Initial commit of the voltha installer. There are several things that
need to be cleaned up but the installer is fully functional in test
mode and creates 3 non-clustered VMs with identical voltha installs
until such time as HA is ready. Once HA is ready, the scripts will be
modified to deploy the full HA cluster.
This update partially addresses Epic VOL-6.
Made changes requested by the reviewers.
Change-Id: I083239e1f349136d2ec1e51e09391da341177076
diff --git a/install/CreateInstaller.sh b/install/CreateInstaller.sh
new file mode 100755
index 0000000..bd253b6
--- /dev/null
+++ b/install/CreateInstaller.sh
@@ -0,0 +1,189 @@
+#!/bin/bash
+
+baseImage="Ubuntu1604LTS"
+iVmName="Ubuntu1604LTS-1"
+iVmNetwork="vagrant-libvirt"
+shutdownTimeout=5
+ipTimeout=10
+
+lBlue='\033[1;34m'
+green='\033[0;32m'
+orange='\033[0;33m'
+NC='\033[0m'
+red='\033[0;31m'
+yellow='\033[1;33m'
+dGrey='\033[1;30m'
+lGrey='\033[1;37m'
+lCyan='\033[1;36m'
+
+wd=`pwd`
+
+# Validate that vagrant is installed.
+echo -e "${lBlue}Ensure that ${lCyan}vagrant${lBlue} is installed${NC}"
+vInst=`which vagrant`
+
+if [ -z "$vInst" ]; then
+ wget https://releases.hashicorp.com/vagrant/1.9.5/vagrant_1.9.5_x86_64.deb
+ sudo dpkg -i vagrant_1.8.5_x86_64.deb
+ rm vagrant_1.8.5_x86_64.deb
+fi
+unset vInst
+
+# Validate that ansible is installed
+echo -e "${lBlue}Ensure that ${lCyan}ansible${lBlue} is installed${NC}"
+aInst=`which ansible`
+
+if [ -z "$aInst" ]; then
+ sudo apt-get install software-properties-common
+ sudo apt-add-repository ppa:ansible/ansible
+ sudo apt-get update
+ sudo apt-get install ansible
+fi
+unset vInst
+
+# Ensure that the voltha VM is running so that images can be secured
+echo -e "${lBlue}Ensure that the ${lCyan}voltha VM${lBlue} is running${NC}"
+vVM=`virsh list | grep voltha_voltha`
+
+if [ -z "$vVM" ]; then
+ ./BuildVoltha.sh
+fi
+
+# Verify if this is intended to be a test environment, if so start 3 VMs
+# to emulate the production installation cluster.
+if [ $# -eq 1 -a "$1" == "test" ]; then
+ echo -e "${lBlue}Testing, create the ${lCyan}ha-serv${lBlue} VMs${NC}"
+ vagrant destroy ha-serv{1,2,3}
+ vagrant up ha-serv{1,2,3}
+ ./devSetHostList.sh
+else
+ rm -fr .test
+fi
+
+# Shut down the domain in case it's running.
+echo -e "${lBlue}Shut down the ${lCyan}$iVmName${lBlue} VM if running${NC}"
+ctr=0
+vStat=`virsh list | grep $iVmName`
+while [ ! -z "$vStat" ];
+do
+ virsh shutdown $iVmName
+ echo "Waiting for $iVmName to shut down"
+ sleep 2
+ vStat=`virsh list | grep $iVmName`
+ ctr=`expr $ctr + 1`
+ if [ $ctr -eq $shutdownTimeout ]; then
+ echo -e "${red}Tired of waiting, forcing the VM off${NC}"
+ virsh destroy $iVmName
+ vStat=`virsh list | grep $iVmName`
+ fi
+done
+
+
+# Delete the VM and ignore any errors should they occur
+echo -e "${lBlue}Undefining the ${lCyan}$iVmName${lBlue} domain${NC}"
+virsh undefine $iVmName
+
+# Remove the associated volume
+echo -e "${lBlue}Removing the ${lCyan}$iVmName.qcow2${lBlue} volume${NC}"
+virsh vol-delete "${iVmName}.qcow2" default
+
+# Clone the base vanilla ubuntu install
+echo -e "${lBlue}Cloning the ${lCyan}$baseImage.qcow2${lBlue} to ${lCyan}$iVmName.qcow2${NC}"
+virsh vol-clone "${baseImage}.qcow2" "${iVmName}.qcow2" default
+
+# Create the xml file and define the VM for virsh
+echo -e "${lBlue}Defining the ${lCyan}$iVmName${lBlue} virtual machine${NC}"
+cat vmTemplate.xml | sed -e "s/{{VMName}}/$iVmName/g" | sed -e "s/{{VMNetwork}}/$iVmNetwork/g" > tmp.xml
+
+virsh define tmp.xml
+
+rm tmp.xml
+
+# Start the VMm, if it's already running just ignore the error
+echo -e "${lBlue}Starting the ${lCyan}$iVmName${lBlue} virtual machine${NC}"
+virsh start $iVmName > /dev/null 2>&1
+
+# Generate a keypair for communicating with the VM
+echo -e "${lBlue}Generating the key-pair for communication with the VM${NC}"
+ssh-keygen -f ./key -t rsa -N ''
+
+mv key key.pem
+
+# Clone BashLogin.sh and add the public key to it for later use.
+echo -e "${lBlue}Creating the pre-configuration script${NC}"
+cp BashLogin.sh bash_login.sh
+echo "cat <<HERE > .ssh/authorized_keys" >> bash_login.sh
+cat key.pub >> bash_login.sh
+echo "HERE" >> bash_login.sh
+echo "chmod 400 .ssh/authorized_keys" >> bash_login.sh
+echo "rm .bash_login" >> bash_login.sh
+echo "logout" >> bash_login.sh
+rm key.pub
+
+
+
+# Get the VM's IP address
+ctr=0
+ipAddr=""
+while [ -z "$ipAddr" ];
+do
+ echo -e "${lBlue}Waiting for the VM's IP address${NC}"
+ ipAddr=`virsh domifaddr $iVmName | tail -n +3 | awk '{ print $4 }' | sed -e 's~/.*~~'`
+ sleep 3
+ if [ $ctr -eq $ipTimeout ]; then
+ echo -e "${red}Tired of waiting, please adjust the ipTimeout if the VM is slow to start${NC}"
+ exit
+ fi
+ ctr=`expr $ctr + 1`
+done
+
+echo -e "${lBlue}The IP address is: ${lCyan}$ipAddr${NC}"
+
+# Copy the pre-config file to the VM
+echo -e "${lBlue}Transfering pre-configuration script to the VM${NC}"
+scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no bash_login.sh vinstall@$ipAddr:.bash_login
+
+rm bash_login.sh
+
+# Run the pre-config file on the VM
+echo -e "${lBlue}Running the pre-configuration script on the VM${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no vinstall@$ipAddr
+
+# Install python which is required for ansible
+echo -e "${lBlue}Installing python${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get update
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get -y install python
+
+# Make sure the VM is up-to-date
+echo -e "${lBlue}Ensure that the VM is up-to-date${NC}"
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get update
+ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem vinstall@$ipAddr sudo apt-get -y upgrade
+
+
+
+# Copy the apt repository to the VM because it's way too slow using ansible
+#echo -e "${red}NOT COPYING${lBlue} the apt-repository to the VM, ${red}TESTING ONLY REMOVE FOR PRODUCTION${NC}"
+#echo -e "${lBlue}Copy the apt-repository to the VM${NC}"
+#scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i key.pem -r apt-mirror vinstall@$ipAddr:apt-mirror
+
+# Create the docker.cfg file in the ansible tree using the VMs IP address
+echo 'DOCKER_OPTS="$DOCKER_OPTS --insecure-registry '$ipAddr':5000 -H tcp://0.0.0.0:2375 -H unix:///var/run/docker.sock --registry-mirror=http://'$ipAddr':5001"' > ansible/roles/docker/templates/docker.cfg
+
+# Add the voltha vm's information to the ansible tree
+echo -e "${lBlue}Add the voltha vm and key to the ansible accessible hosts${NC}"
+vIpAddr=`virsh domifaddr voltha_voltha | tail -n +3 | awk '{ print $4 }' | sed -e 's~/.*~~'`
+echo "[voltha]" > ansible/hosts/voltha
+echo $vIpAddr >> ansible/hosts/voltha
+echo "ansible_ssh_private_key_file: $wd/../.vagrant/machines/voltha/libvirt/private_key" > ansible/host_vars/$vIpAddr
+
+
+# Prepare to launch the ansible playbook to configure the installer VM
+echo -e "${lBlue}Prepare to launch the ansible playbook to configure the VM${NC}"
+echo "[installer]" > ansible/hosts/installer
+echo "$ipAddr" >> ansible/hosts/installer
+echo "ansible_ssh_private_key_file: $wd/key.pem" > ansible/host_vars/$ipAddr
+
+# Launch the ansible playbook
+echo -e "${lBlue}Launching the ansible playbook${NC}"
+ansible-playbook ansible/volthainstall.yml -i ansible/hosts/installer
+ansible-playbook ansible/volthainstall.yml -i ansible/hosts/voltha