blob: 8c276337c4b0655c523544ec5f971a28ec4d6159 [file] [log] [blame]
..
SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
SPDX-License-Identifier: Apache-2.0
Runtime Operational Control (ROC)
=================================
Purpose
-------
The Aether Runtime Operation Control (ROC) is a component designed with the primary purpose of managing the
Aether Connectivity Service (ACS), including facilitating the integration of edge services with the ACS.
The Aether ROC allows enterprises to configure subscribers and profiles, as well as implement policies related
to those profiles. It also allows the Aether operations team to configure the parameters of those policies.
The ROC is one of many subsystems that make up the Aether Management Platform (AMP).
What the ROC *does* do:
- Add/Update/Delete/Query configuration
- Persist configuration
- Push configuration to services and devices
- Make observations actionable, either manually or automatically
What the ROC *does not* do:
- The ROC does not directly deploy or manage the lifecycle of containers.
This is done using the Terraform/Rancher/Helm/Kubernetes stack.
- The ROC does not directly collect or store logging or metric information.
This is done using the ElasticStack and Grafana/Prometheus components.
- The ROC is not a message bus used for component-to-component communication.
If a message bus is required, then a suitable service such as Kafka could be used.
- The ROC does not implement a service dependency graph.
This can be done through helm charts, which are typically hierarchical in nature.
- The ROC is not a formal service mesh.
Other tools, such as Istio, could be leveraged to provide service meshes.
- The ROC does not configure *Edge Services*.
While the ROCs modeling support is general and could be leveraged to support an edge service, and an
adapter could be written to configure an edge service, promoting an edge service to ROC management would
be the exception rather than the rule. Edge services have their own GUIs and APIs, perhaps belonging to
a 3rd-party service provider.
Although we call out the tasks that ROC doesnt do itself, its often still necessary for the ROC to be aware
of the actions these other components have taken.
For example, while the ROC doesnt implement a service dependency graph, it is the case that the ROC is aware
of how services are related. This is necessary because some of the actions it takes affect multiple services
(e.g., a ROC-supported operation on a subscriber profile might result in the ROC making calls to SD-Core,
SD-RAN, and SD-Fabric).
Throughout the design process, the ROC design team has taken lessons learned from prior systems, such as XOS,
and applied them to create a next generation design that focuses on solving the configuration problem in a
focused and lightweight manner.
Design and Requirements
-----------------------
- The ROC must offer an *API* that may be used by administrators, as well as external services, to configure
Aether.
- This ROC API must support new end-to-end abstractions that cross multiple subsystems of Aether.
For example, give subscriber X running application Y QoS guarantee Z'' is an abstraction that potentially
spans SD-RAN, SD-Fabric.
The ROC defines and implements such end-to-end abstractions.
- The ROC must offer an *Operations GUI* to Operations Personnel, so they may configure the Aether Connectivity
service.
- The ROC must offer an *Enterprise GUI* to Enterprise Personnel, so they may configure the connectivity aspects
of their particular edge site.
Its possible this GUI shares implementation with the Operations GUI, but the presentation, content, and
workflow may differ.
- The ROC must support *versioning* of configuration, so changes can be rolled back as necessary, and an audit
history may be retrieved of previous configurations.
- The ROC must support best practices of *performance*, *high availability*, *reliability*, and *security*.
- The ROC must support *role-based access controls (RBAC)*, so that different parties have different visibility
into the data model.
- The ROC must be extensible.
Aether will incorporate new services over time, and existing services will evolve.
Data Model
----------
An important aspect of the ROC is that it maintains a data model that represents all the abstractions, such as
subscribers and profiles, it is responsible for.
The ROCs data model is based on YANG specifications.
YANG is a rich language for data modeling, with support for strong validation of the data stored in the models.
YANG allows relations between objects to be specified, adding a relational aspect that our previous approaches
(for example, protobuf) did not directly support.
YANG is agnostic as to how the data is stored, and is not directly tied to SQL/RDBMS or NoSQL paradigms.
ROC uses tooling built around aether-config (an ONOS-based microservice) to maintain a set of YANG models.
Among other things, aether-config implements model versioning.
Migration from one version of the data model to another is supported, as is simultaneous operation of
different versions.
Architecture
------------
Below is a high-level architectural diagram of the ROC:
.. image:: images/aether-architecture.svg
The following walks through the main stack of ROC components in a top-down manner, starting with the GUI(s) and
ending with the devices/services.
Operations Portal / Enterprise Portal
"""""""""""""""""""""""""""""""""""""
The code base for the Operations Portal and Enterprise Portal is shared.
They are two different perspectives of the same portal.
The *Operations Portal* presents a rougher, more expansive view of the breadth of the Aether modeling.
The Enterprise Portal presents a more curated view of the modeling.
These different perspectives can be enforced through the following:
- RBAC controls, to limit access to information that might be unsuitable for a particular party.
- Dashboards, to aggregate/present information in an intuitive manner
- Multi-step workflows (aka Wizards) to break a complex task into smaller guided steps.
The *Portal* is an angular-based typescript GUI.
The GUI uses REST API to communicate with the aether-roc-api layer, which in turn communicates with aether-config
via gNMI.
The GUI implementation is consistent with modern GUI design, implemented as a single-page application and includes
a “commit list” that allows several changes to be atomically submitted together.
Views within the GUI are handcrafted, and as new models are added to Aether, the GUI must be adapted to incorporate
the new models.
The Portal is a combination of control and observation.
The control aspect relates to pushing configuration, and the observation aspect relates to viewing metrics,
logging, and alerts.
The Portal will leverage other components to do some of the heavy lifting.
For example, it would make no sense for us to implement our own graph-drawing tool or our own metrics querying
language when Grafana and Prometheus are already able to do that and we can leverage them.
GUI pages can be constructed that embed the Grafana renderer.
aether-roc-api
""""""""""""""
Aether-roc-api a REST API layer that sits between the portals and aether-config.
The southbound layer of aether-roc-api is gNMI.
This is how aether-roc-api talks to aether-config.
Aether-roc-api at this time is entirely auto-generated; developers need not spend time manually creating REST APIs
for their models.
The API layer serves multiple purposes:
- gNMI is an inconvenient interface to use for GUI design, and REST is expected for GUI development.
- The API layer is a potential location for early validation and early security checking, allowing errors to be caught
closer to the user.
This allows error messages to be generated in a more customary way than gNMI.
- The API layer is yet another place for semantic translation to take place.
Although the API layer is currently auto-generated, it is possible that additional methods could be added.
gNMI supports only “GET” and “SET”, whereas the aether-roc-api natively supports “GET”, “PUT”, “POST”, “PATCH”,
and “DELETE”.
aether-config
"""""""""""""
*Aether-config* (a Aether-specific deployment of the \ *onos-config*\ microservice) is the core of the ROCs
configuration system.
Aether-config is a component that other teams may use in other contexts.
Its possible that an Aether deployment might have multiple instances of aether-config used for independent purposes.
The job of aether-config is to store and version configuration data.
Configuration is pushed to aether-config through the northbound gNMI interface, is stored in an Atomix database
(not shown in the figure), and is pushed to services and devices using a southbound gNMI interface.
Adapters
""""""""
Not every device or service beneath the ROC supports gNMI, and in the case where it is not supported, an adapter is
written to translate between gNMI and the devices or services native API.
For example, a gNMI REST adapter exists to translate between the ROCs modeling and the Aether Connectivity
Control (SD-Core) components. The adapter is not necessarily only a syntactic translation, but may also be a
semantic translation.
[1]_ This supports a logical decoupling of the models stored in the ROC and the interface used by the southbound
device/service, allowing the southbound device/service and the ROC to evolve independently.
It also allows for southbound devices/services to be replaced without affecting the northbound interface.
Workflow Engine
"""""""""""""""
The workflow engine, to the left of the aether-config stack, is where multi-step workflows may be implemented.
At this time we do not have these workflows, but during the experience with SEBA/VOLTHA, we learned that workflow
became a key aspect of the implementation.
For example, SEBA had a state machine surrounding how devices were authorized, activated, and deactivated.
The workflow engine is a placeholder where workflows may be implemented in Aether as they are required.
Another use of the workflow engine may be to translate between levels in modeling.
For example, the workflow engine may examine the high-level Enterprise modeling and make changes to the Operations
modeling to achieve the Enterprise behavior.
Previously this component was referred to as “onos-ztp”.
It is expected that a workflow engine would both read and write the aether-config data model, as well as respond to
external events.
Analytics Engine
""""""""""""""""
The analytics engine, to the right of the aether-config stack, is where enrichment of analytics will be performed.
Raw metrics and logs are collected with open source components Grafana/Prometheus and ElasticStack.
Those metrics might need additional transformation before they can be presented to Enterprise users, or in some
cases even before they are presented to the Ops team.
The Analytics engine would be a place where those metrics could be transformed or enriched, and then written back
to Prometheus or Elastic (or forwarded as alerts).
The analytics engine is also where analytics would be related to config models in aether-config, in order for
Enterprise or Operations personnel to take action in response to data and insights received through analytics.
Action doesn’t necessarily have to involve humans.
It is expected that the combination of Analytics Engine and Workflow Engine could automate a response.
The analytics engine also provides an opportunity to implement access control from the telemetry API.
Prometheus itself is not multi-tenant and does not support fine-grained access controls.
Aether Operator
"""""""""""""""
Not pictured in the diagram is the ONOS Operator, which is responsible for configuring the models within
aether-config. Models to load are specified by a helm chart.
The operator compiles them on demand and incorporates them into aether-config.
This eliminates dynamic load compatibility issues that were previously a problem with building models and
aether-config separately. Operators are considered a best practice in Kubernetes.
Modules are loaded into the process primarily for performance and simplicity reasons.
The design team has had experience with other systems (for example, Voltha and XOS) where modules were decoupled
and message buses introduced between them, but that can lead to both complexity issues and performance bottlenecks
in those systems. The same module and operator pattern will be applied to aether-roc-api.
Aether Modeling
---------------
There is no fixed distinction between high-level and low-level modeling in the ROC.
There is one set of Aether modeling that might have customer-facing and internal-facing aspects.
.. image:: images/aether-highlevel.svg
The above diagram is an example of how a single set of models could serve both high-level and low-level needs and
is not necessarily identical to the current implementation.
For example, *App* and *Service* are concepts that are necessarily enterprise-facing.
*UPF*\ s are concepts that are operator-facing.
A UPF might be used by a Service, but the customer need not be aware of this detail.
Similarly, some objects might be partially customer-facing and partially operator-facing.
For example, a *Radio* is a piece of hardware the customer has deployed on his premises, so he must know of it, but
the configuration details of the radio (signal strength, IP address, etc) are operator-facing.
An approximation of the current Aether-3.0 (Release 1.5) modeling is presented below:
.. image:: images/aether-3.0-models.svg
The key Enterprise-facing abstractions are *Applicatio*\ n, *Virtual Cellular Service* (VCS), and *DeviceGroup*.
Identity Management
-------------------
The ROC leverages an external identity database (i.e.
LDAP server) to store user data such as account names and passwords for users who are able to log in to the ROC.
This LDAP server also has the capability to associate users with groups, for example adding ROC administrators to
ONFAetherAdmin would be a way to grant those people administrative privileges within the ROC.
An external authentication service (DEX) is used to authenticate the user, handling the mechanics of accepting the
password, validating it, and securely returning the group the user belongs to.
The group identifier is then used to grant access to resources within the ROC.
The ROC leverages Open Policy Agent (OPA) as a framework for writing access control policies.
Securing Machine-to-Machine Communications
------------------------------------------
gNMI naturally lends itself to mutual TLS for authentication, and that is the recommended way to secure
communications between components that speak gNMI.
For example, the communication between aether-config and its adapters uses gNMI and therefore uses mutual TLS.
Distributing certificates between components is a problem outside the scope of the ROC.
Its assumed that another tool will be responsible for distribution, renewing certificates before they expire, etc.
For components that speak REST, HTTPS is used to secure the connection, and authentication can take place using
mechanisms within the HTTPS protocol (basic auth, tokens, etc).
Oath2 and OpenID Connect are leveraged as an authorization provider when using these REST APIs.
.. [1]
Adaptors are an ad hoc approach to implementing the workflow engine,
where they map models onto models, including the appropriate semantic
translation. This is what we originally did in XOS, but we prefer a
more structured approach for ROC.