M11 - Verify Unicast Access

Test Objective

• Purpose of this test is to verify OLT and ONU can pass double tagged traffic

Test Configuration

• Test Setup as shown in Section – 7
• Maple OLT and ONU is activated using VOLTHA
• Provision HSIA/unicast service on the OLT and connected ONU from VOLTHA

Test Procedure

• On Spirent, configure double tagged traffic in downstream direction (1025,1025)
• On Spirent, send untagged traffic in upstream direction
• On the both ports capture traffic and verify the stream

Pass/Fail Criteria

• Upstream:
  • Traffic coming out of OLT is double tagged 1025 ,1025
• Downstream:
  • OLT will strip outer tag 1025 and send single CVID traffic to ONT