Initial commit of the voltha installer. There are several things that
need to be cleaned up but the installer is fully functional in test
mode and creates 3 non-clustered VMs with identical voltha installs
until such time as HA is ready. Once HA is ready, the scripts will be
modified to deploy the full HA cluster.
This update partially addresses Epic VOL-6.
Made changes requested by the reviewers.
Change-Id: I083239e1f349136d2ec1e51e09391da341177076
diff --git a/install/ConfigVagrantTesting.sh b/install/ConfigVagrantTesting.sh
new file mode 100755
index 0000000..3a9b06d
--- /dev/null
+++ b/install/ConfigVagrantTesting.sh
@@ -0,0 +1,148 @@
+#!/bin/bash
+
+baseImage="Ubuntu1604LTS"
+iVmName="Ubuntu1604LTS-1"
+iVmNetwork="vagrant-libvirt"
+shutdownTimeout=5
+ipTimeout=10
+
+lBlue='\033[1;34m'
+green='\033[0;32m'
+orange='\033[0;33m'
+NC='\033[0m'
+red='\033[0;31m'
+yellow='\033[1;33m'
+dGrey='\033[1;30m'
+lGrey='\033[1;37m'
+lCyan='\033[1;36m'
+
+# Shut down the domain in case it's running.
+#echo -e "${lBlue}Shut down the ${lCyan}$iVmName${lBlue} VM if running${NC}"
+#ctr=0
+#vStat=`virsh list | grep $iVmName`
+#while [ ! -z "$vStat" ];
+#do
+# virsh shutdown $iVmName
+# echo "Waiting for $iVmName to shut down"
+# sleep 2
+# vStat=`virsh list | grep $iVmName`
+# ctr=`expr $ctr + 1`
+# if [ $ctr -eq $shutdownTimeout ]; then
+# echo -e "${red}Tired of waiting, forcing the VM off${NC}"
+# virsh destroy $iVmName
+# vStat=`virsh list | grep $iVmName`
+# fi
+#done
+
+
+# Delete the VM and ignore any errors should they occur
+#echo -e "${lBlue}Undefining the ${lCyan}$iVmName${lBlue} domain${NC}"
+#virsh undefine $iVmName
+
+# Remove the associated volume
+#echo -e "${lBlue}Removing the ${lCyan}$iVmName.qcow2${lBlue} volume${NC}"
+#virsh vol-delete "${iVmName}.qcow2" default
+
+# Clone the base vanilla ubuntu install
+#echo -e "${lBlue}Cloning the ${lCyan}$baseImage.qcow2${lBlue} to ${lCyan}$iVmName.qcow2${NC}"
+#virsh vol-clone "${baseImage}.qcow2" "${iVmName}.qcow2" default
+
+# Create the xml file and define the VM for virsh
+#echo -e "${lBlue}Defining the ${lCyan}$iVmName${lBlue} virtual machine${NC}"
+#cat vmTemplate.xml | sed -e "s/{{VMName}}/$iVmName/g" | sed -e "s/{{VMNetwork}}/$iVmNetwork/g" > tmp.xml
+
+#virsh define tmp.xml
+
+#rm tmp.xml
+
+# Start the VMm, if it's already running just ignore the error
+#echo -e "${lBlue}Starting the ${lCyan}$iVmName${lBlue} virtual machine${NC}"
+#virsh start $iVmName > /dev/null 2>&1
+
+
+# Configure ansible's key for communicating with the VMs... Testing only, this will
+# be taken care of by the installer in the future.
+for i in install_ha-serv1 install_ha-serv2 install_ha-serv3
+do
+ ipAddr=`virsh domifaddr $i | tail -n +3 | awk '{ print $4 }' | sed -e 's~/.*~~'`
+ m=`echo $i | sed -e 's/install_//'`
+ echo "ansible_ssh_private_key_file: .vagrant/machines/$m/libvirt/private_key" > ansible/host_vars/$ipAddr
+done
+
+exit
+
+echo -e "${lBlue}Generating the key-pair for communication with the VM${NC}"
+ssh-keygen -f ./key -t rsa -N ''
+
+mv key key.pem
+
+# Clone BashLogin.sh and add the public key to it for later use.
+echo -e "${lBlue}Creating the pre-configuration script${NC}"
+cp BashLogin.sh bash_login.sh
+echo "cat <<HERE > .ssh/authorized_keys" >> bash_login.sh
+cat key.pub >> bash_login.sh
+echo "HERE" >> bash_login.sh
+echo "chmod 400 .ssh/authorized_keys" >> bash_login.sh
+echo "rm .bash_login" >> bash_login.sh
+echo "logout" >> bash_login.sh
+rm key.pub
+
+
+
+# Get the VM's IP address
+ctr=0
+ipAddr=""
+while [ -z "$ipAddr" ];
+do
+ echo -e "${lBlue}Waiting for the VM's IP address${NC}"
+ ipAddr=`virsh domifaddr $iVmName | tail -n +3 | awk '{ print $4 }' | sed -e 's~/.*~~'`
+ sleep 2
+ if [ $ctr -eq $ipTimeout ]; then
+ echo -e "${red}Tired of waiting, please adjust the ipTimeout if the VM is slow to start${NC}"
+ exit
+ fi
+ ctr=`expr $ctr + 1`
+done
+
+echo -e "${lBlue}The IP address is: ${lCyan}$ipAddr${NC}"
+
+# Copy the pre-config file to the VM
+echo -e "${lBlue}Transfering pre-configuration script to the VM${NC}"
+scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no bash_login.sh vinstall@$ipAddr:.bash_login
+
+rm bash_login.sh
+
+# Run the pre-config file on the VM
+echo -e "${lBlue}Running the pre-configuration script on the VM${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no vinstall@$ipAddr
+
+# Make sure the VM is up-to-date
+echo -e "${lBlue}Ensure that the VM is up-to-date${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get update
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get -y upgrade
+
+# Create the docker.cfg file in the ansible tree using the VMs IP address
+echo 'DOCKER_OPTS="$DOCKER_OPTS --insecure-registry '$ipAddr':5000 -H tcp://0.0.0.0:2375 -H unix:///var/run/docker.sock --registry-mirror=http://'$ipAddr':5001"' > ansible/roles/docker/templates/docker.cfg
+
+# Install ansible on the vm, it'll be used both here and for the install
+echo -e "${lBlue}Installing ansible on the VM${NC}"
+#ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get install software-properties-common
+#ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-add-repository ppa:ansible/ansible
+#ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get update
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get -y install ansible
+
+# Copy the ansible files to the VM
+echo -e "${lBlue}Transferring the ansible directory to the VM${NC}"
+scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem -r ansible vinstall@$ipAddr:ansible
+
+# Get the GPG key for docker otherwise ansible calls break
+echo -e "${lBlue}Get the GPG key for docker to allow ansible playbooks to run successfully${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr "sudo apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D"
+
+# Bootstrap ansible
+echo -e "${lBlue}Bootstrap ansible${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr ansible/scripts/bootstrap_ansible.sh
+
+# Run the ansible script to initialize the installer environment
+echo -e "${lBlue}Run the nsible playbook for the installer${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo PYTHONUNBUFFERED=1 ansible-playbook /home/vinstall/ansible/volthainstall.yml -c local