Third attempt at adding client configuration for VPN Service
diff --git a/Makefile b/Makefile
index 2b55526..6a44c26 100644
--- a/Makefile
+++ b/Makefile
@@ -1,55 +1,192 @@
-NAME = xos
-SPECFILE = $(NAME).spec
-VERSION = $(shell rpm -q --specfile $(SPECFILE) --qf '%{VERSION}\n' | head -n 1)
-RELEASE = $(shell rpm -q --specfile $(SPECFILE) --qf '%{RELEASE}\n' | head -n 1)
+# Makefile for Sphinx documentation
+#
-UPLOAD_SLICE=princeton_planetstack
+# You can set these variables from the command line.
+SPHINXOPTS =
+SPHINXBUILD = sphinx-build
+PAPER =
+BUILDDIR = build
-PWD = $(shell pwd)
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
-dist rpm: $(NAME)-$(VERSION)-$(RELEASE).rpm
+# Internal variables.
+PAPEROPT_a4 = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-$(NAME)-$(VERSION).tar.gz:
- mkdir -p $(NAME)-$(VERSION)
- rsync -av --exclude=.svn --exclude=.git --exclude=*.tar.gz --exclude=*.rpm --exclude=__history --exclude=$(NAME)-$(VERSION)/ ./ $(NAME)-$(VERSION)
- tar -czf $@ $(NAME)-$(VERSION)
- rm -fr $(NAME)-$(VERSION)
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext
-$(NAME)-$(VERSION)-$(RELEASE).rpm: $(NAME)-$(VERSION).tar.gz
- mkdir -p build
- rpmbuild -bb --define '_sourcedir $(PWD)' \
- --define '_builddir $(PWD)/build' \
- --define '_srcrpmdir $(PWD)' \
- --define '_rpmdir $(PWD)' \
- --define '_build_name_fmt %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm' \
- $(SPECFILE)
-
-srpm: $(NAME)-$(VERSION)-$(RELEASE).src.rpm
-$(NAME)-$(VERSION)-$(RELEASE).src.rpm: $(NAME)-$(VERSION).tar.gz
- rpmbuild -bs --define "_sourcedir $$(pwd)" \
- --define "_srcrpmdir $$(pwd)" \
- $(SPECFILE)
+help:
+ @echo "Please use \`make <target>' where <target> is one of"
+ @echo " html to make standalone HTML files"
+ @echo " dirhtml to make HTML files named index.html in directories"
+ @echo " singlehtml to make a single large HTML file"
+ @echo " pickle to make pickle files"
+ @echo " json to make JSON files"
+ @echo " htmlhelp to make HTML files and a HTML help project"
+ @echo " qthelp to make HTML files and a qthelp project"
+ @echo " applehelp to make an Apple Help Book"
+ @echo " devhelp to make HTML files and a Devhelp project"
+ @echo " epub to make an epub"
+ @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+ @echo " latexpdf to make LaTeX files and run them through pdflatex"
+ @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+ @echo " text to make text files"
+ @echo " man to make manual pages"
+ @echo " texinfo to make Texinfo files"
+ @echo " info to make Texinfo files and run them through makeinfo"
+ @echo " gettext to make PO message catalogs"
+ @echo " changes to make an overview of all changed/added/deprecated items"
+ @echo " xml to make Docutils-native XML files"
+ @echo " pseudoxml to make pseudoxml-XML files for display purposes"
+ @echo " linkcheck to check all external links for integrity"
+ @echo " doctest to run all doctests embedded in the documentation (if enabled)"
+ @echo " coverage to run coverage check of the documentation (if enabled)"
clean:
- rm -f $(NAME)-$(VERSION).tar.gz $(NAME)-$(VERSION)-$(RELEASE).src.rpm $(NAME)-$(VERSION)-$(RELEASE).noarch.rpm
- rm -rf build
+ rm -rf $(BUILDDIR)/*
-upload: $(NAME)-$(VERSION)-$(RELEASE).rpm
-ifndef UPLOAD_HOST
- $(error please specify UPLOAD_HOST=<hostname> on make command line)
-endif
- scp $(NAME)-$(VERSION)-$(RELEASE).x86_64.rpm $(UPLOAD_SLICE)@$(UPLOAD_HOST):/root/
+html:
+ $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+ @echo
+ @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-install: upload
- ssh $(UPLOAD_SLICE)@$(UPLOAD_HOST) yum -y install gcc graphviz-devel graphviz-python postgresql postgresql-server python-pip python-psycopg2 libxslt-devel python-httplib2 GeoIP
- ssh $(UPLOAD_SLICE)@$(UPLOAD_HOST) rpm --install --upgrade --replacefiles --replacepkgs /root/$(NAME)-$(VERSION)-$(RELEASE).x86_64.rpm
- scp /opt/planetstack/hpc_wizard/bigquery_credentials.dat /opt/planetstack/hpc_wizard/client_secrets.json $(UPLOAD_SLICE)@$(UPLOAD_HOST):/opt/planetstack/hpc_wizard/
+dirhtml:
+ $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+ @echo
+ @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-install-keys:
-ifndef UPLOAD_HOST
- $(error please specify UPLOAD_HOST=<hostname> on make command line)
-endif
- scp /opt/planetstack/hpc_wizard/bigquery_credentials.dat /opt/planetstack/hpc_wizard/client_secrets.json $(UPLOAD_SLICE)@$(UPLOAD_HOST):/opt/planetstack/hpc_wizard/
+singlehtml:
+ $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+ @echo
+ @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-.PHONY: dist
+pickle:
+ $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+ @echo
+ @echo "Build finished; now you can process the pickle files."
+json:
+ $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+ @echo
+ @echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+ $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+ @echo
+ @echo "Build finished; now you can run HTML Help Workshop with the" \
+ ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+ $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+ @echo
+ @echo "Build finished; now you can run "qcollectiongenerator" with the" \
+ ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+ @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/XOS.qhcp"
+ @echo "To view the help file:"
+ @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/XOS.qhc"
+
+applehelp:
+ $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
+ @echo
+ @echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
+ @echo "N.B. You won't be able to view it unless you put it in" \
+ "~/Library/Documentation/Help or install it in your application" \
+ "bundle."
+
+devhelp:
+ $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+ @echo
+ @echo "Build finished."
+ @echo "To view the help file:"
+ @echo "# mkdir -p $$HOME/.local/share/devhelp/XOS"
+ @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/XOS"
+ @echo "# devhelp"
+
+epub:
+ $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+ @echo
+ @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+ @echo
+ @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+ @echo "Run \`make' in that directory to run these through (pdf)latex" \
+ "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+ @echo "Running LaTeX files through pdflatex..."
+ $(MAKE) -C $(BUILDDIR)/latex all-pdf
+ @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+ @echo "Running LaTeX files through platex and dvipdfmx..."
+ $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+ @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+ $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+ @echo
+ @echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+ $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+ @echo
+ @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+ $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+ @echo
+ @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+ @echo "Run \`make' in that directory to run these through makeinfo" \
+ "(use \`make info' here to do that automatically)."
+
+info:
+ $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+ @echo "Running Texinfo files through makeinfo..."
+ make -C $(BUILDDIR)/texinfo info
+ @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+ $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+ @echo
+ @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+ $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+ @echo
+ @echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+ $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+ @echo
+ @echo "Link check complete; look for any errors in the above output " \
+ "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+ $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+ @echo "Testing of doctests in the sources finished, look at the " \
+ "results in $(BUILDDIR)/doctest/output.txt."
+
+coverage:
+ $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
+ @echo "Testing of coverage in the sources finished, look at the " \
+ "results in $(BUILDDIR)/coverage/python.txt."
+
+xml:
+ $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+ @echo
+ @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+ $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+ @echo
+ @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/xos/observers/vpn/steps/sync_vpntenant.py b/xos/observers/vpn/steps/sync_vpntenant.py
index 499f74d..b3f00e4 100644
--- a/xos/observers/vpn/steps/sync_vpntenant.py
+++ b/xos/observers/vpn/steps/sync_vpntenant.py
@@ -22,7 +22,7 @@
objs = VPNTenant.get_tenant_objects().filter(
Q(enacted__lt=F('updated')) | Q(enacted=None), Q(lazy_blocked=False))
for tenant in objs:
- tenant.client_conf = generate_client_conf(tenant)
+ tenant.client_conf = this.generate_client_conf(tenant)
else:
objs = VPNTenant.get_deleted_tenant_objects()