M24 - Traffic Recovers After Fiber Disconnect (Best Effort)
Test Objective
- Purpose of this test is to verify pull & re-insert of PON cable can resume the traffic on the ONU
Test Configuration
- Test Setup as shown in Section – 7
- Maple OLT and ONU is activated using VOLTHA
- Provision HSIA/unicast service on the OLT and connected ONU from VOLTHA
Test Procedure
- Now manually pull the fiber cable the from ONU
- Re-insert the fiber cable to the ONU and verify ONU is ranges and traffic restores
Pass / Fail Criteria
- Traffic stopped when cable is pulled from ONU
- After cable insert, ONU is ranged back and traffic starts flowing automatically on the ONU