S3 - Verify EAPOL Remote Gateway Authentication

Test Objective

• Purpose of this test is to verify that 802.1X EAPOL messages are forwarded to the ONOS from VOLTHA
  • Correct simulated PON environment
  • Logical device visible in VOLTHA CLI

Test Configuration

• VOLTHA ensemble running as per deployment instructions.
• Start the freeradius container

docker-compose -f compose/docker-compose-auth-test.yml up -d freeradius

• PONSIM OLT and ONUs registered as ACTIVE in VOLTHA

Test Procedure

Execute the following command

/sbin/wpa_supplicant -Dwired -ipon1_128 -c /etc/wpa_supplicant/wpa_supplicant.conf

This should pass with the following output

Successfully initialized wpa_supplicant
pon1_128: Associated with 01:80:c2:00:00:03
WMM AC: Missing IEs
pon1_128: CTRL-EVENT-EAP-STARTED EAP authentication started
pon1_128: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=4
pon1_128: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
pon1_128: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully

Pass/Fail Criteria

• EAPOL Authentication should pass