| # Copyright 2017-present Adtran, Inc. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| from evc import EVC |
| from evc_map import EVCMap |
| from enum import IntEnum |
| |
| from untagged_evc import UntaggedEVC |
| from utility_evc import UtilityEVC |
| import voltha.core.flow_decomposer as fd |
| from voltha.core.flow_decomposer import * |
| from voltha.protos.openflow_13_pb2 import OFPP_MAX |
| from twisted.internet import defer |
| from twisted.internet.defer import returnValue, inlineCallbacks, gatherResults |
| |
| log = structlog.get_logger() |
| |
| # IP Protocol numbers |
| _supported_ip_protocols = [ |
| 1, # ICMP |
| 2, # IGMP |
| 6, # TCP |
| 17, # UDP |
| ] |
| |
| _existing_downstream_flow_entries = {} # device-id -> signature-table |
| # | |
| # +-> downstream-signature |
| # | |
| # +-> 'evc' -> EVC |
| # | |
| # +-> flow-ids -> flow-entry |
| |
| _existing_upstream_flow_entries = {} # device-id -> flow dictionary |
| # | |
| # +-> flow-id -> flow-entry |
| |
| |
| class FlowEntry(object): |
| """ |
| Provide a class that wraps the flow rule and also provides state/status for a FlowEntry. |
| |
| When a new flow is sent, it is first decoded to check for any potential errors. If None are |
| found, the entry is created and it is analyzed to see if it can be combined to with any other flows |
| to create or modify an existing EVC. |
| |
| Note: Since only E-LINE is supported, modification of an existing EVC is not performed. |
| """ |
| class FlowDirection(IntEnum): |
| UPSTREAM = 0 # UNI port to NNI Port |
| DOWNSTREAM = 1 # NNI port to UNI Port |
| NNI = 2 # NNI port to NNI Port |
| UNI = 3 # UNI port to UNI Port |
| OTHER = 4 # Unable to determine |
| |
| _flow_dir_map = { |
| (FlowDirection.UNI, FlowDirection.NNI): FlowDirection.UPSTREAM, |
| (FlowDirection.NNI, FlowDirection.UNI): FlowDirection.DOWNSTREAM, |
| (FlowDirection.UNI, FlowDirection.UNI): FlowDirection.UNI, |
| (FlowDirection.NNI, FlowDirection.NNI): FlowDirection.NNI, |
| } |
| LEGACY_CONTROL_VLAN = 4000 |
| |
| # Well known EtherTypes |
| class EtherType(IntEnum): |
| EAPOL = 0x888E |
| IPv4 = 0x0800 |
| IPv6 = 0x86DD |
| ARP = 0x0806 |
| |
| # Well known IP Protocols |
| class IpProtocol(IntEnum): |
| IGMP = 2 |
| UDP = 17 |
| |
| def __init__(self, flow, handler): |
| self._flow = flow |
| self._handler = handler |
| self.flow_id = flow.id |
| self.evc = None # EVC this flow is part of |
| self.evc_map = None # EVC-MAP this flow is part of |
| self._flow_direction = FlowEntry.FlowDirection.OTHER |
| self._logical_port = None # Currently ONU VID is logical port if not doing xPON |
| self._is_multicast = False |
| self._is_acl_flow = False |
| |
| # A value used to locate possible related flow entries |
| self.signature = None |
| self.downstream_signature = None # Valid for upstream EVC-MAP Flows |
| |
| # Selection properties |
| self.in_port = None |
| self.vlan_id = None |
| self.pcp = None |
| self.eth_type = None |
| self.ip_protocol = None |
| self.ipv4_dst = None |
| self.udp_dst = None # UDP Port # |
| self.udp_src = None # UDP Port # |
| self.inner_vid = None |
| |
| # Actions |
| self.output = None |
| self.pop_vlan = 0 |
| self.push_vlan_tpid = [] |
| self.push_vlan_id = [] |
| |
| self._name = self.create_flow_name() |
| |
| def __str__(self): |
| return 'flow_entry: {}, in: {}, out: {}, vid: {}, inner:{}, eth: {}, IP: {}'.format( |
| self.name, self.in_port, self.output, self.vlan_id, self.inner_vid, |
| self.eth_type, self.ip_protocol) |
| |
| @property |
| def name(self): |
| return self._name # TODO: Is a name really needed in production? |
| |
| def create_flow_name(self): |
| return 'flow-{}-{}'.format(self.device_id, self.flow_id) |
| |
| @property |
| def flow(self): |
| return self._flow |
| |
| @property |
| def handler(self): |
| return self._handler |
| |
| @property |
| def device_id(self): |
| return self.handler.device_id |
| |
| @property |
| def flow_direction(self): |
| return self._flow_direction |
| |
| @property |
| def is_multicast_flow(self): |
| return self._is_multicast |
| |
| @property |
| def is_acl_flow(self): |
| return self._is_acl_flow or self._needs_acl_support |
| |
| @property |
| def logical_port(self): |
| return self._logical_port # NNI or UNI Logical Port |
| |
| @staticmethod |
| def create(flow, handler): |
| """ |
| Create the appropriate FlowEntry wrapper for the flow. This method returns a two |
| results. |
| |
| The first result is the flow entry that was created. This could be a match to an |
| existing flow since it is a bulk update. None is returned only if no match to |
| an existing entry is found and decode failed (unsupported field) |
| |
| The second result is the EVC this flow should be added to. This could be an |
| existing flow (so your adding another EVC-MAP) or a brand new EVC (no existing |
| EVC-MAPs). None is returned if there are not a valid EVC that can be created YET. |
| |
| :param flow: (Flow) Flow entry passed to VOLTHA adapter |
| :param handler: (AdtranDeviceHandler) handler for the device |
| |
| :return: (FlowEntry, EVC) |
| """ |
| # Exit early if it already exists |
| try: |
| flow_entry = FlowEntry(flow, handler) |
| |
| if not flow_entry._decode(): |
| return None, None |
| |
| if flow_entry.device_id not in _existing_downstream_flow_entries: |
| _existing_downstream_flow_entries[flow_entry.device_id] = {} |
| |
| if flow_entry.device_id not in _existing_upstream_flow_entries: |
| _existing_upstream_flow_entries[flow_entry.device_id] = {} |
| |
| downstream_sig_table = _existing_downstream_flow_entries[flow_entry.device_id] |
| upstream_flow_table = _existing_upstream_flow_entries[flow_entry.device_id] |
| |
| if flow_entry.flow_direction == FlowEntry.FlowDirection.UPSTREAM and\ |
| flow_entry.flow_id in upstream_flow_table: |
| return flow_entry, None |
| |
| if flow_entry.flow_direction == FlowEntry.FlowDirection.DOWNSTREAM and\ |
| flow_entry.signature in downstream_sig_table and\ |
| flow_entry.flow_id in downstream_sig_table[flow_entry.signature]: |
| return flow_entry, None |
| |
| # Look for any matching flows in the other direction that might help make an EVC |
| # and then save it off in the device specific flow table |
| # TODO: For now, only support for E-LINE services between NNI and UNI |
| |
| downstream_flow = None |
| upstream_flows = None |
| downstream_sig = None |
| |
| if flow_entry._is_multicast: # Uni-directional flow |
| assert flow_entry._flow_direction == FlowEntry.FlowDirection.DOWNSTREAM, \ |
| 'Only downstream Multicast supported' |
| downstream_flow = flow_entry |
| downstream_sig = flow_entry.signature |
| upstream_flows = [] |
| |
| elif flow_entry.flow_direction == FlowEntry.FlowDirection.DOWNSTREAM: |
| downstream_flow = flow_entry |
| downstream_sig = flow_entry.signature |
| |
| elif flow_entry.flow_direction == FlowEntry.FlowDirection.UPSTREAM: |
| downstream_sig = flow_entry.downstream_signature |
| |
| if downstream_sig is None: |
| return None, None |
| |
| if downstream_sig not in downstream_sig_table: |
| downstream_sig_table[downstream_sig] = {} |
| downstream_sig_table[downstream_sig]['evc'] = None |
| |
| downstream_flow_table = downstream_sig_table[downstream_sig] |
| evc = downstream_flow_table['evc'] |
| |
| # Save to proper flow table |
| if flow_entry.flow_direction == FlowEntry.FlowDirection.UPSTREAM: |
| upstream_flow_table[flow_entry.flow_id] = flow_entry |
| downstream_flow = evc.flow_entry if evc is not None else \ |
| next((_flow for _flow in downstream_flow_table.itervalues() if isinstance(_flow, FlowEntry)), None) |
| |
| elif flow_entry.flow_direction == FlowEntry.FlowDirection.DOWNSTREAM: |
| downstream_flow_table[flow_entry.flow_id] = flow_entry |
| |
| # Now find all the upstream flows |
| if downstream_flow is not None: |
| upstream_flows = [_flow for _flow in upstream_flow_table.itervalues() |
| if _flow.downstream_signature == downstream_flow.signature] |
| if len(upstream_flows) == 0 and not downstream_flow.is_multicast_flow: |
| upstream_flows = None |
| |
| # Compute EVC and and maps |
| evc = FlowEntry._create_evc_and_maps(evc, downstream_flow, upstream_flows) |
| if evc is not None and evc.valid and downstream_flow_table['evc'] is None: |
| downstream_flow_table['evc'] = evc |
| |
| return flow_entry, evc |
| |
| except Exception as e: |
| log.exception('flow-entry-processing', e=e) |
| return None, None |
| |
| @staticmethod |
| def _create_evc_and_maps(evc, downstream_flow, upstream_flows): |
| """ |
| Give a set of flows, find (or create) the EVC and any needed EVC-MAPs |
| |
| :param evc: (EVC) Existing EVC for downstream flow. May be null if not created |
| :param downstream_flow: (FlowEntry) NNI -> UNI flow (provides much of the EVC values) |
| :param upstream_flows: (list of FlowEntry) UNI -> NNI flows (provides much of the EVC-MAP values) |
| |
| :return: EVC object |
| """ |
| if (evc is None and downstream_flow is None) or upstream_flows is None: |
| return None |
| |
| # Get any existing EVC if a flow is already created |
| |
| if downstream_flow.evc is None: |
| if evc is not None: |
| downstream_flow.evc = evc |
| |
| elif downstream_flow.is_multicast_flow: |
| from mcast import MCastEVC |
| downstream_flow.evc = MCastEVC.create(downstream_flow) |
| |
| elif downstream_flow.is_acl_flow: |
| downstream_flow.evc = downstream_flow.get_utility_evc(upstream_flows) |
| else: |
| downstream_flow.evc = EVC(downstream_flow) |
| |
| if not downstream_flow.evc.valid: |
| return None |
| |
| # Create EVC-MAPs. Note upstream_flows is empty list for multicast |
| # For Packet In/Out support. The upstream flows for will have matching |
| # signatures. So the first one to get created should create the EVC and |
| # if it needs and ACL, do so then. The second one should just reference |
| # the first map. |
| # |
| # If the second has and ACL, then it should add it to the map. |
| # TODO: What to do if the second (or third, ...) is the data one. |
| # What should it do then? |
| sig_map_map = {f.signature: f.evc_map for f in upstream_flows |
| if f.evc_map is not None} |
| |
| for flow in upstream_flows: |
| if flow.evc_map is None: |
| if flow.signature in sig_map_map: |
| # Found an explicity matching existing EVC-MAP. Add flow to this EVC-MAP |
| flow.evc_map = sig_map_map[flow.signature].add_flow(flow, downstream_flow.evc) |
| else: |
| # May need to create a MAP or search for an existing ACL/user EVC-Map |
| upstream_flow_table = _existing_upstream_flow_entries[flow.device_id] |
| existing_flow = EVCMap.find_matching_ingress_flow(flow, upstream_flow_table) |
| |
| if existing_flow is None: |
| flow.evc_map = EVCMap.create_ingress_map(flow, downstream_flow.evc) |
| else: |
| flow.evc_map = existing_flow.add_flow(flow, downstream_flow.evc) |
| |
| all_maps_valid = all(flow.evc_map.valid for flow in upstream_flows) \ |
| or downstream_flow.is_multicast_flow |
| |
| return downstream_flow.evc if all_maps_valid else None |
| |
| def get_utility_evc(self, upstream_flows=None, use_default_vlan_id=False): |
| assert self.is_acl_flow, 'Utility evcs are for acl flows only' |
| if upstream_flows is not None and\ |
| any(flow.eth_type == FlowEntry.EtherType.EAPOL for flow in upstream_flows) and\ |
| self.handler.utility_vlan != self.handler.untagged_vlan: |
| return UntaggedEVC.create(self, use_default_vlan_id) |
| |
| return UtilityEVC.create(self, use_default_vlan_id) |
| |
| @property |
| def _needs_acl_support(self): |
| if self.ipv4_dst is not None: # In case MCAST downstream has ACL on it |
| return False |
| |
| return self.eth_type is not None or self.ip_protocol is not None or\ |
| self.ipv4_dst is not None or self.udp_dst is not None or self.udp_src is not None |
| |
| def _decode(self): |
| """ |
| Examine flow rules and extract appropriate settings |
| """ |
| status = self._decode_traffic_selector() and self._decode_traffic_treatment() |
| |
| if status: |
| # Determine direction of the flow |
| def port_type(port_number): |
| if port_number in self._handler.northbound_ports: |
| return FlowEntry.FlowDirection.NNI |
| elif port_number <= OFPP_MAX: |
| return FlowEntry.FlowDirection.UNI |
| return FlowEntry.FlowDirection.OTHER |
| |
| self._flow_direction = FlowEntry._flow_dir_map.get((port_type(self.in_port), port_type(self.output)), |
| FlowEntry.FlowDirection.OTHER) |
| |
| # Modify flow entry for newer utility/untagged VLAN support |
| # New Packet In/Out support |
| if self._flow_direction == FlowEntry.FlowDirection.DOWNSTREAM and\ |
| self.vlan_id in (FlowEntry.LEGACY_CONTROL_VLAN, |
| self.handler.untagged_vlan): |
| # May be for to controller flow downstream (no ethType) or multicast (ethType = IP) |
| if self.eth_type is None or self._needs_acl_support: |
| self._is_multicast = False |
| self._is_acl_flow = True |
| if self.inner_vid is not None: |
| logical_port, subscriber_vlan, untagged_vlan = \ |
| self._handler.get_onu_port_and_vlans(self) |
| self.inner_vid = subscriber_vlan |
| self.vlan_id = self.handler.utility_vlan |
| else: |
| self.vlan_id = self.handler.untagged_vlan |
| elif self._flow_direction == FlowEntry.FlowDirection.UPSTREAM: |
| try: |
| # TODO: Need to support flow retry if the ONU is not yet activated !!!! |
| # Get the correct logical port and subscriber VLAN for this UNI |
| self._logical_port, self.vlan_id, untagged_vlan = \ |
| self._handler.get_onu_port_and_vlans(self) |
| |
| if self._needs_acl_support: |
| self._is_acl_flow = True |
| if self.eth_type == FlowEntry.EtherType.EAPOL and \ |
| self.handler.untagged_vlan != self.handler.utility_vlan: |
| self.vlan_id = None |
| self.push_vlan_id[0] = self.handler.untagged_vlan |
| else: |
| self.push_vlan_id[0] = self.handler.utility_vlan |
| |
| except Exception as e: |
| # TODO: Need to support flow retry if the ONU is not yet activated !!!! |
| log.exception('tag-fixup', e=e) |
| |
| # Create a signature that will help locate related flow entries on a device. |
| # These are not exact, just ones that may be put together to make an EVC. The |
| # basic rules are: |
| # 1 - Same device |
| dev_id = self._handler.device_id |
| |
| # 2 - Port numbers in increasing order |
| ports = [self.in_port, self.output] |
| ports.sort() |
| |
| # 3 - The outer VID |
| # 4 - The inner VID. Wildcard if downstream |
| push_len = len(self.push_vlan_id) |
| if push_len == 0: |
| outer = self.vlan_id |
| inner = self.inner_vid |
| else: |
| outer = self.push_vlan_id[-1] |
| if push_len == 1: |
| inner = self.vlan_id |
| else: |
| inner = self.push_vlan_id[-2] |
| |
| upstream_sig = '{}'.format(dev_id) |
| downstream_sig = '{}'.format(dev_id) |
| |
| for port in ports: |
| upstream_sig += '.{}'.format(port) |
| downstream_sig += '.{}'.format(port if self.handler.is_nni_port(port) else '*') |
| |
| upstream_sig += '.{}.{}'.format(outer, inner) |
| downstream_sig += '.{}.*'.format(outer) |
| |
| if self._flow_direction == FlowEntry.FlowDirection.DOWNSTREAM: |
| self.signature = downstream_sig |
| else: |
| self.signature = upstream_sig |
| self.downstream_signature = downstream_sig |
| |
| return status |
| |
| def _decode_traffic_selector(self): |
| """ |
| Extract EVC related traffic selection settings |
| """ |
| self.in_port = fd.get_in_port(self._flow) |
| |
| if self.in_port > OFPP_MAX: |
| log.warn('logical-input-ports-not-supported') |
| return False |
| |
| for field in fd.get_ofb_fields(self._flow): |
| if field.type == IN_PORT: |
| assert self.in_port == field.port, 'Multiple Input Ports found in flow rule' |
| |
| if self._handler.is_nni_port(self.in_port): |
| self._logical_port = self.in_port # TODO: This should be a lookup |
| |
| elif field.type == VLAN_VID: |
| # log.info('*** field.type == VLAN_VID', value=field.vlan_vid & 0xfff) |
| self.vlan_id = field.vlan_vid & 0xfff |
| self._is_multicast = self.vlan_id in self._handler.multicast_vlans |
| |
| elif field.type == VLAN_PCP: |
| # log.info('*** field.type == VLAN_PCP', value=field.vlan_pcp) |
| self.pcp = field.vlan_pcp |
| |
| elif field.type == ETH_TYPE: |
| # log.info('*** field.type == ETH_TYPE', value=field.eth_type) |
| self.eth_type = field.eth_type |
| |
| elif field.type == IP_PROTO: |
| # log.info('*** field.type == IP_PROTO', value=field.ip_proto) |
| self.ip_protocol = field.ip_proto |
| |
| if self.ip_protocol not in _supported_ip_protocols: |
| # log.error('Unsupported IP Protocol') |
| return False |
| |
| elif field.type == IPV4_DST: |
| # log.info('*** field.type == IPV4_DST', value=field.ipv4_dst) |
| self.ipv4_dst = field.ipv4_dst |
| |
| elif field.type == UDP_DST: |
| # log.info('*** field.type == UDP_DST', value=field.udp_dst) |
| self.udp_dst = field.udp_dst |
| |
| elif field.type == UDP_SRC: |
| # log.info('*** field.type == UDP_SRC', value=field.udp_src) |
| self.udp_src = field.udp_src |
| |
| elif field.type == METADATA: |
| # log.info('*** field.type == METADATA', value=field.table_metadata) |
| self.inner_vid = field.table_metadata |
| |
| else: |
| log.warn('unsupported-selection-field', type=field.type) |
| self._status_message = 'Unsupported field.type={}'.format(field.type) |
| return False |
| |
| return True |
| |
| def _decode_traffic_treatment(self): |
| self.output = fd.get_out_port(self._flow) |
| |
| if self.output > OFPP_MAX: |
| log.warn('logical-output-ports-not-supported') |
| return False |
| |
| for act in fd.get_actions(self._flow): |
| if act.type == fd.OUTPUT: |
| assert self.output == act.output.port, 'Multiple Output Ports found in flow rule' |
| pass # Handled earlier |
| |
| elif act.type == POP_VLAN: |
| # log.info('*** action.type == POP_VLAN') |
| self.pop_vlan += 1 |
| |
| elif act.type == PUSH_VLAN: |
| # log.info('*** action.type == PUSH_VLAN', value=act.push) |
| # TODO: Do we want to test the ethertype for support? |
| tpid = act.push.ethertype |
| self.push_vlan_tpid.append(tpid) |
| |
| elif act.type == SET_FIELD: |
| # log.info('*** action.type == SET_FIELD', value=act.set_field.field) |
| assert (act.set_field.field.oxm_class == ofp.OFPXMC_OPENFLOW_BASIC) |
| field = act.set_field.field.ofb_field |
| if field.type == VLAN_VID: |
| self.push_vlan_id.append(field.vlan_vid & 0xfff) |
| |
| else: |
| # TODO: May need to modify ce-preservation |
| log.warn('unsupported-action', action=act) |
| self._status_message = 'Unsupported action.type={}'.format(act.type) |
| return False |
| |
| return True |
| |
| @staticmethod |
| def drop_missing_flows(device_id, valid_flow_ids): |
| dl = [] |
| try: |
| flow_table = _existing_upstream_flow_entries.get(device_id) |
| if flow_table is not None: |
| flows_to_drop = [flow for flow_id, flow in flow_table.items() |
| if flow_id not in valid_flow_ids] |
| dl.extend([flow.remove() for flow in flows_to_drop]) |
| |
| sig_table = _existing_downstream_flow_entries.get(device_id) |
| if sig_table is not None: |
| for flow_table in sig_table.itervalues(): |
| flows_to_drop = [flow for flow_id, flow in flow_table.items() |
| if isinstance(flow, FlowEntry) and flow_id not in valid_flow_ids] |
| dl.extend([flow.remove() for flow in flows_to_drop]) |
| |
| except Exception as e: |
| pass |
| |
| return gatherResults(dl, consumeErrors=True) if len(dl) > 0 else returnValue('no-flows-to-drop') |
| |
| @inlineCallbacks |
| def remove(self): |
| """ |
| Remove this flow entry from the list of existing entries and drop EVC |
| if needed |
| """ |
| # Remove from exiting table list |
| |
| device_id = self._handler.device_id |
| flow_id = self._flow.id |
| flow_table = None |
| sig_table = None |
| |
| if self.flow_direction == FlowEntry.FlowDirection.UPSTREAM: |
| flow_table = _existing_upstream_flow_entries.get(device_id) |
| |
| elif self.flow_direction == FlowEntry.FlowDirection.DOWNSTREAM: |
| sig_table = _existing_downstream_flow_entries.get(device_id) |
| flow_table = sig_table.get(self.signature) |
| |
| if flow_table is None or flow_id not in flow_table: |
| returnValue('NOP') |
| |
| # Remove from flow table and clean up flow table if empty |
| |
| del flow_table[flow_id] |
| evc_map, self.evc_map = self.evc_map, None |
| evc = None |
| |
| if self.flow_direction == FlowEntry.FlowDirection.UPSTREAM: |
| if len(flow_table) == 0: |
| del _existing_upstream_flow_entries[device_id] |
| |
| elif self.flow_direction == FlowEntry.FlowDirection.DOWNSTREAM: |
| if len(flow_table) == 1: # Only 'evc' entry present |
| evc = flow_table['evc'] |
| else: |
| assert flow_table['evc'] is not None, 'EVC flow re-assignment error' |
| |
| # Remove flow from the hardware |
| try: |
| dl = [] |
| if evc_map is not None: |
| dl.append(evc_map.delete(self)) |
| |
| if evc is not None: |
| dl.append(evc.delete()) |
| |
| yield gatherResults(dl, consumeErrors=True) |
| |
| except Exception as e: |
| log.exception('removal', e=e) |
| |
| if self.flow_direction == FlowEntry.FlowDirection.DOWNSTREAM: |
| |
| # If this flow owns the EVC, assign it to a remaining flow |
| flow_evc = flow_table['evc'] |
| |
| if flow_evc is not None and flow_evc.flow_entry is not None and \ |
| flow_id == flow_evc.flow_entry.flow_id: |
| flow_table['evc'].flow_entry = next((_flow for _flow in flow_table.itervalues() |
| if isinstance(_flow, FlowEntry) |
| and _flow.flow_id != flow_id), None) |
| |
| # If evc was deleted, remove the flow table reference |
| if evc is not None: |
| del flow_table['evc'] |
| del sig_table[self.signature] |
| if len(sig_table) == 0: |
| del _existing_downstream_flow_entries[device_id] |
| |
| self.evc = None |
| returnValue('Done') |
| |
| @staticmethod |
| def find_evc_map_flows(onu): |
| """ |
| For a given OLT, find all the EVC Maps for a specific ONU |
| :param onu: (Onu) onu |
| :return: (list) of matching flows |
| """ |
| # EVCs are only in the downstream table, EVC Map are in upstream |
| |
| device_id = onu.device_id |
| onu_ports = onu.uni_ports |
| |
| all_flow_entries = _existing_upstream_flow_entries.get(device_id) or {} |
| evc_maps = [flow_entry.evc_map for flow_entry in all_flow_entries.itervalues() |
| if flow_entry.in_port in onu_ports |
| and flow_entry.evc_map is not None |
| and flow_entry.evc_map.valid] |
| |
| return evc_maps |
| |
| @staticmethod |
| def sync_flows_by_onu(onu, reflow=False): |
| """ |
| Check status of all flows on a per-ONU basis. Called when values |
| within the ONU are modified that may affect traffic. |
| |
| :param onu: (Onu) ONU to examine |
| :param reflow: (boolean) Flag, if True, requests that the flow be sent to |
| hardware even if the values in hardware are |
| consistent with the current flow settings |
| """ |
| evc_maps = FlowEntry.find_evc_map_flows(onu) |
| evcs = {} |
| |
| for evc_map in evc_maps: |
| if reflow or evc_map.reflow_needed(): |
| evc_map.installed = False |
| |
| if not evc_map.installed: |
| evc = evc_map.evc |
| if evc is not None: |
| evcs[evc.name] = evc |
| |
| for evc in evcs.itervalues(): |
| evc.installed = False |
| evc.schedule_install(delay=2) |
| |
| ###################################################### |
| # Bulk operations |
| |
| @staticmethod |
| def clear_all(device_id): |
| """ |
| Remove all flows for the device. |
| |
| :param device_id: voltha adapter device id |
| """ |
| |
| if device_id in _existing_downstream_flow_entries: |
| del _existing_downstream_flow_entries[device_id] |
| |
| if device_id in _existing_upstream_flow_entries: |
| del _existing_upstream_flow_entries[device_id] |
| |
| @staticmethod |
| def get_packetout_info(device_id, logical_port): |
| """ |
| Find parameters needed to send packet out succesfully to the OLT. |
| |
| :param device_id: A Voltha.Device object. |
| :param logical_port: (int) logical port number for packet to go out. |
| |
| :return: physical port number, ctag, stag, evcmap name |
| """ |
| from ..onu import Onu |
| |
| all_flow_entries = _existing_upstream_flow_entries.get(device_id) or {} |
| for flow_entry in all_flow_entries.itervalues(): |
| log.debug('get-packetout-info', flow_entry=flow_entry) |
| |
| # match logical port |
| if flow_entry.evc_map is not None and flow_entry.evc_map.valid and \ |
| flow_entry.logical_port == logical_port: |
| evc_map = flow_entry.evc_map |
| gem_ids_and_vid = evc_map.gem_ids_and_vid |
| |
| # must have valid gem id |
| if len(gem_ids_and_vid) > 0: |
| for onu_id, gem_ids_with_vid in gem_ids_and_vid.iteritems(): |
| log.debug('get-packetout-info', onu_id=onu_id, |
| gem_ids_with_vid=gem_ids_with_vid) |
| if len(gem_ids_with_vid) > 0: |
| gem_ids = gem_ids_with_vid[0] |
| ctag = gem_ids_with_vid[1] |
| gem_id = gem_ids[0] # TODO: always grab fist in list |
| return flow_entry.in_port, ctag, Onu.gem_id_to_gvid(gem_id), \ |
| evc_map.get_evcmap_name(onu_id, gem_id) |
| return None, None, None, None |