install/installer.sh

#!/bin/bash

lBlue='\033[1;34m'
green='\033[0;32m'
orange='\033[0;33m'
NC='\033[0m'
red='\033[0;31m'
yellow='\033[1;33m'
dGrey='\033[1;30m'
lGrey='\033[1;37m'
lCyan='\033[1;36m'
wd=`pwd`


# Clean up any prior executions
rm -fr .keys
rm -f ansible/hosts/cluster
rm -f ansible/host_vars/*

# Source the configuration information
. install.cfg

if [ -z "$hosts" ]; then
	echo -e "${red}No hosts specifed!!${NC}"
	echo -e "${red}Did you forget to update the config file ${yellow}installer.cfg${red}?${NC}"
	exit
fi

# Create the key directory
mkdir .keys

# Create the host list
echo "[cluster]" > ansible/hosts/cluster

# Silence SSH and avoid prompts
rm -f ~/.ssh/config
echo "Host *" > ~/.ssh/config
echo "	StrictHostKeyChecking no" >> ~/.ssh/config
echo "	UserKnownHostsFile /dev/null" >> ~/.ssh/config

sudo cp ~/.ssh/config /root/.ssh/config

for i in $hosts
do
	# Generate the key for the host
	echo -e "${lBlue}Generating the key-pair for communication with host ${yellow}$i${NC}"
	ssh-keygen -f ./$i -t rsa -N ''
	mv $i .keys

	# Generate the pre-configuration script
	echo -e "${lBlue}Creating the pre-configuration script${NC}"
	cat <<HERE > bash_login.sh
#!/bin/bash
	echo "voltha ALL=(ALL) NOPASSWD:ALL" > tmp
	sudo chown root.root tmp
	sudo mv tmp /etc/sudoers.d/voltha
	sudo mkdir /home/voltha
	mkdir voltha_ssh
	ssh-keygen -f ~/voltha_ssh/id_rsa -t rsa -N ''
	sudo mv voltha_ssh /home/voltha/.ssh
HERE
	echo "sudo cat <<HERE > /home/voltha/.ssh/authorized_keys" >> bash_login.sh
	cat $i.pub >> bash_login.sh
	echo "HERE" >> bash_login.sh
	echo "chmod 400 /home/voltha/.ssh/authorized_keys" >> bash_login.sh
	echo "sudo useradd -b /home -d /home/voltha voltha -s /bin/bash" >> bash_login.sh
	echo "sudo chown -R voltha.voltha /home/voltha" >> bash_login.sh
	echo "echo 'voltha:voltha' | sudo chpasswd" >> bash_login.sh
	echo "rm .bash_login" >> bash_login.sh
	echo "logout" >> bash_login.sh
	rm $i.pub
	# Copy the pre-config file to the VM
	echo -e "${lBlue}Transfering pre-configuration script to ${yellow}$i${NC}"
	if [ -d ".test" ]; then
		echo -e "${red}Test mode set!!${lBlue} Using pre-populated ssh key for ${yellow}$i${NC}"
		scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .test/$i bash_login.sh $iUser@$i:.bash_login
	else
		scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no bash_login.sh $iUser@$i:.bash_login
	fi
	rm bash_login.sh

	# Run the pre-config file on the VM
	echo -e "${lBlue}Running the pre-configuration script on ${yellow}$i${NC}"
	if [ -d ".test" ]; then
		echo -e "${red}Test mode set!!${lBlue} Using pre-populated ssh key for ${yellow}$i${NC}"
		ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .test/$i $iUser@$i
	else
		ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $iUser@$i
	fi

	# Configure ansible and ssh for silent operation
	echo -e "${lBlue}Configuring ansible${NC}"
	echo $i >> ansible/hosts/cluster
	echo "ansible_ssh_private_key_file: $wd/.keys/$i" > ansible/host_vars/$i

	# Create the tunnel to the registry to allow pulls from localhost
	echo -e "${lBlue}Creating a secure shell tunnel to the registry for ${yellow}$i${NC}"
	ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i -f voltha@$i -R 5000:localhost:5000 -N
	
done
# Add the dependent software list to the cluster variables
echo -e "${lBlue}Setting up dependent software${NC}"
# Delete any grub updates since the boot disk is almost
# guaranteed not to be the same device as the installer.
mkdir grub_updates
sudo mv deb_files/*grub* grub_updates
# Sort the packages in dependency order to get rid of scary non-errors
# that are issued by ansible.
#echo -e "${lBlue}Dependency sorting dependent software${NC}"
#./sort_packages.sh
#echo "deb_files:" >> ansible/group_vars/all
#for i in `cat sortedDebs.txt`
#do
#echo "  - $i" >> ansible/group_vars/all
#done

# Make sure the ssh keys propagate to all hosts allowing passwordless logins between them
echo -e "${lBlue}Propagating ssh keys${NC}"
cp -r .keys ansible/roles/cluster-host/files

# Install python on all the 3 servers since python is required for
for i in $hosts
do
	echo -e "${lBlue}Installing ${lCyan}Python${lBlue}${NC}"
	scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i -r python-deb voltha@$i:.
	ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i  voltha@$i "sudo dpkg -i /home/voltha/python-deb/*minimal*"
	ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i  voltha@$i sudo dpkg -i -R /home/voltha/python-deb
	ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i  voltha@$i rm -fr python-deb

done


# Running ansible
echo -e "${lBlue}Running ansible${NC}"
cp ansible/ansible.cfg .ansible.cfg
ansible-playbook ansible/voltha.yml -i ansible/hosts/cluster

# Now all 3 servers need to be rebooted because of software installs.
# Reboot them and wait patiently until they all come back.
# Note this destroys the registry tunnel wich is no longer needed.
hList=""
for i in $hosts
do
	echo -e "${lBlue}Rebooting cluster hosts${NC}"
	ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i  voltha@$i sudo telinit 6
	hList="$i $hList"
done

# Give the hosts time to shut down so that pings stop working or the
# script just falls through the next loop and the rest fails.
echo -e "${lBlue}Waiting for shutdown${NC}"
sleep 5


while [ ! -z "$hList" ];
do
	# Attempt to ping the VMs on the list one by one.
	echo -e "${lBlue}Waiting for hosts to reboot ${yellow}$hList${NC}"
	for i in $hList
	do
		ping -q -c 1 $i > /dev/null 2>&1
		ret=$?
		if [ $ret -eq 0 ]; then
			ipExpr=`echo $i | sed -e "s/\./[.]/g"`
			hList=`echo $hList | sed -e "s/$ipExpr//" | sed -e "s/^ //" | sed -e "s/ $//"`
		fi
	done
	
done

# Now initialize the the docker swarm cluster with managers.
# The first server needs to be the primary swarm manager
# the other nodes are backup mangers that join the swarm.
# In the future, worker nodes will likely be added.

echo "[swarm-master]" > ansible/hosts/swarm-master
echo "[swarm-master-backup]" > ansible/hosts/swarm-master-backup

ctr=1
for i in $hosts
do
        if [ $ctr -eq 1 ]; then
                echo  $i >> ansible/hosts/swarm-master
		echo "swarm_master_addr: \"$i\"" >> ansible/group_vars/all
		ctr=0
        else
                echo  $i >> ansible/hosts/swarm-master-backup
        fi
done
ansible-playbook ansible/swarm.yml -i ansible/hosts/swarm-master
ansible-playbook ansible/swarm.yml -i ansible/hosts/swarm-master-backup
ansible-playbook ansible/voltha.yml -i ansible/hosts/swarm-master