developer/aiab.rst - aether-docs - Gitiles

 .. vim: syntax=rst

 Setting Up Aether-in-a-Box
 ==========================

 Aether-in-a-Box (AiaB) provides an easy way to deploy Aether's SD-CORE and ROC
 components, and then run basic tests to validate the installation.
 This guide describes the steps to set up AiaB.

 AiaB can be set up with a 4G or 5G SD-CORE.  In either case, SD-CORE configuration
 can be done with or without the ROC.  The ROC
 provides an interactive GUI for examining and changing the configuration, and is used to
 manage the production Aether; it can be deployed to test the integration between
 ROC and SD-CORE.  If the ROC is not deployed, a simple tool called SimApp
 is used to configure the required state in SD-CORE for testing core functionality.

 Helm charts are the primary method of installing the SD-CORE and ROC resources.
 AiaB offers a great deal of flexibility regarding which Helm chart versions to install:

 * Local definitions of charts (for testing Helm chart changes)
 * Latest published charts (for deploying a development version of Aether)
 * Specified versions of charts (for deploying a specific Aether release)

 AiaB can be run on a bare metal machine or VM.  System prerequisites:

 * Ubuntu 18.04 clean install
 * Kernel 4.15 or later
 * Haswell CPU or newer
 * At least 4 CPUs and 12GB RAM
 * Ability to run "sudo" without a password.  Due to this requirement, AiaB is most suited to disposable environments like a VM or a `CloudLab <https://cloudlab.us>`_ machine.

 Clone Repositories
 ------------------

 To initialize the AiaB environment, first clone the following repository::

     cd ~
     git clone "https://gerrit.opencord.org/aether-in-a-box"

 If you are going to install AiaB using published Helm charts, you can proceed to the
 next section.

 If you wish to install from local Helm charts, clone these additional repositories::

     mkdir -p ~/cord
     cd ~/cord
     git clone "https://gerrit.opencord.org/sdcore-helm-charts"
     git clone "https://gerrit.opencord.org/roc-helm-charts"

 Now change to *~/aether-in-a-box* directory.

 Installing the ROC
 ------------------

 Note that you must install the ROC *before* installing SD-CORE.
 If you are not using the ROC to configure SD-CORE, you can skip this step.

 First choose whether you will install the 4G or 5G SD-CORE.  To install the ROC to
 configure the 4G SD-CORE::

     make roc-4g-models

 To install the ROC to configure the 5G SD-CORE::

     make roc-5g-models

 By default the above commands install the ROC from the local charts in the Git repos cloned
 earlier.  In order to install the ROC using the latest published charts, add *CHARTS=latest*
 to the command, e.g.,::

     CHARTS=latest make roc-4g-models

 To install the Aether 2.0 release, add *CHARTS=release-2.0*::

     CHARTS=release-2.0 make roc-4g-models

 The ROC has successfully initialized when you see output like this::

     echo "ONOS CLI pod: pod/onos-cli-5b947f8f6-4r5nm"
     ONOS CLI pod: pod/onos-cli-5b947f8f6-4r5nm
     until kubectl -n aether-roc exec pod/onos-cli-5b947f8f6-4r5nm -- \
         curl -s -f -L -X PATCH "http://aether-roc-api:8181/aether-roc-api" \
         --header 'Content-Type: application/json' \
         --data-raw "$(cat /root/aether-in-a-box//roc-5g-models.json)"; do sleep 5; done
     command terminated with exit code 22
     command terminated with exit code 22
     command terminated with exit code 22
     "9513ea10-883d-11ec-84bf-721e388172cd"

 Don't worry if you see a few lines of *command terminated with exit code 22*; that command is trying to
 load the ROC models, and the message appears if the ROC isn't ready yet.  However if you see that message
 more than 10 times then something is probably wrong with the ROC or its models.

 Start the 4G SD-CORE
 --------------------

 If you are installing the 5G SD-CORE, you can skip this step.

 To deploy the 4G SD-CORE and run a simple ping test::

     make test

 By default the above commands install the 4G SD-CORE from the local charts in the Git repos cloned
 earlier.  In order to install the SD-CORE using the latest published charts, add *CHARTS=latest*
 to the command, e.g.,::

     CHARTS=latest make test

 To install the Aether 2.0 release, add *CHARTS=release-2.0*::

     CHARTS=release-2.0 make test

 Start the 5G SD-CORE
 --------------------

 If you have already installed the 4G SD-CORE, you must skip this step.  Only one version of
 the SD-CORE can be installed at a time.

 To deploy the 5G SD-CORE and run a test with gNBSim that performs Registration + UE-initiated
 PDU Session Establishment + sends User Data packets::

     make 5g-test

 By default the above commands install the 5G SD-CORE from the local charts in the Git repos cloned
 earlier.  In order to install the SD-CORE using the latest published charts, add *CHARTS=latest*
 to the command, e.g.,::

     CHARTS=latest make 5g-test

 To install the Aether 2.0 release, add *CHARTS=release-2.0*::

     CHARTS=release-2.0 make 5gc

 NOTE: The *5g-test* target is not supported in Aether-1.6, but you can use the *5gc* target
 to build the 5G core.

 To change the behavior of the test run by gNBSim, change the contents of *gnb.conf*
 in *sd-core-5g-values.yaml*.  Consult the
 `gNBSim documentation <https://docs.sd-core.opennetworking.org/master/developer/gnbsim.html>`_ for more information.

 Exploring AiaB
 --------------

 The *kubectl* tool is the best way to get familiar with the pods and other Kubernetes objects installed by AiaB.
 The SD-CORE services, UPF, and simulated edge devices run in the *omec* namespace, while the ROC is running
 in the *aether-roc* namespace.

 The ROC GUI is available on port 31194 on the host running AiaB.

 Cleanup
 -------

 The first time you build AiaB, it takes a while because it sets up the Kubernetes cluster.
 Subsequent builds will be much faster if you follow these steps to clean up the Helm charts without
 destroying the Kubernetes cluster.

 * Clean up the 4G SD-CORE: *make reset-test*
 * Reset the 4G UE / eNB in order to re-run the 4G test: *make reset-ue*
 * Clean up the 5G SD-CORE: *make reset-5g-test*
 * Clean up the ROC: *make roc-clean*

 It's normal for the above commands to take a minute or two to complete.

 As an example, suppose that you want to test the 4G SD-CORE with the ROC, and then the 5G SD-CORE
 with the ROC.  You could run these commands::

     CHARTS=latest make roc-4g-models   # Install ROC with 4G configuration
     CHARTS=latest make test            # Install 4G SD-CORE and run ping test
     make reset-test
     make roc-clean
     CHARTS=latest make roc-5g-models   # Install ROC with 5G configuration
     CHARTS=latest make 5g-test         # Install 5G SD-CORE and run gNB Sim test
     make reset-5g-test
     make roc-clean

 Developer Loop
 --------------

 Suppose you wish to test a new build of a 5G SD-CORE services. You can deploy custom images
 by editing `~/aether-in-a-box/sd-core-5g-values.yaml`, for example::

     omec-control-plane:
         images:
             tags:
                 webui: registry.aetherproject.org/omecproject/5gc-webui:onf-release3.0.5-roc-935305f
             pullPolicy: IfNotPresent

 To upgrade a running 5G SD-CORE with the new image, or to deploy the 5G SD-CORE with the image::

     make reset-5g-test; make 5g-test

 Troubleshooting / Known Issues
 ------------------------------

 If you suspect a problem, first verify that all pods are in Running state::

     kubectl -n omec get pods
     kubectl -n aether-roc get pods

 4G Test Fails
 ^^^^^^^^^^^^^
 Occasionally *make test* (for 4G) fails for unknown reasons; this is true regardless of which Helm charts are used.
 If this happens, first try recreating the simulated UE / eNB and re-running the test as follows::

     make reset-ue
     make test

 If that does not work, try cleaning up AiaB as described above and re-building it.

 If *make test* fails consistently, check whether the configuration has been pushed to the SD-CORE::

     kubectl -n omec logs config4g-0 | grep "Successfully"

 You should see that a device group and slice has been pushed::

     [INFO][WebUI][CONFIG] Successfully posted message for device group 4g-oaisim-user to main config thread
     [INFO][WebUI][CONFIG] Successfully posted message for slice default to main config thread

 Then tail the *config4g-0* log and make sure that the configuration has been successfully pushed to all
 SD-CORE components.
	.. vim: syntax=rst

	Setting Up Aether-in-a-Box
	==========================

	Aether-in-a-Box (AiaB) provides an easy way to deploy Aether's SD-CORE and ROC
	components, and then run basic tests to validate the installation.
	This guide describes the steps to set up AiaB.

	AiaB can be set up with a 4G or 5G SD-CORE. In either case, SD-CORE configuration
	can be done with or without the ROC. The ROC
	provides an interactive GUI for examining and changing the configuration, and is used to
	manage the production Aether; it can be deployed to test the integration between
	ROC and SD-CORE. If the ROC is not deployed, a simple tool called SimApp
	is used to configure the required state in SD-CORE for testing core functionality.

	Helm charts are the primary method of installing the SD-CORE and ROC resources.
	AiaB offers a great deal of flexibility regarding which Helm chart versions to install:

	* Local definitions of charts (for testing Helm chart changes)
	* Latest published charts (for deploying a development version of Aether)
	* Specified versions of charts (for deploying a specific Aether release)

	AiaB can be run on a bare metal machine or VM. System prerequisites:

	* Ubuntu 18.04 clean install
	* Kernel 4.15 or later
	* Haswell CPU or newer
	* At least 4 CPUs and 12GB RAM
	* Ability to run "sudo" without a password. Due to this requirement, AiaB is most suited to disposable environments like a VM or a `CloudLab <https://cloudlab.us>`_ machine.

	Clone Repositories
	------------------

	To initialize the AiaB environment, first clone the following repository::

	cd ~
	git clone "https://gerrit.opencord.org/aether-in-a-box"

	If you are going to install AiaB using published Helm charts, you can proceed to the
	next section.

	If you wish to install from local Helm charts, clone these additional repositories::

	mkdir -p ~/cord
	cd ~/cord
	git clone "https://gerrit.opencord.org/sdcore-helm-charts"
	git clone "https://gerrit.opencord.org/roc-helm-charts"

	Now change to ~/aether-in-a-box directory.

	Installing the ROC
	------------------

	Note that you must install the ROC before installing SD-CORE.
	If you are not using the ROC to configure SD-CORE, you can skip this step.

	First choose whether you will install the 4G or 5G SD-CORE. To install the ROC to
	configure the 4G SD-CORE::

	make roc-4g-models

	To install the ROC to configure the 5G SD-CORE::

	make roc-5g-models

	By default the above commands install the ROC from the local charts in the Git repos cloned
	earlier. In order to install the ROC using the latest published charts, add CHARTS=latest
	to the command, e.g.,::

	CHARTS=latest make roc-4g-models

	To install the Aether 2.0 release, add CHARTS=release-2.0::

	CHARTS=release-2.0 make roc-4g-models

	The ROC has successfully initialized when you see output like this::

	echo "ONOS CLI pod: pod/onos-cli-5b947f8f6-4r5nm"
	ONOS CLI pod: pod/onos-cli-5b947f8f6-4r5nm
	until kubectl -n aether-roc exec pod/onos-cli-5b947f8f6-4r5nm -- \
	curl -s -f -L -X PATCH "http://aether-roc-api:8181/aether-roc-api" \
	--header 'Content-Type: application/json' \
	--data-raw "$(cat /root/aether-in-a-box//roc-5g-models.json)"; do sleep 5; done
	command terminated with exit code 22
	command terminated with exit code 22
	command terminated with exit code 22
	"9513ea10-883d-11ec-84bf-721e388172cd"

	Don't worry if you see a few lines of command terminated with exit code 22; that command is trying to
	load the ROC models, and the message appears if the ROC isn't ready yet. However if you see that message
	more than 10 times then something is probably wrong with the ROC or its models.

	Start the 4G SD-CORE
	--------------------

	If you are installing the 5G SD-CORE, you can skip this step.

	To deploy the 4G SD-CORE and run a simple ping test::

	make test

	By default the above commands install the 4G SD-CORE from the local charts in the Git repos cloned
	earlier. In order to install the SD-CORE using the latest published charts, add CHARTS=latest
	to the command, e.g.,::

	CHARTS=latest make test

	To install the Aether 2.0 release, add CHARTS=release-2.0::

	CHARTS=release-2.0 make test

	Start the 5G SD-CORE
	--------------------

	If you have already installed the 4G SD-CORE, you must skip this step. Only one version of
	the SD-CORE can be installed at a time.

	To deploy the 5G SD-CORE and run a test with gNBSim that performs Registration + UE-initiated
	PDU Session Establishment + sends User Data packets::

	make 5g-test

	By default the above commands install the 5G SD-CORE from the local charts in the Git repos cloned
	earlier. In order to install the SD-CORE using the latest published charts, add CHARTS=latest
	to the command, e.g.,::

	CHARTS=latest make 5g-test

	To install the Aether 2.0 release, add CHARTS=release-2.0::

	CHARTS=release-2.0 make 5gc

	NOTE: The 5g-test target is not supported in Aether-1.6, but you can use the 5gc target
	to build the 5G core.

	To change the behavior of the test run by gNBSim, change the contents of gnb.conf
	in sd-core-5g-values.yaml. Consult the
	`gNBSim documentation <https://docs.sd-core.opennetworking.org/master/developer/gnbsim.html>`_ for more information.

	Exploring AiaB
	--------------

	The kubectl tool is the best way to get familiar with the pods and other Kubernetes objects installed by AiaB.
	The SD-CORE services, UPF, and simulated edge devices run in the omec namespace, while the ROC is running
	in the aether-roc namespace.

	The ROC GUI is available on port 31194 on the host running AiaB.

	Cleanup
	-------

	The first time you build AiaB, it takes a while because it sets up the Kubernetes cluster.
	Subsequent builds will be much faster if you follow these steps to clean up the Helm charts without
	destroying the Kubernetes cluster.

	* Clean up the 4G SD-CORE: make reset-test
	* Reset the 4G UE / eNB in order to re-run the 4G test: make reset-ue
	* Clean up the 5G SD-CORE: make reset-5g-test
	* Clean up the ROC: make roc-clean

	It's normal for the above commands to take a minute or two to complete.

	As an example, suppose that you want to test the 4G SD-CORE with the ROC, and then the 5G SD-CORE
	with the ROC. You could run these commands::

	CHARTS=latest make roc-4g-models # Install ROC with 4G configuration
	CHARTS=latest make test # Install 4G SD-CORE and run ping test
	make reset-test
	make roc-clean
	CHARTS=latest make roc-5g-models # Install ROC with 5G configuration
	CHARTS=latest make 5g-test # Install 5G SD-CORE and run gNB Sim test
	make reset-5g-test
	make roc-clean

	Developer Loop
	--------------

	Suppose you wish to test a new build of a 5G SD-CORE services. You can deploy custom images
	by editing `~/aether-in-a-box/sd-core-5g-values.yaml`, for example::

	omec-control-plane:
	images:
	tags:
	webui: registry.aetherproject.org/omecproject/5gc-webui:onf-release3.0.5-roc-935305f
	pullPolicy: IfNotPresent

	To upgrade a running 5G SD-CORE with the new image, or to deploy the 5G SD-CORE with the image::

	make reset-5g-test; make 5g-test

	Troubleshooting / Known Issues
	------------------------------

	If you suspect a problem, first verify that all pods are in Running state::

	kubectl -n omec get pods
	kubectl -n aether-roc get pods

	4G Test Fails
	^^^^^^^^^^^^^
	Occasionally make test (for 4G) fails for unknown reasons; this is true regardless of which Helm charts are used.
	If this happens, first try recreating the simulated UE / eNB and re-running the test as follows::

	make reset-ue
	make test

	If that does not work, try cleaning up AiaB as described above and re-building it.

	If make test fails consistently, check whether the configuration has been pushed to the SD-CORE::

	kubectl -n omec logs config4g-0 \| grep "Successfully"

	You should see that a device group and slice has been pushed::

	[INFO][WebUI][CONFIG] Successfully posted message for device group 4g-oaisim-user to main config thread
	[INFO][WebUI][CONFIG] Successfully posted message for slice default to main config thread

	Then tail the config4g-0 log and make sure that the configuration has been successfully pushed to all
	SD-CORE components.