Note: These steps have been tested and confirmed on
The purpose of this file is to document the intial packages that need to be installed on a Linux system so that you can execute the basic installation procedure documented in BUILD.md
The following steps can be executed in order and have been tested (and retested) on various Linux VMs. If you find any issues with the steps below, please update this file accordingly.
Regarding Linux VMs, I found that I needed to allocate at lest 6GB of RAM to my VM, otherwise I would run out of memory while fetching the docker images.
October, 2016 - Minimum Linux VM requirements
| Cores | RAM | Disk |
|---|---|---|
| 2 | 6GB | 20GB |
To begin with, please make sure you machine is up to date with the latest packages and that you have python-pip installed.
$ sudo apt update $ sudo apt upgrade --yes $ sudo apt install python-pip $ sudo pip install --upgrade pip
Next, install the following base packages that will be needed to successfully install and compile the virtualenv.
$ sudo apt install git --yes $ sudo apt install make --yes $ sudo apt install virtualenv --yes $ sudo apt install curl --yes $ sudo apt install jq --yes $ sudo apt install libssl-dev --yes $ sudo apt install libffi-dev --yes $ sudo apt install libpcap-dev --yes
Python 2.x is needed in the native environment for (at least) the repo tool (installed below).
And, Python-dev is needed when the pip packages are installed while setting up the virtualenv.
To install python 2.X use the following command.
$ sudo apt install python --yes $ sudo apt install python-dev --yes
Docker engine and docker tools (compose) should get installed. These tools are used, in case that user doesn't want to use vagrant and wants to run the code on local machine.
$ sudo apt-get update $ sudo apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D $ sudo apt-add-repository 'deb https://apt.dockerproject.org/repo ubuntu-xenial main' $ sudo apt-get update $ apt-cache policy docker-engine
This could be a sample of the output of the latest command.
docker-engine:
Installed: (none)
Candidate: 1.11.1-0~xenial
Version table:
1.11.1-0~xenial 500
500 https://apt.dockerproject.org/repo ubuntu-xenial/main amd64 Packages
1.11.0-0~xenial 500
500 https://apt.dockerproject.org/repo ubuntu-xenial/main amd64 Packages
We continue with docker engine installation.
$ sudo apt-get install -y docker-engine $ sudo systemctl status docker
This should be sample output following the latest command.
docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2016-05-01 06:53:52 CDT; 1 weeks 3 days ago
Docs: https://docs.docker.com
Main PID: 749 (docker)
We should add username to docker group to void typing sudo repeatedly.
$ sudo usermod -aG docker $(whoami)
You will need to log out and back in for change to take affect.
Docker tools need to get installed as well.
$ sudo curl -L "https://github.com/docker/compose/releases/download/1.10.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose $ sudo chmod +x /usr/local/bin/docker-compose
To test docker-compose installation:
$ docker-compose --version
Should output this:
docker-compose version: 1.10.0
There are a couple of different ways to use Vagrant, the following steps assume that you install VirtualBox.
$ sudo sh -c "/bin/echo 'deb http://download.virtualbox.org/virtualbox/debian xenial contrib' >> /etc/apt/sources.list"
$ wget https://www.virtualbox.org/download/oracle_vbox_2016.asc $ sudo apt-key add oracle_vbox_2016.asc
$ wget https://www.virtualbox.org/download/oracle_vbox.asc $ sudo apt-key add oracle_vbox.asc
VirtualBox-5.1 is the latest release of VirtualBox, yet it is not compatible with the Ubuntu 16.04 default version of vagrant. The best release of VirtualBox to install is 5.0.
Here is the note from vagrant...
$ sudo apt update $ sudo apt install virtualbox-5.0 --yes $ sudo apt install vagrant
Install the Google repo tool for working with the VOLTHA repository. Installing from Google APIs (googleapis below) seems to be a step that is blocked by many corporate firewalls. An alternative is to install repo from the apt packages.
$ sudo apt install repo --yes
Note: The Ubuntu repo package, when executed, may complain about being out of date. Follow the upgrade commands that repo puts to the standard out.
Some older linux distributions do not have repo available. If you cannot apt install repo, then follow the commands below to fetch repo from the Google site. Skip this collection of steps if you have installed repo with apt.
$ mkdir ~/bin $ PATH=~/bin:$PATH $ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo $ chmod a+x ~/bin/repo
Repo requires that at least your git config is setup. Set it up for your user.name and user.email.
$ git config --global user.email "<email address>" $ git config --global user.name "Firstname Lastname"
$ mkdir cord $ cd cord $ repo init -u https://gerrit.opencord.org/manifest $ repo sync
$ cd incubator/voltha $ voltha$ . ./env.sh
The last step above the sources the virtualenv environment should pass. If it does not and exits because of an error, see the commands below.
When you start with a clean Linux system, the first time virtualenv is setup it installs a number of pip packages. If the base packages on the machine are not present for the pip packages to be installed correctly, then the virtualenv may be in a half-configured state.
If you find yourself in this state, the error should be addressed, the virtualenv directory should be deleted, and the environment should be sourced again.
voltha$ rm -rf venv-linux < Fix virtualenv environment > voltha$ . ./env.sh
Thes commands are meant to be identical to the commands documented in BUILD.md. At this point you are finished with the basic Linux configuration and should be able to start working with VOLTHA.
cd incubator/voltha vagrant up # when you do this for the first time, this will take considerable time vagrant ssh # the rest to be executed inside the vagrant VM cd /voltha . env.sh make fetch make
If you are running the former pyofagent, then you will need the following packages installed in your native environment.
$ sudo apt install mininet --yes $ sudo apt install netifaces --yes