is no pushback here (the serve goroutine never blocks). It's
+// the http.Handlers that block, waiting for their previous frames to
+// make it onto the wire
+//
+// If you're not on the serve goroutine, use writeFrameFromHandler instead.
+func (sc *serverConn) writeFrame(wr FrameWriteRequest) {
+	sc.serveG.check()
+
+	// If true, wr will not be written and wr.done will not be signaled.
+	var ignoreWrite bool
+
+	// We are not allowed to write frames on closed streams. RFC 7540 Section
+	// 5.1.1 says: "An endpoint MUST NOT send frames other than PRIORITY on
+	// a closed stream." Our server never sends PRIORITY, so that exception
+	// does not apply.
+	//
+	// The serverConn might close an open stream while the stream's handler
+	// is still running. For example, the server might close a stream when it
+	// receives bad data from the client. If this happens, the handler might
+	// attempt to write a frame after the stream has been closed (since the
+	// handler hasn't yet been notified of the close). In this case, we simply
+	// ignore the frame. The handler will notice that the stream is closed when
+	// it waits for the frame to be written.
+	//
+	// As an exception to this rule, we allow sending RST_STREAM after close.
+	// This allows us to immediately reject new streams without tracking any
+	// state for those streams (except for the queued RST_STREAM frame). This
+	// may result in duplicate RST_STREAMs in some cases, but the client should
+	// ignore those.
+	if wr.StreamID() != 0 {
+		_, isReset := wr.write.(StreamError)
+		if state, _ := sc.state(wr.StreamID()); state == stateClosed && !isReset {
+			ignoreWrite = true
+		}
+	}
+
+	// Don't send a 100-continue response if we've already sent headers.
+	// See golang.org/issue/14030.
+	switch wr.write.(type) {
+	case *writeResHeaders:
+		wr.stream.wroteHeaders = true
+	case write100ContinueHeadersFrame:
+		if wr.stream.wroteHeaders {
+			// We do not need to notify wr.done because this frame is
+			// never written with wr.done != nil.
+			if wr.done != nil {
+				panic("wr.done != nil for write100ContinueHeadersFrame")
+			}
+			ignoreWrite = true
+		}
+	}
+
+	if !ignoreWrite {
+		sc.writeSched.Push(wr)
+	}
+	sc.scheduleFrameWrite()
+}
+
+// startFrameWrite starts a goroutine to write wr (in a separate
+// goroutine since that might block on the network), and updates the
+// serve goroutine's state about the world, updated from info in wr.
+func (sc *serverConn) startFrameWrite(wr FrameWriteRequest) {
+	sc.serveG.check()
+	if sc.writingFrame {
+		panic("internal error: can only be writing one frame at a time")
+	}
+
+	st := wr.stream
+	if st != nil {
+		switch st.state {
+		case stateHalfClosedLocal:
+			switch wr.write.(type) {
+			case StreamError, handlerPanicRST, writeWindowUpdate:
+				// RFC 7540 Section 5.1 allows sending RST_STREAM, PRIORITY, and WINDOW_UPDATE
+				// in this state. (We never send PRIORITY from the server, so that is not checked.)
+			default:
+				panic(fmt.Sprintf("internal error: attempt to send frame on a half-closed-local stream: %v", wr))
+			}
+		case stateClosed:
+			panic(fmt.Sprintf("internal error: attempt to send frame on a closed stream: %v", wr))
+		}
+	}
+	if wpp, ok := wr.write.(*writePushPromise); ok {
+		var err error
+		wpp.promisedID, err = wpp.allocatePromisedID()
+		if err != nil {
+			sc.writingFrameAsync = false
+			wr.replyToWriter(err)
+			return
+		}
+	}
+
+	sc.writingFrame = true
+	sc.needsFrameFlush = true
+	if wr.write.staysWithinBuffer(sc.bw.Available()) {
+		sc.writingFrameAsync = false
+		err := wr.write.writeFrame(sc)
+		sc.wroteFrame(frameWriteResult{wr, err})
+	} else {
+		sc.writingFrameAsync = true
+		go sc.writeFrameAsync(wr)
+	}
+}
+
+// errHandlerPanicked is the error given to any callers blocked in a read from
+// Request.Body when the main goroutine panics. Since most handlers read in the
+// the main ServeHTTP goroutine, this will show up rarely.
+var errHandlerPanicked = errors.New("http2: handler panicked")
+
+// wroteFrame is called on the serve goroutine with the result of
+// whatever happened on writeFrameAsync.
+func (sc *serverConn) wroteFrame(res frameWriteResult) {
+	sc.serveG.check()
+	if !sc.writingFrame {
+		panic("internal error: expected to be already writing a frame")
+	}
+	sc.writingFrame = false
+	sc.writingFrameAsync = false
+
+	wr := res.wr
+
+	if writeEndsStream(wr.write) {
+		st := wr.stream
+		if st == nil {
+			panic("internal error: expecting non-nil stream")
+		}
+		switch st.state {
+		case stateOpen:
+			// Here we would go to stateHalfClosedLocal in
+			// theory, but since our handler is done and
+			// the net/http package provides no mechanism
+			// for closing a ResponseWriter while still
+			// reading data (see possible TODO at top of
+			// this file), we go into closed state here
+			// anyway, after telling the peer we're
+			// hanging up on them. We'll transition to
+			// stateClosed after the RST_STREAM frame is
+			// written.
+			st.state = stateHalfClosedLocal
+			// Section 8.1: a server MAY request that the client abort
+			// transmission of a request without error by sending a
+			// RST_STREAM with an error code of NO_ERROR after sending
+			// a complete response.
+			sc.resetStream(streamError(st.id, ErrCodeNo))
+		case stateHalfClosedRemote:
+			sc.closeStream(st, errHandlerComplete)
+		}
+	} else {
+		switch v := wr.write.(type) {
+		case StreamError:
+			// st may be unknown if the RST_STREAM was generated to reject bad input.
+			if st, ok := sc.streams[v.StreamID]; ok {
+				sc.closeStream(st, v)
+			}
+		case handlerPanicRST:
+			sc.closeStream(wr.stream, errHandlerPanicked)
+		}
+	}
+
+	// Reply (if requested) to unblock the ServeHTTP goroutine.
+	wr.replyToWriter(res.err)
+
+	sc.scheduleFrameWrite()
+}
+
+// scheduleFrameWrite tickles the frame writing scheduler.
+//
+// If a frame is already being written, nothing happens. This will be called again
+// when the frame is done being written.
+//
+// If a frame isn't being written we need to send one, the best frame
+// to send is selected, preferring first things that aren't
+// stream-specific (e.g. ACKing settings), and then finding the
+// highest priority stream.
+//
+// If a frame isn't being written and there's nothing else to send, we
+// flush the write buffer.
+func (sc *serverConn) scheduleFrameWrite() {
+	sc.serveG.check()
+	if sc.writingFrame || sc.inFrameScheduleLoop {
+		return
+	}
+	sc.inFrameScheduleLoop = true
+	for !sc.writingFrameAsync {
+		if sc.needToSendGoAway {
+			sc.needToSendGoAway = false
+			sc.startFrameWrite(FrameWriteRequest{
+				write: &writeGoAway{
+					maxStreamID: sc.maxClientStreamID,
+					code:        sc.goAwayCode,
+				},
+			})
+			continue
+		}
+		if sc.needToSendSettingsAck {
+			sc.needToSendSettingsAck = false
+			sc.startFrameWrite(FrameWriteRequest{write: writeSettingsAck{}})
+			continue
+		}
+		if !sc.inGoAway || sc.goAwayCode == ErrCodeNo {
+			if wr, ok := sc.writeSched.Pop(); ok {
+				sc.startFrameWrite(wr)
+				continue
+			}
+		}
+		if sc.needsFrameFlush {
+			sc.startFrameWrite(FrameWriteRequest{write: flushFrameWriter{}})
+			sc.needsFrameFlush = false // after startFrameWrite, since it sets this true
+			continue
+		}
+		break
+	}
+	sc.inFrameScheduleLoop = false
+}
+
+// startGracefulShutdown gracefully shuts down a connection. This
+// sends GOAWAY with ErrCodeNo to tell the client we're gracefully
+// shutting down. The connection isn't closed until all current
+// streams are done.
+//
+// startGracefulShutdown returns immediately; it does not wait until
+// the connection has shut down.
+func (sc *serverConn) startGracefulShutdown() {
+	sc.serveG.checkNotOn() // NOT
+	sc.shutdownOnce.Do(func() { sc.sendServeMsg(gracefulShutdownMsg) })
+}
+
+func (sc *serverConn) startGracefulShutdownInternal() {
+	sc.goAwayIn(ErrCodeNo, 0)
+}
+
+func (sc *serverConn) goAway(code ErrCode) {
+	sc.serveG.check()
+	var forceCloseIn time.Duration
+	if code != ErrCodeNo {
+		forceCloseIn = 250 * time.Millisecond
+	} else {
+		// TODO: configurable
+		forceCloseIn = 1 * time.Second
+	}
+	sc.goAwayIn(code, forceCloseIn)
+}
+
+func (sc *serverConn) goAwayIn(code ErrCode, forceCloseIn time.Duration) {
+	sc.serveG.check()
+	if sc.inGoAway {
+		return
+	}
+	if forceCloseIn != 0 {
+		sc.shutDownIn(forceCloseIn)
+	}
+	sc.inGoAway = true
+	sc.needToSendGoAway = true
+	sc.goAwayCode = code
+	sc.scheduleFrameWrite()
+}
+
+func (sc *serverConn) shutDownIn(d time.Duration) {
+	sc.serveG.check()
+	sc.shutdownTimer = time.AfterFunc(d, sc.onShutdownTimer)
+}
+
+func (sc *serverConn) resetStream(se StreamError) {
+	sc.serveG.check()
+	sc.writeFrame(FrameWriteRequest{write: se})
+	if st, ok := sc.streams[se.StreamID]; ok {
+		st.resetQueued = true
+	}
+}
+
+// processFrameFromReader processes the serve loop's read from readFrameCh from the
+// frame-reading goroutine.
+// processFrameFromReader returns whether the connection should be kept open.
+func (sc *serverConn) processFrameFromReader(res readFrameResult) bool {
+	sc.serveG.check()
+	err := res.err
+	if err != nil {
+		if err == ErrFrameTooLarge {
+			sc.goAway(ErrCodeFrameSize)
+			return true // goAway will close the loop
+		}
+		clientGone := err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err)
+		if clientGone {
+			// TODO: could we also get into this state if
+			// the peer does a half close
+			// (e.g. CloseWrite) because they're done
+			// sending frames but they're still wanting
+			// our open replies?  Investigate.
+			// TODO: add CloseWrite to crypto/tls.Conn first
+			// so we have a way to test this? I suppose
+			// just for testing we could have a non-TLS mode.
+			return false
+		}
+	} else {
+		f := res.f
+		if VerboseLogs {
+			sc.vlogf("http2: server read frame %v", summarizeFrame(f))
+		}
+		err = sc.processFrame(f)
+		if err == nil {
+			return true
+		}
+	}
+
+	switch ev := err.(type) {
+	case StreamError:
+		sc.resetStream(ev)
+		return true
+	case goAwayFlowError:
+		sc.goAway(ErrCodeFlowControl)
+		return true
+	case ConnectionError:
+		sc.logf("http2: server connection error from %v: %v", sc.conn.RemoteAddr(), ev)
+		sc.goAway(ErrCode(ev))
+		return true // goAway will handle shutdown
+	default:
+		if res.err != nil {
+			sc.vlogf("http2: server closing client connection; error reading frame from client %s: %v", sc.conn.RemoteAddr(), err)
+		} else {
+			sc.logf("http2: server closing client connection: %v", err)
+		}
+		return false
+	}
+}
+
+func (sc *serverConn) processFrame(f Frame) error {
+	sc.serveG.check()
+
+	// First frame received must be SETTINGS.
+	if !sc.sawFirstSettings {
+		if _, ok := f.(*SettingsFrame); !ok {
+			return ConnectionError(ErrCodeProtocol)
+		}
+		sc.sawFirstSettings = true
+	}
+
+	switch f := f.(type) {
+	case *SettingsFrame:
+		return sc.processSettings(f)
+	case *MetaHeadersFrame:
+		return sc.processHeaders(f)
+	case *WindowUpdateFrame:
+		return sc.processWindowUpdate(f)
+	case *PingFrame:
+		return sc.processPing(f)
+	case *DataFrame:
+		return sc.processData(f)
+	case *RSTStreamFrame:
+		return sc.processResetStream(f)
+	case *PriorityFrame:
+		return sc.processPriority(f)
+	case *GoAwayFrame:
+		return sc.processGoAway(f)
+	case *PushPromiseFrame:
+		// A client cannot push. Thus, servers MUST treat the receipt of a PUSH_PROMISE
+		// frame as a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+		return ConnectionError(ErrCodeProtocol)
+	default:
+		sc.vlogf("http2: server ignoring frame: %v", f.Header())
+		return nil
+	}
+}
+
+func (sc *serverConn) processPing(f *PingFrame) error {
+	sc.serveG.check()
+	if f.IsAck() {
+		// 6.7 PING: " An endpoint MUST NOT respond to PING frames
+		// containing this flag."
+		return nil
+	}
+	if f.StreamID != 0 {
+		// "PING frames are not associated with any individual
+		// stream. If a PING frame is received with a stream
+		// identifier field value other than 0x0, the recipient MUST
+		// respond with a connection error (Section 5.4.1) of type
+		// PROTOCOL_ERROR."
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+		return nil
+	}
+	sc.writeFrame(FrameWriteRequest{write: writePingAck{f}})
+	return nil
+}
+
+func (sc *serverConn) processWindowUpdate(f *WindowUpdateFrame) error {
+	sc.serveG.check()
+	switch {
+	case f.StreamID != 0: // stream-level flow control
+		state, st := sc.state(f.StreamID)
+		if state == stateIdle {
+			// Section 5.1: "Receiving any frame other than HEADERS
+			// or PRIORITY on a stream in this state MUST be
+			// treated as a connection error (Section 5.4.1) of
+			// type PROTOCOL_ERROR."
+			return ConnectionError(ErrCodeProtocol)
+		}
+		if st == nil {
+			// "WINDOW_UPDATE can be sent by a peer that has sent a
+			// frame bearing the END_STREAM flag. This means that a
+			// receiver could receive a WINDOW_UPDATE frame on a "half
+			// closed (remote)" or "closed" stream. A receiver MUST
+			// NOT treat this as an error, see Section 5.1."
+			return nil
+		}
+		if !st.flow.add(int32(f.Increment)) {
+			return streamError(f.StreamID, ErrCodeFlowControl)
+		}
+	default: // connection-level flow control
+		if !sc.flow.add(int32(f.Increment)) {
+			return goAwayFlowError{}
+		}
+	}
+	sc.scheduleFrameWrite()
+	return nil
+}
+
+func (sc *serverConn) processResetStream(f *RSTStreamFrame) error {
+	sc.serveG.check()
+
+	state, st := sc.state(f.StreamID)
+	if state == stateIdle {
+		// 6.4 "RST_STREAM frames MUST NOT be sent for a
+		// stream in the "idle" state. If a RST_STREAM frame
+		// identifying an idle stream is received, the
+		// recipient MUST treat this as a connection error
+		// (Section 5.4.1) of type PROTOCOL_ERROR.
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if st != nil {
+		st.cancelCtx()
+		sc.closeStream(st, streamError(f.StreamID, f.ErrCode))
+	}
+	return nil
+}
+
+func (sc *serverConn) closeStream(st *stream, err error) {
+	sc.serveG.check()
+	if st.state == stateIdle || st.state == stateClosed {
+		panic(fmt.Sprintf("invariant; can't close stream in state %v", st.state))
+	}
+	st.state = stateClosed
+	if st.writeDeadline != nil {
+		st.writeDeadline.Stop()
+	}
+	if st.isPushed() {
+		sc.curPushedStreams--
+	} else {
+		sc.curClientStreams--
+	}
+	delete(sc.streams, st.id)
+	if len(sc.streams) == 0 {
+		sc.setConnState(http.StateIdle)
+		if sc.srv.IdleTimeout != 0 {
+			sc.idleTimer.Reset(sc.srv.IdleTimeout)
+		}
+		if h1ServerKeepAlivesDisabled(sc.hs) {
+			sc.startGracefulShutdownInternal()
+		}
+	}
+	if p := st.body; p != nil {
+		// Return any buffered unread bytes worth of conn-level flow control.
+		// See golang.org/issue/16481
+		sc.sendWindowUpdate(nil, p.Len())
+
+		p.CloseWithError(err)
+	}
+	st.cw.Close() // signals Handler's CloseNotifier, unblocks writes, etc
+	sc.writeSched.CloseStream(st.id)
+}
+
+func (sc *serverConn) processSettings(f *SettingsFrame) error {
+	sc.serveG.check()
+	if f.IsAck() {
+		sc.unackedSettings--
+		if sc.unackedSettings < 0 {
+			// Why is the peer ACKing settings we never sent?
+			// The spec doesn't mention this case, but
+			// hang up on them anyway.
+			return ConnectionError(ErrCodeProtocol)
+		}
+		return nil
+	}
+	if err := f.ForeachSetting(sc.processSetting); err != nil {
+		return err
+	}
+	sc.needToSendSettingsAck = true
+	sc.scheduleFrameWrite()
+	return nil
+}
+
+func (sc *serverConn) processSetting(s Setting) error {
+	sc.serveG.check()
+	if err := s.Valid(); err != nil {
+		return err
+	}
+	if VerboseLogs {
+		sc.vlogf("http2: server processing setting %v", s)
+	}
+	switch s.ID {
+	case SettingHeaderTableSize:
+		sc.headerTableSize = s.Val
+		sc.hpackEncoder.SetMaxDynamicTableSize(s.Val)
+	case SettingEnablePush:
+		sc.pushEnabled = s.Val != 0
+	case SettingMaxConcurrentStreams:
+		sc.clientMaxStreams = s.Val
+	case SettingInitialWindowSize:
+		return sc.processSettingInitialWindowSize(s.Val)
+	case SettingMaxFrameSize:
+		sc.maxFrameSize = int32(s.Val) // the maximum valid s.Val is < 2^31
+	case SettingMaxHeaderListSize:
+		sc.peerMaxHeaderListSize = s.Val
+	default:
+		// Unknown setting: "An endpoint that receives a SETTINGS
+		// frame with any unknown or unsupported identifier MUST
+		// ignore that setting."
+		if VerboseLogs {
+			sc.vlogf("http2: server ignoring unknown setting %v", s)
+		}
+	}
+	return nil
+}
+
+func (sc *serverConn) processSettingInitialWindowSize(val uint32) error {
+	sc.serveG.check()
+	// Note: val already validated to be within range by
+	// processSetting's Valid call.
+
+	// "A SETTINGS frame can alter the initial flow control window
+	// size for all current streams. When the value of
+	// SETTINGS_INITIAL_WINDOW_SIZE changes, a receiver MUST
+	// adjust the size of all stream flow control windows that it
+	// maintains by the difference between the new value and the
+	// old value."
+	old := sc.initialStreamSendWindowSize
+	sc.initialStreamSendWindowSize = int32(val)
+	growth := int32(val) - old // may be negative
+	for _, st := range sc.streams {
+		if !st.flow.add(growth) {
+			// 6.9.2 Initial Flow Control Window Size
+			// "An endpoint MUST treat a change to
+			// SETTINGS_INITIAL_WINDOW_SIZE that causes any flow
+			// control window to exceed the maximum size as a
+			// connection error (Section 5.4.1) of type
+			// FLOW_CONTROL_ERROR."
+			return ConnectionError(ErrCodeFlowControl)
+		}
+	}
+	return nil
+}
+
+func (sc *serverConn) processData(f *DataFrame) error {
+	sc.serveG.check()
+	if sc.inGoAway && sc.goAwayCode != ErrCodeNo {
+		return nil
+	}
+	data := f.Data()
+
+	// "If a DATA frame is received whose stream is not in "open"
+	// or "half closed (local)" state, the recipient MUST respond
+	// with a stream error (Section 5.4.2) of type STREAM_CLOSED."
+	id := f.Header().StreamID
+	state, st := sc.state(id)
+	if id == 0 || state == stateIdle {
+		// Section 5.1: "Receiving any frame other than HEADERS
+		// or PRIORITY on a stream in this state MUST be
+		// treated as a connection error (Section 5.4.1) of
+		// type PROTOCOL_ERROR."
+		return ConnectionError(ErrCodeProtocol)
+	}
+	if st == nil || state != stateOpen || st.gotTrailerHeader || st.resetQueued {
+		// This includes sending a RST_STREAM if the stream is
+		// in stateHalfClosedLocal (which currently means that
+		// the http.Handler returned, so it's done reading &
+		// done writing). Try to stop the client from sending
+		// more DATA.
+
+		// But still enforce their connection-level flow control,
+		// and return any flow control bytes since we're not going
+		// to consume them.
+		if sc.inflow.available() < int32(f.Length) {
+			return streamError(id, ErrCodeFlowControl)
+		}
+		// Deduct the flow control from inflow, since we're
+		// going to immediately add it back in
+		// sendWindowUpdate, which also schedules sending the
+		// frames.
+		sc.inflow.take(int32(f.Length))
+		sc.sendWindowUpdate(nil, int(f.Length)) // conn-level
+
+		if st != nil && st.resetQueued {
+			// Already have a stream error in flight. Don't send another.
+			return nil
+		}
+		return streamError(id, ErrCodeStreamClosed)
+	}
+	if st.body == nil {
+		panic("internal error: should have a body in this state")
+	}
+
+	// Sender sending more than they'd declared?
+	if st.declBodyBytes != -1 && st.bodyBytes+int64(len(data)) > st.declBodyBytes {
+		st.body.CloseWithError(fmt.Errorf("sender tried to send more than declared Content-Length of %d bytes", st.declBodyBytes))
+		return streamError(id, ErrCodeStreamClosed)
+	}
+	if f.Length > 0 {
+		// Check whether the client has flow control quota.
+		if st.inflow.available() < int32(f.Length) {
+			return streamError(id, ErrCodeFlowControl)
+		}
+		st.inflow.take(int32(f.Length))
+
+		if len(data) > 0 {
+			wrote, err := st.body.Write(data)
+			if err != nil {
+				return streamError(id, ErrCodeStreamClosed)
+			}
+			if wrote != len(data) {
+				panic("internal error: bad Writer")
+			}
+			st.bodyBytes += int64(len(data))
+		}
+
+		// Return any padded flow control now, since we won't
+		// refund it later on body reads.
+		if pad := int32(f.Length) - int32(len(data)); pad > 0 {
+			sc.sendWindowUpdate32(nil, pad)
+			sc.sendWindowUpdate32(st, pad)
+		}
+	}
+	if f.StreamEnded() {
+		st.endStream()
+	}
+	return nil
+}
+
+func (sc *serverConn) processGoAway(f *GoAwayFrame) error {
+	sc.serveG.check()
+	if f.ErrCode != ErrCodeNo {
+		sc.logf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+	} else {
+		sc.vlogf("http2: received GOAWAY %+v, starting graceful shutdown", f)
+	}
+	sc.startGracefulShutdownInternal()
+	// http://tools.ietf.org/html/rfc7540#section-6.8
+	// We should not create any new streams, which means we should disable push.
+	sc.pushEnabled = false
+	return nil
+}
+
+// isPushed reports whether the stream is server-initiated.
+func (st *stream) isPushed() bool {
+	return st.id%2 == 0
+}
+
+// endStream closes a Request.Body's pipe. It is called when a DATA
+// frame says a request body is over (or after trailers).
+func (st *stream) endStream() {
+	sc := st.sc
+	sc.serveG.check()
+
+	if st.declBodyBytes != -1 && st.declBodyBytes != st.bodyBytes {
+		st.body.CloseWithError(fmt.Errorf("request declared a Content-Length of %d but only wrote %d bytes",
+			st.declBodyBytes, st.bodyBytes))
+	} else {
+		st.body.closeWithErrorAndCode(io.EOF, st.copyTrailersToHandlerRequest)
+		st.body.CloseWithError(io.EOF)
+	}
+	st.state = stateHalfClosedRemote
+}
+
+// copyTrailersToHandlerRequest is run in the Handler's goroutine in
+// its Request.Body.Read just before it gets io.EOF.
+func (st *stream) copyTrailersToHandlerRequest() {
+	for k, vv := range st.trailer {
+		if _, ok := st.reqTrailer[k]; ok {
+			// Only copy it over it was pre-declared.
+			st.reqTrailer[k] = vv
+		}
+	}
+}
+
+// onWriteTimeout is run on its own goroutine (from time.AfterFunc)
+// when the stream's WriteTimeout has fired.
+func (st *stream) onWriteTimeout() {
+	st.sc.writeFrameFromHandler(FrameWriteRequest{write: streamError(st.id, ErrCodeInternal)})
+}
+
+func (sc *serverConn) processHeaders(f *MetaHeadersFrame) error {
+	sc.serveG.check()
+	id := f.StreamID
+	if sc.inGoAway {
+		// Ignore.
+		return nil
+	}
+	// http://tools.ietf.org/html/rfc7540#section-5.1.1
+	// Streams initiated by a client MUST use odd-numbered stream
+	// identifiers. [...] An endpoint that receives an unexpected
+	// stream identifier MUST respond with a connection error
+	// (Section 5.4.1) of type PROTOCOL_ERROR.
+	if id%2 != 1 {
+		return ConnectionError(ErrCodeProtocol)
+	}
+	// A HEADERS frame can be used to create a new stream or
+	// send a trailer for an open one. If we already have a stream
+	// open, let it process its own HEADERS frame (trailers at this
+	// point, if it's valid).
+	if st := sc.streams[f.StreamID]; st != nil {
+		if st.resetQueued {
+			// We're sending RST_STREAM to close the stream, so don't bother
+			// processing this frame.
+			return nil
+		}
+		return st.processTrailerHeaders(f)
+	}
+
+	// [...] The identifier of a newly established stream MUST be
+	// numerically greater than all streams that the initiating
+	// endpoint has opened or reserved. [...]  An endpoint that
+	// receives an unexpected stream identifier MUST respond with
+	// a connection error (Section 5.4.1) of type PROTOCOL_ERROR.
+	if id <= sc.maxClientStreamID {
+		return ConnectionError(ErrCodeProtocol)
+	}
+	sc.maxClientStreamID = id
+
+	if sc.idleTimer != nil {
+		sc.idleTimer.Stop()
+	}
+
+	// http://tools.ietf.org/html/rfc7540#section-5.1.2
+	// [...] Endpoints MUST NOT exceed the limit set by their peer. An
+	// endpoint that receives a HEADERS frame that causes their
+	// advertised concurrent stream limit to be exceeded MUST treat
+	// this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR
+	// or REFUSED_STREAM.
+	if sc.curClientStreams+1 > sc.advMaxStreams {
+		if sc.unackedSettings == 0 {
+			// They should know better.
+			return streamError(id, ErrCodeProtocol)
+		}
+		// Assume it's a network race, where they just haven't
+		// received our last SETTINGS update. But actually
+		// this can't happen yet, because we don't yet provide
+		// a way for users to adjust server parameters at
+		// runtime.
+		return streamError(id, ErrCodeRefusedStream)
+	}
+
+	initialState := stateOpen
+	if f.StreamEnded() {
+		initialState = stateHalfClosedRemote
+	}
+	st := sc.newStream(id, 0, initialState)
+
+	if f.HasPriority() {
+		if err := checkPriority(f.StreamID, f.Priority); err != nil {
+			return err
+		}
+		sc.writeSched.AdjustStream(st.id, f.Priority)
+	}
+
+	rw, req, err := sc.newWriterAndRequest(st, f)
+	if err != nil {
+		return err
+	}
+	st.reqTrailer = req.Trailer
+	if st.reqTrailer != nil {
+		st.trailer = make(http.Header)
+	}
+	st.body = req.Body.(*requestBody).pipe // may be nil
+	st.declBodyBytes = req.ContentLength
+
+	handler := sc.handler.ServeHTTP
+	if f.Truncated {
+		// Their header list was too long. Send a 431 error.
+		handler = handleHeaderListTooLong
+	} else if err := checkValidHTTP2RequestHeaders(req.Header); err != nil {
+		handler = new400Handler(err)
+	}
+
+	// The net/http package sets the read deadline from the
+	// http.Server.ReadTimeout during the TLS handshake, but then
+	// passes the connection off to us with the deadline already
+	// set. Disarm it here after the request headers are read,
+	// similar to how the http1 server works. Here it's
+	// technically more like the http1 Server's ReadHeaderTimeout
+	// (in Go 1.8), though. That's a more sane option anyway.
+	if sc.hs.ReadTimeout != 0 {
+		sc.conn.SetReadDeadline(time.Time{})
+	}
+
+	go sc.runHandler(rw, req, handler)
+	return nil
+}
+
+func (st *stream) processTrailerHeaders(f *MetaHeadersFrame) error {
+	sc := st.sc
+	sc.serveG.check()
+	if st.gotTrailerHeader {
+		return ConnectionError(ErrCodeProtocol)
+	}
+	st.gotTrailerHeader = true
+	if !f.StreamEnded() {
+		return streamError(st.id, ErrCodeProtocol)
+	}
+
+	if len(f.PseudoFields()) > 0 {
+		return streamError(st.id, ErrCodeProtocol)
+	}
+	if st.trailer != nil {
+		for _, hf := range f.RegularFields() {
+			key := sc.canonicalHeader(hf.Name)
+			if !ValidTrailerHeader(key) {
+				// TODO: send more details to the peer somehow. But http2 has
+				// no way to send debug data at a stream level. Discuss with
+				// HTTP folk.
+				return streamError(st.id, ErrCodeProtocol)
+			}
+			st.trailer[key] = append(st.trailer[key], hf.Value)
+		}
+	}
+	st.endStream()
+	return nil
+}
+
+func checkPriority(streamID uint32, p PriorityParam) error {
+	if streamID == p.StreamDep {
+		// Section 5.3.1: "A stream cannot depend on itself. An endpoint MUST treat
+		// this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR."
+		// Section 5.3.3 says that a stream can depend on one of its dependencies,
+		// so it's only self-dependencies that are forbidden.
+		return streamError(streamID, ErrCodeProtocol)
+	}
+	return nil
+}
+
+func (sc *serverConn) processPriority(f *PriorityFrame) error {
+	if sc.inGoAway {
+		return nil
+	}
+	if err := checkPriority(f.StreamID, f.PriorityParam); err != nil {
+		return err
+	}
+	sc.writeSched.AdjustStream(f.StreamID, f.PriorityParam)
+	return nil
+}
+
+func (sc *serverConn) newStream(id, pusherID uint32, state streamState) *stream {
+	sc.serveG.check()
+	if id == 0 {
+		panic("internal error: cannot create stream with id 0")
+	}
+
+	ctx, cancelCtx := contextWithCancel(sc.baseCtx)
+	st := &stream{
+		sc:        sc,
+		id:        id,
+		state:     state,
+		ctx:       ctx,
+		cancelCtx: cancelCtx,
+	}
+	st.cw.Init()
+	st.flow.conn = &sc.flow // link to conn-level counter
+	st.flow.add(sc.initialStreamSendWindowSize)
+	st.inflow.conn = &sc.inflow // link to conn-level counter
+	st.inflow.add(sc.srv.initialStreamRecvWindowSize())
+	if sc.hs.WriteTimeout != 0 {
+		st.writeDeadline = time.AfterFunc(sc.hs.WriteTimeout, st.onWriteTimeout)
+	}
+
+	sc.streams[id] = st
+	sc.writeSched.OpenStream(st.id, OpenStreamOptions{PusherID: pusherID})
+	if st.isPushed() {
+		sc.curPushedStreams++
+	} else {
+		sc.curClientStreams++
+	}
+	if sc.curOpenStreams() == 1 {
+		sc.setConnState(http.StateActive)
+	}
+
+	return st
+}
+
+func (sc *serverConn) newWriterAndRequest(st *stream, f *MetaHeadersFrame) (*responseWriter, *http.Request, error) {
+	sc.serveG.check()
+
+	rp := requestParam{
+		method:    f.PseudoValue("method"),
+		scheme:    f.PseudoValue("scheme"),
+		authority: f.PseudoValue("authority"),
+		path:      f.PseudoValue("path"),
+	}
+
+	isConnect := rp.method == "CONNECT"
+	if isConnect {
+		if rp.path != "" || rp.scheme != "" || rp.authority == "" {
+			return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+		}
+	} else if rp.method == "" || rp.path == "" || (rp.scheme != "https" && rp.scheme != "http") {
+		// See 8.1.2.6 Malformed Requests and Responses:
+		//
+		// Malformed requests or responses that are detected
+		// MUST be treated as a stream error (Section 5.4.2)
+		// of type PROTOCOL_ERROR."
+		//
+		// 8.1.2.3 Request Pseudo-Header Fields
+		// "All HTTP/2 requests MUST include exactly one valid
+		// value for the :method, :scheme, and :path
+		// pseudo-header fields"
+		return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+	}
+
+	bodyOpen := !f.StreamEnded()
+	if rp.method == "HEAD" && bodyOpen {
+		// HEAD requests can't have bodies
+		return nil, nil, streamError(f.StreamID, ErrCodeProtocol)
+	}
+
+	rp.header = make(http.Header)
+	for _, hf := range f.RegularFields() {
+		rp.header.Add(sc.canonicalHeader(hf.Name), hf.Value)
+	}
+	if rp.authority == "" {
+		rp.authority = rp.header.Get("Host")
+	}
+
+	rw, req, err := sc.newWriterAndRequestNoBody(st, rp)
+	if err != nil {
+		return nil, nil, err
+	}
+	if bodyOpen {
+		if vv, ok := rp.header["Content-Length"]; ok {
+			req.ContentLength, _ = strconv.ParseInt(vv[0], 10, 64)
+		} else {
+			req.ContentLength = -1
+		}
+		req.Body.(*requestBody).pipe = &pipe{
+			b: &dataBuffer{expected: req.ContentLength},
+		}
+	}
+	return rw, req, nil
+}
+
+type requestParam struct {
+	method                  string
+	scheme, authority, path string
+	header                  http.Header
+}
+
+func (sc *serverConn) newWriterAndRequestNoBody(st *stream, rp requestParam) (*responseWriter, *http.Request, error) {
+	sc.serveG.check()
+
+	var tlsState *tls.ConnectionState // nil if not scheme https
+	if rp.scheme == "https" {
+		tlsState = sc.tlsState
+	}
+
+	needsContinue := rp.header.Get("Expect") == "100-continue"
+	if needsContinue {
+		rp.header.Del("Expect")
+	}
+	// Merge Cookie headers into one "; "-delimited value.
+	if cookies := rp.header["Cookie"]; len(cookies) > 1 {
+		rp.header.Set("Cookie", strings.Join(cookies, "; "))
+	}
+
+	// Setup Trailers
+	var trailer http.Header
+	for _, v := range rp.header["Trailer"] {
+		for _, key := range strings.Split(v, ",") {
+			key = http.CanonicalHeaderKey(strings.TrimSpace(key))
+			switch key {
+			case "Transfer-Encoding", "Trailer", "Content-Length":
+				// Bogus. (copy of http1 rules)
+				// Ignore.
+			default:
+				if trailer == nil {
+					trailer = make(http.Header)
+				}
+				trailer[key] = nil
+			}
+		}
+	}
+	delete(rp.header, "Trailer")
+
+	var url_ *url.URL
+	var requestURI string
+	if rp.method == "CONNECT" {
+		url_ = &url.URL{Host: rp.authority}
+		requestURI = rp.authority // mimic HTTP/1 server behavior
+	} else {
+		var err error
+		url_, err = url.ParseRequestURI(rp.path)
+		if err != nil {
+			return nil, nil, streamError(st.id, ErrCodeProtocol)
+		}
+		requestURI = rp.path
+	}
+
+	body := &requestBody{
+		conn:          sc,
+		stream:        st,
+		needsContinue: needsContinue,
+	}
+	req := &http.Request{
+		Method:     rp.method,
+		URL:        url_,
+		RemoteAddr: sc.remoteAddrStr,
+		Header:     rp.header,
+		RequestURI: requestURI,
+		Proto:      "HTTP/2.0",
+		ProtoMajor: 2,
+		ProtoMinor: 0,
+		TLS:        tlsState,
+		Host:       rp.authority,
+		Body:       body,
+		Trailer:    trailer,
+	}
+	req = requestWithContext(req, st.ctx)
+
+	rws := responseWriterStatePool.Get().(*responseWriterState)
+	bwSave := rws.bw
+	*rws = responseWriterState{} // zero all the fields
+	rws.conn = sc
+	rws.bw = bwSave
+	rws.bw.Reset(chunkWriter{rws})
+	rws.stream = st
+	rws.req = req
+	rws.body = body
+
+	rw := &responseWriter{rws: rws}
+	return rw, req, nil
+}
+
+// Run on its own goroutine.
+func (sc *serverConn) runHandler(rw *responseWriter, req *http.Request, handler func(http.ResponseWriter, *http.Request)) {
+	didPanic := true
+	defer func() {
+		rw.rws.stream.cancelCtx()
+		if didPanic {
+			e := recover()
+			sc.writeFrameFromHandler(FrameWriteRequest{
+				write:  handlerPanicRST{rw.rws.stream.id},
+				stream: rw.rws.stream,
+			})
+			// Same as net/http:
+			if shouldLogPanic(e) {
+				const size = 64 << 10
+				buf := make([]byte, size)
+				buf = buf[:runtime.Stack(buf, false)]
+				sc.logf("http2: panic serving %v: %v\n%s", sc.conn.RemoteAddr(), e, buf)
+			}
+			return
+		}
+		rw.handlerDone()
+	}()
+	handler(rw, req)
+	didPanic = false
+}
+
+func handleHeaderListTooLong(w http.ResponseWriter, r *http.Request) {
+	// 10.5.1 Limits on Header Block Size:
+	// .. "A server that receives a larger header block than it is
+	// willing to handle can send an HTTP 431 (Request Header Fields Too
+	// Large) status code"
+	const statusRequestHeaderFieldsTooLarge = 431 // only in Go 1.6+
+	w.WriteHeader(statusRequestHeaderFieldsTooLarge)
+	io.WriteString(w, "<h1>HTTP Error 431</h1><p>Request Header Field(s) Too Large</p>")
+}
+
+// called from handler goroutines.
+// h may be nil.
+func (sc *serverConn) writeHeaders(st *stream, headerData *writeResHeaders) error {
+	sc.serveG.checkNotOn() // NOT on
+	var errc chan error
+	if headerData.h != nil {
+		// If there's a header map (which we don't own), so we have to block on
+		// waiting for this frame to be written, so an http.Flush mid-handler
+		// writes out the correct value of keys, before a handler later potentially
+		// mutates it.
+		errc = errChanPool.Get().(chan error)
+	}
+	if err := sc.writeFrameFromHandler(FrameWriteRequest{
+		write:  headerData,
+		stream: st,
+		done:   errc,
+	}); err != nil {
+		return err
+	}
+	if errc != nil {
+		select {
+		case err := <-errc:
+			errChanPool.Put(errc)
+			return err
+		case <-sc.doneServing:
+			return errClientDisconnected
+		case <-st.cw:
+			return errStreamClosed
+		}
+	}
+	return nil
+}
+
+// called from handler goroutines.
+func (sc *serverConn) write100ContinueHeaders(st *stream) {
+	sc.writeFrameFromHandler(FrameWriteRequest{
+		write:  write100ContinueHeadersFrame{st.id},
+		stream: st,
+	})
+}
+
+// A bodyReadMsg tells the server loop that the http.Handler read n
+// bytes of the DATA from the client on the given stream.
+type bodyReadMsg struct {
+	st *stream
+	n  int
+}
+
+// called from handler goroutines.
+// Notes that the handler for the given stream ID read n bytes of its body
+// and schedules flow control tokens to be sent.
+func (sc *serverConn) noteBodyReadFromHandler(st *stream, n int, err error) {
+	sc.serveG.checkNotOn() // NOT on
+	if n > 0 {
+		select {
+		case sc.bodyReadCh <- bodyReadMsg{st, n}:
+		case <-sc.doneServing:
+		}
+	}
+}
+
+func (sc *serverConn) noteBodyRead(st *stream, n int) {
+	sc.serveG.check()
+	sc.sendWindowUpdate(nil, n) // conn-level
+	if st.state != stateHalfClosedRemote && st.state != stateClosed {
+		// Don't send this WINDOW_UPDATE if the stream is closed
+		// remotely.
+		sc.sendWindowUpdate(st, n)
+	}
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate(st *stream, n int) {
+	sc.serveG.check()
+	// "The legal range for the increment to the flow control
+	// window is 1 to 2^31-1 (2,147,483,647) octets."
+	// A Go Read call on 64-bit machines could in theory read
+	// a larger Read than this. Very unlikely, but we handle it here
+	// rather than elsewhere for now.
+	const maxUint31 = 1<<31 - 1
+	for n >= maxUint31 {
+		sc.sendWindowUpdate32(st, maxUint31)
+		n -= maxUint31
+	}
+	sc.sendWindowUpdate32(st, int32(n))
+}
+
+// st may be nil for conn-level
+func (sc *serverConn) sendWindowUpdate32(st *stream, n int32) {
+	sc.serveG.check()
+	if n == 0 {
+		return
+	}
+	if n < 0 {
+		panic("negative update")
+	}
+	var streamID uint32
+	if st != nil {
+		streamID = st.id
+	}
+	sc.writeFrame(FrameWriteRequest{
+		write:  writeWindowUpdate{streamID: streamID, n: uint32(n)},
+		stream: st,
+	})
+	var ok bool
+	if st == nil {
+		ok = sc.inflow.add(n)
+	} else {
+		ok = st.inflow.add(n)
+	}
+	if !ok {
+		panic("internal error; sent too many window updates without decrements?")
+	}
+}
+
+// requestBody is the Handler's Request.Body type.
+// Read and Close may be called concurrently.
+type requestBody struct {
+	stream        *stream
+	conn          *serverConn
+	closed        bool  // for use by Close only
+	sawEOF        bool  // for use by Read only
+	pipe          *pipe // non-nil if we have a HTTP entity message body
+	needsContinue bool  // need to send a 100-continue
+}
+
+func (b *requestBody) Close() error {
+	if b.pipe != nil && !b.closed {
+		b.pipe.BreakWithError(errClosedBody)
+	}
+	b.closed = true
+	return nil
+}
+
+func (b *requestBody) Read(p []byte) (n int, err error) {
+	if b.needsContinue {
+		b.needsContinue = false
+		b.conn.write100ContinueHeaders(b.stream)
+	}
+	if b.pipe == nil || b.sawEOF {
+		return 0, io.EOF
+	}
+	n, err = b.pipe.Read(p)
+	if err == io.EOF {
+		b.sawEOF = true
+	}
+	if b.conn == nil && inTests {
+		return
+	}
+	b.conn.noteBodyReadFromHandler(b.stream, n, err)
+	return
+}
+
+// responseWriter is the http.ResponseWriter implementation. It's
+// intentionally small (1 pointer wide) to minimize garbage. The
+// responseWriterState pointer inside is zeroed at the end of a
+// request (in handlerDone) and calls on the responseWriter thereafter
+// simply crash (caller's mistake), but the much larger responseWriterState
+// and buffers are reused between multiple requests.
+type responseWriter struct {
+	rws *responseWriterState
+}
+
+// Optional http.ResponseWriter interfaces implemented.
+var (
+	_ http.CloseNotifier = (*responseWriter)(nil)
+	_ http.Flusher       = (*responseWriter)(nil)
+	_ stringWriter       = (*responseWriter)(nil)
+)
+
+type responseWriterState struct {
+	// immutable within a request:
+	stream *stream
+	req    *http.Request
+	body   *requestBody // to close at end of request, if DATA frames didn't
+	conn   *serverConn
+
+	// TODO: adjust buffer writing sizes based on server config, frame size updates from peer, etc
+	bw *bufio.Writer // writing to a chunkWriter{this *responseWriterState}
+
+	// mutated by http.Handler goroutine:
+	handlerHeader http.Header // nil until called
+	snapHeader    http.Header // snapshot of handlerHeader at WriteHeader time
+	trailers      []string    // set in writeChunk
+	status        int         // status code passed to WriteHeader
+	wroteHeader   bool        // WriteHeader called (explicitly or implicitly). Not necessarily sent to user yet.
+	sentHeader    bool        // have we sent the header frame?
+	handlerDone   bool        // handler has finished
+	dirty         bool        // a Write failed; don't reuse this responseWriterState
+
+	sentContentLen int64 // non-zero if handler set a Content-Length header
+	wroteBytes     int64
+
+	closeNotifierMu sync.Mutex // guards closeNotifierCh
+	closeNotifierCh chan bool  // nil until first used
+}
+
+type chunkWriter struct{ rws *responseWriterState }
+
+func (cw chunkWriter) Write(p []byte) (n int, err error) { return cw.rws.writeChunk(p) }
+
+func (rws *responseWriterState) hasTrailers() bool { return len(rws.trailers) != 0 }
+
+// declareTrailer is called for each Trailer header when the
+// response header is written. It notes that a header will need to be
+// written in the trailers at the end of the response.
+func (rws *responseWriterState) declareTrailer(k string) {
+	k = http.CanonicalHeaderKey(k)
+	if !ValidTrailerHeader(k) {
+		// Forbidden by RFC 2616 14.40.
+		rws.conn.logf("ignoring invalid trailer %q", k)
+		return
+	}
+	if !strSliceContains(rws.trailers, k) {
+		rws.trailers = append(rws.trailers, k)
+	}
+}
+
+// writeChunk writes chunks from the bufio.Writer. But because
+// bufio.Writer may bypass its chunking, sometimes p may be
+// arbitrarily large.
+//
+// writeChunk is also responsible (on the first chunk) for sending the
+// HEADER response.
+func (rws *responseWriterState) writeChunk(p []byte) (n int, err error) {
+	if !rws.wroteHeader {
+		rws.writeHeader(200)
+	}
+
+	isHeadResp := rws.req.Method == "HEAD"
+	if !rws.sentHeader {
+		rws.sentHeader = true
+		var ctype, clen string
+		if clen = rws.snapHeader.Get("Content-Length"); clen != "" {
+			rws.snapHeader.Del("Content-Length")
+			clen64, err := strconv.ParseInt(clen, 10, 64)
+			if err == nil && clen64 >= 0 {
+				rws.sentContentLen = clen64
+			} else {
+				clen = ""
+			}
+		}
+		if clen == "" && rws.handlerDone && bodyAllowedForStatus(rws.status) && (len(p) > 0 || !isHeadResp) {
+			clen = strconv.Itoa(len(p))
+		}
+		_, hasContentType := rws.snapHeader["Content-Type"]
+		if !hasContentType && bodyAllowedForStatus(rws.status) {
+			ctype = http.DetectContentType(p)
+		}
+		var date string
+		if _, ok := rws.snapHeader["Date"]; !ok {
+			// TODO(bradfitz): be faster here, like net/http? measure.
+			date = time.Now().UTC().Format(http.TimeFormat)
+		}
+
+		for _, v := range rws.snapHeader["Trailer"] {
+			foreachHeaderElement(v, rws.declareTrailer)
+		}
+
+		endStream := (rws.handlerDone && !rws.hasTrailers() && len(p) == 0) || isHeadResp
+		err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+			streamID:      rws.stream.id,
+			httpResCode:   rws.status,
+			h:             rws.snapHeader,
+			endStream:     endStream,
+			contentType:   ctype,
+			contentLength: clen,
+			date:          date,
+		})
+		if err != nil {
+			rws.dirty = true
+			return 0, err
+		}
+		if endStream {
+			return 0, nil
+		}
+	}
+	if isHeadResp {
+		return len(p), nil
+	}
+	if len(p) == 0 && !rws.handlerDone {
+		return 0, nil
+	}
+
+	if rws.handlerDone {
+		rws.promoteUndeclaredTrailers()
+	}
+
+	endStream := rws.handlerDone && !rws.hasTrailers()
+	if len(p) > 0 || endStream {
+		// only send a 0 byte DATA frame if we're ending the stream.
+		if err := rws.conn.writeDataFromHandler(rws.stream, p, endStream); err != nil {
+			rws.dirty = true
+			return 0, err
+		}
+	}
+
+	if rws.handlerDone && rws.hasTrailers() {
+		err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{
+			streamID:  rws.stream.id,
+			h:         rws.handlerHeader,
+			trailers:  rws.trailers,
+			endStream: true,
+		})
+		if err != nil {
+			rws.dirty = true
+		}
+		return len(p), err
+	}
+	return len(p), nil
+}
+
+// TrailerPrefix is a magic prefix for ResponseWriter.Header map keys
+// that, if present, signals that the map entry is actually for
+// the response trailers, and not the response headers. The prefix
+// is stripped after the ServeHTTP call finishes and the values are
+// sent in the trailers.
+//
+// This mechanism is intended only for trailers that are not known
+// prior to the headers being written. If the set of trailers is fixed
+// or known before the header is written, the normal Go trailers mechanism
+// is preferred:
+//    https://golang.org/pkg/net/http/#ResponseWriter
+//    https://golang.org/pkg/net/http/#example_ResponseWriter_trailers
+const TrailerPrefix = "Trailer:"
+
+// promoteUndeclaredTrailers permits http.Handlers to set trailers
+// after the header has already been flushed. Because the Go
+// ResponseWriter interface has no way to set Trailers (only the
+// Header), and because we didn't want to expand the ResponseWriter
+// interface, and because nobody used trailers, and because RFC 2616
+// says you SHOULD (but not must) predeclare any trailers in the
+// header, the official ResponseWriter rules said trailers in Go must
+// be predeclared, and then we reuse the same ResponseWriter.Header()
+// map to mean both Headers and Trailers. When it's time to write the
+// Trailers, we pick out the fields of Headers that were declared as
+// trailers. That worked for a while, until we found the first major
+// user of Trailers in the wild: gRPC (using them only over http2),
+// and gRPC libraries permit setting trailers mid-stream without
+// predeclarnig them. So: change of plans. We still permit the old
+// way, but we also permit this hack: if a Header() key begins with
+// "Trailer:", the suffix of that key is a Trailer. Because ':' is an
+// invalid token byte anyway, there is no ambiguity. (And it's already
+// filtered out) It's mildly hacky, but not terrible.
+//
+// This method runs after the Handler is done and promotes any Header
+// fields to be trailers.
+func (rws *responseWriterState) promoteUndeclaredTrailers() {
+	for k, vv := range rws.handlerHeader {
+		if !strings.HasPrefix(k, TrailerPrefix) {
+			continue
+		}
+		trailerKey := strings.TrimPrefix(k, TrailerPrefix)
+		rws.declareTrailer(trailerKey)
+		rws.handlerHeader[http.CanonicalHeaderKey(trailerKey)] = vv
+	}
+
+	if len(rws.trailers) > 1 {
+		sorter := sorterPool.Get().(*sorter)
+		sorter.SortStrings(rws.trailers)
+		sorterPool.Put(sorter)
+	}
+}
+
+func (w *responseWriter) Flush() {
+	rws := w.rws
+	if rws == nil {
+		panic("Header called after Handler finished")
+	}
+	if rws.bw.Buffered() > 0 {
+		if err := rws.bw.Flush(); err != nil {
+			// Ignore the error. The frame writer already knows.
+			return
+		}
+	} else {
+		// The bufio.Writer won't call chunkWriter.Write
+		// (writeChunk with zero bytes, so we have to do it
+		// ourselves to force the HTTP response header and/or
+		// final DATA frame (with END_STREAM) to be sent.
+		rws.writeChunk(nil)
+	}
+}
+
+func (w *responseWriter) CloseNotify() <-chan bool {
+	rws := w.rws
+	if rws == nil {
+		panic("CloseNotify called after Handler finished")
+	}
+	rws.closeNotifierMu.Lock()
+	ch := rws.closeNotifierCh
+	if ch == nil {
+		ch = make(chan bool, 1)
+		rws.closeNotifierCh = ch
+		cw := rws.stream.cw
+		go func() {
+			cw.Wait() // wait for close
+			ch <- true
+		}()
+	}
+	rws.closeNotifierMu.Unlock()
+	return ch
+}
+
+func (w *responseWriter) Header() http.Header {
+	rws := w.rws
+	if rws == nil {
+		panic("Header called after Handler finished")
+	}
+	if rws.handlerHeader == nil {
+		rws.handlerHeader = make(http.Header)
+	}
+	return rws.handlerHeader
+}
+
+func (w *responseWriter) WriteHeader(code int) {
+	rws := w.rws
+	if rws == nil {
+		panic("WriteHeader called after Handler finished")
+	}
+	rws.writeHeader(code)
+}
+
+func (rws *responseWriterState) writeHeader(code int) {
+	if !rws.wroteHeader {
+		rws.wroteHeader = true
+		rws.status = code
+		if len(rws.handlerHeader) > 0 {
+			rws.snapHeader = cloneHeader(rws.handlerHeader)
+		}
+	}
+}
+
+func cloneHeader(h http.Header) http.Header {
+	h2 := make(http.Header, len(h))
+	for k, vv := range h {
+		vv2 := make([]string, len(vv))
+		copy(vv2, vv)
+		h2[k] = vv2
+	}
+	return h2
+}
+
+// The Life Of A Write is like this:
+//
+// * Handler calls w.Write or w.WriteString ->
+// * -> rws.bw (*bufio.Writer) ->
+// * (Handler might call Flush)
+// * -> chunkWriter{rws}
+// * -> responseWriterState.writeChunk(p []byte)
+// * -> responseWriterState.writeChunk (most of the magic; see comment there)
+func (w *responseWriter) Write(p []byte) (n int, err error) {
+	return w.write(len(p), p, "")
+}
+
+func (w *responseWriter) WriteString(s string) (n int, err error) {
+	return w.write(len(s), nil, s)
+}
+
+// either dataB or dataS is non-zero.
+func (w *responseWriter) write(lenData int, dataB []byte, dataS string) (n int, err error) {
+	rws := w.rws
+	if rws == nil {
+		panic("Write called after Handler finished")
+	}
+	if !rws.wroteHeader {
+		w.WriteHeader(200)
+	}
+	if !bodyAllowedForStatus(rws.status) {
+		return 0, http.ErrBodyNotAllowed
+	}
+	rws.wroteBytes += int64(len(dataB)) + int64(len(dataS)) // only one can be set
+	if rws.sentContentLen != 0 && rws.wroteBytes > rws.sentContentLen {
+		// TODO: send a RST_STREAM
+		return 0, errors.New("http2: handler wrote more than declared Content-Length")
+	}
+
+	if dataB != nil {
+		return rws.bw.Write(dataB)
+	} else {
+		return rws.bw.WriteString(dataS)
+	}
+}
+
+func (w *responseWriter) handlerDone() {
+	rws := w.rws
+	dirty := rws.dirty
+	rws.handlerDone = true
+	w.Flush()
+	w.rws = nil
+	if !dirty {
+		// Only recycle the pool if all prior Write calls to
+		// the serverConn goroutine completed successfully. If
+		// they returned earlier due to resets from the peer
+		// there might still be write goroutines outstanding
+		// from the serverConn referencing the rws memory. See
+		// issue 20704.
+		responseWriterStatePool.Put(rws)
+	}
+}
+
+// Push errors.
+var (
+	ErrRecursivePush    = errors.New("http2: recursive push not allowed")
+	ErrPushLimitReached = errors.New("http2: push would exceed peer's SETTINGS_MAX_CONCURRENT_STREAMS")
+)
+
+// pushOptions is the internal version of http.PushOptions, which we
+// cannot include here because it's only defined in Go 1.8 and later.
+type pushOptions struct {
+	Method string
+	Header http.Header
+}
+
+func (w *responseWriter) push(target string, opts pushOptions) error {
+	st := w.rws.stream
+	sc := st.sc
+	sc.serveG.checkNotOn()
+
+	// No recursive pushes: "PUSH_PROMISE frames MUST only be sent on a peer-initiated stream."
+	// http://tools.ietf.org/html/rfc7540#section-6.6
+	if st.isPushed() {
+		return ErrRecursivePush
+	}
+
+	// Default options.
+	if opts.Method == "" {
+		opts.Method = "GET"
+	}
+	if opts.Header == nil {
+		opts.Header = http.Header{}
+	}
+	wantScheme := "http"
+	if w.rws.req.TLS != nil {
+		wantScheme = "https"
+	}
+
+	// Validate the request.
+	u, err := url.Parse(target)
+	if err != nil {
+		return err
+	}
+	if u.Scheme == "" {
+		if !strings.HasPrefix(target, "/") {
+			return fmt.Errorf("target must be an absolute URL or an absolute path: %q", target)
+		}
+		u.Scheme = wantScheme
+		u.Host = w.rws.req.Host
+	} else {
+		if u.Scheme != wantScheme {
+			return fmt.Errorf("cannot push URL with scheme %q from request with scheme %q", u.Scheme, wantScheme)
+		}
+		if u.Host == "" {
+			return errors.New("URL must have a host")
+		}
+	}
+	for k := range opts.Header {
+		if strings.HasPrefix(k, ":") {
+			return fmt.Errorf("promised request headers cannot include pseudo header %q", k)
+		}
+		// These headers are meaningful only if the request has a body,
+		// but PUSH_PROMISE requests cannot have a body.
+		// http://tools.ietf.org/html/rfc7540#section-8.2
+		// Also disallow Host, since the promised URL must be absolute.
+		switch strings.ToLower(k) {
+		case "content-length", "content-encoding", "trailer", "te", "expect", "host":
+			return fmt.Errorf("promised request headers cannot include %q", k)
+		}
+	}
+	if err := checkValidHTTP2RequestHeaders(opts.Header); err != nil {
+		return err
+	}
+
+	// The RFC effectively limits promised requests to GET and HEAD:
+	// "Promised requests MUST be cacheable [GET, HEAD, or POST], and MUST be safe [GET or HEAD]"
+	// http://tools.ietf.org/html/rfc7540#section-8.2
+	if opts.Method != "GET" && opts.Method != "HEAD" {
+		return fmt.Errorf("method %q must be GET or HEAD", opts.Method)
+	}
+
+	msg := &startPushRequest{
+		parent: st,
+		method: opts.Method,
+		url:    u,
+		header: cloneHeader(opts.Header),
+		done:   errChanPool.Get().(chan error),
+	}
+
+	select {
+	case <-sc.doneServing:
+		return errClientDisconnected
+	case <-st.cw:
+		return errStreamClosed
+	case sc.serveMsgCh <- msg:
+	}
+
+	select {
+	case <-sc.doneServing:
+		return errClientDisconnected
+	case <-st.cw:
+		return errStreamClosed
+	case err := <-msg.done:
+		errChanPool.Put(msg.done)
+		return err
+	}
+}
+
+type startPushRequest struct {
+	parent *stream
+	method string
+	url    *url.URL
+	header http.Header
+	done   chan error
+}
+
+func (sc *serverConn) startPush(msg *startPushRequest) {
+	sc.serveG.check()
+
+	// http://tools.ietf.org/html/rfc7540#section-6.6.
+	// PUSH_PROMISE frames MUST only be sent on a peer-initiated stream that
+	// is in either the "open" or "half-closed (remote)" state.
+	if msg.parent.state != stateOpen && msg.parent.state != stateHalfClosedRemote {
+		// responseWriter.Push checks that the stream is peer-initiaed.
+		msg.done <- errStreamClosed
+		return
+	}
+
+	// http://tools.ietf.org/html/rfc7540#section-6.6.
+	if !sc.pushEnabled {
+		msg.done <- http.ErrNotSupported
+		return
+	}
+
+	// PUSH_PROMISE frames must be sent in increasing order by stream ID, so
+	// we allocate an ID for the promised stream lazily, when the PUSH_PROMISE
+	// is written. Once the ID is allocated, we start the request handler.
+	allocatePromisedID := func() (uint32, error) {
+		sc.serveG.check()
+
+		// Check this again, just in case. Technically, we might have received
+		// an updated SETTINGS by the time we got around to writing this frame.
+		if !sc.pushEnabled {
+			return 0, http.ErrNotSupported
+		}
+		// http://tools.ietf.org/html/rfc7540#section-6.5.2.
+		if sc.curPushedStreams+1 > sc.clientMaxStreams {
+			return 0, ErrPushLimitReached
+		}
+
+		// http://tools.ietf.org/html/rfc7540#section-5.1.1.
+		// Streams initiated by the server MUST use even-numbered identifiers.
+		// A server that is unable to establish a new stream identifier can send a GOAWAY
+		// frame so that the client is forced to open a new connection for new streams.
+		if sc.maxPushPromiseID+2 >= 1<<31 {
+			sc.startGracefulShutdownInternal()
+			return 0, ErrPushLimitReached
+		}
+		sc.maxPushPromiseID += 2
+		promisedID := sc.maxPushPromiseID
+
+		// http://tools.ietf.org/html/rfc7540#section-8.2.
+		// Strictly speaking, the new stream should start in "reserved (local)", then
+		// transition to "half closed (remote)" after sending the initial HEADERS, but
+		// we start in "half closed (remote)" for simplicity.
+		// See further comments at the definition of stateHalfClosedRemote.
+		promised := sc.newStream(promisedID, msg.parent.id, stateHalfClosedRemote)
+		rw, req, err := sc.newWriterAndRequestNoBody(promised, requestParam{
+			method:    msg.method,
+			scheme:    msg.url.Scheme,
+			authority: msg.url.Host,
+			path:      msg.url.RequestURI(),
+			header:    cloneHeader(msg.header), // clone since handler runs concurrently with writing the PUSH_PROMISE
+		})
+		if err != nil {
+			// Should not happen, since we've already validated msg.url.
+			panic(fmt.Sprintf("newWriterAndRequestNoBody(%+v): %v", msg.url, err))
+		}
+
+		go sc.runHandler(rw, req, sc.handler.ServeHTTP)
+		return promisedID, nil
+	}
+
+	sc.writeFrame(FrameWriteRequest{
+		write: &writePushPromise{
+			streamID:           msg.parent.id,
+			method:             msg.method,
+			url:                msg.url,
+			h:                  msg.header,
+			allocatePromisedID: allocatePromisedID,
+		},
+		stream: msg.parent,
+		done:   msg.done,
+	})
+}
+
+// foreachHeaderElement splits v according to the "#rule" construction
+// in RFC 2616 section 2.1 and calls fn for each non-empty element.
+func foreachHeaderElement(v string, fn func(string)) {
+	v = textproto.TrimString(v)
+	if v == "" {
+		return
+	}
+	if !strings.Contains(v, ",") {
+		fn(v)
+		return
+	}
+	for _, f := range strings.Split(v, ",") {
+		if f = textproto.TrimString(f); f != "" {
+			fn(f)
+		}
+	}
+}
+
+// From http://httpwg.org/specs/rfc7540.html#rfc.section.8.1.2.2
+var connHeaders = []string{
+	"Connection",
+	"Keep-Alive",
+	"Proxy-Connection",
+	"Transfer-Encoding",
+	"Upgrade",
+}
+
+// checkValidHTTP2RequestHeaders checks whether h is a valid HTTP/2 request,
+// per RFC 7540 Section 8.1.2.2.
+// The returned error is reported to users.
+func checkValidHTTP2RequestHeaders(h http.Header) error {
+	for _, k := range connHeaders {
+		if _, ok := h[k]; ok {
+			return fmt.Errorf("request header %q is not valid in HTTP/2", k)
+		}
+	}
+	te := h["Te"]
+	if len(te) > 0 && (len(te) > 1 || (te[0] != "trailers" && te[0] != "")) {
+		return errors.New(`request header "TE" may only be "trailers" in HTTP/2`)
+	}
+	return nil
+}
+
+func new400Handler(err error) http.HandlerFunc {
+	return func(w http.ResponseWriter, r *http.Request) {
+		http.Error(w, err.Error(), http.StatusBadRequest)
+	}
+}
+
+// ValidTrailerHeader reports whether name is a valid header field name to appear
+// in trailers.
+// See: http://tools.ietf.org/html/rfc7230#section-4.1.2
+func ValidTrailerHeader(name string) bool {
+	name = http.CanonicalHeaderKey(name)
+	if strings.HasPrefix(name, "If-") || badTrailer[name] {
+		return false
+	}
+	return true
+}
+
+var badTrailer = map[string]bool{
+	"Authorization":       true,
+	"Cache-Control":       true,
+	"Connection":          true,
+	"Content-Encoding":    true,
+	"Content-Length":      true,
+	"Content-Range":       true,
+	"Content-Type":        true,
+	"Expect":              true,
+	"Host":                true,
+	"Keep-Alive":          true,
+	"Max-Forwards":        true,
+	"Pragma":              true,
+	"Proxy-Authenticate":  true,
+	"Proxy-Authorization": true,
+	"Proxy-Connection":    true,
+	"Range":               true,
+	"Realm":               true,
+	"Te":                  true,
+	"Trailer":             true,
+	"Transfer-Encoding":   true,
+	"Www-Authenticate":    true,
+}
+
+// h1ServerKeepAlivesDisabled reports whether hs has its keep-alives
+// disabled. See comments on h1ServerShutdownChan above for why
+// the code is written this way.
+func h1ServerKeepAlivesDisabled(hs *http.Server) bool {
+	var x interface{} = hs
+	type I interface {
+		doKeepAlives() bool
+	}
+	if hs, ok := x.(I); ok {
+		return !hs.doKeepAlives()
+	}
+	return false
+}