N5 - Get List of Adapters

Test Objective

  • The purpose of this test is to retrieve the list of adapters

Test Configuration

  • Preparatory steps completed
  • Test-cases N01, N02 and N03 completed successfully
  • The Netconf client/server connection is up

Test Procedure

  • Execute the GET command on the VolthaInstance/adapters

    • Expand the ietf-voltha@2016-11-15 module on the left pane of the Netconf Browser
    • Expand the VolthaInstance container
    • Select the adapters grouping
    • Right click and select get(execute) command

Pass/Fail Criteria

Upon successful execution of the command, the similar output as below will be displayed:

  • In the logs windows:

    Command 404d0eb7-4008-48b1-a0e5-10596a3a421f:17; get was successful (took 76 ms).

  • In the output pane, the Output XML would be similar to:

    <?xml version="1.0" encoding="utf-8"?>
<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <VolthaInstance xmlns="urn:opencord:params:xml:ns:voltha:ietf-voltha">
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.4</version>
      <vendor>Voltha project</vendor>
      <id>broadcom_onu</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.4</version>
      <vendor>Voltha project</vendor>
      <id>maple_olt</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.1</version>
      <vendor>Microsemi / Celestica</vendor>
      <id>microsemi</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.4</version>
      <vendor>Voltha project</vendor>
      <id>ponsim_olt</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.4</version>
      <vendor>Voltha project</vendor>
      <id>ponsim_onu</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.1</version>
      <vendor>Voltha project</vendor>
      <id>simulated_olt</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.1</version>
      <vendor>Voltha project</vendor>
      <id>simulated_onu</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.1</version>
      <vendor>Tibit Communications Inc.</vendor>
      <id>tibit_olt</id>
    </adapters>
    <adapters>
      <config>
        <log_level>INFO</log_level>
      </config>
      <version>0.1</version>
      <vendor>Tibit Communications Inc.</vendor>
      <id>tibit_onu</id>
    </adapters>
  </VolthaInstance>
</data>

  • In the output pane, the Output Tree would display a well formed tree as per the YANG module definition

    Get Adapters