diff --git a/GettingStartedLinux.html b/GettingStartedLinux.html
deleted file mode 100644
index fdce7b8..0000000
--- a/GettingStartedLinux.html
+++ /dev/null
@@ -1,225 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
-	"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-
-<html xmlns="http://www.w3.org/1999/xhtml">
-
-<head>
-<title>GettingStartedLinux.html</title>
-
-</head>
-
-<body>
-
-<h1>Setting up a clean-slate Linux system for VOLTHA development and execution.</h1>
-
-<p>Note: These steps have been tested and confirmed on
- * Ubuntu Desktop 16.04.01 LTS release
- * Ubuntu Server 16.04.01 LTS release.</p>
-
-<p>The purpose of this file is to document the intial packages that need
-to be installed on a Linux system so that you can execute the basic
-installation procedure documented in BUILD.md</p>
-
-<p>The following steps can be executed in order and have been tested (and
-retested) on various Linux VMs. If you find any issues with the steps
-below, please update this file accordingly.</p>
-
-<p>Regarding Linux VMs, I found that I needed to allocate at lest 6GB of
-RAM to my VM, otherwise I would run out of memory while fetching the
-docker images.</p>
-
-<p>October, 2016 - Minimum Linux VM requirements</p>
-
-<p>| Cores | RAM | Disk |
-|-------|-----|------|
-| 2     | 6GB | 20GB |</p>
-
-<h3>Update</h3>
-
-<p>To begin with, please make sure you machine is up to date with the
-latest packages and that you have python-pip installed.</p>
-
-<p><code>
-$ sudo apt update
-$ sudo apt upgrade --yes
-$ sudo apt install python-pip
-$ sudo pip install --upgrade pip
-</code></p>
-
-<h3>Base Packages</h3>
-
-<p>Next, install the following base packages that will be needed to
-successfully install and compile the virtualenv.</p>
-
-<p><code>
-$ sudo apt install git --yes
-$ sudo apt install make --yes
-$ sudo apt install virtualenv --yes
-$ sudo apt install curl --yes
-$ sudo apt install jq --yes
-$ sudo apt install libssl-dev --yes
-$ sudo apt install libffi-dev --yes
-$ sudo apt install libpcap-dev --yes
-</code></p>
-
-<p>Python 2.x is needed in the native environment for (at least) the repo
-tool (installed below). </p>
-
-<p>And, Python-dev is needed when the pip packages are installed while
-setting up the virtualenv.</p>
-
-<p>To install python 2.X use the following command.</p>
-
-<p><code>
-$ sudo apt install python --yes
-$ sudo apt install python-dev --yes
-</code></p>
-
-<h3>Virtual Box</h3>
-
-<p>There are a couple of different ways to use Vagrant, the following
-steps assume that you install VirtualBox.</p>
-
-<p><code>
-$ sudo sh -c "/bin/echo 'deb http://download.virtualbox.org/virtualbox/debian xenial contrib' &gt;&gt; /etc/apt/sources.list"
-</code></p>
-
-<p><code>
-$ wget https://www.virtualbox.org/download/oracle_vbox_2016.asc
-$ sudo apt-key add oracle_vbox_2016.asc
-</code></p>
-
-<p><code>
-$ wget https://www.virtualbox.org/download/oracle_vbox.asc
-$ sudo apt-key add oracle_vbox.asc
-</code></p>
-
-<p>VirtualBox-5.1 is the latest release of VirtualBox, yet it is not
-compatible with the Ubuntu 16.04 default version of <em>vagrant</em>.  The best
-release of VirtualBox to install is 5.0. </p>
-
-<p>Here is the note from vagrant...</p>
-
-<pre>
-The provider 'virtualbox' that was requested to back the machine
-'voltha' is reporting that it isn't usable on this system. The
-reason is shown below:
-
-Vagrant has detected that you have a version of VirtualBox installed
-that is not supported by this version of Vagrant. Please install one of
-the supported versions listed below to use Vagrant:
-
-4.0, 4.1, 4.2, 4.3, 5.0
-
-A Vagrant update may also be available that adds support for the version
-you specified. Please check www.vagrantup.com/downloads.html to download
-the latest version.
-</pre>
-
-<p><code>
-$ sudo apt update 
-sudo apt install virtualbox-5.0 --yes
-sudo apt install vagrant
-</code></p>
-
-<h3>Google repo tool</h3>
-
-<p>Install the Google repo tool for working with the VOLTHA repository.
-Installing from Google APIs (googleapis below) seems to be a step that
-is blocked by many corporate firewalls.  An alternative is to install
-repo from the apt packages.</p>
-
-<p><code>
-$ sudo apt install repo --yes
-</code></p>
-
-<p>Note: The Ubuntu repo package, when executed, may complain about being
-out of date.  Follow the upgrade commands that repo puts to the
-standard out.</p>
-
-<p>Some older linux distributions do not have repo available.  If you
-cannot apt install repo, then follow the commands below to fetch repo
-from the Google site.  Skip this collection of steps if you have
-installed repo with apt.  </p>
-
-<p><code>
-$ mkdir ~/bin 
-$ PATH=~/bin:$PATH 
-$ curl https://storage.googleapis.com/git-repo-downloads/repo &gt; ~/bin/repo 
-$ chmod a+x ~/bin/repo
-</code></p>
-
-<h3>GIT environment</h3>
-
-<p>Repo requires that at least your git config is setup.  Set it up for
-your user.name and user.email.</p>
-
-<p><code>
-$ git config --global user.email "&lt;email address&gt;"
-$ git config --global user.name "Firstname Lastname"
-</code></p>
-
-<h3>Getting the VOLTHA code</h3>
-
-<p><code>
-$ mkdir cord
-$ cd cord
-$ repo init -u https://gerrit.opencord.org/manifest
-$ repo sync
-</code></p>
-
-<p><code>
-$ cd incubator/voltha
-voltha$ . ./env.sh
-</code></p>
-
-<p>The last step above the sources the virtualenv enviroment should
-pass.  If it does not and exits because of an error, see the commands
-below. </p>
-
-<h3>Virtualenv ERROR Handling</h3>
-
-<p>When you start with a clean Linux system, the first time virtualenv is
-setup it installs a number of pip packages.  If the base packages on
-the machine are not present for the pip packages to be installed
-correctly, then the virtualenv may be in a half-configured state.</p>
-
-<p>If you find yourself in this state, the error should be addressed, the
-virtualenv directory should be deleted, and the environment should be
-sourced again.</p>
-
-<p><code>
-voltha$ rm -rf venv-linux
-&lt; Fix virtualenv environment &gt;
-voltha$ . ./env.sh
-</code></p>
-
-<h3>Verify working VOLTHA</h3>
-
-<p>Thes commands are meant to be identical to the commands documented in
-BUILD.md.  At this point you are finished with the basic Linux
-configuration and should be able to start working with VOLTHA. </p>
-
-<p><code>
-cd incubator/voltha
-vagrant up  # when you do this for the first time, this will take considerable time
-vagrant ssh # the rest to be executed inside the vagrant VM
-cd /voltha
-. env.sh
-make fetch
-make
-</code></p>
-
-<h3>Advanced Commands</h3>
-
-<p>If you are running the former pyofagent, then you will need the
-following packages installed in your <strong>native</strong> environment.</p>
-
-<p><code>
-$ sudo apt install mininet --yes
-$ sudo apt install netifaces --yes
-</code></p>
-
-</body>
-</html>