M15 - Spirent - Verify 802.1ad (QinQ) Upstream

Test Objective

• Purpose of this test is to verify OLT can insert second VLAN tag (SVID) in upstream direction

Test Configuration

• Test Setup as shown in Section – 7
• Maple OLT and ONU is activated using VOLTHA
• Provision HSIA/unicast service on the OLT and connected ONU from VOLTHA

Test Procedure

• On Spirent, send untagged traffic in upstream direction
• On the receiving port end, capture traffic and verify the VLAN parameters

Pass/Fail Criteria:

• Upstream: o configure on the Spirent side to send untagged traffic (NO vlan configure) o OLT and ONT will add 1025 ,1025 respectively (i.e. 1025,1025) o Captured frame should contain 1025, 1025 vlan