Observe that ONOS has identified the OLT device and displays the correct number of ONU ports
First, start the onos container.
docker-compose -f compose/docker-compose-auth-test.yml up -d onos
this should output
Creating compose_onos_1
Note: You may see a docker compose warning that states the following. This warning can be ignored.
WARNING: Found orphan containers (compose_shovel_1, compose_registrator_1, compose_kafka_1, ...)
Make sure that ONOS is running
docker-compose -f compose/docker-compose-auth-test.yml ps
which shows
Name Command State Ports ------------------------------------------------------------------------------------------------------------------------------ compose_onos_1 ./bin/onos-service Up 0.0.0.0:6653->6653/tcp, 0.0.0.0:8101->8101/tcp, 0.0.0.0:8181->8181/tcp, 9876/tcp
Now, let's login to ONOS.
sudo apt install sshpass # may not be necessary sshpass -p karaf ssh -o StrictHostKeyChecking=no -p 8101 karaf@localhost
this should land you at the ONOS prompt
Welcome to Open Network Operating System (ONOS)!
____ _ ______ ____
/ __ \/ |/ / __ \/ __/
/ /_/ / / /_/ /\ \
\____/_/|_/\____/___/
Documentation: wiki.onosproject.org
Tutorials: tutorials.onosproject.org
Mailing lists: lists.onosproject.org
Come help out! Find out how at: contribute.onosproject.org
Hit '<tab>' for a list of available commands
and '[cmd] --help' for help on a specific command.
Hit '<ctrl-d>' or type 'system:shutdown' or 'logout' to shutdown ONOS.
onos>
Let's have a look at the devices that ONOS sees, to do this enter the following at the ONOS prompt.
devices
this will output the following
id=of:0000000000000001, available=true, role=MASTER, type=SWITCH, mfr=cord porject, hw=simualted pon, sw=simualted pon, serial=46da01fd646d4bb08140fc09b1bc4926, driver=voltha, channelId=172.25.0.1:35866, managementAddress=172.25.0.1, name=of:0000000000000001, protocol=OF_13
next let's have a look at the ports that onos sees. Remember that ONOS sees the PON system as a logical device so ONU are represented as ports to ONOS. So let's see the ports in ONOS.
ports
which returns the following
id=of:0000000000000001, available=true, role=MASTER, type=SWITCH, mfr=cord porject, hw=simualted pon, sw=simualted pon, serial=46da01fd646d4bb08140fc09b1bc4926, driver=voltha, channelId=172.25.0.1:35866, managementAddress=172.25.0.1, name=of:0000000000000001, protocol=OF_13 port=0, state=enabled, type=fiber, speed=0 , portName=nni, portMac=00:00:00:00:00:00 port=128, state=enabled, type=fiber, speed=0 , portName=uni-128, portMac=00:00:00:00:00:80 port=129, state=enabled, type=fiber, speed=0 , portName=uni-129, portMac=00:00:00:00:00:81 port=130, state=enabled, type=fiber, speed=0 , portName=uni-130, portMac=00:00:00:00:00:82
This correctly shows three ports. Yay!