diff --git a/Makefile b/Makefile
index 6a44c26..2b55526 100644
--- a/Makefile
+++ b/Makefile
@@ -1,192 +1,55 @@
-# Makefile for Sphinx documentation
-#
+NAME = xos
+SPECFILE = $(NAME).spec
+VERSION = $(shell rpm -q --specfile $(SPECFILE) --qf '%{VERSION}\n' | head -n 1)
+RELEASE = $(shell rpm -q --specfile $(SPECFILE) --qf '%{RELEASE}\n' | head -n 1)
 
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = build
+UPLOAD_SLICE=princeton_planetstack
 
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
+PWD = $(shell pwd)
 
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+dist rpm: $(NAME)-$(VERSION)-$(RELEASE).rpm
 
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext
+$(NAME)-$(VERSION).tar.gz:
+	mkdir -p $(NAME)-$(VERSION)
+	rsync -av --exclude=.svn --exclude=.git --exclude=*.tar.gz --exclude=*.rpm --exclude=__history --exclude=$(NAME)-$(VERSION)/ ./ $(NAME)-$(VERSION)
+	tar -czf $@ $(NAME)-$(VERSION)
+	rm -fr $(NAME)-$(VERSION)
 
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  applehelp  to make an Apple Help Book"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-	@echo "  coverage   to run coverage check of the documentation (if enabled)"
+$(NAME)-$(VERSION)-$(RELEASE).rpm: $(NAME)-$(VERSION).tar.gz
+	mkdir -p build
+	rpmbuild -bb --define '_sourcedir $(PWD)' \
+                --define '_builddir $(PWD)/build' \
+                --define '_srcrpmdir $(PWD)' \
+                --define '_rpmdir $(PWD)' \
+                --define '_build_name_fmt %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm' \
+                $(SPECFILE)
+
+srpm: $(NAME)-$(VERSION)-$(RELEASE).src.rpm
+$(NAME)-$(VERSION)-$(RELEASE).src.rpm: $(NAME)-$(VERSION).tar.gz
+	rpmbuild -bs --define "_sourcedir $$(pwd)" \
+                --define "_srcrpmdir $$(pwd)" \
+                $(SPECFILE)
 
 clean:
-	rm -rf $(BUILDDIR)/*
+	rm -f $(NAME)-$(VERSION).tar.gz $(NAME)-$(VERSION)-$(RELEASE).src.rpm $(NAME)-$(VERSION)-$(RELEASE).noarch.rpm
+	rm -rf build
 
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+upload: $(NAME)-$(VERSION)-$(RELEASE).rpm
+ifndef UPLOAD_HOST
+	$(error please specify UPLOAD_HOST=<hostname> on make command line)
+endif
+	scp $(NAME)-$(VERSION)-$(RELEASE).x86_64.rpm $(UPLOAD_SLICE)@$(UPLOAD_HOST):/root/
 
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+install: upload
+	ssh $(UPLOAD_SLICE)@$(UPLOAD_HOST) yum -y install gcc graphviz-devel graphviz-python postgresql postgresql-server python-pip python-psycopg2 libxslt-devel python-httplib2 GeoIP
+	ssh $(UPLOAD_SLICE)@$(UPLOAD_HOST) rpm --install --upgrade --replacefiles --replacepkgs /root/$(NAME)-$(VERSION)-$(RELEASE).x86_64.rpm   
+	scp /opt/planetstack/hpc_wizard/bigquery_credentials.dat /opt/planetstack/hpc_wizard/client_secrets.json $(UPLOAD_SLICE)@$(UPLOAD_HOST):/opt/planetstack/hpc_wizard/ 
 
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+install-keys:
+ifndef UPLOAD_HOST
+	$(error please specify UPLOAD_HOST=<hostname> on make command line)
+endif
+	scp /opt/planetstack/hpc_wizard/bigquery_credentials.dat /opt/planetstack/hpc_wizard/client_secrets.json $(UPLOAD_SLICE)@$(UPLOAD_HOST):/opt/planetstack/hpc_wizard/
 
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
+.PHONY: dist
 
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/XOS.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/XOS.qhc"
-
-applehelp:
-	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-	@echo
-	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-	@echo "N.B. You won't be able to view it unless you put it in" \
-	      "~/Library/Documentation/Help or install it in your application" \
-	      "bundle."
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/XOS"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/XOS"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-coverage:
-	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-	@echo "Testing of coverage in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/coverage/python.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."