M3 - Verify EAPOL Remote Gateway Authentication

Test Objective

• Purpose of this test is to verify that 802.1X EAPOL messages are forwarded to the ONOS from VOLTHA
  • Correct Maple OLT and ONU PON environment
  • Logical device visible in VOLTHA CLI

Test Configuration

• VOLTHA ensemble running as per deployment instructions.
• Start the freeradius container

docker-compose -f compose/docker-compose-auth-test.yml up -d freeradius

• Maple OLT and ONUs registered as ACTIVE in VOLTHA

Test Procedure

Now that this OLT is ACTIVE in VOLTHA, it should forward EAPOL traffic. We can verify this by starting the RG emulator and observing that EAPOL authentication does not succeed. To do this start our RG docker container.

docker run --net=host --privileged --name RG -it voltha/tester bash

this should land you in a command prompt that looks like

root@8358ef5cad0e:/#

and at this prompt issue the following command

/sbin/wpa_supplicant -Dwired -ien01 -c /etc/wpa_supplicant/wpa_supplicant.conf

This should pass with the following output

Successfully initialized wpa_supplicant
ens9f1: Associated with 01:80:c2:00:00:03
WMM AC: Missing IEs
ens9f1: CTRL-EVENT-EAP-STARTED EAP authentication started
ens9f1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=4
ens9f1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
ens9f1: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully

Pass/Fail Criteria

• EAPOL Authentication should pass